Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.08539 · Chinese Optics Letters

Electric field measurements of a Rydberg atomic frequency comb based on pulsed laser excitation

Ke Di, Chenglin Ye, Yijie Du, Yu Liu, Feng Gao, Jiajia Du, Jun He

Published Jan 1, 2026• 1 citation
arXivHTMLPDF

Abstract

We present an innovative frequency comb methodology utilizing pulsed lasers for Rydberg atoms and implement it for electric field measurement. It achieves the Rydberg state population of multi-velocity group atoms through the two-photon resonant excitation of a 509 nm pulsed laser and an 852 nm continuous laser. The frequency comb approach markedly elevates the population of Rydberg atoms and augments the atomic density for sensing, thereby enhancing measurement sensitivity. Our investigations generated high-sensitivity measurements of electric fields across a broad spectrum from 20 kHz to 96 MHz, with a minimum measured electric field sensitivity of 2.9uV/cm/Hz(1/2). Additionally, we have exhibited a high degree of measurement sensitivity in the 66 MHz and 88 MHz broadcast communication frequencies. This research enhances the effective detection of microwave signals over a broad spectrum of frequency bands utilizing Rydberg atoms and introduces an innovative technical methodology for microwave metrology grounded in Rydberg atoms.

DOI
10.3788/col202624.050201

Related papers

Theoretical and experimental study of the correlation between pulsed light repetition frequency and electric field measurement

Ke Di, Ye Chenglin Ye, Meihui Liu +4 more

We propose a novel, to the best of our knowledge, approach for improving the performance of Rydberg atom sensors by utilizing the repetition frequency of pulsed lasers, which has been validated through experimental testing. Rydberg atoms excited by pulsed lasers are influenced significantly by the repetition frequency of the pulsed laser on the Rydberg state population. As the number of Rydberg atoms increases, the measurement sensitivity of the sensor to external fields also increases, directly enhancing the performance of the sensor. This paper investigates the response of the sensor to the same electric field when the repetition frequency of the pulsed laser is at the MHz level, with a focus on its gain effects on the broadcast communication frequency bands of 66 MHz and 88 MHz. This research substantiates the distinctive benefits of pulsed light for Rydberg atom excitation, thereby enhancing the efficacy of the detection of feeble signals and introducing a new approach for the development of more sensitive atomic sensors.

arXiv:2508.18629•Optics Letters•Feb 17, 2026•0 citations

Highly Sensitive Measurement of a Megahertz rf Electric Field with a Rydberg-Atom Sensor

Bang Liu, Lihua Zhang, Zong-Kai Liu +6 more

Rydberg atoms have great potential in electric field measurement and have an advantage with a large frequency bandwidth from the kHz to the THz scale. However, the sensitivity for measuring a weak MHz electric field signal is limited by the spectroscopic resolution, because the weak electric field induces only a small perturbation of the population and energy-level shift of the Rydberg atoms. Here, we report highly sensitive measurement of a weak MHz electric field using electromagnetically induced transparency with Rydberg atoms in a thermal atomic system. Using the heterodyne method on a 30-MHz electric field, we successfully measure the minimum electric field strength to be $37.3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}/\mathrm{cm}$ with a sensitivity up to $\ensuremath{-}65$ dBm/Hz and a linear dynamic range over 65 dB. Additionally, we measure an amplitude-modulated signal and demodulate the signal with a fidelity over 98%. This work extends the sensitivity of atomic sensors for measuring MHz electric fields, which advances atomic electric field-sensing technology.

arXiv:2206.06576•Physical Review Applied•Jul 19, 2022•110 citations

Broadband Heterodyne Microwave Detection using Rydberg Atoms with High Sensitivity

