Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.11481 · IEEE International Conference on Quantum Computing and Engineering (QCE)

Enhancing the Clique Local Decoder to Correct Length-2 Space Errors in the Surface Code

Zikang Jia, Shravan Veerapaneni, Gokul Subramanian Ravi

Published Aug 30, 2025• 0 citations
arXivHTMLPDF

Abstract

The growing demand for fault-tolerant quantum computing drives the need for efficient, scalable Quantum Error Correction (QEC) strategies. Conventional decoders designed for worst-case error scenarios incur significant overhead, prompting the development of local decoders, that leverage the sparse and often trivial nature of many quantum errors, to support the conventional decoders. The previously proposed Clique decoder addresses this by handling isolated, length-1 space and time errors within the cryogenic environment with minimal hardware costs, thereby mitigating I/O bandwidth constraints between cryogenic quantum systems and room-temperature processors. Building on this foundation, we propose Clique_L2 that extends the Clique-based approach by relaxing some original constraints and incorporating additional low-cost logic to also correct length-2 error chains in space, which become non-trivial occurrences at higher physical error rates and code distances. This enhanced capability not only further reduces out-of-thefridge data transmission but also adapts more effectively to clustered errors observed under a variety of noise models. Specifically, under data-qubit-only errors and uniformly random noise, Clique_L2 achieves up to 8.95x decoding bandwidth reduction over the original Clique (or Clique_L1) decoder, especially beneficial at higher code distances. When clustered errors and longer error chains are more likely to occur, Clique_L2 achieves up to$18.3 x$decoding bandwidth reduction over Clique_L1, achieving substantial benefits across a wide range of physical qubit error rates.

DOI
10.1109/qce65121.2025.00072

Related papers

Error correction for quantum computing at scale

Sam J. Griffiths

Quantum error correction (QEC) is considered essential for the development of scalable, fault-tolerant quantum computers in the medium- to long-term. By encoding quantum information across many physical qubits, carefully designed measurements can be taken to gain limited knowledge as to errors which may have occurred in the system, known as the error syndrome, with out causing quantum decoherence. In surface codes, qubits are arranged in a two-dimensional topological space, such as a torus or plane. In quantum low-density parity-check (qLDPC) codes, this is generalised to effectively arbitrary arrangements of qubits and syndrome checks. This work studies decoders: the algorithms responsible for inferring error correcting decisions from syndromes. In particular, the union–find decoder is studied in terms of its performance at scale. A simulation of a union–find decoding architecture is used to identify computational bottlenecks and pro pose improvements. In literature, it is assumed that the decoder runs in time scaling quadratically in the number of qubits under a naive implementation, but near-linearly when including two well-known optimisations. A key result is that, under independent and phenomenological noise models on surface codes, this complexity is strictly linear regardless of these optimisations. A supporting analytical argument is presented using percolation theory. Generalisation of the decoding problem to qLDPC codes is also studied, with approaches broadly relying on Gaussian elimination to find appropriate solutions. A strategy is proposed which uses a novel online variant of the Gaussian elimination algorithm to solve this linear system incrementally on growing local clusters, with accompanying complexity analysis and empir ical data demonstrating a reduction in runtime. An investigation into the use of metachecks is also presented, inspired by single-shot decoding, with implications for how such qLDPC decoders could be further improved.

•Dec 28, 2025•0 citations

Quantum Error Correction: Surface And Topological Codes

N Raji

Quantum error correction (QEC) represents a critical enabler for fault-tolerant quantum computing, protecting fragile quantum states from decoherence and operational errors. This paper provides a comprehensive analysis of leading quantum error correction schemes, focusing on surface codes and topological codes within the context of Noisy Intermediate-Scale Quantum (NISQ) era processors. We examine the theoretical foundations of stabilizer codes, compare surface code implementations with code distances ranging from d=3 to d=17, and analyze topological codes including toric codes and color codes. Our investigation encompasses syndrome extraction circuits, logical qubit encoding strategies, and threshold analysis for contemporary quantum hardware platforms. Performance metrics reveal that surface codes achieve error thresholds of approximately 1% with realistic noise models, while topological codes offer architectural advantages for specific qubit connectivity constraints. We discuss implementation challenges on current NISQ processors including IBM Quantum, Google Sycamore, and IonQ systems, addressing qubit overhead, gate fidelity requirements, and decoding algorithms. This analysis provides insights for selecting appropriate error correction schemes based on application requirements and hardware capabilities.

