Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2508.20252

Classical Simulations of Low Magic Quantum Dynamics

Kemal Aziz, Haining Pan, Michael J. Gullans, J. H. Pixley

Published Aug 27, 2025• 9 citations
arXivHTMLPDF

Abstract

We develop classical simulation algorithms for adaptive quantum circuits that produce states with low levels of ``magic'' (i.e., non-stabilizerness). These algorithms are particularly well-suited to circuits with high rates of Pauli measurements, such as those encountered in quantum error correction and monitored quantum circuits. The measurements serve to limit the buildup of magic induced by non-Clifford operations arising from generic noise processes or unitary gates, respectively. Our algorithms also allow a systematic truncation procedure to achieve approximate simulation. To benchmark our approach, we study the dynamics of all-to-all monitored quantum circuits with a sub-extensive rate of T-gates per unit of circuit depth, where we can simulate previously inaccessible system sizes and depths. We characterize measurement-induced phase transitions in the output wavefunction, including in the entanglement, purification, and magic. We outline the utility of our algorithms to simulate dynamics with low magic and high entanglement, complementary to the leading matrix-product state approaches.

DOI
10.48550/arxiv.2508.20252

Related papers

Dynamical Magic Transitions in Monitored Clifford+ T Circuits

Mircea Bejan, Campbell McLauchlan, Benjámin Béri

The classical simulation of highly entangling quantum dynamics is conjectured to be generically hard. Thus, recently discovered measurement-induced transitions between highly entangling and low-entanglement dynamics are phase transitions in classical simulability. Here, we study simulability transitions beyond entanglement: noting that some highly entangling dynamics (e.g., integrable systems or Clifford circuits) are easy to classically simulate, thus requiring “magic”—a subtle form of quantum resource—to achieve computational hardness, we ask how the dynamics of magic competes with measurements. We study the resulting “dynamical magic transitions” focusing on random monitored Clifford circuits doped by T gates (injecting magic). We identify dynamical “stabilizer purification”—the collapse of a superposition of stabilizer states by measurements—as the mechanism driving this transition. We find cases where transitions in magic and entanglement coincide, but also others with a magic and simulability transition in a highly (volume-law) entangled phase. In establishing our results, we use Pauli-based computation, a scheme distilling the quantum essence of the dynamics to a magic state register subject to mutually commuting measurements. We link stabilizer purification to “magic fragmentation” wherein these measurements separate into disjoint, O ( 1 ) -weight blocks, and relate this to the spread of magic in the original circuit becoming arrested. Published by the American Physical Society 2024

arXiv:2312.00132•PRX Quantum•Aug 13, 2024•83 citations

Exact efficient simulation of noisy logical magic states using Clifford stabilizers

Yugo Takada, Stephen D. Bartlett, Dominic J. Williamson

The preparation of high-fidelity logical magic states is a crucial subroutine for universal fault-tolerant quantum computation (FTQC). Predicting the performance of FTQC and developing improved protocols rely on numerical methods to classically simulate logical magic state preparation in the presence of noise. Clifford logic on Pauli-stabilizer codes with circuit-level Pauli errors can be efficiently simulated using Pauli-stabilizer formalism, but the non-Clifford operations required to prepare logical magic states render generic simulation inefficient. We introduce Clifford-stabilizer simulation, an exact and efficient algorithm based on updating a Clifford-stabilizer group to simulate noisy preparation protocols for a broad class of logical magic states used to implement non-Clifford gates in the third level of the Clifford hierarchy under circuit-level Pauli errors. Clifford-stabilizer simulation applies to a range of operations that commonly appear in preparation protocols for such logical magic states, including Pauli-stabilizer measurements, logical Clifford measurements, and transversal non-Clifford gates. Our algorithm for Clifford-stabilizer simulation maps a non-Clifford circuit with sampled circuit-level Pauli errors to a Clifford circuit that exactly reproduces its measurement outcome distribution, achieving time and space complexities polynomial in relevant protocol parameters. We perform exact simulation of magic state cultivation up to fault distance 7 by Clifford-stabilizer simulation. Our method provides a route to perform exact benchmarking of large-scale logical magic state preparation protocols required for useful FTQC.