Hsuan-Jui Su, Shao-Cheng Fang, Ting-An Li +3 more

We present a Rydberg atom-based microwave electric field sensor that achieves extended dynamic range and enhanced sensitivity across a broad bandwidth. By characterizing the Autler-Townes (AT) splitting induced by a single-tone microwave field, we demonstrate a spectroscopic method that simultaneously extracts both the microwave frequency and electric field strength directly from the splitting pattern. We implement dual-tone heterodyne detection, achieving a minimum detectable field strength on the order of uV/cm and a sensitivity in the sub-uV/cm/Hz^1/2 regime, while extending the operational bandwidth up to 3 GHz. Through systematic characterization of frequency and power dependencies, we identify optimal operating conditions to minimize power broadening in the resonant AT regime and maximize sensitivity in the far-off-resonance AC Stark regime. The resulting platform combines high sensitivity, broad bandwidth, and a dynamic range of approximately 90 dB, establishing Rydberg atoms as practical sensors for precision electric field metrology.

physics.atom-phCross-listedarXiv:2601.19305•Jan 28, 2026•1 citation

Super low-frequency electric field measurement based on Rydberg atoms

Ling Li, Yuechun Jiao, Jinlian Hu +4 more

We demonstrate the measurement of super low-frequency electric field using Rydberg atoms in an atomic vapor cell with inside parallel electrodes, thus overcoming the low-frequency electric-field-screening effect at frequencies below a few kHz. Rydberg electromagnetically induced transparency (EIT) spectra involving 52 D 5/2 state is employed to measure the signal electric field. An auxiliary DC field is applied to improve the sensitivity. A DC Stark map is demonstrated, where the utilized 52 D 5/2 exhibits m j = 1/2, 3/2, 5/2 Stark shifts and splittings. The m j = 1/2 state is employed to detect the signal field because of its larger polarizability than that of m j = 3/2, 5/2. Also, we show that the strength of the spectrum is dependent on the angle between the laser polarizations and the electric field. With optimization of the applied DC field to shift the m j = 1/2 Rydberg energy level to a high sensitivity region and the laser polarizations to obtain the maximum m j = 1/2 signal, we achieve the detection of the signal electric field with a frequency of 100 Hz down to 214.8 µ V/cm with a sensitivity of 67.9 µ V cm −1 Hz −1/2 , and the linear dynamic range is over 37 dB. Our work extends the measurement frequency of Rydberg sensors to super low frequency with high sensitivity, which has the advantages of high sensitivity and miniaturization for receiving super low frequency.

Optics Express•Aug 9, 2023•49 citations

Rydberg atomic spectroscopy based on nanosecond pulsed laser excitation

Ting CAI, Jun He, Zhihui Liu +6 more

Through the cascade excitation of 852-nm continuous-wave (CW) laser and 509-nm nanosecond pulsed laser, the electromagnetically-induced transparency (EIT) spectroscopic signals of ladder-type three-level cesium atoms with Rydberg state are obtained by using a room-temperature cesium vapor cell. The power of 509-nm pulsed laser beam is ~176 W, while the pulse repetition frequency ranges from 300 kHz to 100 MHz and can be continuously adjusted. The laser pulse duration runs from 1 to 100 ns and can be continuously adjusted. The relationship between Rydberg EIT spectroscopic signals and 509-nm nanosecond pulsed laser parameters is investigated experimentally. By changing the pulse repetition frequency and the pulse duration of the 509-nm nanosecond pulsed laser, the comb-like Rydberg atomic spectrum is obtained by using a room-temperature cesium vapor cell. Within a certain range of repetition frequency and pulse duration, the envelope of spectral lines shows a regular pattern, and the spacing between the transmission peaks is consistent with the pulse repetition frequency. By changing the 509-nm laser pulse repetition frequency and pulse duration, atoms with the specific velocity group can be excited to Rydberg state. Reducing the repetition frequency of the 509-nm pulsed coupling laser can further increase the number of atoms in the Rydberg state in comparison with the case of finite velocity group pumping of cesium atoms by a continuous-wave laser. When the repetition frequency of the 509-nm pulsed laser approaches the EIT linewidth, the number of cesium Rydberg atoms can be increased by up to 10 times. In the parameter optimization process, the dynamic characteristics of pulsed excitation in multi-level atoms, as well as the interaction characteristics between arbitrarily shaped laser pulses and multi-level atomic systems, should be considered. Pulsed laser pumping can achieve the interaction between the laser field and atomic group with a specific velocity, and its developed atomic frequency comb spectra can be used for electric and magnetic field measurements. The multi-peak structure of the spectrum can be used to more accurately determine the intensity, frequency, and phase of the microwave electric field by measuring spectral variations. This high-sensitivity and high-resolution measurement capability is crucial for precisely measuring microwave electric fields. The pulsed coupling laser can excite atoms in a specific velocity group to the Rydberg state. High-density Rydberg atoms can improve the signal-to-noise ratio of the measured spectrum, which has potential applications in quantum sensing and quantum measurement based on Rydberg atoms.