•Mar 12, 2026•0 citations

Local Predecoder to Reduce the Bandwidth and Latency of Quantum Error Correction

Samuel C. Smith, Benjamin J. Brown, Stephen D. Bartlett

A fault-tolerant quantum computer will be supported by a classical decoding system interfacing with quantum hardware to perform quantum error correction. It is important that the decoder can keep pace with the quantum clock speed, within the limitations on communication that are imposed by the physical architecture. To this end, we propose a local ``predecoder,'' which makes greedy corrections to reduce the amount of syndrome data sent to a standard matching decoder. We study these classical overheads for the surface code under a phenomenological phase-flip noise model with imperfect measurements. We find substantial improvements in the run time of the global decoder and the communication bandwidth by using the predecoder. For instance, to achieve a logical-failure probability of $f={10}^{\ensuremath{-}15}$ using qubits with physical error rate $p={10}^{\ensuremath{-}3}$ and a distance $d=22$ code, we find that the bandwidth cost is reduced by a factor of 1000 and that the time taken by a matching decoder is sped up by a factor of 200. To achieve this target failure probability, the predecoding approach requires a 50% increase in the qubit count compared with the optimal decoder.

arXiv:2208.04660•Physical Review Applied•Mar 15, 2023•44 citations

Accelerating the Tesseract Decoder for Quantum Error Correction

Dragana Grbic, Laleh Aghababaie Beni, Noah Shutty

Quantum Error Correction (QEC) is essential for building robust, fault-tolerant quantum computers; however, the decoding process often presents a significant computational bottleneck. Tesseract is a novel Most-Likely-Error (MLE) decoder for QEC that employs the A* search algorithm to explore an exponentially large graph of error hypotheses, achieving high decoding speed and accuracy. This paper presents a systematic approach to optimizing the Tesseract decoder through low-level performance enhancements. Based on extensive profiling, we implemented four targeted optimization strategies, including the replacement of inefficient data structures, reorganization of memory layouts to improve cache hit rates, and the use of hardware-accelerated bit-wise operations. We achieved significant decoding speedups across a wide range of code families and configurations, including Color Codes, Bivariate-Bicycle Codes, Surface Codes, and Transversal CNOT Protocols. Our results demonstrate consistent speedups of approximately 2x for most code families, often exceeding 2.5x. Notably, we achieved a peak performance gain of over 5x for the most computationally demanding configurations of Bivariate-Bicycle Codes. These improvements make the Tesseract decoder more efficient and scalable, serving as a practical case study that highlights the importance of high-performance software engineering in QEC and providing a strong foundation for future research.

quant-pharXiv:2602.02985•Feb 4, 2026•9 citations

AFS: Accurate, Fast, and Scalable Error-Decoding for Fault-Tolerant Quantum Computers

