Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.25294 · Quantum Science and Technology

Design and fabrication of metal-shielded fiber-cavity mirrors for ion-trap systems

CHEN Wei-Bin, Ding Fang, Cheng-Hao Zhang, Jin‐Ming Cui, Yun‐Feng Huang, Chuan-Feng Li, Guang‐Can Guo

Published Jan 13, 2026• 2 citations
arXivHTMLPDF

Abstract

Abstract Trapped ions in micro-cavities constitute a key platform for advancing quantum information processing and quantum networking. By providing an efficient light–matter interface within a compact architecture, they serve as highly efficient quantum nodes with strong potential for a scalable quantum network. However, in such systems, ion trapping stability is often compromised by surface charging effects, and nearby dielectric materials are known to cause a dramatic increase in the ion heating rate by several orders of magnitude. These challenges significantly hinder the practical implementation of ion trap systems integrated with micro-cavities. To overcome these limitations, we present the design and fabrication of metal-shielded fiber-cavity mirrors, enabling the stable realization of ion trap systems integrated with fiber cavities. Using this method, we constructed a needle ion trap integrated with a fiber Fabry–Pérot cavity and successfully achieved stable trapping of a single ion within the cavity. The measured ion heating rate was reduced by more than an order of magnitude compared with unshielded configurations. This work establishes a key technique toward fully integrated ion–photon interfaces for scalable quantum networks.

DOI
10.1088/2058-9565/ae379e

Related papers

Integrated fiber-mirror ion trap for strong ion-cavity coupling

B. Brandstätter, Andrew McClung, Klemens Schüppert +8 more

We present and characterize fiber mirrors and a miniaturized ion-trap design developed to integrate a fiber-based Fabry-Perot cavity (FFPC) with a linear Paul trap for use in cavity-QED experiments with trapped ions. Our fiber-mirror fabrication process not only enables the construction of FFPCs with small mode volumes, but also allows us to minimize the influence of the dielectric fiber mirrors on the trapped-ion pseudopotential. We discuss the effect of clipping losses for long FFPCs and the effect of angular and lateral displacements on the coupling efficiencies between cavity and fiber. Optical profilometry allows us to determine the radii of curvature and ellipticities of the fiber mirrors. From finesse measurements, we infer a single-atom cooperativity of up to 12 for FFPCs longer than 200 μm in length; comparison to cavities constructed with reference substrate mirrors produced in the same coating run indicates that our FFPCs have similar scattering losses. We characterize the birefringence of our fiber mirrors, finding that careful fiber-mirror selection enables us to construct FFPCs with degenerate polarization modes. As FFPCs are novel devices, we describe procedures developed for handling, aligning, and cleaning them. We discuss experiments to anneal fiber mirrors and explore the influence of the atmosphere under which annealing occurs on coating losses, finding that annealing under vacuum increases the losses for our reference substrate mirrors. X-ray photoelectron spectroscopy measurements indicate that these losses may be attributable to oxygen depletion in the mirror coating. Special design considerations enable us to introduce a FFPC into a trapped ion setup. Our unique linear Paul trap design provides clearance for such a cavity and is miniaturized to shield trapped ions from the dielectric fiber mirrors. We numerically calculate the trap potential in the absence of fibers. In the experiment additional electrodes can be used to compensate distortions of the potential due to the fibers. Home-built fiber feedthroughs connect the FFPC to external optics, and an integrated nanopositioning system affords the possibility of retracting or realigning the cavity without breaking vacuum.

arXiv:1311.6961•Review of Scientific Instruments•Dec 1, 2013•90 citations

Fibre-tip microcavities for enhanced ion-photon coupling in scalable quantum information networks

Péter Horák, Nina Podoliak, Hiroki Takahashi +1 more

Scalable quantum information processing requires efficient coupling between stationary qubits (trapped atoms, ions, NV centres, etc.) via “flying” single-photon qubits. Here we investigate the optimisation and integration of fibre-tip microcavities into radiofrequency ion traps to achieve (i) high-fidelity transfer of ion qubits onto single photons, (ii) low-loss coupling of cavity photons into single-mode optical fibre, and (iii) achieving conditions (i) and (ii) without disturbing the ion trap. Our cavities are fabricated by laser micro-machining the ends of optical fibres and subsequent coating with a thin dielectric mirror, giving rise to cavity mirrors with a Gaussian profile. These cavities allow for small mode volume and thus large ion-photon coupling fulfilling requirement (i), while simultaneously providing intrinsic coupling to optical fibres, requirement (ii), as long as mode matching between the cavity mode and the fibre mode can be achieved at the cavity mirror. Using a semi-analytical numerical method, we show that Gaussian-shaped mirrors can in fact be used to enhance ion-photon coupling beyond what is possible with more common spherical cavity mirrors. Ion traps are notoriously sensitive to the presence of dielectric materials such as cavity mirrors near the trap centre, preventing requirement (iii) from being achieved. We performed an extensive numerical study of five different common ion traps to find the optimum configurations for integrating fibre-tip cavities with minimised effects on the trapping potentials. We discuss these results and present simple and effective design rules for realising optimum ion-cavity based quantum networks.

