Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2511.15492

Optomechanical disk resonator in the quantum ground state of motion

Andrea Barbero, Samuel Pautrel, Bertrand Evrard, Jérémy Bon, Romain Dezert, Aristide Lemaître, Adrien Borne, Ivan Favero

quant-phSubmitted Nov 19, 2025• Announced Nov 20, 2025
arXivHTMLPDF

Abstract

Although they have enabled several advances in the field of optomechanics, optomechanical disk resonators have not yet been operated in the quantum regime. We present the first experimental demonstration of an optomechanical disk resonator prepared in the quantum ground state. With a gigahertz frequency, the mechanical breathing mode of the investigated semiconductor disk reaches a level of excitation below a single phonon when cooled in a dilution refrigerator. We quantify the phonon occupancy of the mechanical mode by performing Brillouin sideband spectroscopy: a conical optical fiber is evanescently coupled to the disk optical whispering-gallery mode, and Stokes and anti-Stokes photons scattered by phonon emission and absorption are counted on a single-photon detector. We measure a suppression of the absorption process corresponding to a phonon occupancy of $0.66\pm0.20$. We experimentally investigate the mechanisms ruling laser-induced heating, which limits the lowest measurable phonon occupancy, and notably witness an extra-cavity heating effect.

Related papers

Boosted Optomechanics with a Fluid of Nonlinear Polaritons

Florent Malabat, Martin Colombano, Titouan Lévêque +4 more

Merging optomechanics and polaritonics opens stimulating perspectives like the giant enhancement of optomechanical interaction and the enrichment of optomechanics with effective nonlinear photons. The experimental implementation of these concepts has however remained elusive. Here we report on the resonant optical control of polaritonic optomechanical resonators constituted of semiconductor disks embedding quantum wells. Whispering gallery photons and quantum well excitons strongly couple, leading to the emergence of polaritons that couple to the mechanical vibrations of the disk. We perform resonant optomechanical frequency response experiments on these resonators, modeled introducing a minimal set of constitutive equations, from which we extract the polariton-modified optomechanical coupling $g_0$ and the polariton nonlinearities. We observe a boost of $g_0$ by more than a decade compared to bare photons, reaching to a record $g_0$ for whispering gallery resonators of $22$ MHz, and analyze experimentally and theoretically its evolution as function of the polariton's composition. We also measure a clear hierarchy of three polaritonic nonlinearities, again analyzed as function of polariton composition, establishing a bridge between past unconciliated reports in polaritonics. Grounded on experimental and theoretical foundations, resonant polaritonic optomechanics is set ready for an optomechanical exploration of quantum fluids of polaritons.

quant-pharXiv:2606.31721•Jul 1, 2026

Heralded Single-Phonon Preparation, Storage, and Readout in Cavity Optomechanics

Christophe Galland, Nicolas Sangouard, Nicolás Piro +2 more

We show how to use the radiation pressure optomechanical coupling between a mechanical oscillator and an optical cavity field to generate in a heralded way a single quantum of mechanical motion (a Fock state). Starting with the oscillator close to its ground state, a laser pumping the upper motional sideband produces correlated photon-phonon pairs via optomechanical parametric down-conversion. Subsequent detection of a single scattered Stokes photon projects the macroscopic oscillator into a single-phonon Fock state. The nonclassical nature of this mechanical state can be demonstrated by applying a readout laser on the lower sideband to map the phononic state to a photonic mode and performing an autocorrelation measurement. Our approach proves the relevance of cavity optomechanics as an enabling quantum technology.

arXiv:1312.4303•Physical Review Letters•Apr 9, 2014•140 citations

Observation of Quantum Motion in a Nanogram-scale Object

Dong‐Hun Lee, Mitchell Underwood, David L. Mason +4 more

We describe measurements of the motional sidebands produced by a mechanical oscillator (with effective mass 43 ng and resonant frequency 705 kHz) that is placed in an optical cavity and cooled close to its quantum ground state. The red and blue sidebands (corresponding to Stokes and anti-Stokes scattering) from a single laser beam are recorded simultaneously via a heterodyne measurement. The oscillator's mean phonon number n is inferred from the ratio of the sidebands, and reaches a minimum value of 0.84 +- 0.22 (corresponding to a mode temperature T = 28 +- 7 microK). We also infer n from the calibrated area of each of the two sidebands, and from the oscillator's total damping. The values of n inferred from these four methods are in close agreement. The behavior of the sidebands as a function of the oscillator's temperature agrees well with theory that includes the quantum fluctuations of both the cavity field and the mechanical oscillator.