Poulami Das, Christopher A. Pattison, Srilatha Manne +4 more

Quantum computers promise computational advantages for many important problems across various application domains. Unfortunately, physical quantum devices are highly susceptible to errors that limit us from running most of these quantum applications. Quantum Error Correction (QEC) codes are required to implement Fault-Tolerant Quantum Computers (FTQC) on which computations can be performed without encountering errors. Error decoding is a critical component of quantum error correction and is responsible for transforming a set of qubit measurements generated by the QEC code, called the syndrome, into error locations and error types. For the feasibility of implementation, error decoders must not only identify errors with high accuracy, but also be fast and scalable to a large number of qubits. Unfortunately, most of the prior works on error decoding have focused primarily only on the accuracy and have relied on software implementations that are too slow to be of practical use. Furthermore, these studies only look at designing a single decoder and do not analyze the challenges involved in scaling the storage and bandwidth requirements when performing error correction in large systems with thousands of qubits.In this paper, we present AFS, an accurate, fast, and scalable decoder architecture that is designed to operate in the context of systems with hundreds of logical qubits. We present the hardware implementation of AFS, which is based on the Union Find decoding algorithm and employs a three-stage pipelined design. AFS provides orders of magnitude higher accuracy compared to recent SFQ-based hardware decoders (logical error rate of 6×10−10for physical error rate of 10−3) and low decoding latency (42ns on average), while being robust to measurement errors introduced while extracting syndromes during the QEC cycles. We also reduce the amount of decoding hardware required to perform QEC simultaneously on all the logical qubits by co-designing the micro-architecture across multiple decoding units. Our proposed Conjoined-Decoder Architecture (CDA) reduces the storage overhead by 70% (10MB to 2.8MB). Finally, we reduce the bandwidth overheads required to transmit syndromes from the qubits to the decoders by exploiting the sparsity in the syndromes and compressing the data. Our proposed Syndrome Compression reduces the bandwidth requirement by 30x, on an average.

IEEE International Symposium on High-Performance Computer Architecture (HPCA)•Apr 1, 2022•74 citations

Scalable Neural Decoders for Practical Fault-Tolerant Quantum Computation

Andi Gu, J. Pablo Bonilla Ataides, Mikhail D. Lukin +1 more

Quantum error correction (QEC) is essential for scalable quantum computing. However, it requires classical decoders that are fast and accurate enough to keep pace with quantum hardware. While quantum low-density parity-check codes have recently emerged as a promising route to efficient fault tolerance, current decoding algorithms do not allow one to realize the full potential of these codes in practical settings. Here, we introduce a convolutional neural network decoder that exploits the geometric structure of QEC codes, and use it to probe a novel "waterfall" regime of error suppression, demonstrating that the logical error rates required for large-scale fault-tolerant algorithms are attainable with modest code sizes at current physical error rates, and with latencies within the real-time budgets of several leading hardware platforms. For example, for the $[144, 12, 12]$ Gross code, the decoder achieves logical error rates up to $\sim 17$x below existing decoders - reaching logical error rates $\sim 10^{-10}$ at physical error $p=0.1\%$ - with 3-5 orders of magnitude higher throughput. This decoder also produces well-calibrated confidence estimates that can significantly reduce the time overhead of repeat-until-success protocols. Taken together, these results suggest that the space-time costs associated with fault-tolerant quantum computation may be significantly lower than previously anticipated.

