Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.24082 · Physical Review A

Exploring the fidelity of flux-qubit measurement in different bases via the quantum flux parametron

Yanjun Ji, Susanna Kirchhoff, Frank K. Wilhelm

Published Mar 9, 2026• 1 citation
arXivHTMLPDF

Abstract

High-fidelity qubit readout is a fundamental requirement for practical quantum computing systems. In this work, we investigate methods to enhance the measurement fidelity of flux qubits via a quantum flux parametron-mediated readout scheme. Through theoretical modeling and numerical simulations, we analyze the impact of different measurement bases on fidelity in single-qubit and coupled two-qubit systems. For single-qubit systems, we show that energy bases consistently outperform flux bases in achieving higher fidelity. In coupled two-qubit systems, we explore two measurement models: sequential and simultaneous measurements, both aimed at reading out a single target qubit. Our results indicate that the highest fidelity can be achieved either by performing sequential measurement in a dressed basis over a longer duration or by conducting simultaneous measurement in a bare basis over a shorter duration. Importantly, the sequential measurement model consistently yields more robust and higher-fidelity readouts compared to the simultaneous approach. These findings quantify achievable fidelities and provide valuable guidance for optimizing measurement protocols in emerging quantum computing architectures.

DOI
10.1103/86jt-by9x

Related papers

Mitigating state-transition errors during readout with a synchronized flux pulse

Yulong Li, Wuerkaixi Nuerbolati, Chunqing Deng +3 more

State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.

arXiv:2507.14436•Physical Review Applied•Apr 21, 2026•4 citations

Efficient characterization of quantum nondemolition qubit readout

He Wang, Ya Cao

We study the quantitative characterization of the performance of qubit measurements in this paper. In particular, the back-action evading nature of quantum nondemolition (QND) readout of qubits is fully quantified by quantum trace distance. Only computational basis states are necessary to be taken into consideration. Most importantly, we propose an experimentally efficient method to evaluate the QND fidelity based on the classical trace distance, which uses an experimental scheme with two consecutive measurements. The three key quantifiers of a measurement, i.e., QND fidelity, readout fidelity, and projectivity, can be derived directly from the same experimental scheme. Besides, we present the relationships among these three factors. Theoretical simulation results for the dispersive readout of superconducting qubits show the validity of the proposed QND fidelity. Efficient quantification of measurement performance is of practical significance for the diagnosis, performance improvement, and design of measurement apparatuses.

arXiv:2208.05713•Aug 11, 2022•0 citations

Benchmarking the quality of multiplexed qubit readout beyond assignment fidelity

Andras Di Giovanni, Adrian Skasberg Aasen, Jürgen Lisenfeld +3 more

The accurate measurement of quantum two-level objects (qubits) is crucial for developing quantum computers. Over the last decade, the measure of choice for benchmarking readout routines for superconducting qubits has been assignment fidelity; however, this method only focuses on the preparation of computational basis states and therefore does not provide a complete characterization of the readout. Here, we expand the focus to the use of detector tomography to fully characterize multiqubit readout of superconducting transmon qubits. The impact of different readout parameters on the rate of information extraction is studied using quantum-state reconstruction infidelity as a proxy. The results are then compared with assignment fidelities, showing good agreement for separable two-qubit states. We therefore propose the rate of infidelity convergence as a validation tool for assignment fidelity and a more comprehensive benchmark for single- and multiqubit readout optimization. To make the best use of experimental resources, we investigate the most efficient distribution of a limited shot budget between detector tomography and state reconstruction within the context of single- and two-qubit experiments. To address the growing interest in three-qubit gates and test the scalability of the validation tool, we perform three-qubit quantum-state tomography that goes beyond conventional readout-error-mitigation methods and find a factor-of-30 reduction in quantum infidelity. Our results demonstrate that qubit readout correlations are not induced by a significantly reduced state distinguishability. Consequently, correlation coefficients can serve as a valuable tool in qubit readout optimization.

arXiv:2502.08589•Physical Review Applied•Sep 15, 2025•7 citations

Flux-qubit readout in the persistent-current basis at arbitrary bias points

Marius Schöndorf, Adrian Lupaşcu, Frank K. Wilhelm

Common flux-qubit readout schemes are qubit dominated, meaning they measure in the energy eigenbasis of the qubit. For various applications, measurements in a basis different from the energy eigenbasis are required. Here we present an indirect measurement protocol, which is detector dominated instead of qubit dominated, yielding projective measurements in the persistent-current basis for arbitrary bias points. We show that with our setup it is possible to perform a quantum nondemolition measurement in the persistent-current basis at all flux bias points with fidelities reaching almost $100%$.

