Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.09298 · Applied Physics Letters

Impedance-engineered Josephson parametric amplifier with single-step lithography

Lipi Patel, Samarth Hawaldar, Aditya Panikkar, Athreya Shankar, Baladitya Suri

Published Dec 22, 2025• 0 citations
arXivHTMLPDF

Abstract

We present an experimental demonstration of an impedance-engineered Josephson parametric amplifier (IEJPA) fabricated in a single-step lithography process. Impedance-engineering is implemented using a lumped-element series LC circuit. We use a simpler lithography process where the entire device—impedance transformer and Josephson parametric amplifier (JPA)—is patterned in a single electron beam lithography step, followed by a double-angle Dolan-bridge technique for Al–AlOx–Al deposition. We observe amplification with 18 dB gain over a wide 400 MHz bandwidth centered around 5.3 GHz with added noise approaching the quantum limit, and a saturation power of −114 dBm. To accurately explain our experimental results, we extend existing theories for IEJPAs to incorporate the full sine nonlinearity of both the JPA and the transformer. Our work provides a route to simpler realization of broadband JPAs and a theoretical foundation for a regime of JPA operation that has been less explored in literature.

DOI
10.1063/5.0290636

Related papers

Broadband lumped-element Josephson parametric amplifier with single-step lithography

T. Elo, T. S. Abhilash, M. R. Perelshtein +3 more

We present a lumped-element Josephson parametric amplifier (JPA) fabricated using a straightforward e-beam lithography process. Our strongly coupled flux-pumped JPA achieves a gain of 20 dB with a bandwidth of 95 MHz around 5 GHz, while the center frequency is tunable by more than 1 GHz, with the additional possibility for rapid tuning by varying the pump frequency alone. Analytical calculations based on the input-output theory reproduce our measurement results closely.

arXiv:1812.07621•Applied Physics Letters•Apr 15, 2019•25 citations

Fabrication and characterization of all-Nb lumped-element Josephson parametric amplifiers*

Hang Xue, Zhirong Lin, Wenbing Jiang +4 more

Josephson parametric amplifiers (JPAs) with nearly quantum-limited noise performance have become indispensable devices for the measurements of superconducting quantum information. We have developed an all-Nb lumped-element flux-driven JPA operating in the three-wave mixing mode. Our Nb-based JPA comprises Nb/Al-AlO x /Nb Josephson junctions, a parallel-plate capacitor with SiO2 dielectric sandwiched between two Nb layers, a bottom coplanar waveguides layer, and a top Nb wiring layer. We experimentally demonstrate a 20 dB gain over a 190 MHz bandwidth, a mean 1 dB compression of –123 dBm, and near quantum-limited noise performance. This fabrication process can be further used to design impedance transformed parametric amplifiers for multiple-qubit readout.

Chinese Physics B•Mar 16, 2021•5 citations

Fabrication and characterization of impedance-transformed Josephson parametric amplifier

Zheng-Yang Mei, Xiaohui Song, X. C. Guo +10 more

In this paper, we introduce a method of using a double-layer resist lift-off process to prepare the capacitor dielectric layer for fabricating impedance-engineered Josephson parametric amplifiers (IMPAs). Compared to prior art, this method enhances fabrication success rate and accelerates production. The IMPA we made, experimentally achieves an instantaneous bandwidth over 950 (600) MHz with a gain exceeding 10 (14) dB, along with saturation input power of −115 dBm and near quantum-limited noise. We demonstrate the negligible backaction from the IMPA on superconducting qubits, resulting in no significant degradation of the relaxation time and coherence time of the qubits. The IMPA improves the signal-to-noise ratio from 1.69 to 14.56 and enables the amplification chain to achieve high quantum efficiency with η ≈ 0.26, making it a critical necessity for large-scale quantum computation.

arXiv:2503.06936•AIP Advances•Jul 1, 2025•1 citation

An easily-prepared impedance matched Josephson parametric amplifier*

Yapeng Lu, Quan Zuo, Jiazheng Pan +11 more

An impedance matched parametric amplifier (IMPA) with Josephson junctions is fabricated and characterized. A hybrid structure containing coplanar and strip structures is implemented to realize an impedance taper line and a plate capacitor in an LC nonlinear resonator based on Josephson junctions. The upper plate of the capacitor is isolated with SiN x without grounding as well as the strips. Such easily-prepared designs greatly reduce the requirements for lithography alignment and precision, which makes the fabrication process more reliable. The experimental results show that in such IMPA a gain higher than 25 dB with a bandwidth of about 100 MHz can be obtained. This broadband amplifier operates close to the quantum limit. By adjusting the working point, a higher bandwidth of about 400 MHz can be obtained with a gain of about 17 dB.

