Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.12995 · Physical Review A

Trap-to-trap free falls with an optically levitated nanoparticle

M. Luisa Mattana, N. Carlon Zambon, Massimiliano Rossi, Eric Bonvin, Louisiane Devaud, Martin Frimmer, Lukáš Novotný

Published Dec 24, 2025• 11 citations
arXivHTMLPDF

Abstract

We perform free-fall experiments with a charge-neutral, optically levitated nanoparticle. This is achieved using an optical tweezer that can be rapidly toggled on and off and vertically displaced, enabling the particle to be released and recaptured after each free fall. The particle is insensitive to electric fields due to its charge neutrality, and during free evolution, is not subject to photon recoil heating. We achieve free-fall durations of up to 0.25ms and observe a nearly 200-fold increase in the particle's position uncertainty at recapture. The current limit on the free-fall time arises from the performance of the initial cooling step. By implementing linear feedback techniques and reducing the background pressure, we expect to perform millisecond-scale free-fall experiments in an ultrahigh vacuum, opening new opportunities for generating large delocalizations of levitated objects.

DOI
10.1103/47pz-74fc

Related papers

Free expansion of a charged nanoparticle via electrostatic compensation

David Steiner, Yaakov Y. Fein, Gregor Meier +5 more

Coherent wavepacket expansion is a key component of recent proposals aiming to create non-classical states of a levitated dielectric nanoparticle. Free evolution, i.e., releasing the particle from its harmonic trapping potential and allowing its position variance to grow, is a simple but effective expansion scheme, but requires accurate force compensation to avoid significant mean displacements of the wavepacket during the free evolution. Here, using an optical trap–release–recapture sequence, we demonstrate an electrostatic compensation technique that enables free evolution without significant mean displacement in 3D, effectively compensating both gravity and stray electric fields. To achieve 100 μs free evolution times with charged particles, we developed methods to map and correct for force cross-talk, as well as to control the environmental charge state. Combined with a low decoherence environment, our approach enables the preparation of largely delocalized states without the need for long freefall trajectories or a low-gravity environment.

arXiv:2509.17503•Applied Physics Letters•Nov 10, 2025•8 citations

An apparatus for in-vacuum loading of nanoparticles into an optical trap

Evan Weisman, Chethn Galla, Cris Montoya +7 more

We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.

arXiv:2208.02102•Review of Scientific Instruments•Nov 1, 2022•15 citations

Optical levitation in high vacuum using a 0.9-numerical-aperture lens

Mayu Tanaka, Shota Suetomo, Nao Osato +3 more

Nanoparticles levitated in high vacuum are isolated from the surrounding environment and thus can be used in various applications, including quantum physics research. We demonstrated optical levitation of a nanoparticle, which was trapped without cooling at a pressure of 4.5 × 10 −3 Pa, using a single aspheric lens with a large numerical aperture (= 0.9) and 1030-nm laser. We also activated parametric feedback cooling to trap the particle at a pressure of 5.8 × 10 −4 Pa. This experimental system will be useful for studying nanoparticles in ultrahigh vacuum and for building a mixed system with laser-cooled atoms.

Optics Continuum•Sep 7, 2023•0 citations

Optical centrifuge for nanoparticles

Peiyao Xiong, Ka Kit Kelvin Ho, Jonathan M. H. Gosling +2 more

We study theoretically the creation of an optical centrifuge for the controlled rotation of levitated nanorotors within an optical tweezer. The optical centrifuge's motion is simulated by rapidly rotating the linear polarization of the tightly focused optical field used to form an optical trap. We show that nanorotors, formed by anisotropic nanoparticles levitated within a trap, can be accelerated to well-defined rotational rates in excess of 100 MHz over durations of hundreds of microseconds. The initial conditions required for stable acceleration, based on optical trap properties and the anisotropic susceptibility of the nanorotor are established and confirmed by numerical simulations. We also present initial experiments that have developed tools for the rapid angular acceleration of the polarization vector of the linearly polarized beam that is required to create the centrifuge. We show that over acceleration durations in the 100 μ s range, high rotational speeds could be achieved in modest vacuum.

arXiv:2506.16134•Physical Review Research•Nov 21, 2025•1 citation

Hybrid Paul-optical trap with large optical access for levitated optomechanics

Eric Bonvin, Louisiane Devaud, Massimiliano Rossi +7 more

We present a hybrid trapping platform that allows us to levitate a charged nanoparticle in high vacuum using either optical fields, radio-frequency fields, or a combination thereof. Our hybrid approach combines an optical dipole trap with a linear Paul trap while maintaining a large numerical aperture (0.77 NA). We detail a controlled transfer procedure that allows us to use the Paul trap as a “safety net” to recover particles lost from the optical trap at high vacuum. The presented hybrid platform adds to the toolbox of levitodynamics and represents an important step towards fully controllable “dark” potentials, providing control in the absence of decoherence because of photon recoil. Published by the American Physical Society 2024

arXiv:2312.10131•Physical Review Research•Nov 12, 2024•28 citations

Cooling and manipulation of a levitated nanoparticle with an optical fiber trap

Pau Mestres, Johann Berthelot, Marko Spasenović +3 more

Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters, and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here, we report an approach based on a mobile optical trap operated under feedback control that enables cooling and long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.

