Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2511.12604

Electron Tunneling Enhances Thermal Conductance through Metal-Insulator-Semiconductor Junctions

Yizhe Liu, Bo Sun

cond-mat.mes-hallphysics.app-phquant-phSubmitted Nov 16, 2025• Announced Nov 18, 2025
arXivHTMLPDF

Abstract

The presence of interfaces in semiconductor devices substantially hinders thermal transport, contributing disproportionately to the overall thermal resistance. However, approaches to enhance interfacial thermal transport remain scarce without changing the interface structure, as the intrinsic electron and phonon properties of constituent materials set an upper limit. Here, we find a new thermal transport pathway, electronic heat tunneling, to enhance interfacial thermal conductance through metal-insulator-semiconductor junctions. By applying photoexcitation or bias voltage, we observe remarkable thermal conductance increases in operando, opening a new channel for efficient interfacial heat dissipation. The electron quantum tunneling pathway is parallel to conventional phonon-mediated interfacial thermal transport, and violates the Wiedemann-Franz law since this pathway deviates from the paradigm of diffusive transport. Moreover, we develop a tunneling mismatch model to describe the enhanced thermal conductance, originating from tunneling heat flux. Our Letter demonstrates a previously unexplored heat transport mechanism to enhance thermal conductance, bypassing the need for interface engineering. These findings emphasize the essential need to understand semiconductor thermal properties under realistic operating conditions.

Comments
4 figures

Related papers

Highly efficient phase-tunable photonic thermal diode

G. Marchegiani, A. Braggio, F. Giazotto

We investigate the photon-mediated thermal transport between a superconducting electrode and a normal metal. When the quasiparticle contribution can be neglected, the photon-mediated channel becomes an efficient heat transport relaxation process for the superconductor at low temperatures, being larger than the intrinsic contribution due to the electron–phonon interaction. Furthermore, the superconductor–normal metal system acts as a nearly perfect thermal diode, with a rectification factor up to 108 for a realistic aluminum superconductor. The rectification factor can also be tuned in a phase-controlled fashion through a non-galvanic coupling, realized by changing the magnetic flux piercing a superconducting quantum interference device, which modifies the coupling impedance between the superconductor and the normal metal. The scheme can be exploited for passive cooling in superconducting quantum circuits by transferring heat toward normal metallic pads where it dissipates more efficiently or for more general thermal management purposes.

arXiv:2011.02777•Applied Physics Letters•Jan 11, 2021•17 citations

Thermal transport across a continuous metal-insulator transition

Prosenjit Haldar, M. S. Laad, Syed R. Hassan

The celebrated Wiedemann-Franz (WF) law is believed to be robust in metals as long as interactions between electrons preserve their fermion-quasiparticle character. We study thermal transport and the fate of the WF law close to a continuous metal-insulator transition (MIT) in the Falicov-Kimball model (FKM) using cluster-dynamical mean-field theory (CDMFT). Surprisingly, as for electrical transport, we find robust and novel quantum critical scaling in thermal transport across the MIT. We unearth the deeper reasons for these novel findings in terms of (i) the specific structure of energy-current correlations for the FKM and (ii) the microscopic electronic processes which facilitate energy transport while simultaneously blocking charge transport close to the MIT. However, within (C)DMFT, we also find that the WF law survives at $T\ensuremath{\longrightarrow}0$ in the incoherent metal right up to the MIT, even in absence of Landau quasiparticles.

arXiv:1607.03879•Physical review. B./Physical review. B•Sep 20, 2017•4 citations

The Wiedemann-Franz law in doped Mott insulators without quasiparticles

Wen O. Wang, Jixun K. Ding, Yoni Schattner +3 more

Many metallic quantum materials display anomalous transport phenomena that defy a Fermi liquid description. Here, we use numerical methods to calculate thermal and charge transport in the doped Hubbard model and observe a crossover separating high- and low-temperature behaviors. Distinct from the behavior at high temperatures, the Lorenz number [Formula: see text] becomes weakly doping dependent and less sensitive to parameters at low temperatures. At the lowest numerically accessible temperatures, [Formula: see text] roughly approaches the Wiedemann-Franz constant [Formula: see text], even in a doped Mott insulator that lacks well-defined quasiparticles. Decomposing the energy current operator indicates a compensation between kinetic and potential contributions, which may help to clarify the interpretation of transport experiments beyond Boltzmann theory in strongly correlated metals.