quant-pharXiv:2604.08358•Apr 10, 2026•52 citations
The growing demand for fault-tolerant quantum computing drives the need for efficient, scalable Quantum Error Correction (QEC) strategies. Conventional decoders designed for worst-case error scenarios incur significant overhead, prompting the development of local decoders, that leverage the sparse and often trivial nature of many quantum errors, to support the conventional decoders. The previously proposed Clique decoder addresses this by handling isolated, length-1 space and time errors within the cryogenic environment with minimal hardware costs, thereby mitigating I/O bandwidth constraints between cryogenic quantum systems and room-temperature processors. Building on this foundation, we propose Clique_L2 that extends the Clique-based approach by relaxing some original constraints and incorporating additional low-cost logic to also correct length-2 error chains in space, which become non-trivial occurrences at higher physical error rates and code distances. This enhanced capability not only further reduces out-of-thefridge data transmission but also adapts more effectively to clustered errors observed under a variety of noise models. Specifically, under data-qubit-only errors and uniformly random noise, Clique_L2 achieves up to 8.95x decoding bandwidth reduction over the original Clique (or Clique_L1) decoder, especially beneficial at higher code distances. When clustered errors and longer error chains are more likely to occur, Clique_L2 achieves up to18.3x18.3 x18.3xdecoding bandwidth reduction over Clique_L1, achieving substantial benefits across a wide range of physical qubit error rates.
Quantum error correction (QEC) is considered essential for the development of scalable, fault-tolerant quantum computers in the medium- to long-term. By encoding quantum information across many physical qubits, carefully designed measurements can be taken to gain limited knowledge as to errors which may have occurred in the system, known as the error syndrome, with out causing quantum decoherence. In surface codes, qubits are arranged in a two-dimensional topological space, such as a torus or plane. In quantum low-density parity-check (qLDPC) codes, this is generalised to effectively arbitrary arrangements of qubits and syndrome checks. This work studies decoders: the algorithms responsible for inferring error correcting decisions from syndromes. In particular, the union–find decoder is studied in terms of its performance at scale. A simulation of a union–find decoding architecture is used to identify computational bottlenecks and pro pose improvements. In literature, it is assumed that the decoder runs in time scaling quadratically in the number of qubits under a naive implementation, but near-linearly when including two well-known optimisations. A key result is that, under independent and phenomenological noise models on surface codes, this complexity is strictly linear regardless of these optimisations. A supporting analytical argument is presented using percolation theory. Generalisation of the decoding problem to qLDPC codes is also studied, with approaches broadly relying on Gaussian elimination to find appropriate solutions. A strategy is proposed which uses a novel online variant of the Gaussian elimination algorithm to solve this linear system incrementally on growing local clusters, with accompanying complexity analysis and empir ical data demonstrating a reduction in runtime. An investigation into the use of metachecks is also presented, inspired by single-shot decoding, with implications for how such qLDPC decoders could be further improved.
Quantum error correction (QEC) represents a critical enabler for fault-tolerant quantum computing, protecting fragile quantum states from decoherence and operational errors. This paper provides a comprehensive analysis of leading quantum error correction schemes, focusing on surface codes and topological codes within the context of Noisy Intermediate-Scale Quantum (NISQ) era processors. We examine the theoretical foundations of stabilizer codes, compare surface code implementations with code distances ranging from d=3 to d=17, and analyze topological codes including toric codes and color codes. Our investigation encompasses syndrome extraction circuits, logical qubit encoding strategies, and threshold analysis for contemporary quantum hardware platforms. Performance metrics reveal that surface codes achieve error thresholds of approximately 1% with realistic noise models, while topological codes offer architectural advantages for specific qubit connectivity constraints. We discuss implementation challenges on current NISQ processors including IBM Quantum, Google Sycamore, and IonQ systems, addressing qubit overhead, gate fidelity requirements, and decoding algorithms. This analysis provides insights for selecting appropriate error correction schemes based on application requirements and hardware capabilities.
A fault-tolerant quantum computer will be supported by a classical decoding system interfacing with quantum hardware to perform quantum error correction. It is important that the decoder can keep pace with the quantum clock speed, within the limitations on communication that are imposed by the physical architecture. To this end, we propose a local ``predecoder,'' which makes greedy corrections to reduce the amount of syndrome data sent to a standard matching decoder. We study these classical overheads for the surface code under a phenomenological phase-flip noise model with imperfect measurements. We find substantial improvements in the run time of the global decoder and the communication bandwidth by using the predecoder. For instance, to achieve a logical-failure probability of $f={10}^{\ensuremath{-}15}$ using qubits with physical error rate $p={10}^{\ensuremath{-}3}$ and a distance d=22d=22d=22 code, we find that the bandwidth cost is reduced by a factor of 1000 and that the time taken by a matching decoder is sped up by a factor of 200. To achieve this target failure probability, the predecoding approach requires a 50% increase in the qubit count compared with the optimal decoder.