•Jun 27, 2014•6 citations

Suppression of Stokes heating processes and improved optomechanical cooling with frequency modulation

Yang Bao, Qinghong Liao, Qingmin Zhao +1 more

Abstract Ground-state cooling of mesoscopic mechanical objects is still a major challenge in the unresolved-sideband regime. We present a frequency modulation (FM) scheme to achieve cooling of the mechanical resonator to its ground-state in a double-cavity optomechanical system containing a mechanical resonator. The mean phonon number is determined by numerically solving a set of differential equations derived from the quantum master equations. Due to efficient suppression of Stokes heating processes in the presence of FM, the ground-state cooling, indicated by numerical calculations, is significantly achievable, regardless of whether in the resolved-sideband regime or the unresolved-sideband regime. Furthermore, by choosing parameters reasonably, the improvement of the quantum cooling limit is found to be capable of being positively correlated with the modulation frequency. This method provides new insight into quantum manipulation and creates more possibilities for applications of quantum devices.

Communications in Theoretical Physics•Feb 16, 2022•2 citations

Optomechanical measurement of a millimeter-sized mechanical oscillator approaching the quantum ground state

J T Santos, Jian Li, Jesper Ilves +2 more

Cavity optomechanics is a tool to study the interaction between light and micromechanical motion. Here we observe optomechanical physics in a truly macroscopic oscillator close to the quantum ground state. As the mechanical system, we use a mm-sized piezoelectric quartz disk oscillator. Its motion is coupled to a charge qubit which translates the piezo-induced charge into an effective radiation–pressure interaction between the disk and a microwave cavity. We measure the thermal motion of the lowest mechanical shear mode at 7 MHz down to 30 mK, corresponding to roughly 10 2 quanta in a 20 mg oscillator. We estimate that with realistic parameters, it is possible to utilize the back-action cooling by the qubit in order to control macroscopic motion by a single Cooper pair. The work opens up opportunities for macroscopic quantum experiments.

arXiv:1609.08469•New Journal of Physics•Oct 13, 2017•20 citations

Optomechanical cooling with simultaneous intracavity and extracavity squeezed light

Shasha Zheng, Feng-Xiao Sun, Muhammad Asjad +6 more

We propose an alternative experimentally feasible approach to achieve high-efficiency ground-state cooling of a mechanical oscillator in an optomechanical system under the deeply unresolved sideband condition with the assistance of both intracavity and extracavity squeezing. In the scheme, a degenerate optical parametric amplifier is placed inside the optical cavity, generating the intracavity squeezing; in addition, the optical cavity is driven by the extracavity squeezed light, namely the extracavity squeezing. The quantum interference effect generated by intracavity squeezing and extracavity squeezing can completely suppress the nonresonant Stokes heating process while greatly enhancing the anti-Stokes cooling process. Therefore, the joint-squeezing scheme is capable of cooling the mechanical oscillators to their quantum ground state in a regime far away from the resolved sideband condition. Compared with other traditional optomechanical cooling schemes, the single-photon cooling rate in this joint-squeezing scheme can be tremendously enlarged by nearly three orders of magnitude. At the same time, the coupling strength required to achieve ground-state cooling can be significantly reduced. This scheme is promising for cooling large-mass and low-frequency mechanical oscillators, which provides a prerequisite for preparing and manipulating nonclassical states in macroscopic quantum systems and lays a significant foundation for quantum manipulation.

