Abstract We apply polymer quantization, a quantization technique sometimes used in high energy physics, to several superconducting circuits including: transmons, transmission line resonators, and LC circuits. In the case of transmon qubits and transmission line resonators, experimental predictions are very close to what is found with canonical quantization, though in this approach constant charge offsets can be interpreted as quantization ambiguities. In the case of LC circuits, polymer quantization predicts nonlinearities which are not present in the canonical approach. Based on this analysis we design and analyze a qubit which uses a meander inductor instead of a Josephson junction. Implications for qubit performance and fabrication are discussed. Given a choice for an effective phase operator, relevant parameters such as anharmonicity, frequency, and dispersive shifts are calculated for this meander inductor based qubit.
Abstract We apply polymer quantization, a quantization technique sometimes used in high energy physics, to several superconducting circuits including: transmons, transmission line resonators, and LC circuits. In the case of transmon qubits and transmission line resonators, experimental predictions are very close to what is found with canonical quantization, though in this approach constant charge offsets can be interpreted as quantization ambiguities. In the case of LC circuits, polymer quantization predicts nonlinearities which are not present in the canonical approach. Based on this analysis we design and analyze a qubit which uses a meander inductor instead of a Josephson junction. Implications for qubit performance and fabrication are discussed. Given a choice for an effective phase operator, relevant parameters such as anharmonicity, frequency, and dispersive shifts are calculated for this meander inductor based qubit.
The quantization of superconducting transmission-line resonators is usually introduced phenomenologically by modeling the resonator as an effective LC circuit and imposing canonical commutation relations on macroscopic variables such as charge and flux. Although this approach is highly successful, it leaves open why these macroscopic variables should obey quantum commutation relations and how this behavior emerges from the superconducting state. In this work, starting from the microscopic pairing Hamiltonian underlying BCS superconductivity, we derive the low-energy effective Hamiltonian of a circuit-QED architecture containing a superconducting transmission line with distributed capacitive and inductive elements. We establish quantitative relations between macroscopic observables, including current and voltage, and the spatially local superconducting phase, as well as the microscopic parameters of the electron-phonon system. We then extend the third quantization of the superconducting order parameter, introduced in Paper (I) for the global phase, to the spatially local case. This gives a macroscopic field quantization of the superconducting phase. We show that, after restriction to the low-energy excitation subspace, the local superconducting phase becomes a genuine quantum dynamical variable. Thus, the quantum behavior of transmission-line resonators need not be postulated at the macroscopic level, but follows from the third quantization of the superconducting order parameter. These results suggest that capacitive and inductive superconducting circuit elements share the same microscopic origin, providing a unified framework for superconducting circuit quantization.
In the quest to produce quantum technology, superconducting networks, working at temperatures just above absolute zero, have arisen as one of the most promising physical implementations. The precise analysis and synthesis of such circuits have required merging the fields of physics, engineering, and mathematics. In this dissertation, we develop mathematically consistent and precise Hamiltonian models to describe ideal superconducting networks made of an arbitrary number of lumped elements, such as capacitors, inductors, Josephson and phase-slip junctions, gyrators, etc., and distributed ones like transmission lines. We give formal proofs for the decoupling at high and low frequencies of lumped degrees of freedom from infinite-dimensional systems in different coupling configurations in models based on the effective Kirchhoff's laws. We extend the standard theory to quantize circuits that include ideal nonreciprocal elements all the way to their Hamiltonian descriptions in a systematic way. Finally, we pave the way on how to quantize general frequency-dependent gyrators and circulators coupled to both transmission lines and other lumped-element networks. We have explicitly shown, that these models, albeit ideal, are finite and present no divergence issues. We explain and dispel misunderstandings from the previous literature. Furthermore, we have demonstrated the usefulness of a redundant basis for performing separation of variables of the transmission line (1D) fields in the presence of point-like (lumped-element) couplings by time-reversal symmetry-breaking terms, i.e. nonreciprocal elements.
This paper presents a computational analysis of a superconducting transmon qubit design, in which the superconductor-insulator-superconductor (SIS) Josephson junction is replaced by a coplanar, superconductor-constriction-superconductor (ScS) nanobridge junction. Within the scope of Ginzburg-Landau theory, we find that the nanobridge ScS transmon has an improved charge dispersion compared to the SIS transmon, with a tradeoff of smaller anharmonicity. These calculations provide a framework for estimating the superconductor material properties and junction dimensions compatible with gigahertz frequency ScS transmon operation.
Appendix K: this appendix is an introduction to another very active and promising domain of quantum physics, named circuit quantum electrodynamics (cQED), dealing with the quantum properties of macroscopic objects consisting of superconducting electrical circuits. In an LC circuit the energy is quantized, and charge and flux are two quantum canonical conjugate quantities that do not commute. Their quantum fluctuations are bound by a Heisenberg inequality. A Josephson junction inserted in the circuit introduces strong nonlinearities in the system, which breaks the equidistance between the energy levels and makes the circuit look like a qubit, called a transmon. Cooling at mK temperatures is necessary to have quantum effects dominate over thermal effects. The circuit is embedded in a resonant cavity, and the system bears many analogies with cavity QED and Jaynes–Cummings formalism for coupled photons and atoms. One can perform nondestructive read-out and control of the transmon, as well as phase-sensitive, quantum-limited amplification, with nonlinearities that are much stronger than the ones used in quantum optics.
In the last two decades, a spectacular development in the superconducting qubits has been accomplished experimentally as well as theoretically. The main reason for that is the realization that superconducting qubits can play a crucial role in the emergent field of quantum information processing and quantum computing. The interaction of superconducting qubits with the quantized electromagnetic field leads to make the circuit quantum electrodynamics, inspired by cavity quantum electrodynamics. The field of superconducting qubits and circuit QED is fast growing and branching to diverse applications in multidisciplinary fields. This makes it harder for first-time readers to follow-up. Therefore, this article is targeting to introduce in an intuitive way the topic of superconducting qubit and circuit QED by giving all the mathematical background, Lagrangian formalism for electric circuits, interaction Hamiltonian, and contextual physical interpretation essential to anew scientists and engineers planning to be specialized in this field as well as portraying a wide vantage for higher studies through the suggested recommendation resulted from the simulated examples and written code based on Python packages and Qiskit software. In this article, the superconducting qubits, transmon and fluxonium, are reviewed after introducing the abstract definition of a quantum bit. Moreover, light-matter interaction in fluxonium qubit and quantization of transmission line resonator are discussed briefly. Some of the simulated systems such as the energy levels of fluxonium as a function of offset flux are presented. Finally, applications of superconducting qubits in quantum computing and other fields such as quantum transistors, quantum machines and metamaterials are discussed. Index Terms Superconducting qubits, circuit QED, quantum logic gate, fluxonium, transmon.
Abstract Quantum computing has been developed for many physical systems, and superconducting qubits are now in the integration phase. To efficiently design a many qubit system, an appropriate circuit simulator is necessary. Despite the existence of simulators for circuits including Josephson junctions, simpler circuit simulators are desirable when considering integrated qubits controlled by millions of transistors. This study examines the application of conventional Simulation Program with Integrated Circuit Emphasis simulators to analyze transmission signals of the system composed of transmons in the dispersive regime. Further, the influences of device parameter variations caused by the fabrication process can be taken into the model.