Quantum Error Correction (QEC) is essential for building robust, fault-tolerant quantum computers; however, the decoding process often presents a significant computational bottleneck. Tesseract is a novel Most-Likely-Error (MLE) decoder for QEC that employs the A* search algorithm to explore an exponentially large graph of error hypotheses, achieving high decoding speed and accuracy. This paper presents a systematic approach to optimizing the Tesseract decoder through low-level performance enhancements. Based on extensive profiling, we implemented four targeted optimization strategies, including the replacement of inefficient data structures, reorganization of memory layouts to improve cache hit rates, and the use of hardware-accelerated bit-wise operations. We achieved significant decoding speedups across a wide range of code families and configurations, including Color Codes, Bivariate-Bicycle Codes, Surface Codes, and Transversal CNOT Protocols. Our results demonstrate consistent speedups of approximately 2x for most code families, often exceeding 2.5x. Notably, we achieved a peak performance gain of over 5x for the most computationally demanding configurations of Bivariate-Bicycle Codes. These improvements make the Tesseract decoder more efficient and scalable, serving as a practical case study that highlights the importance of high-performance software engineering in QEC and providing a strong foundation for future research.
Quantum computers promise computational advantages for many important problems across various application domains. Unfortunately, physical quantum devices are highly susceptible to errors that limit us from running most of these quantum applications. Quantum Error Correction (QEC) codes are required to implement Fault-Tolerant Quantum Computers (FTQC) on which computations can be performed without encountering errors. Error decoding is a critical component of quantum error correction and is responsible for transforming a set of qubit measurements generated by the QEC code, called the syndrome, into error locations and error types. For the feasibility of implementation, error decoders must not only identify errors with high accuracy, but also be fast and scalable to a large number of qubits. Unfortunately, most of the prior works on error decoding have focused primarily only on the accuracy and have relied on software implementations that are too slow to be of practical use. Furthermore, these studies only look at designing a single decoder and do not analyze the challenges involved in scaling the storage and bandwidth requirements when performing error correction in large systems with thousands of qubits.In this paper, we present AFS, an accurate, fast, and scalable decoder architecture that is designed to operate in the context of systems with hundreds of logical qubits. We present the hardware implementation of AFS, which is based on the Union Find decoding algorithm and employs a three-stage pipelined design. AFS provides orders of magnitude higher accuracy compared to recent SFQ-based hardware decoders (logical error rate of 6×10−10for physical error rate of 10−3) and low decoding latency (42ns on average), while being robust to measurement errors introduced while extracting syndromes during the QEC cycles. We also reduce the amount of decoding hardware required to perform QEC simultaneously on all the logical qubits by co-designing the micro-architecture across multiple decoding units. Our proposed Conjoined-Decoder Architecture (CDA) reduces the storage overhead by 70% (10MB to 2.8MB). Finally, we reduce the bandwidth overheads required to transmit syndromes from the qubits to the decoders by exploiting the sparsity in the syndromes and compressing the data. Our proposed Syndrome Compression reduces the bandwidth requirement by 30x, on an average.
Quantum error correction (QEC) is essential for scalable quantum computing. However, it requires classical decoders that are fast and accurate enough to keep pace with quantum hardware. While quantum low-density parity-check codes have recently emerged as a promising route to efficient fault tolerance, current decoding algorithms do not allow one to realize the full potential of these codes in practical settings. Here, we introduce a convolutional neural network decoder that exploits the geometric structure of QEC codes, and use it to probe a novel "waterfall" regime of error suppression, demonstrating that the logical error rates required for large-scale fault-tolerant algorithms are attainable with modest code sizes at current physical error rates, and with latencies within the real-time budgets of several leading hardware platforms. For example, for the [144,12,12][144, 12, 12][144,12,12] Gross code, the decoder achieves logical error rates up to ∼17\sim 17∼17x below existing decoders - reaching logical error rates ∼10−10\sim 10^{-10}∼10−10 at physical error p=0.1%p=0.1\%p=0.1% - with 3-5 orders of magnitude higher throughput. This decoder also produces well-calibrated confidence estimates that can significantly reduce the time overhead of repeat-until-success protocols. Taken together, these results suggest that the space-time costs associated with fault-tolerant quantum computation may be significantly lower than previously anticipated.