arXiv:2403.01179•Physical Review A•Dec 18, 2024•5 citations
Although they have enabled several advances in the field of optomechanics, optomechanical disk resonators have not yet been operated in the quantum regime. We present the first experimental demonstration of an optomechanical disk resonator prepared in the quantum ground state. With a gigahertz frequency, the mechanical breathing mode of the investigated semiconductor disk reaches a level of excitation below a single phonon when cooled in a dilution refrigerator. We quantify the phonon occupancy of the mechanical mode by performing Brillouin sideband spectroscopy: a conical optical fiber is evanescently coupled to the disk optical whispering-gallery mode, and Stokes and anti-Stokes photons scattered by phonon emission and absorption are counted on a single-photon detector. We measure a suppression of the absorption process corresponding to a phonon occupancy of 0.66±0.200.66\pm0.200.66±0.20. We experimentally investigate the mechanisms ruling laser-induced heating, which limits the lowest measurable phonon occupancy, and notably witness an extra-cavity heating effect.
Merging optomechanics and polaritonics opens stimulating perspectives like the giant enhancement of optomechanical interaction and the enrichment of optomechanics with effective nonlinear photons. The experimental implementation of these concepts has however remained elusive. Here we report on the resonant optical control of polaritonic optomechanical resonators constituted of semiconductor disks embedding quantum wells. Whispering gallery photons and quantum well excitons strongly couple, leading to the emergence of polaritons that couple to the mechanical vibrations of the disk. We perform resonant optomechanical frequency response experiments on these resonators, modeled introducing a minimal set of constitutive equations, from which we extract the polariton-modified optomechanical coupling g0g_0g0​ and the polariton nonlinearities. We observe a boost of g0g_0g0​ by more than a decade compared to bare photons, reaching to a record g0g_0g0​ for whispering gallery resonators of 222222 MHz, and analyze experimentally and theoretically its evolution as function of the polariton's composition. We also measure a clear hierarchy of three polaritonic nonlinearities, again analyzed as function of polariton composition, establishing a bridge between past unconciliated reports in polaritonics. Grounded on experimental and theoretical foundations, resonant polaritonic optomechanics is set ready for an optomechanical exploration of quantum fluids of polaritons.
We show how to use the radiation pressure optomechanical coupling between a mechanical oscillator and an optical cavity field to generate in a heralded way a single quantum of mechanical motion (a Fock state). Starting with the oscillator close to its ground state, a laser pumping the upper motional sideband produces correlated photon-phonon pairs via optomechanical parametric down-conversion. Subsequent detection of a single scattered Stokes photon projects the macroscopic oscillator into a single-phonon Fock state. The nonclassical nature of this mechanical state can be demonstrated by applying a readout laser on the lower sideband to map the phononic state to a photonic mode and performing an autocorrelation measurement. Our approach proves the relevance of cavity optomechanics as an enabling quantum technology.
We describe measurements of the motional sidebands produced by a mechanical oscillator (with effective mass 43 ng and resonant frequency 705 kHz) that is placed in an optical cavity and cooled close to its quantum ground state. The red and blue sidebands (corresponding to Stokes and anti-Stokes scattering) from a single laser beam are recorded simultaneously via a heterodyne measurement. The oscillator's mean phonon number n is inferred from the ratio of the sidebands, and reaches a minimum value of 0.84 +- 0.22 (corresponding to a mode temperature T = 28 +- 7 microK). We also infer n from the calibrated area of each of the two sidebands, and from the oscillator's total damping. The values of n inferred from these four methods are in close agreement. The behavior of the sidebands as a function of the oscillator's temperature agrees well with theory that includes the quantum fluctuations of both the cavity field and the mechanical oscillator.
Abstract Ground-state cooling of mesoscopic mechanical objects is still a major challenge in the unresolved-sideband regime. We present a frequency modulation (FM) scheme to achieve cooling of the mechanical resonator to its ground-state in a double-cavity optomechanical system containing a mechanical resonator. The mean phonon number is determined by numerically solving a set of differential equations derived from the quantum master equations. Due to efficient suppression of Stokes heating processes in the presence of FM, the ground-state cooling, indicated by numerical calculations, is significantly achievable, regardless of whether in the resolved-sideband regime or the unresolved-sideband regime. Furthermore, by choosing parameters reasonably, the improvement of the quantum cooling limit is found to be capable of being positively correlated with the modulation frequency. This method provides new insight into quantum manipulation and creates more possibilities for applications of quantum devices.
Cavity optomechanics is a tool to study the interaction between light and micromechanical motion. Here we observe optomechanical physics in a truly macroscopic oscillator close to the quantum ground state. As the mechanical system, we use a mm-sized piezoelectric quartz disk oscillator. Its motion is coupled to a charge qubit which translates the piezo-induced charge into an effective radiation–pressure interaction between the disk and a microwave cavity. We measure the thermal motion of the lowest mechanical shear mode at 7 MHz down to 30 mK, corresponding to roughly 10 2 quanta in a 20 mg oscillator. We estimate that with realistic parameters, it is possible to utilize the back-action cooling by the qubit in order to control macroscopic motion by a single Cooper pair. The work opens up opportunities for macroscopic quantum experiments.
We propose an alternative experimentally feasible approach to achieve high-efficiency ground-state cooling of a mechanical oscillator in an optomechanical system under the deeply unresolved sideband condition with the assistance of both intracavity and extracavity squeezing. In the scheme, a degenerate optical parametric amplifier is placed inside the optical cavity, generating the intracavity squeezing; in addition, the optical cavity is driven by the extracavity squeezed light, namely the extracavity squeezing. The quantum interference effect generated by intracavity squeezing and extracavity squeezing can completely suppress the nonresonant Stokes heating process while greatly enhancing the anti-Stokes cooling process. Therefore, the joint-squeezing scheme is capable of cooling the mechanical oscillators to their quantum ground state in a regime far away from the resolved sideband condition. Compared with other traditional optomechanical cooling schemes, the single-photon cooling rate in this joint-squeezing scheme can be tremendously enlarged by nearly three orders of magnitude. At the same time, the coupling strength required to achieve ground-state cooling can be significantly reduced. This scheme is promising for cooling large-mass and low-frequency mechanical oscillators, which provides a prerequisite for preparing and manipulating nonclassical states in macroscopic quantum systems and lays a significant foundation for quantum manipulation.