arXiv:2208.09144•Science•Nov 30, 2023•16 citations

Quantum heat transport and effects of quantum thermal devices in noncommuting coupled spins

Yitian Chen, Junran Kong, Huan Liu +1 more

Quantum heat transport governs energy exchange processes and statistical laws in non-equilibrium quantum systems, and plays a pivotal role in quantum thermodynamics. We investigate the steady-state thermal transport of a noncommuting coupled spin system. We employ the quantum dressed master equation approach within the framework of open quantum system theory to accurately analyze the non-equilibrium dynamics, ensuring the validity of transport results in the strong coupling regime. Our results demonstrate that noncommuting spin coupling serves as a significant resource for modulating the nonlinearity of the heat current. Specifically, in the weak spin-coupling regime, the system exhibits robust negative differential thermal conductance (NDTC) across various spin numbers. By deriving analytical expressions for the heat current in both the single-spin and large-spin limits, we reveal that this NDTC behavior is governed by microscopic cycle fluxes. Physically, this arises because spin excitation channels induced by the cold reservoir are suppressed under a large temperature bias, thereby blocking energy exchange cycles. Conversely, in the strong spin-coupling and large temperature bias regime, the quantum system demonstrates pronounced thermal rectification. This high rectification efficiency originates from the unidirectional saturation of the heat current, rendering the system a promising candidate for high-performance thermal diodes. Furthermore, we extend the model to a three-terminal configuration to construct a quantum thermal transistor. By manipulating the temperature of the gate reservoir, we achieve efficient modulation and amplification of heat flow between the source and drain. The heat amplification factor is shown to far exceed unity in specific operating regions, confirming significant thermal amplification.

cond-mat.mes-hallCross-listedarXiv:2609.29430•Sep 25, 2026

Josephson energy of superconducting junctions: amorphous versus crystalline tunnel barriers

Wanting Zhang, Aldilene Saraiva-Souza, Félix Beaudoin +3 more

The Josephson energy $E_J$ is a key parameter governing the properties of transmon superconducting qubits. In Al/AlO$_x$/Al junctions, $E_J$ is set by electron tunneling through an ultrathin oxide barrier and therefore depends exponentially on the atomic structure of the barrier. We compute $E_J$ by first-principles device modeling based on the NEGF-DFT quantum-transport method, comparing a junction with a crystalline Al$_2$O$_3$ barrier against ten junctions with melt--quenched amorphous Al$_2$O$_3$ barriers of the same thickness. From the Fermi-level transmission and the Ambegaokar--Baratoff relation, we obtain a mean $E_J/h$ of $2.78$ GHz for the amorphous ensemble, with a standard deviation of $4.67$ GHz, compared with $0.73$ GHz for the crystalline reference; individual amorphous values span nearly two orders of magnitude. Scattering-state analysis shows that transport is quantum tunneling and that the variability originates from stoichiometric inhomogeneity of the amorphous oxide: Al-rich, low-barrier regions can connect into percolation-like tunneling pathways that strongly enhance the conductance. A realistic $200\times200$ nm$^2$ junction self-averages over more than $2\times10^4$ such microscopic regions. These results establish a quantitative atomistic route from oxide microstructure to the superconducting-circuit energy scale $E_J$.