quant-pharXiv:2609.16929•Sep 16, 2026•10 citations

Magic transition in measurement-only circuits

Poetri Sonya Tarabunga, Emanuele Tirrito

Magic, or nonstabilizerness, quantifies the distance of a quantum state from stabilizer states and serves as a resource for quantum computational advantage. Here, we investigate magic transitions in measurement-only quantum circuits comprising competing Clifford and non-Clifford measurements. Remarkably, this circuit can be mapped onto a classical model, enabling efficient large-scale numerical simulations and exact characterization of magic using measures that are additive for tensor products of single-qubit states. We identify a magic transition between two phases exhibiting extensive magic, separated by a critical point where mutual magic displays scaling analogous to entanglement entropy. Additionally, these distinct phases can be distinguished by topological magic. In contrast, with a vanishing rate of non-Clifford measurements, the system exhibits saturation of magic. Our results clarify the nature of magic and its linear combinations in quantum circuits utilizing genuine magic measures, thereby advancing our understanding of quantum complexity in monitored quantum systems.

arXiv:2407.15939•npj Quantum Information•Oct 21, 2025•34 citations

Classical Simulability of Quantum Circuits with Shallow Magic Depth

Y. Zhang, Yuxuan Zhang

Quantum magic is a necessary resource for quantum computers to be not efficiently simulable by classical computers. Previous results have linked the of quantum magic, characterized by the number of T gates or the stabilizer rank, to classical simulability. However, the effect of the of quantum magic on the hardness of simulating a quantum circuit remains open. In this work, we investigate the classical simulability of quantum circuits with alternating Clifford and T layers across three tasks: amplitude estimation, sampling, and evaluating Pauli observables. In the case in which all T gates are distributed in a single layer, performing amplitude estimation and sampling to multiplicative error are already classically intractable under reasonable assumptions, but Pauli observables are easy to evaluate. Surprisingly, with the addition of just one T -gate layer or merely replacing all T gates with T 1 / 2 , the Pauli evaluation task reveals a sharp complexity transition from being in P to being GapP-complete. Nevertheless, when the precision requirement is relaxed to 1 / poly ( n ) additive error, we are able to give a polynomial-time classical algorithm to compute amplitudes, Pauli observables, and sampling from log  ( n ) -sized marginal distributions for any magic-depth-1 circuit that is decomposable into a product of diagonal gates. This rules out certain forms of quantum advantage in these circuits. Our research provides new techniques to simulate highly magical circuits while shedding light on their complexity and their significant dependence on the magic depth.

arXiv:2409.13809•PRX Quantum•Feb 28, 2025•16 citations

Classical simulation of a quantum circuit with noisy magic inputs

Jiwon Heo, Sojeong Park, Changhun Oh

Magic states are essential for universal quantum computation and are widely viewed as a key source of quantum advantage, yet in realistic devices they are inevitably noisy. In this work, we characterize how noise on injected magic resources changes the classical simulability of quantum circuits and when it induces a transition from classically intractable behavior to efficient classical simulation. We adopt a resource-centric noise model in which only the injected magic components are noisy, while the baseline states, operations, and measurements belong to an efficiently simulable family. Within this setting, we develop an approximate classical sampling algorithm with controlled error and prove explicit noise-dependent conditions under which the algorithm runs in polynomial time. Our framework applies to both qubit circuits with Clifford baselines and fermionic circuits with matchgate baselines, covering representative noise channels such as dephasing and particle loss. We complement the analysis with numerical estimates of the simulation cost, providing concrete thresholds and runtime scaling across practically relevant parameter regimes.

quant-pharXiv:2601.10111•Jan 16, 2026•2 citations

Magic in quantum trajectory unravelings of noisy random quantum circuits

Sara Santos, Alessio Paviglianiti, Vincenzo Savona

The quantum-trajectory description of a noisy quantum circuit is not unique: every Kraus representation of the noise channel defines a different unraveling, i.e., a different ensemble of pure states that averages to the same density matrix. While all unravelings share the same expectation values of observables, they generally differ in the amount of quantum resources carried by the individual trajectories. Here we study non-stabilizerness, or magic, quantified by the stabilizer Rényi entropy, in quantum-trajectory unravelings of Haar-random and $T$-doped random Clifford brickwork circuits subject to local dephasing noise of strength $p$. The canonical unraveling in terms of Pauli jumps is Clifford and leaves magic untouched, so that trajectories retain the Haar-random value of non-stabilizerness. Exploring the full two-parameter family of minimal unravelings, we find that the trajectory-averaged magic can be substantially reduced by a state-independent choice of Kraus operators, and that the optimal choice is not in general the projective-measurement unraveling, but a two-outcome generalized measurement in which the Kraus operators correspond to a weak measurement of the noisy qubit. The optimal unraveling reduces the extensive magic density of the trajectories by a $p$-dependent factor without altering its linear scaling with system size. At the same time, it produces a very broad distribution of magic over trajectories, with a sizable fraction of trajectories retaining Haar-random magic. Since the cost of stabilizer-based classical simulation grows exponentially with the magic of the state, these high-magic trajectories, rather than the average, control the simulation cost. Our results delineate the potential and the limitations of unraveling optimization as a route to the classical simulation of noisy quantum dynamics with stabilizer methods.