Acta Physica Sinica•Nov 27, 2024•3 citations

Rydberg-Atom-Based Electrometry Using a Self-Heterodyne Frequency-Comb Readout and Preparation Scheme

Katelyn Dixon, Kent A. Nickerson, Donald W. Booth +1 more

Atom-based radio-frequency (rf) electromagnetic field sensing using atomic Rydberg states is a promising technique that has recently attracted significant interest. Its unique advantages, such as extraordinary bandwidth, self-calibration, and all-dielectric sensors, are a tangible improvement over antenna-based methods in applications such as test and measurement and development of broad-bandwidth receivers. Here, we demonstrate how an optical-frequency comb can be used to acquire data in the Autler-Townes regime of Rydberg-atom-based electrometry in a massively parallel fashion, eliminating the need for laser scanning. Two-photon electromagnetically induced transparency readout and preparation of cesium is used for the demonstration. A flat quasicontinuous optical comb is generated with the probe laser at 852 nm using an electro-optic modulator and arbitrary waveform generator. A single-frequency coupling laser at 509 nm is tuned to the Rydberg launch state. An enhanced transmission signal is obtained using self-heterodyne spectroscopy, where the comb signal is beat against a local oscillator derived from the single-frequency probe laser on a fast photodiode. The transmission of each probe-laser comb tooth is observed. We resolve electromagnetically induced transparency peaks with line widths below 5 MHz, with and without laser locking. Radio-frequency electromagnetic fields as low as $66\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}$ are detected, with sensitivities of $2.3\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}{\mathrm{Hz}}^{\ensuremath{-}1/2}$. The method offers a significant advantage for reading out electromagnetically induced transparency and Autler-Townes splitting, as neither laser needs to be scanned and slow frequency drifts can be tolerated in some applications. The method enables the detection of the amplitude of a pulsed rf electromagnetic field when the incoming pulse Autler-Townes splits the electromagnetically induced transparency peak.