quant-pharXiv:2609.09426•Sep 10, 2026•1 citation

Thermally modulated SINIS transconductance amplifier

Giacomo Trupiano, Giorgio De Simoni, Francesco Giazotto

We introduce a superconducting transconductance amplifier based on the thermal modulation of a SINIS (Superconductor-Insulator-Normal metal-Insulator-Superconductor) configuration. The device is composed of a normal metal island interfaced with two superconducting leads through tunnel barriers, establishing a voltage-biased symmetric SINIS setup. An additional NIS junction connects the island to a third superconducting lead, which serves as input. When the input voltage surpasses the superconducting gap, the resultant injection of quasiparticles increases the electronic temperature of the island, thereby modulating the SINIS current. We perform numerical analyzes of the device performance, influenced by input voltage, frequency, and bath temperature. At bath temperatures below 250 mK, the device shows a transconductance exceeding 4 mS and a current gain exceeding 45 dB. Both gain and transconductance maintain their levels up to 1 MHz, but decrease at higher frequencies, with a -3 dB cutoff around 10 MHz, and an average power dissipation of approximately 5 nW. Our simulations reveal a fully voltage-controlled, three-terminal superconducting amplifier characterized by high transconductance and gain, achieved through thermally mediated signal transduction. This architectural design presents a promising avenue for cryogenic amplification with reduced power dissipation and compatibility with current superconducting electronic systems.