arXiv:1505.02012•Applied Physics Letters•Oct 12, 2015•65 citations
We perform free-fall experiments with a charge-neutral, optically levitated nanoparticle. This is achieved using an optical tweezer that can be rapidly toggled on and off and vertically displaced, enabling the particle to be released and recaptured after each free fall. The particle is insensitive to electric fields due to its charge neutrality, and during free evolution, is not subject to photon recoil heating. We achieve free-fall durations of up to 0.25ms and observe a nearly 200-fold increase in the particle's position uncertainty at recapture. The current limit on the free-fall time arises from the performance of the initial cooling step. By implementing linear feedback techniques and reducing the background pressure, we expect to perform millisecond-scale free-fall experiments in an ultrahigh vacuum, opening new opportunities for generating large delocalizations of levitated objects.
Coherent wavepacket expansion is a key component of recent proposals aiming to create non-classical states of a levitated dielectric nanoparticle. Free evolution, i.e., releasing the particle from its harmonic trapping potential and allowing its position variance to grow, is a simple but effective expansion scheme, but requires accurate force compensation to avoid significant mean displacements of the wavepacket during the free evolution. Here, using an optical trap–release–recapture sequence, we demonstrate an electrostatic compensation technique that enables free evolution without significant mean displacement in 3D, effectively compensating both gravity and stray electric fields. To achieve 100 μs free evolution times with charged particles, we developed methods to map and correct for force cross-talk, as well as to control the environmental charge state. Combined with a low decoherence environment, our approach enables the preparation of largely delocalized states without the need for long freefall trajectories or a low-gravity environment.
We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.
Nanoparticles levitated in high vacuum are isolated from the surrounding environment and thus can be used in various applications, including quantum physics research. We demonstrated optical levitation of a nanoparticle, which was trapped without cooling at a pressure of 4.5 × 10 −3 Pa, using a single aspheric lens with a large numerical aperture (= 0.9) and 1030-nm laser. We also activated parametric feedback cooling to trap the particle at a pressure of 5.8 × 10 −4 Pa. This experimental system will be useful for studying nanoparticles in ultrahigh vacuum and for building a mixed system with laser-cooled atoms.
We study theoretically the creation of an optical centrifuge for the controlled rotation of levitated nanorotors within an optical tweezer. The optical centrifuge's motion is simulated by rapidly rotating the linear polarization of the tightly focused optical field used to form an optical trap. We show that nanorotors, formed by anisotropic nanoparticles levitated within a trap, can be accelerated to well-defined rotational rates in excess of 100 MHz over durations of hundreds of microseconds. The initial conditions required for stable acceleration, based on optical trap properties and the anisotropic susceptibility of the nanorotor are established and confirmed by numerical simulations. We also present initial experiments that have developed tools for the rapid angular acceleration of the polarization vector of the linearly polarized beam that is required to create the centrifuge. We show that over acceleration durations in the 100 μ s range, high rotational speeds could be achieved in modest vacuum.
We present a hybrid trapping platform that allows us to levitate a charged nanoparticle in high vacuum using either optical fields, radio-frequency fields, or a combination thereof. Our hybrid approach combines an optical dipole trap with a linear Paul trap while maintaining a large numerical aperture (0.77 NA). We detail a controlled transfer procedure that allows us to use the Paul trap as a “safety net” to recover particles lost from the optical trap at high vacuum. The presented hybrid platform adds to the toolbox of levitodynamics and represents an important step towards fully controllable “dark” potentials, providing control in the absence of decoherence because of photon recoil. Published by the American Physical Society 2024
Accurate delivery of small targets in high vacuum is a pivotal task in many branches of science and technology. Beyond the different strategies developed for atoms, proteins, macroscopic clusters, and pellets, the manipulation of neutral particles over macroscopic distances still poses a formidable challenge. Here, we report an approach based on a mobile optical trap operated under feedback control that enables cooling and long range 3D manipulation of a silica nanoparticle in high vacuum. We apply this technique to load a single nanoparticle into a high-finesse optical cavity through a load-lock vacuum system. We foresee our scheme to benefit the field of optomechanics with levitating nano-objects as well as ultrasensitive detection and monitoring.