quant-pharXiv:2610.22318•Oct 16, 2026•1 citation
We develop classical simulation algorithms for adaptive quantum circuits that produce states with low levels of ``magic'' (i.e., non-stabilizerness). These algorithms are particularly well-suited to circuits with high rates of Pauli measurements, such as those encountered in quantum error correction and monitored quantum circuits. The measurements serve to limit the buildup of magic induced by non-Clifford operations arising from generic noise processes or unitary gates, respectively. Our algorithms also allow a systematic truncation procedure to achieve approximate simulation. To benchmark our approach, we study the dynamics of all-to-all monitored quantum circuits with a sub-extensive rate of T-gates per unit of circuit depth, where we can simulate previously inaccessible system sizes and depths. We characterize measurement-induced phase transitions in the output wavefunction, including in the entanglement, purification, and magic. We outline the utility of our algorithms to simulate dynamics with low magic and high entanglement, complementary to the leading matrix-product state approaches.
The classical simulation of highly entangling quantum dynamics is conjectured to be generically hard. Thus, recently discovered measurement-induced transitions between highly entangling and low-entanglement dynamics are phase transitions in classical simulability. Here, we study simulability transitions beyond entanglement: noting that some highly entangling dynamics (e.g., integrable systems or Clifford circuits) are easy to classically simulate, thus requiring “magic”—a subtle form of quantum resource—to achieve computational hardness, we ask how the dynamics of magic competes with measurements. We study the resulting “dynamical magic transitions” focusing on random monitored Clifford circuits doped by T gates (injecting magic). We identify dynamical “stabilizer purification”—the collapse of a superposition of stabilizer states by measurements—as the mechanism driving this transition. We find cases where transitions in magic and entanglement coincide, but also others with a magic and simulability transition in a highly (volume-law) entangled phase. In establishing our results, we use Pauli-based computation, a scheme distilling the quantum essence of the dynamics to a magic state register subject to mutually commuting measurements. We link stabilizer purification to “magic fragmentation” wherein these measurements separate into disjoint, O ( 1 ) -weight blocks, and relate this to the spread of magic in the original circuit becoming arrested. Published by the American Physical Society 2024
The preparation of high-fidelity logical magic states is a crucial subroutine for universal fault-tolerant quantum computation (FTQC). Predicting the performance of FTQC and developing improved protocols rely on numerical methods to classically simulate logical magic state preparation in the presence of noise. Clifford logic on Pauli-stabilizer codes with circuit-level Pauli errors can be efficiently simulated using Pauli-stabilizer formalism, but the non-Clifford operations required to prepare logical magic states render generic simulation inefficient. We introduce Clifford-stabilizer simulation, an exact and efficient algorithm based on updating a Clifford-stabilizer group to simulate noisy preparation protocols for a broad class of logical magic states used to implement non-Clifford gates in the third level of the Clifford hierarchy under circuit-level Pauli errors. Clifford-stabilizer simulation applies to a range of operations that commonly appear in preparation protocols for such logical magic states, including Pauli-stabilizer measurements, logical Clifford measurements, and transversal non-Clifford gates. Our algorithm for Clifford-stabilizer simulation maps a non-Clifford circuit with sampled circuit-level Pauli errors to a Clifford circuit that exactly reproduces its measurement outcome distribution, achieving time and space complexities polynomial in relevant protocol parameters. We perform exact simulation of magic state cultivation up to fault distance 7 by Clifford-stabilizer simulation. Our method provides a route to perform exact benchmarking of large-scale logical magic state preparation protocols required for useful FTQC.
Magic, or nonstabilizerness, quantifies the distance of a quantum state from stabilizer states and serves as a resource for quantum computational advantage. Here, we investigate magic transitions in measurement-only quantum circuits comprising competing Clifford and non-Clifford measurements. Remarkably, this circuit can be mapped onto a classical model, enabling efficient large-scale numerical simulations and exact characterization of magic using measures that are additive for tensor products of single-qubit states. We identify a magic transition between two phases exhibiting extensive magic, separated by a critical point where mutual magic displays scaling analogous to entanglement entropy. Additionally, these distinct phases can be distinguished by topological magic. In contrast, with a vanishing rate of non-Clifford measurements, the system exhibits saturation of magic. Our results clarify the nature of magic and its linear combinations in quantum circuits utilizing genuine magic measures, thereby advancing our understanding of quantum complexity in monitored quantum systems.