arXiv:2505.21341•Physical Review Applied•Dec 23, 2025•2 citations
The presence of interfaces in semiconductor devices substantially hinders thermal transport, contributing disproportionately to the overall thermal resistance. However, approaches to enhance interfacial thermal transport remain scarce without changing the interface structure, as the intrinsic electron and phonon properties of constituent materials set an upper limit. Here, we find a new thermal transport pathway, electronic heat tunneling, to enhance interfacial thermal conductance through metal-insulator-semiconductor junctions. By applying photoexcitation or bias voltage, we observe remarkable thermal conductance increases in operando, opening a new channel for efficient interfacial heat dissipation. The electron quantum tunneling pathway is parallel to conventional phonon-mediated interfacial thermal transport, and violates the Wiedemann-Franz law since this pathway deviates from the paradigm of diffusive transport. Moreover, we develop a tunneling mismatch model to describe the enhanced thermal conductance, originating from tunneling heat flux. Our Letter demonstrates a previously unexplored heat transport mechanism to enhance thermal conductance, bypassing the need for interface engineering. These findings emphasize the essential need to understand semiconductor thermal properties under realistic operating conditions.
We investigate the photon-mediated thermal transport between a superconducting electrode and a normal metal. When the quasiparticle contribution can be neglected, the photon-mediated channel becomes an efficient heat transport relaxation process for the superconductor at low temperatures, being larger than the intrinsic contribution due to the electron–phonon interaction. Furthermore, the superconductor–normal metal system acts as a nearly perfect thermal diode, with a rectification factor up to 108 for a realistic aluminum superconductor. The rectification factor can also be tuned in a phase-controlled fashion through a non-galvanic coupling, realized by changing the magnetic flux piercing a superconducting quantum interference device, which modifies the coupling impedance between the superconductor and the normal metal. The scheme can be exploited for passive cooling in superconducting quantum circuits by transferring heat toward normal metallic pads where it dissipates more efficiently or for more general thermal management purposes.
The celebrated Wiedemann-Franz (WF) law is believed to be robust in metals as long as interactions between electrons preserve their fermion-quasiparticle character. We study thermal transport and the fate of the WF law close to a continuous metal-insulator transition (MIT) in the Falicov-Kimball model (FKM) using cluster-dynamical mean-field theory (CDMFT). Surprisingly, as for electrical transport, we find robust and novel quantum critical scaling in thermal transport across the MIT. We unearth the deeper reasons for these novel findings in terms of (i) the specific structure of energy-current correlations for the FKM and (ii) the microscopic electronic processes which facilitate energy transport while simultaneously blocking charge transport close to the MIT. However, within (C)DMFT, we also find that the WF law survives at $T\ensuremath{\longrightarrow}0$ in the incoherent metal right up to the MIT, even in absence of Landau quasiparticles.
Many metallic quantum materials display anomalous transport phenomena that defy a Fermi liquid description. Here, we use numerical methods to calculate thermal and charge transport in the doped Hubbard model and observe a crossover separating high- and low-temperature behaviors. Distinct from the behavior at high temperatures, the Lorenz number [Formula: see text] becomes weakly doping dependent and less sensitive to parameters at low temperatures. At the lowest numerically accessible temperatures, [Formula: see text] roughly approaches the Wiedemann-Franz constant [Formula: see text], even in a doped Mott insulator that lacks well-defined quasiparticles. Decomposing the energy current operator indicates a compensation between kinetic and potential contributions, which may help to clarify the interpretation of transport experiments beyond Boltzmann theory in strongly correlated metals.
Quantum heat transport governs energy exchange processes and statistical laws in non-equilibrium quantum systems, and plays a pivotal role in quantum thermodynamics. We investigate the steady-state thermal transport of a noncommuting coupled spin system. We employ the quantum dressed master equation approach within the framework of open quantum system theory to accurately analyze the non-equilibrium dynamics, ensuring the validity of transport results in the strong coupling regime. Our results demonstrate that noncommuting spin coupling serves as a significant resource for modulating the nonlinearity of the heat current. Specifically, in the weak spin-coupling regime, the system exhibits robust negative differential thermal conductance (NDTC) across various spin numbers. By deriving analytical expressions for the heat current in both the single-spin and large-spin limits, we reveal that this NDTC behavior is governed by microscopic cycle fluxes. Physically, this arises because spin excitation channels induced by the cold reservoir are suppressed under a large temperature bias, thereby blocking energy exchange cycles. Conversely, in the strong spin-coupling and large temperature bias regime, the quantum system demonstrates pronounced thermal rectification. This high rectification efficiency originates from the unidirectional saturation of the heat current, rendering the system a promising candidate for high-performance thermal diodes. Furthermore, we extend the model to a three-terminal configuration to construct a quantum thermal transistor. By manipulating the temperature of the gate reservoir, we achieve efficient modulation and amplification of heat flow between the source and drain. The heat amplification factor is shown to far exceed unity in specific operating regions, confirming significant thermal amplification.
The Josephson energy EJE_JEJ​ is a key parameter governing the properties of transmon superconducting qubits. In Al/AlOx_xx​/Al junctions, EJE_JEJ​ is set by electron tunneling through an ultrathin oxide barrier and therefore depends exponentially on the atomic structure of the barrier. We compute EJE_JEJ​ by first-principles device modeling based on the NEGF-DFT quantum-transport method, comparing a junction with a crystalline Al2_22​O3_33​ barrier against ten junctions with melt--quenched amorphous Al2_22​O3_33​ barriers of the same thickness. From the Fermi-level transmission and the Ambegaokar--Baratoff relation, we obtain a mean EJ/hE_J/hEJ​/h of 2.782.782.78 GHz for the amorphous ensemble, with a standard deviation of 4.674.674.67 GHz, compared with 0.730.730.73 GHz for the crystalline reference; individual amorphous values span nearly two orders of magnitude. Scattering-state analysis shows that transport is quantum tunneling and that the variability originates from stoichiometric inhomogeneity of the amorphous oxide: Al-rich, low-barrier regions can connect into percolation-like tunneling pathways that strongly enhance the conductance. A realistic 200×200200\times200200×200 nm2^22 junction self-averages over more than 2×1042\times10^42×104 such microscopic regions. These results establish a quantitative atomistic route from oxide microstructure to the superconducting-circuit energy scale EJE_JEJ​.
We introduce a superconducting transconductance amplifier based on the thermal modulation of a SINIS (Superconductor-Insulator-Normal metal-Insulator-Superconductor) configuration. The device is composed of a normal metal island interfaced with two superconducting leads through tunnel barriers, establishing a voltage-biased symmetric SINIS setup. An additional NIS junction connects the island to a third superconducting lead, which serves as input. When the input voltage surpasses the superconducting gap, the resultant injection of quasiparticles increases the electronic temperature of the island, thereby modulating the SINIS current. We perform numerical analyzes of the device performance, influenced by input voltage, frequency, and bath temperature. At bath temperatures below 250 mK, the device shows a transconductance exceeding 4 mS and a current gain exceeding 45 dB. Both gain and transconductance maintain their levels up to 1 MHz, but decrease at higher frequencies, with a -3 dB cutoff around 10 MHz, and an average power dissipation of approximately 5 nW. Our simulations reveal a fully voltage-controlled, three-terminal superconducting amplifier characterized by high transconductance and gain, achieved through thermally mediated signal transduction. This architectural design presents a promising avenue for cryogenic amplification with reduced power dissipation and compatibility with current superconducting electronic systems.