•Sep 20, 2016•0 citations

Scalable ion–photon quantum interface based on integrated diffractive mirrors

Moji Ghadimi, Valdis Blūms, Benjamin G. Norton +9 more

Abstract Quantum networking links quantum processors through remote entanglement for distributed quantum information processing and secure long-range communication. Trapped ions are a leading quantum information processing platform, having demonstrated universal small-scale processors and roadmaps for large-scale implementation. Overall rates of ion–photon entanglement generation, essential for remote trapped ion entanglement, are limited by coupling efficiency into single mode fibers and scaling to many ions. Here, we show a microfabricated trap with integrated diffractive mirrors that couples 4.1(6)% of the fluorescence from a174Yb+ion into a single mode fiber, nearly triple the demonstrated bulk optics efficiency. The integrated optic collects 5.8(8)% of theπtransition fluorescence, images the ion with sub-wavelength resolution, and couples 71(5)% of the collected light into the fiber. Our technology is suitable for entangling multiple ions in parallel and overcomes mode quality limitations of existing integrated optical interconnects.

arXiv:1607.00100•npj Quantum Information•Jan 30, 2017•42 citations

Microfabricated Surface Trap and Cavity Integration for Trapped Ion Quantum Computing

Van Rynbach, Jacques André

Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.

•Jan 1, 2016•0 citations

Towards an integrated ion trap - cavity system with strong coupling for multiple ions

Jack Morphew

Precise control over internal states of atomic ions in ion traps has been possible for many years enabling high precision spectroscopy of atomic transitions. Trapped ions are suitable candidates for quantum information processing due to their long storage times, low decoherence rates and high readout efficiency. Recent advances in micro-machining fibre optic mirrors and integrated fibre optic-ion trap systems for cavity QED allows one to realise strong coupling between an ion and a cavity mode by reducing the mode volume. For strong ion-cavity coupling, deterministic transfer of quantum states between ions and photons is possible. We have designed and constructed a miniaturised linear Paul trap with an integrated optical cavity, intended for coupling multiple ions to the cavity mode. The RF-electrode separation is 50μm, while the endcap separation is 350μm. The endcap electrodes are narrow tubes of inner diameter 300μm allowing optical fibers through the tubes to form the cavity. The trap depth we calculate to be 650meV for a 10V applied potential at 20MHz. The 4P1⁄2→ 3D3⁄2 transition of the atomic ion 40Ca+ with Γ = 24π × 22MHz can be coupled to an optical fibre Fabry-Perot cavity with length of 380µm, finesse of 33,000 and cavity linewidth k = 2π ×11MHz.The ion-cavity coherent coupling g = 2π × 19:5MHz of this system will put it in single-ion strong coupling regime with cooperativity, C=1.5.

•Sep 1, 2016•0 citations

Integrating a fiber cavity into a wheel trap for strong ion–cavity coupling

Markus Teller, Viktor Messerer, Klemens Schüppert +6 more

We present an ion trap with an integrated fiber cavity, designed for strong coupling at the level of single ions and photons. The cavity is aligned to the axis of a miniature linear Paul trap, enabling simultaneous coupling of multiple ions to the cavity field. We simulate how charges on the fiber mirrors affect the trap potential, and we test these predictions with an ion trapped in the cavity. Furthermore, we measure micromotion and heating rates in the setup.