arXiv:2209.02583•Physical Review Applied•Mar 23, 2023•39 citations
We present an innovative frequency comb methodology utilizing pulsed lasers for Rydberg atoms and implement it for electric field measurement. It achieves the Rydberg state population of multi-velocity group atoms through the two-photon resonant excitation of a 509 nm pulsed laser and an 852 nm continuous laser. The frequency comb approach markedly elevates the population of Rydberg atoms and augments the atomic density for sensing, thereby enhancing measurement sensitivity. Our investigations generated high-sensitivity measurements of electric fields across a broad spectrum from 20 kHz to 96 MHz, with a minimum measured electric field sensitivity of 2.9uV/cm/Hz(1/2). Additionally, we have exhibited a high degree of measurement sensitivity in the 66 MHz and 88 MHz broadcast communication frequencies. This research enhances the effective detection of microwave signals over a broad spectrum of frequency bands utilizing Rydberg atoms and introduces an innovative technical methodology for microwave metrology grounded in Rydberg atoms.
We propose a novel, to the best of our knowledge, approach for improving the performance of Rydberg atom sensors by utilizing the repetition frequency of pulsed lasers, which has been validated through experimental testing. Rydberg atoms excited by pulsed lasers are influenced significantly by the repetition frequency of the pulsed laser on the Rydberg state population. As the number of Rydberg atoms increases, the measurement sensitivity of the sensor to external fields also increases, directly enhancing the performance of the sensor. This paper investigates the response of the sensor to the same electric field when the repetition frequency of the pulsed laser is at the MHz level, with a focus on its gain effects on the broadcast communication frequency bands of 66 MHz and 88 MHz. This research substantiates the distinctive benefits of pulsed light for Rydberg atom excitation, thereby enhancing the efficacy of the detection of feeble signals and introducing a new approach for the development of more sensitive atomic sensors.
Rydberg atoms have great potential in electric field measurement and have an advantage with a large frequency bandwidth from the kHz to the THz scale. However, the sensitivity for measuring a weak MHz electric field signal is limited by the spectroscopic resolution, because the weak electric field induces only a small perturbation of the population and energy-level shift of the Rydberg atoms. Here, we report highly sensitive measurement of a weak MHz electric field using electromagnetically induced transparency with Rydberg atoms in a thermal atomic system. Using the heterodyne method on a 30-MHz electric field, we successfully measure the minimum electric field strength to be $37.3\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}/\mathrm{cm}$ with a sensitivity up to $\ensuremath{-}65$ dBm/Hz and a linear dynamic range over 65 dB. Additionally, we measure an amplitude-modulated signal and demodulate the signal with a fidelity over 98%. This work extends the sensitivity of atomic sensors for measuring MHz electric fields, which advances atomic electric field-sensing technology.
We present a Rydberg atom-based microwave electric field sensor that achieves extended dynamic range and enhanced sensitivity across a broad bandwidth. By characterizing the Autler-Townes (AT) splitting induced by a single-tone microwave field, we demonstrate a spectroscopic method that simultaneously extracts both the microwave frequency and electric field strength directly from the splitting pattern. We implement dual-tone heterodyne detection, achieving a minimum detectable field strength on the order of uV/cm and a sensitivity in the sub-uV/cm/Hz^1/2 regime, while extending the operational bandwidth up to 3 GHz. Through systematic characterization of frequency and power dependencies, we identify optimal operating conditions to minimize power broadening in the resonant AT regime and maximize sensitivity in the far-off-resonance AC Stark regime. The resulting platform combines high sensitivity, broad bandwidth, and a dynamic range of approximately 90 dB, establishing Rydberg atoms as practical sensors for precision electric field metrology.
We demonstrate the measurement of super low-frequency electric field using Rydberg atoms in an atomic vapor cell with inside parallel electrodes, thus overcoming the low-frequency electric-field-screening effect at frequencies below a few kHz. Rydberg electromagnetically induced transparency (EIT) spectra involving 52 D 5/2 state is employed to measure the signal electric field. An auxiliary DC field is applied to improve the sensitivity. A DC Stark map is demonstrated, where the utilized 52 D 5/2 exhibits m j = 1/2, 3/2, 5/2 Stark shifts and splittings. The m j = 1/2 state is employed to detect the signal field because of its larger polarizability than that of m j = 3/2, 5/2. Also, we show that the strength of the spectrum is dependent on the angle between the laser polarizations and the electric field. With optimization of the applied DC field to shift the m j = 1/2 Rydberg energy level to a high sensitivity region and the laser polarizations to obtain the maximum m j = 1/2 signal, we achieve the detection of the signal electric field with a frequency of 100 Hz down to 214.8 µ V/cm with a sensitivity of 67.9 µ V cm −1 Hz −1/2 , and the linear dynamic range is over 37 dB. Our work extends the measurement frequency of Rydberg sensors to super low frequency with high sensitivity, which has the advantages of high sensitivity and miniaturization for receiving super low frequency.
