Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.03966 · Entropy

Ion-Based Characterization of Laser Beam Profiles for Quantum Information Processing

Ilyoung Jung, Frank G. Schroer, Philip Richerme

Published Oct 30, 2025• 1 citation
arXivHTMLPDF

Abstract

Laser-driven operations are a common approach for engineering one- and two-qubit gates in trapped-ion arrays. Measuring key parameters of these lasers, such as beam sizes, intensities, and polarizations, is central to predicting and optimizing gate speeds and stability. Unfortunately, it is challenging to accurately measure these properties at the ion location within an ultra-high vacuum chamber. Here, we demonstrate how the ions themselves may be used as sensors to directly characterize the laser beams needed for quantum gate operations. Making use of the four-photon Stark Shift effect in 171Yb+ ions, we measure the profiles, alignments, and polarizations of the lasers driving counter-propagating Raman transitions. We then show that optimizing the parameters of each laser individually leads to higher-speed Raman-driven gates with smaller susceptibility to errors. Our approach demonstrates the capability of trapped ions to probe their local environments and to provide useful feedback for improving system performance.

DOI
10.3390/e27111115

Related papers

Trapped ions quantum logic gate with optical tweezers and the Magnus effect

M. Mazzanti, R. Gerritsma, R. J. C. Spreeuw +1 more

We consider the implementation of quantum logic gates in trapped ions using tightly focused optical tweezers. Strong polarization gradients near the tweezer focus lead to qubit-state-dependent forces on the ion. We show that these may be used to implement quantum logic gates on pairs of ion qubits in a crystal. The qubit-state-dependent forces generated by this effect are located on the plane perpendicular to the direction of propagation of the laser beams opening alternate ways of coupling to motional modes of an ion crystal. The proposed gate does not require ground-state cooling of the ions although the waist of the tightly focused beam needs to be comparable to its wavelength in order to achieve the needed field curvature. Furthermore, the gate can be implemented on both ground-state and magnetic-field-insensitive clock-state qubits without the need for counterpropagating laser fields. This simplifies the setup and eliminates errors due to phase instabilities between the gate laser beams. Finally, we show that imperfections in the gate execution, in particular, a 30-nm tweezer alignment error, lead to an infidelity of $\ensuremath{\sim}{10}^{\ensuremath{-}3}$. In the absence of experimental imperfections and within the limits of the gate model explored in this paper the fidelity is predicted to be $\ensuremath{\sim}0.999\phantom{\rule{0.16em}{0ex}}88$ when using a Laguerre-Gaussian beam to suppress photon scattering errors.

arXiv:2301.04668•Physical Review Research•Jul 19, 2023•16 citations

Developing theoretical and experimental tools for a hybrid quantum simulator based on trapped ions

Sainath Motlakunta

Quantum simulation is the process of using a highly controllable quantum system to simulate another less controllable system. Quantum simulation can provide insights into the properties and dynamics of complex many-body systems. Trapped ion platform is one of the leading candidates for a quantum simulator due to its properties such as ease of isolation, preparation and manipulation. Simulating high dimensional spin systems enables us to study the various physical phenomena in higher geometries. Previous proposals for simulating higher dimensions require experimental resources that don't scale favourably with the system. In this thesis, we propose a hybrid (digital-analog) approach to simulate an effective 2D lattice from a 1D chain of trapped ions. In the initial geometry, the ions interact with each other through a flip-flop kind of interactions generated using a global Molmer-Sorensen scheme. A series of single qubit gates are used to rescale and suppress the interactions in the initial chain to simulate the target geometry. These gates are applied using a laser field gradient which generates a site-dependent AC stark shift. I discuss the construction of this protocol in detail and the theoretical results for the case of 6, 9 and 16 ions. I also show that the number of gates and also the Stark gradient scale linearly with the system size. \n \nExperimental implementation of an ion trap quantum simulator has various challenges, one of the which is the laser frequency stabilization within a fraction of transition linewidth. Traditionally, this is done by locking the lasers to an atomic transition. In this thesis, I discuss two alternative schemes for locking the laser frequencies used to build a 171Yb+ ion quantum simulator. One of these solutions uses a commercial wavemeter as a measuring device for the frequency and feedbacks the lasers based on this measurement. I discuss the layout of this scheme and some results. Other solution uses a Fabry Perot (FP) cavity to transfer the stability of a stable laser to an unstable laser. In this thesis, I discuss the construction, optical layout and transmission measurements of a home-built FP cavity.