arXiv:2207.10500•AVS Quantum Science•Jan 25, 2023•23 citations
Abstract Trapped ions in micro-cavities constitute a key platform for advancing quantum information processing and quantum networking. By providing an efficient light–matter interface within a compact architecture, they serve as highly efficient quantum nodes with strong potential for a scalable quantum network. However, in such systems, ion trapping stability is often compromised by surface charging effects, and nearby dielectric materials are known to cause a dramatic increase in the ion heating rate by several orders of magnitude. These challenges significantly hinder the practical implementation of ion trap systems integrated with micro-cavities. To overcome these limitations, we present the design and fabrication of metal-shielded fiber-cavity mirrors, enabling the stable realization of ion trap systems integrated with fiber cavities. Using this method, we constructed a needle ion trap integrated with a fiber Fabry–Pérot cavity and successfully achieved stable trapping of a single ion within the cavity. The measured ion heating rate was reduced by more than an order of magnitude compared with unshielded configurations. This work establishes a key technique toward fully integrated ion–photon interfaces for scalable quantum networks.
We present and characterize fiber mirrors and a miniaturized ion-trap design developed to integrate a fiber-based Fabry-Perot cavity (FFPC) with a linear Paul trap for use in cavity-QED experiments with trapped ions. Our fiber-mirror fabrication process not only enables the construction of FFPCs with small mode volumes, but also allows us to minimize the influence of the dielectric fiber mirrors on the trapped-ion pseudopotential. We discuss the effect of clipping losses for long FFPCs and the effect of angular and lateral displacements on the coupling efficiencies between cavity and fiber. Optical profilometry allows us to determine the radii of curvature and ellipticities of the fiber mirrors. From finesse measurements, we infer a single-atom cooperativity of up to 12 for FFPCs longer than 200 μm in length; comparison to cavities constructed with reference substrate mirrors produced in the same coating run indicates that our FFPCs have similar scattering losses. We characterize the birefringence of our fiber mirrors, finding that careful fiber-mirror selection enables us to construct FFPCs with degenerate polarization modes. As FFPCs are novel devices, we describe procedures developed for handling, aligning, and cleaning them. We discuss experiments to anneal fiber mirrors and explore the influence of the atmosphere under which annealing occurs on coating losses, finding that annealing under vacuum increases the losses for our reference substrate mirrors. X-ray photoelectron spectroscopy measurements indicate that these losses may be attributable to oxygen depletion in the mirror coating. Special design considerations enable us to introduce a FFPC into a trapped ion setup. Our unique linear Paul trap design provides clearance for such a cavity and is miniaturized to shield trapped ions from the dielectric fiber mirrors. We numerically calculate the trap potential in the absence of fibers. In the experiment additional electrodes can be used to compensate distortions of the potential due to the fibers. Home-built fiber feedthroughs connect the FFPC to external optics, and an integrated nanopositioning system affords the possibility of retracting or realigning the cavity without breaking vacuum.
Scalable quantum information processing requires efficient coupling between stationary qubits (trapped atoms, ions, NV centres, etc.) via “flying” single-photon qubits. Here we investigate the optimisation and integration of fibre-tip microcavities into radiofrequency ion traps to achieve (i) high-fidelity transfer of ion qubits onto single photons, (ii) low-loss coupling of cavity photons into single-mode optical fibre, and (iii) achieving conditions (i) and (ii) without disturbing the ion trap. Our cavities are fabricated by laser micro-machining the ends of optical fibres and subsequent coating with a thin dielectric mirror, giving rise to cavity mirrors with a Gaussian profile. These cavities allow for small mode volume and thus large ion-photon coupling fulfilling requirement (i), while simultaneously providing intrinsic coupling to optical fibres, requirement (ii), as long as mode matching between the cavity mode and the fibre mode can be achieved at the cavity mirror. Using a semi-analytical numerical method, we show that Gaussian-shaped mirrors can in fact be used to enhance ion-photon coupling beyond what is possible with more common spherical cavity mirrors. Ion traps are notoriously sensitive to the presence of dielectric materials such as cavity mirrors near the trap centre, preventing requirement (iii) from being achieved. We performed an extensive numerical study of five different common ion traps to find the optimum configurations for integrating fibre-tip cavities with minimised effects on the trapping potentials. We discuss these results and present simple and effective design rules for realising optimum ion-cavity based quantum networks.
Abstract Quantum networking links quantum processors through remote entanglement for distributed quantum information processing and secure long-range communication. Trapped ions are a leading quantum information processing platform, having demonstrated universal small-scale processors and roadmaps for large-scale implementation. Overall rates of ion–photon entanglement generation, essential for remote trapped ion entanglement, are limited by coupling efficiency into single mode fibers and scaling to many ions. Here, we show a microfabricated trap with integrated diffractive mirrors that couples 4.1(6)% of the fluorescence from a174Yb+ion into a single mode fiber, nearly triple the demonstrated bulk optics efficiency. The integrated optic collects 5.8(8)% of theπtransition fluorescence, images the ion with sub-wavelength resolution, and couples 71(5)% of the collected light into the fiber. Our technology is suitable for entangling multiple ions in parallel and overcomes mode quality limitations of existing integrated optical interconnects.
Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.
Precise control over internal states of atomic ions in ion traps has been possible for many years enabling high precision spectroscopy of atomic transitions. Trapped ions are suitable candidates for quantum information processing due to their long storage times, low decoherence rates and high readout efficiency. Recent advances in micro-machining fibre optic mirrors and integrated fibre optic-ion trap systems for cavity QED allows one to realise strong coupling between an ion and a cavity mode by reducing the mode volume. For strong ion-cavity coupling, deterministic transfer of quantum states between ions and photons is possible. We have designed and constructed a miniaturised linear Paul trap with an integrated optical cavity, intended for coupling multiple ions to the cavity mode. The RF-electrode separation is 50μm, while the endcap separation is 350μm. The endcap electrodes are narrow tubes of inner diameter 300μm allowing optical fibers through the tubes to form the cavity. The trap depth we calculate to be 650meV for a 10V applied potential at 20MHz. The 4P1⁄2→ 3D3⁄2 transition of the atomic ion 40Ca+ with Γ = 24π × 22MHz can be coupled to an optical fibre Fabry-Perot cavity with length of 380µm, finesse of 33,000 and cavity linewidth k = 2π ×11MHz.The ion-cavity coherent coupling g = 2π × 19:5MHz of this system will put it in single-ion strong coupling regime with cooperativity, C=1.5.