Quantum magic is a necessary resource for quantum computers to be not efficiently simulable by classical computers. Previous results have linked the of quantum magic, characterized by the number of T gates or the stabilizer rank, to classical simulability. However, the effect of the of quantum magic on the hardness of simulating a quantum circuit remains open. In this work, we investigate the classical simulability of quantum circuits with alternating Clifford and T layers across three tasks: amplitude estimation, sampling, and evaluating Pauli observables. In the case in which all T gates are distributed in a single layer, performing amplitude estimation and sampling to multiplicative error are already classically intractable under reasonable assumptions, but Pauli observables are easy to evaluate. Surprisingly, with the addition of just one T -gate layer or merely replacing all T gates with T 1 / 2 , the Pauli evaluation task reveals a sharp complexity transition from being in P to being GapP-complete. Nevertheless, when the precision requirement is relaxed to 1 / poly ( n ) additive error, we are able to give a polynomial-time classical algorithm to compute amplitudes, Pauli observables, and sampling from log  ( n ) -sized marginal distributions for any magic-depth-1 circuit that is decomposable into a product of diagonal gates. This rules out certain forms of quantum advantage in these circuits. Our research provides new techniques to simulate highly magical circuits while shedding light on their complexity and their significant dependence on the magic depth.
Magic states are essential for universal quantum computation and are widely viewed as a key source of quantum advantage, yet in realistic devices they are inevitably noisy. In this work, we characterize how noise on injected magic resources changes the classical simulability of quantum circuits and when it induces a transition from classically intractable behavior to efficient classical simulation. We adopt a resource-centric noise model in which only the injected magic components are noisy, while the baseline states, operations, and measurements belong to an efficiently simulable family. Within this setting, we develop an approximate classical sampling algorithm with controlled error and prove explicit noise-dependent conditions under which the algorithm runs in polynomial time. Our framework applies to both qubit circuits with Clifford baselines and fermionic circuits with matchgate baselines, covering representative noise channels such as dephasing and particle loss. We complement the analysis with numerical estimates of the simulation cost, providing concrete thresholds and runtime scaling across practically relevant parameter regimes.
The quantum-trajectory description of a noisy quantum circuit is not unique: every Kraus representation of the noise channel defines a different unraveling, i.e., a different ensemble of pure states that averages to the same density matrix. While all unravelings share the same expectation values of observables, they generally differ in the amount of quantum resources carried by the individual trajectories. Here we study non-stabilizerness, or magic, quantified by the stabilizer Rényi entropy, in quantum-trajectory unravelings of Haar-random and TTT-doped random Clifford brickwork circuits subject to local dephasing noise of strength ppp. The canonical unraveling in terms of Pauli jumps is Clifford and leaves magic untouched, so that trajectories retain the Haar-random value of non-stabilizerness. Exploring the full two-parameter family of minimal unravelings, we find that the trajectory-averaged magic can be substantially reduced by a state-independent choice of Kraus operators, and that the optimal choice is not in general the projective-measurement unraveling, but a two-outcome generalized measurement in which the Kraus operators correspond to a weak measurement of the noisy qubit. The optimal unraveling reduces the extensive magic density of the trajectories by a ppp-dependent factor without altering its linear scaling with system size. At the same time, it produces a very broad distribution of magic over trajectories, with a sizable fraction of trajectories retaining Haar-random magic. Since the cost of stabilizer-based classical simulation grows exponentially with the magic of the state, these high-magic trajectories, rather than the average, control the simulation cost. Our results delineate the potential and the limitations of unraveling optimization as a route to the classical simulation of noisy quantum dynamics with stabilizer methods.