•Sep 5, 2018•0 citations

Photon scattering errors during stimulated Raman transitions in trapped-ion qubits

I. D. Moore, Wesley C. Campbell, Eric R. Hudson +3 more

We study photon scattering errors in stimulated Raman driven quantum logic gates. For certain parameter regimes, we find that previous simplified models of the process significantly overestimate the gate error rate due to photon scattering. This overestimate is shown to be due to previous models neglecting the detuning dependence of the scattered photon frequency and Lamb-Dicke parameter, a second scattering process, interference effects on scattering rates to metastable manifolds, and the counterrotating contribution to the Raman transition rate. The resulting improved model shows that there is no fundamental limit on gate error due to photon scattering for electronic ground-state qubits in commonly used trapped-ion species when the Raman laser beams are red detuned from the main optical transition. Additionally, photon scattering errors are studied for qubits encoded in the metastable ${D}_{5/2}$ manifold, showing that gate errors below ${10}^{\ensuremath{-}4}$ are achievable for all commonly used trapped ions.

arXiv:2211.00744•Physical Review A•Mar 15, 2023•29 citations

Development and implementation of an Yb+ ion trap experiment towards coherent manipulation and entanglement

James J. McLoughlin

Trapped ions are currently one of the most promising architectures for realising the quantum information processor. The long lived internal states are ideal for representing qubit states and, through controlled interactions with electromagnetic radiation, ions can be manipulated to execute coherent logic operations. In this thesis an experiment capable of trapping Yb+ ions, including 171Yb+, is presented. Since ion energy can limit the coherence of qubit manipulations, characterisation of an ion trap heating rate is vital. Using a trapped 174Yb+ ion a heating rate consistent with previous measurements of other ion species in similar ion traps is obtained. This result shows abnormal heating of Yb+ does not occur, further solidifying the suitability of this species for quantum information processing. Efficient creation, and cooling of trapped ions requires exact wavelengths for the ionising, cooling and repump transitions. A simple technique to measure the 1S0 ? 1P1 transition wavelengths, required for isotope selective photoionisation of neutral Yb, is developed. Using the technique new wavelengths, accurate to 60 MHz, are obtained and differ from previously published results by 660 MHz. Through a simple modification the technique can also predict Doppler shifted transition frequencies, which may be required in non-perpendicular atom-laser interactions. Using trapped ions, the 2S1=2 ? 2P1/2 Doppler cooling and 2D3/2 ? 2D[3/2]1/2 repump transitions are also measured to a greater accuracy than previously reported. Many experiments require wavelengths which can only be obtained using complex expensive laser systems. To remedy this a simple cost effective laser is developed to enable laser diodes to be operated at sub zero temperatures, extending the range of obtainable wavelengths. Additional diode modulation capabilities allow for the manipulation of atoms and ions with hyperfine structures. The laser is shown to be suitable for manipulating Yb+ ions by cooling a diode from 372 nm to 369 nm and simultaneously generating 2.1 GHz frequency sidebands. Coherent manipulation such as arbitrary qubit rotations, motional coupling and ground state cooling, are required for trapped ion quantum computing. Two photon stimulated Raman transitions are identified as a suitable technique to implement all of these requirements and an investigation into implementing this technique with 171Yb+ is conducted. The possibility of exciting a Raman transition via either a dipole or quadrupole transitions in 171Yb+ is analysed, with dipole transitions preferred because quadrupole transitions are found to be too demanding experimentally. An inexpensive setup, utilising a dipole transition, is designed and tested. Although currently limited the setup shows potential to be an inexpensive, high fidelity method of exciting a Raman transition.

