We report on the realization of a platform for trapping and manipulating individual 88Sr atoms in optical tweezers. A first cooling stage based on a blue shielded magneto-optical trap (MOT) operating on the |1S0⟩→|1P1⟩ transition at 461 nm enables us to trap approximately 4 × 106 atoms at a temperature of 6.8 mK. Further cooling is achieved in a narrow-line red MOT using the |1S0⟩→|3P1⟩ intercombination transition at 689 nm, bringing 5 × 105 atoms down to 5μK and reaching a density of 4 × 1010 cm3. Atoms are then loaded into 813 nm tweezer arrays generated by crossed acousto-optic deflectors and tightly focused onto the atoms with a high-numerical-aperture objective. Through light-assisted collision processes we achieve the collisional blockade, which leads to single-atom occupancy with a probability of about 50%. The trapped atoms are detected via fluorescence imaging with a fidelity of 99.986(6)%, while maintaining a survival probability of 97(2)%. The release-and-recapture measurement provides a temperature of 12.92(5)μK for the atoms in the tweezers, and the ultra-high-vacuum environment ensures a vacuum lifetime higher than 7 min. These results demonstrate a robust alkaline-earth tweezer platform that combines efficient loading, cooling, and high-fidelity detection, providing the essential building blocks for scalable quantum simulation and quantum information processing with Sr atoms.
We report on the realization of a platform for trapping and manipulating individual 88Sr atoms in optical tweezers. A first cooling stage based on a blue shielded magneto-optical trap (MOT) operating on the |1S0⟩→|1P1⟩ transition at 461 nm enables us to trap approximately 4 × 106 atoms at a temperature of 6.8 mK. Further cooling is achieved in a narrow-line red MOT using the |1S0⟩→|3P1⟩ intercombination transition at 689 nm, bringing 5 × 105 atoms down to 5μK and reaching a density of 4 × 1010 cm3. Atoms are then loaded into 813 nm tweezer arrays generated by crossed acousto-optic deflectors and tightly focused onto the atoms with a high-numerical-aperture objective. Through light-assisted collision processes we achieve the collisional blockade, which leads to single-atom occupancy with a probability of about 50%. The trapped atoms are detected via fluorescence imaging with a fidelity of 99.986(6)%, while maintaining a survival probability of 97(2)%. The release-and-recapture measurement provides a temperature of 12.92(5)μK for the atoms in the tweezers, and the ultra-high-vacuum environment ensures a vacuum lifetime higher than 7 min. These results demonstrate a robust alkaline-earth tweezer platform that combines efficient loading, cooling, and high-fidelity detection, providing the essential building blocks for scalable quantum simulation and quantum information processing with Sr atoms.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
Abstract We outline an experimental setup for efficiently preparing a tweezer array of 88Sr atoms. Our setup uses permanent magnets to maintain a steady-state two-dimensional magneto-optical trap (MOT) which results in a loading rate of up to 108 s−1 at 5 mK for the three-dimensional blue MOT. This enables us to trap 2 × 106 88Sr atoms at 2 μK in a narrow-line red MOT with the 1S0 → 3P1 intercombination transition at 689 nm. With the Sisyphus cooling and pairwise loss processes, single atoms are trapped and imaged in 813 nm optical tweezers, exhibiting a lifetime of 2.5 min. We further investigate the survival fraction of a single atom in the tweezers and characterize the optical tweezer array using a release and recapture technique. Our experimental setup serves as an excellent reference for those engaged in experiments involving optical tweezer arrays, cold atom systems, and similar research.
Engineering controllable, strongly interacting many-body quantum systems is at the frontier of quantum simulation and quantum information processing. Arrays of laser-cooled neutral atoms in optical tweezers have emerged as a promising platform because of their flexibility and the potential for strong interactions via Rydberg states. Existing neutral atom array experiments utilize alkali atoms, but alkaline-earth atoms offer many advantages in terms of coherence and control, and also open the door to new applications in precision measurement and time keeping. In this Letter, we present a technique to trap individual alkaline-earth-like ytterbium (Yb) atoms in optical tweezer arrays. The narrow ^{1}S_{0}-^{3}P_{1} intercombination line is used for both cooling and imaging in a magic-wavelength optical tweezer at 532 nm. The low Doppler temperature allows for imaging near the saturation intensity, resulting in a very high atom detection fidelity. We demonstrate the imaging fidelity concretely by observing rare (<1 in 10^{4} images) spontaneous quantum jumps into and out of a metastable state. We also demonstrate stochastic loading of atoms into a two-dimensional, 144-site tweezer array. This platform will enable advances in quantum information processing, quantum simulation, and precision measurement. The demonstrated narrow-line Doppler imaging may also be applied in tweezer arrays or quantum gas microscopes using other atoms with similar transitions, such as erbium and dysprosium.