Chinese Physics B•May 24, 2021•7 citations

Fabrication of the Impedance-Matched Josephson Parametric Amplifier and the Study of the Gain Profile

Rui Liang Yang, Huiqiu Deng

We designed and fabricated an impedance-matched Josephson parametric amplifier (JPA) working in the flux-pump mode for the broadband amplification of microwave signals. A simple fabrication method suitable for a small cleanroom was developed. We also studied the phase response, as well as the gain, as a function of signal frequency and pump power at various pump frequencies. The phase response can be explained with the behavior of the nonlinear Duffing oscillator. The observed decrease of the resonance frequency as the pump power increases, as well as the emergence of an unstable bifurcation zone, are the characteristic nonlinear behavior of the Duffing oscillator. The features of the gain profile in the stable zone can be explained with a model adapted from the theoretical model for the two-dimensional gain profile of an impedance-matched, current-pumped JPA. Over 17 dB gain with a bandwidth more than 300 MHz (centered around 6.45 GHz) was observed. Our impedance-matched JPA is used for improving the fast readout fidelity of transmon qubits.

arXiv:1909.00707•IEEE Transactions on Applied Superconductivity•Apr 6, 2020•15 citations

Flux-pumped impedance-engineered broadband Josephson parametric amplifier

Joel Grebel, Audrey Bienfait, Étienne Dumur +7 more

Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.

Applied Physics Letters•Apr 5, 2021•54 citations
We present an experimental demonstration of an impedance-engineered Josephson parametric amplifier (IEJPA) fabricated in a single-step lithography process. Impedance-engineering is implemented using a lumped-element series LC circuit. We use a simpler lithography process where the entire device—impedance transformer and Josephson parametric amplifier (JPA)—is patterned in a single electron beam lithography step, followed by a double-angle Dolan-bridge technique for Al–AlOx–Al deposition. We observe amplification with 18 dB gain over a wide 400 MHz bandwidth centered around 5.3 GHz with added noise approaching the quantum limit, and a saturation power of −114 dBm. To accurately explain our experimental results, we extend existing theories for IEJPAs to incorporate the full sine nonlinearity of both the JPA and the transformer. Our work provides a route to simpler realization of broadband JPAs and a theoretical foundation for a regime of JPA operation that has been less explored in literature.
Josephson parametric amplifiers (JPAs) with nearly quantum-limited noise performance have become indispensable devices for the measurements of superconducting quantum information. We have developed an all-Nb lumped-element flux-driven JPA operating in the three-wave mixing mode. Our Nb-based JPA comprises Nb/Al-AlO x /Nb Josephson junctions, a parallel-plate capacitor with SiO2 dielectric sandwiched between two Nb layers, a bottom coplanar waveguides layer, and a top Nb wiring layer. We experimentally demonstrate a 20 dB gain over a 190 MHz bandwidth, a mean 1 dB compression of –123 dBm, and near quantum-limited noise performance. This fabrication process can be further used to design impedance transformed parametric amplifiers for multiple-qubit readout.
In this paper, we introduce a method of using a double-layer resist lift-off process to prepare the capacitor dielectric layer for fabricating impedance-engineered Josephson parametric amplifiers (IMPAs). Compared to prior art, this method enhances fabrication success rate and accelerates production. The IMPA we made, experimentally achieves an instantaneous bandwidth over 950 (600) MHz with a gain exceeding 10 (14) dB, along with saturation input power of −115 dBm and near quantum-limited noise. We demonstrate the negligible backaction from the IMPA on superconducting qubits, resulting in no significant degradation of the relaxation time and coherence time of the qubits. The IMPA improves the signal-to-noise ratio from 1.69 to 14.56 and enables the amplification chain to achieve high quantum efficiency with η ≈ 0.26, making it a critical necessity for large-scale quantum computation.
An impedance matched parametric amplifier (IMPA) with Josephson junctions is fabricated and characterized. A hybrid structure containing coplanar and strip structures is implemented to realize an impedance taper line and a plate capacitor in an LC nonlinear resonator based on Josephson junctions. The upper plate of the capacitor is isolated with SiN x without grounding as well as the strips. Such easily-prepared designs greatly reduce the requirements for lithography alignment and precision, which makes the fabrication process more reliable. The experimental results show that in such IMPA a gain higher than 25 dB with a bandwidth of about 100 MHz can be obtained. This broadband amplifier operates close to the quantum limit. By adjusting the working point, a higher bandwidth of about 400 MHz can be obtained with a gain of about 17 dB.
We designed and fabricated an impedance-matched Josephson parametric amplifier (JPA) working in the flux-pump mode for the broadband amplification of microwave signals. A simple fabrication method suitable for a small cleanroom was developed. We also studied the phase response, as well as the gain, as a function of signal frequency and pump power at various pump frequencies. The phase response can be explained with the behavior of the nonlinear Duffing oscillator. The observed decrease of the resonance frequency as the pump power increases, as well as the emergence of an unstable bifurcation zone, are the characteristic nonlinear behavior of the Duffing oscillator. The features of the gain profile in the stable zone can be explained with a model adapted from the theoretical model for the two-dimensional gain profile of an impedance-matched, current-pumped JPA. Over 17 dB gain with a bandwidth more than 300 MHz (centered around 6.45 GHz) was observed. Our impedance-matched JPA is used for improving the fast readout fidelity of transmon qubits.
Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.