•Apr 20, 2012•1 citation

High-performance gates on trapped ion qubits using counterpropagating pulse-shaped laser beams

Evangelos Piliouras, Hisham Amer, Susan M. Clark +9 more

Highly-localized light-matter interactions are necessary for scaling trapped-ion architectures. In hyperfine qubits, counterpropagating beams generate entangling gates by coupling with motion, but this effect is undesirable during single-qubit operations. For that reason, single-qubit gates are traditionally implemented with copropagating beams, and the coexistence of two beam geometries adds hardware and computational overhead. In an effort towards collective performance improvement with minimal overhead, we design and implement pulse-amplitude and dephasing robust dynamically corrected gates using Space Curve Quantum Control (SCQC) and compare them against the constant-amplitude gate implementation. We perform gate set tomography on a four-qubit trapped-ion register, and we discover more than 50% error reduction when robust pulses are used. We find that counterpropagating robust gates often outperform their copropagating counterparts and reach error rates as low as $(3.59 \pm 1.25)\cdot 10^{-3}$, using diamond distance as a metric. This value establishes a laser-driven-gate error reference and is merely an order of magnitude higher than the best reported $\textit{microwave}$ gate on a $\textit{single}$ ion. Additional experiments reveal that robust pulses can effectively suppress non-Markovian errors that grow during runtime. Our work challenges the widely accepted belief that copropagating gates should be preferred for their weak motional coupling and invites the adoption of high-performance robust pulses that suppress multiple noise sources of the trapped-ion error budget.

quant-pharXiv:2606.15672•Jun 16, 2026•1 citation

Transport quantum logic gates for trapped ions

Dietrich G. Leibfried, E. Knill, C. Ospelkaus +1 more

Many efforts are currently underway to build a device capable of large scale quantum information processing (QIP). Whereas QIP has been demonstrated for a few qubits in several systems, many technical difficulties must be overcome in order to construct a large-scale device. In one proposal for large-scale QIP, trapped ions are manipulated by precisely controlled light pulses and moved through and stored in multizone trap arrays. The technical overhead necessary to precisely control both the ion geometrical configurations and the laser interactions is demanding. Here we propose methods that significantly reduce the overhead on laser-beam control for performing single- and multiple-qubit operations on trapped ions. We show how a universal set of operations can be implemented by controlled transport of ions through stationary laser beams. At the same time, each laser beam can be used to perform many operations in parallel, potentially reducing the total laser power necessary to carry out QIP tasks. The overall setup necessary for implementing transport gates is simpler than for gates executed on stationary ions. We also suggest a transport-based two-qubit gate scheme utilizing microfabricated permanent magnets that can be executed without laser light.