arXiv:1904.13157•Physical Review A•Jan 8, 2020•2 citations

Improved fluxonium readout through dynamic flux pulsing

Taryn V. Stefanski, Yilmaz, Figen, Eugene Y. Huang +5 more

The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.

arXiv:2411.13437•Nov 20, 2024•14 citations

Above 99.9% Fidelity Single-Qubit Gates, Two-Qubit Gates, and Readout in a Single Superconducting Quantum Device

Fabian Marxer, Jakub Mrożek, Joona Andersson +64 more

Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.

arXiv:2508.16437•PRX Quantum•Mar 26, 2026•51 citations
High-fidelity qubit readout is a fundamental requirement for practical quantum computing systems. In this work, we investigate methods to enhance the measurement fidelity of flux qubits via a quantum flux parametron-mediated readout scheme. Through theoretical modeling and numerical simulations, we analyze the impact of different measurement bases on fidelity in single-qubit and coupled two-qubit systems. For single-qubit systems, we show that energy bases consistently outperform flux bases in achieving higher fidelity. In coupled two-qubit systems, we explore two measurement models: sequential and simultaneous measurements, both aimed at reading out a single target qubit. Our results indicate that the highest fidelity can be achieved either by performing sequential measurement in a dressed basis over a longer duration or by conducting simultaneous measurement in a bare basis over a shorter duration. Importantly, the sequential measurement model consistently yields more robust and higher-fidelity readouts compared to the simultaneous approach. These findings quantify achievable fidelities and provide valuable guidance for optimizing measurement protocols in emerging quantum computing architectures.
State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.
We study the quantitative characterization of the performance of qubit measurements in this paper. In particular, the back-action evading nature of quantum nondemolition (QND) readout of qubits is fully quantified by quantum trace distance. Only computational basis states are necessary to be taken into consideration. Most importantly, we propose an experimentally efficient method to evaluate the QND fidelity based on the classical trace distance, which uses an experimental scheme with two consecutive measurements. The three key quantifiers of a measurement, i.e., QND fidelity, readout fidelity, and projectivity, can be derived directly from the same experimental scheme. Besides, we present the relationships among these three factors. Theoretical simulation results for the dispersive readout of superconducting qubits show the validity of the proposed QND fidelity. Efficient quantification of measurement performance is of practical significance for the diagnosis, performance improvement, and design of measurement apparatuses.
The accurate measurement of quantum two-level objects (qubits) is crucial for developing quantum computers. Over the last decade, the measure of choice for benchmarking readout routines for superconducting qubits has been assignment fidelity; however, this method only focuses on the preparation of computational basis states and therefore does not provide a complete characterization of the readout. Here, we expand the focus to the use of detector tomography to fully characterize multiqubit readout of superconducting transmon qubits. The impact of different readout parameters on the rate of information extraction is studied using quantum-state reconstruction infidelity as a proxy. The results are then compared with assignment fidelities, showing good agreement for separable two-qubit states. We therefore propose the rate of infidelity convergence as a validation tool for assignment fidelity and a more comprehensive benchmark for single- and multiqubit readout optimization. To make the best use of experimental resources, we investigate the most efficient distribution of a limited shot budget between detector tomography and state reconstruction within the context of single- and two-qubit experiments. To address the growing interest in three-qubit gates and test the scalability of the validation tool, we perform three-qubit quantum-state tomography that goes beyond conventional readout-error-mitigation methods and find a factor-of-30 reduction in quantum infidelity. Our results demonstrate that qubit readout correlations are not induced by a significantly reduced state distinguishability. Consequently, correlation coefficients can serve as a valuable tool in qubit readout optimization.
Common flux-qubit readout schemes are qubit dominated, meaning they measure in the energy eigenbasis of the qubit. For various applications, measurements in a basis different from the energy eigenbasis are required. Here we present an indirect measurement protocol, which is detector dominated instead of qubit dominated, yielding projective measurements in the persistent-current basis for arbitrary bias points. We show that with our setup it is possible to perform a quantum nondemolition measurement in the persistent-current basis at all flux bias points with fidelities reaching almost 100100%100.
The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.
Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.