In this paper, we present an all-optical method to produce shell-shaped traps for ultracold atoms in microgravity. Our scheme exploits optical double dressing of the ground state to create a short range strongly repulsive central potential barrier. Combined with a long range attractive central potential, this barrier forms the shell trap. We demonstrate that a pure spherical bubble, reaching the quasi-2D regime for standard atom numbers, could be formed from two crossed beams with a parabolic profile. An analytical study shows that the relevant characteristics of the trap depend on the ratio of the ground and excited state polarizabilities and the lifetime of the excited state. As a benchmark, we provide quantitative analysis of a realistic configuration for rubidium ensembles, leading to a 250 Hz transverse confinement for a 35 μm radius bubble and a trap residual scattering rate of less than 10 s−1.
In this paper, we present an all-optical method to produce shell-shaped traps for ultracold atoms in microgravity. Our scheme exploits optical double dressing of the ground state to create a short range strongly repulsive central potential barrier. Combined with a long range attractive central potential, this barrier forms the shell trap. We demonstrate that a pure spherical bubble, reaching the quasi-2D regime for standard atom numbers, could be formed from two crossed beams with a parabolic profile. An analytical study shows that the relevant characteristics of the trap depend on the ratio of the ground and excited state polarizabilities and the lifetime of the excited state. As a benchmark, we provide quantitative analysis of a realistic configuration for rubidium ensembles, leading to a 250 Hz transverse confinement for a 35 μm radius bubble and a trap residual scattering rate of less than 10 s−1.
The recent developments of microgravity experiments with ultracold atoms have produced a relevant boost in the study of shell-shaped ellipsoidal Bose-Einstein condensates. For realistic bubble-trap parameters, here we calculate the critical temperature of Bose-Einstein condensation, which, if compared to the one of the bare harmonic trap with the same frequencies, shows a strong reduction. We simulate the zero-temperature density distribution with the Gross-Pitaevskii equation, and we study the free expansion of the hollow condensate. While part of the atoms expands in the outward direction, the condensate self-interferes inside the bubble trap, filling the hole in experimentally observable times. For a mesoscopic number of particles in a strongly interacting regime, for which more refined approaches are needed, we employ quantum Monte Carlo simulations, proving that the nontrivial topology of a thin shell allows superfluidity. Our work constitutes a reliable benchmark for the forthcoming scientific investigations with bubble traps.
Ultracold quantum gases confined in three-dimensional bubble traps are promising tools for exploring many-body effects on curved manifolds. As an alternative to the conventional technique of radio-frequency dressing, we propose to create such shell-shaped Bose-Einstein condensates in microgravity based on dual-species atomic mixtures, and we analyze their properties as well as the feasibility of realizing symmetrically filled shells. Beyond similarities with the radio-frequency dressing method, as in the collective excitation spectrum, our approach has several natural advantages like the robustness of the created quantum bubbles and the possibility of magnifying shell effects through an interaction-driven expansion.
We discuss a method to create two-dimensional (2D) traps as well as atomic shell, or bubble, states for a Bose-Einstein condensate initially prepared in a conventional magnetic trap. The scheme relies on the use of time-dependent, radio-frequency-induced adiabatic potentials. These are shown to form a versatile and robust tool to generate interesting trapping potentials. Our shell states take the form of thin, highly stable matter-wave bubbles and can serve as stepping stones to prepare atoms in highly excited trap eigenstates or to study ``collapse and revival phenomena.'' Their creation requires gravitational effects to be compensated by applying additional optical dipole potentials. However, in our scheme gravitation can also be exploited to provide a route to two-dimensional atom trapping. We demonstrate the loading process for such a trap and examine experimental conditions under which a 2D condensate may be prepared.
Extending the understanding of Bose-Einstein condensate (BEC) physics to new geometries and topologies has a long and varied history in ultracold atomic physics. One such new geometry is that of a bubble, where a condensate would be confined to the surface of an ellipsoidal shell. Study of this geometry would give insight into new collective modes, self-interference effects, topology-dependent vortex behavior, dimensionality crossovers from thick to thin shells, and the properties of condensates pushed into the ultradilute limit. Here we propose to implement a realistic experimental framework for generating shell-geometry BEC using radiofrequency dressing of magnetically trapped samples. Such a tantalizing state of matter is inaccessible terrestrially due to the distorting effect of gravity on experimentally feasible shell potentials. The debut of an orbital BEC machine (NASA Cold Atom Laboratory, aboard the International Space Station) has enabled the operation of quantum-gas experiments in a regime of perpetual freefall, and thus has permitted the planning of microgravity shell-geometry BEC experiments. We discuss specific experimental configurations, applicable inhomogeneities and other experimental challenges, and outline potential experiments.
Time-varying fields are widely used to extend the accessible range of trapping potentials for ultracold atoms. This work explores two very different examples of such fields, in the radiofrequency and optical regimes, whose interactions with trapped atoms can both be described in terms of the dressed atom picture. Forming the basis of this work are radiofrequency dressed adiabatic potentials based on macroscopic trapping coils. Atoms are confined at the south pole of the resultant oblate spheroidal trapping surfaces. This work describes the extension of these potentials by two different methods: the application of multiple dressing radiofrequencies, and addition of a rapidly-scanned optical dipole trap. This is the first experimental demonstration of a multiple-radiofrequency dressed adiabatic potential, explored using ultracold 87Rb atoms confined in a highly configurable double well. Due to the independent generation of each constituent dressing frequency, the depth of each trapping well and the height of the barrier are easily manipulated, enabling precise and reliable transfer of atoms between the available trapping geometries. Experimental work includes an exploration of the potential-shaping capabilities of the three-radiofrequency system, and characterisation of the potential landscape using radiofrequency spectroscopy with good agreement to the eigenvalues numerically calculated using Floquet theory. This initial exploration of multiple-radiofrequency techniques lays the groundwork for applications in studying double well physics in a two-dimensional system, and independent state or species selective manipulation of trapped atoms. The potential shaping capabilities of this method can also be extended by applying additional trapping frequencies. In a supplementary line of experimental work, an optical dipole trapping system has been constructed, and the trapping beam aligned to the lower surface of the radiofrequency dressed trapping shell in order to sculpt the radial confinement. Beam shaping is achieved using an acousto-optic deflector, which can be used to produce either a composite array of static deflected beams, a rapidly-scanned painted potential, or some combination of the two approaches. The development and extension of the experimental apparatus required to implement these enhanced dressed state potentials is explored, and the challenges of their experimental implementation considered.
We present two spatial-shaping approaches - phase and amplitude - for creating two-dimensional optical dipole potentials for ultracold neutral atoms. When combined with an attractive or repulsive Gaussian sheet formed by an astigmatically focused beam, atoms are trapped in three dimensions resulting in planar confinement with an arbitrary network of potentials - a free-space atom chip. The first approach utilizes an adaptation of the generalized phase-contrast technique to convert a phase structure embedded in a beam after traversing a phase mask, to an identical intensity profile in the image plane. Phase masks, and a requisite phase-contrast filter, can be chemically etched into optical material (e.g., fused silica) or implemented with spatial light modulators; etching provides the highest quality while spatial light modulators enable prototyping and realtime structure modification. This approach was demonstrated on an ensemble of thermal atoms. Amplitude shaping is possible when the potential structure is made as an opaque mask in the path of a dipole trap beam, followed by imaging the shadow onto the plane of the atoms. While much more lossy, this very simple and inexpensive approach can produce dipole potentials suitable for containing degenerate gases. High-quality amplitude masks can be produced with standard photolithography techniques. Amplitude shaping was demonstrated on a Bose-Einstein condensate.