arXiv:0707.3646•Physical Review A•Sep 21, 2007•53 citations
Laser-driven operations are a common approach for engineering one- and two-qubit gates in trapped-ion arrays. Measuring key parameters of these lasers, such as beam sizes, intensities, and polarizations, is central to predicting and optimizing gate speeds and stability. Unfortunately, it is challenging to accurately measure these properties at the ion location within an ultra-high vacuum chamber. Here, we demonstrate how the ions themselves may be used as sensors to directly characterize the laser beams needed for quantum gate operations. Making use of the four-photon Stark Shift effect in 171Yb+ ions, we measure the profiles, alignments, and polarizations of the lasers driving counter-propagating Raman transitions. We then show that optimizing the parameters of each laser individually leads to higher-speed Raman-driven gates with smaller susceptibility to errors. Our approach demonstrates the capability of trapped ions to probe their local environments and to provide useful feedback for improving system performance.
We consider the implementation of quantum logic gates in trapped ions using tightly focused optical tweezers. Strong polarization gradients near the tweezer focus lead to qubit-state-dependent forces on the ion. We show that these may be used to implement quantum logic gates on pairs of ion qubits in a crystal. The qubit-state-dependent forces generated by this effect are located on the plane perpendicular to the direction of propagation of the laser beams opening alternate ways of coupling to motional modes of an ion crystal. The proposed gate does not require ground-state cooling of the ions although the waist of the tightly focused beam needs to be comparable to its wavelength in order to achieve the needed field curvature. Furthermore, the gate can be implemented on both ground-state and magnetic-field-insensitive clock-state qubits without the need for counterpropagating laser fields. This simplifies the setup and eliminates errors due to phase instabilities between the gate laser beams. Finally, we show that imperfections in the gate execution, in particular, a 30-nm tweezer alignment error, lead to an infidelity of $\ensuremath{\sim}{10}^{\ensuremath{-}3}$. In the absence of experimental imperfections and within the limits of the gate model explored in this paper the fidelity is predicted to be $\ensuremath{\sim}0.999\phantom{\rule{0.16em}{0ex}}88$ when using a Laguerre-Gaussian beam to suppress photon scattering errors.
Quantum simulation is the process of using a highly controllable quantum system to simulate another less controllable system. Quantum simulation can provide insights into the properties and dynamics of complex many-body systems. Trapped ion platform is one of the leading candidates for a quantum simulator due to its properties such as ease of isolation, preparation and manipulation. Simulating high dimensional spin systems enables us to study the various physical phenomena in higher geometries. Previous proposals for simulating higher dimensions require experimental resources that don't scale favourably with the system. In this thesis, we propose a hybrid (digital-analog) approach to simulate an effective 2D lattice from a 1D chain of trapped ions. In the initial geometry, the ions interact with each other through a flip-flop kind of interactions generated using a global Molmer-Sorensen scheme. A series of single qubit gates are used to rescale and suppress the interactions in the initial chain to simulate the target geometry. These gates are applied using a laser field gradient which generates a site-dependent AC stark shift. I discuss the construction of this protocol in detail and the theoretical results for the case of 6, 9 and 16 ions. I also show that the number of gates and also the Stark gradient scale linearly with the system size. \n \nExperimental implementation of an ion trap quantum simulator has various challenges, one of the which is the laser frequency stabilization within a fraction of transition linewidth. Traditionally, this is done by locking the lasers to an atomic transition. In this thesis, I discuss two alternative schemes for locking the laser frequencies used to build a 171Yb+ ion quantum simulator. One of these solutions uses a commercial wavemeter as a measuring device for the frequency and feedbacks the lasers based on this measurement. I discuss the layout of this scheme and some results. Other solution uses a Fabry Perot (FP) cavity to transfer the stability of a stable laser to an unstable laser. In this thesis, I discuss the construction, optical layout and transmission measurements of a home-built FP cavity.
We study photon scattering errors in stimulated Raman driven quantum logic gates. For certain parameter regimes, we find that previous simplified models of the process significantly overestimate the gate error rate due to photon scattering. This overestimate is shown to be due to previous models neglecting the detuning dependence of the scattered photon frequency and Lamb-Dicke parameter, a second scattering process, interference effects on scattering rates to metastable manifolds, and the counterrotating contribution to the Raman transition rate. The resulting improved model shows that there is no fundamental limit on gate error due to photon scattering for electronic ground-state qubits in commonly used trapped-ion species when the Raman laser beams are red detuned from the main optical transition. Additionally, photon scattering errors are studied for qubits encoded in the metastable D5/2{D}_{5/2}D5/2​ manifold, showing that gate errors below ${10}^{\ensuremath{-}4}$ are achievable for all commonly used trapped ions.