Abstract We report on the trapping and imaging of individual ytterbium atoms in arrays of optical tweezers, loaded from a magneto-optical trap (MOT) formed by only five beams in an orthogonal configuration. In our five-beam MOT, operating on the narrow 1 S 0 → 3 P 1 intercombination transition, gravity balances the radiation pressure of a single upward-directed beam. This approach enables efficient trapping and cooling of the most common ytterbium isotopes ( 171 Yb, 173 Yb and 174 Yb) to ≲ 20 μ K at densities ∼ 10 11 atoms cm −3 within less than one second. This configuration allows for significantly reducing the complexity of the optical setup, potentially benefiting any ytterbium-atom based quantum science platform leveraging single-atom microscopy, from quantum processors to novel optical clocks. We then demonstrate the first single-atom-resolved imaging of the fermionic, large-spin isotope 173 Yb ( I = 5 / 2 ), employing a two-color imaging scheme that does not rely on magic-wavelength trapping. We achieve a high single-atom imaging fidelity of 99.96 ( 1 ) % and a large survival probability of 98.5 ( 2 ) % , despite large differential light shifts affecting all nuclear spin sublevels of the excited 3 P
We present the first successful trapping of single erbium atoms in an array of optical tweezers. Using a single narrow-line optical transition, we achieve deep cooling for direct tweezer loading, pairwise ejection, and continuous imaging without additional recoil suppression techniques. Our tweezer wavelength choice enables us to reach the magic trapping condition by tuning the ellipticity of the trapping light. Additionally, we implement an ultrafast high-fidelity fluorescence imaging scheme using a broad transition, allowing time-resolved study of the tweezer population dynamics from many to single atoms during light-assisted collisions. In particular, we extract a pair-ejection rate that qualitatively agrees with the semiclassical predictions by the Gallagher-Pritchard model. This Letter represents a promising starting point for the exploration of erbium as a powerful resource for quantum simulation in optical tweezers.
Qubits encoded in the electronic states of single atoms trapped in arrays of optical tweezers are a promising platform for a universal quantum computer. These qubits can be prepared in a well-defined quantum state, coherently manipulated using a nearresonant driving field, and their state detected with high fidelity. The most promising aspect of this platform is the large scalability, with arrays of up to 6100 qubits demonstrated[62].We present our progress in developing such a system with an array of single 85Rbatoms. We provide an overview of the experimental setup constructed for this purpose. Typically 50 atoms are loaded from a MOT into a 10×10 array of optical tweezers with sub-micrometer waists, with only a single atom present in a tweezer. The occupation of the tweezers is determined using a fluorescence image. We provide a characterisation of the trapping potentials experienced by the atoms. This characterisation is performed by measuring properties of the atoms in the tweezers, allowing for an in situ characterisation. In particular, the trap depth and trap frequencies were characterised. The temperature of the atoms after the initial fluorescence image was determined using the release and recapture technique [101] and the trapping lifetime of the atom was measured. With the ability to prepare, manipulate, and read out the electronic state of the atoms, an array of hyperfine qubits has been created. The qubits are encoded in the hyperfine clock states as |0⟩ := 52S1/2 |F = 2,mF = 0⟩ and |1⟩ := 52S1/2 |F = 3,mF = 0⟩. These long-lived first-order Zeeman shift insensitive states exhibit good coherence times, which we have characterized as T1=205 ± 3 ms , T2* = 2.01 ± 0.02 ms, andT2 echo = 67.1 ± 0.1 ms. State preparation is achieved by repetitions of optical and microwave pulses, to which the |0⟩ state is dark, allowing for population to accumulate in this state. The coherent evolution of the qubits have been performed using 3.035 GHz microwave radiation. The antenna used to produce this radiation is a home-built fullwave loop antenna. The antenna has allowed for addressing the qubits with Rabi frequencies up to Ω/2π ≈ 160 kHz. We have implemented the single-qubit Clifford gates using the global microwave drive. We determine using randomized benchmarking an166 Summary average gate fidelity of 0.99949(3), limited by Rabi frequency inhomogeneity over the array. To combat this fidelity limitation, we repeated the randomized benchmarking using the pulse length error robust SCROFULOUS pulses [135], which resulted in an increased gate fidelity of 0.999653(5). As a further extension of the capabilities of the system, we demonstrated a preliminary implementation of addressing a single atom int he array by applying a local Rz rotation to the selected qubit using a Stark shifting laser. The high level of control of the microwave radiation has allowed for an experimental verification of control noise-fidelity relations proposed by [115]. We have found good agreement between the experimentally measured fidelities and the proposed analytical relations developed using the stochastic Schrödinger equation. As a preliminary step towards implementing a two-qubit gate, we have performed coherent excitation of the |1⟩ state to the |r ⟩ :=602S1/2 |mJ = −1/2> Rydberg state using an off-resonant two-photon excitation. The low contrast of the Rabi oscillations on the |1⟩↔|r ⟩ transition was investigated using a simple Lindblad master equation based model. The largest contributors to the reduced contrast is SPAM error, intermediate state scattering and laser phase noise. Since Rydberg atoms interact via the van der Waals interaction, the spacing between atoms must be deterministically controlled. For this purpose, we have used an additional optical tweezer which can be dynamically moved using an acousto-optic deflector to rearrange the stochastically filled array into a desired configuration. By placing 2 atoms a distance ≈ 5 μm apart, we have demonstrated the p2 enhancement of the Rabi oscillation on the |1⟩↔|r ⟩ transition, a required first step towards implementing an entangling gate between the hyperfine qubits. To extend the temperature-limited T2* coherence time, we have implemented Λ-enhanced gray molasses cooling. We have opted to perform this cooling on the D2line as it is experimentally convenient to use this transition. Because using this transition for this purpose has not been reported in this isotope of Rb, we studied the efficacy of this cooling scheme under these circumstances. The reduced excited state hyperfine splitting of 85Rb compared to 87Rb has allowed for the study of the efficacy of this technique in the presence of additional transitions that may inhibit the cooling performance. Despite the challenges of the smaller hyperfine splitting, we have cooled the atoms to4.0±0.2 μK. This additional cooling is partially negated by the heating from the qubit state preparation procedure, but the additional cooling has allowed for the average T2*to be extended from ⟨T2*⟩ = 3.4 ± 0.1 ms to ⟨T2*⟩ = 5.3 ± 0.2 ms.