Trapped ions are currently one of the most promising architectures for realising the quantum information processor. The long lived internal states are ideal for representing qubit states and, through controlled interactions with electromagnetic radiation, ions can be manipulated to execute coherent logic operations. In this thesis an experiment capable of trapping Yb+ ions, including 171Yb+, is presented. Since ion energy can limit the coherence of qubit manipulations, characterisation of an ion trap heating rate is vital. Using a trapped 174Yb+ ion a heating rate consistent with previous measurements of other ion species in similar ion traps is obtained. This result shows abnormal heating of Yb+ does not occur, further solidifying the suitability of this species for quantum information processing. Efficient creation, and cooling of trapped ions requires exact wavelengths for the ionising, cooling and repump transitions. A simple technique to measure the 1S0 ? 1P1 transition wavelengths, required for isotope selective photoionisation of neutral Yb, is developed. Using the technique new wavelengths, accurate to 60 MHz, are obtained and differ from previously published results by 660 MHz. Through a simple modification the technique can also predict Doppler shifted transition frequencies, which may be required in non-perpendicular atom-laser interactions. Using trapped ions, the 2S1=2 ? 2P1/2 Doppler cooling and 2D3/2 ? 2D[3/2]1/2 repump transitions are also measured to a greater accuracy than previously reported. Many experiments require wavelengths which can only be obtained using complex expensive laser systems. To remedy this a simple cost effective laser is developed to enable laser diodes to be operated at sub zero temperatures, extending the range of obtainable wavelengths. Additional diode modulation capabilities allow for the manipulation of atoms and ions with hyperfine structures. The laser is shown to be suitable for manipulating Yb+ ions by cooling a diode from 372 nm to 369 nm and simultaneously generating 2.1 GHz frequency sidebands. Coherent manipulation such as arbitrary qubit rotations, motional coupling and ground state cooling, are required for trapped ion quantum computing. Two photon stimulated Raman transitions are identified as a suitable technique to implement all of these requirements and an investigation into implementing this technique with 171Yb+ is conducted. The possibility of exciting a Raman transition via either a dipole or quadrupole transitions in 171Yb+ is analysed, with dipole transitions preferred because quadrupole transitions are found to be too demanding experimentally. An inexpensive setup, utilising a dipole transition, is designed and tested. Although currently limited the setup shows potential to be an inexpensive, high fidelity method of exciting a Raman transition.
Highly-localized light-matter interactions are necessary for scaling trapped-ion architectures. In hyperfine qubits, counterpropagating beams generate entangling gates by coupling with motion, but this effect is undesirable during single-qubit operations. For that reason, single-qubit gates are traditionally implemented with copropagating beams, and the coexistence of two beam geometries adds hardware and computational overhead. In an effort towards collective performance improvement with minimal overhead, we design and implement pulse-amplitude and dephasing robust dynamically corrected gates using Space Curve Quantum Control (SCQC) and compare them against the constant-amplitude gate implementation. We perform gate set tomography on a four-qubit trapped-ion register, and we discover more than 50% error reduction when robust pulses are used. We find that counterpropagating robust gates often outperform their copropagating counterparts and reach error rates as low as (3.59±1.25)⋅10−3(3.59 \pm 1.25)\cdot 10^{-3}(3.59±1.25)⋅10−3, using diamond distance as a metric. This value establishes a laser-driven-gate error reference and is merely an order of magnitude higher than the best reported microwave\textit{microwave}microwave gate on a single\textit{single}single ion. Additional experiments reveal that robust pulses can effectively suppress non-Markovian errors that grow during runtime. Our work challenges the widely accepted belief that copropagating gates should be preferred for their weak motional coupling and invites the adoption of high-performance robust pulses that suppress multiple noise sources of the trapped-ion error budget.
Many efforts are currently underway to build a device capable of large scale quantum information processing (QIP). Whereas QIP has been demonstrated for a few qubits in several systems, many technical difficulties must be overcome in order to construct a large-scale device. In one proposal for large-scale QIP, trapped ions are manipulated by precisely controlled light pulses and moved through and stored in multizone trap arrays. The technical overhead necessary to precisely control both the ion geometrical configurations and the laser interactions is demanding. Here we propose methods that significantly reduce the overhead on laser-beam control for performing single- and multiple-qubit operations on trapped ions. We show how a universal set of operations can be implemented by controlled transport of ions through stationary laser beams. At the same time, each laser beam can be used to perform many operations in parallel, potentially reducing the total laser power necessary to carry out QIP tasks. The overall setup necessary for implementing transport gates is simpler than for gates executed on stationary ions. We also suggest a transport-based two-qubit gate scheme utilizing microfabricated permanent magnets that can be executed without laser light.