Through the cascade excitation of 852-nm continuous-wave (CW) laser and 509-nm nanosecond pulsed laser, the electromagnetically-induced transparency (EIT) spectroscopic signals of ladder-type three-level cesium atoms with Rydberg state are obtained by using a room-temperature cesium vapor cell. The power of 509-nm pulsed laser beam is ~176 W, while the pulse repetition frequency ranges from 300 kHz to 100 MHz and can be continuously adjusted. The laser pulse duration runs from 1 to 100 ns and can be continuously adjusted. The relationship between Rydberg EIT spectroscopic signals and 509-nm nanosecond pulsed laser parameters is investigated experimentally. By changing the pulse repetition frequency and the pulse duration of the 509-nm nanosecond pulsed laser, the comb-like Rydberg atomic spectrum is obtained by using a room-temperature cesium vapor cell. Within a certain range of repetition frequency and pulse duration, the envelope of spectral lines shows a regular pattern, and the spacing between the transmission peaks is consistent with the pulse repetition frequency. By changing the 509-nm laser pulse repetition frequency and pulse duration, atoms with the specific velocity group can be excited to Rydberg state. Reducing the repetition frequency of the 509-nm pulsed coupling laser can further increase the number of atoms in the Rydberg state in comparison with the case of finite velocity group pumping of cesium atoms by a continuous-wave laser. When the repetition frequency of the 509-nm pulsed laser approaches the EIT linewidth, the number of cesium Rydberg atoms can be increased by up to 10 times. In the parameter optimization process, the dynamic characteristics of pulsed excitation in multi-level atoms, as well as the interaction characteristics between arbitrarily shaped laser pulses and multi-level atomic systems, should be considered. Pulsed laser pumping can achieve the interaction between the laser field and atomic group with a specific velocity, and its developed atomic frequency comb spectra can be used for electric and magnetic field measurements. The multi-peak structure of the spectrum can be used to more accurately determine the intensity, frequency, and phase of the microwave electric field by measuring spectral variations. This high-sensitivity and high-resolution measurement capability is crucial for precisely measuring microwave electric fields. The pulsed coupling laser can excite atoms in a specific velocity group to the Rydberg state. High-density Rydberg atoms can improve the signal-to-noise ratio of the measured spectrum, which has potential applications in quantum sensing and quantum measurement based on Rydberg atoms.
Atom-based radio-frequency (rf) electromagnetic field sensing using atomic Rydberg states is a promising technique that has recently attracted significant interest. Its unique advantages, such as extraordinary bandwidth, self-calibration, and all-dielectric sensors, are a tangible improvement over antenna-based methods in applications such as test and measurement and development of broad-bandwidth receivers. Here, we demonstrate how an optical-frequency comb can be used to acquire data in the Autler-Townes regime of Rydberg-atom-based electrometry in a massively parallel fashion, eliminating the need for laser scanning. Two-photon electromagnetically induced transparency readout and preparation of cesium is used for the demonstration. A flat quasicontinuous optical comb is generated with the probe laser at 852 nm using an electro-optic modulator and arbitrary waveform generator. A single-frequency coupling laser at 509 nm is tuned to the Rydberg launch state. An enhanced transmission signal is obtained using self-heterodyne spectroscopy, where the comb signal is beat against a local oscillator derived from the single-frequency probe laser on a fast photodiode. The transmission of each probe-laser comb tooth is observed. We resolve electromagnetically induced transparency peaks with line widths below 5 MHz, with and without laser locking. Radio-frequency electromagnetic fields as low as $66\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}$ are detected, with sensitivities of $2.3\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}{\mathrm{Hz}}^{\ensuremath{-}1/2}$. The method offers a significant advantage for reading out electromagnetically induced transparency and Autler-Townes splitting, as neither laser needs to be scanned and slow frequency drifts can be tolerated in some applications. The method enables the detection of the amplitude of a pulsed rf electromagnetic field when the incoming pulse Autler-Townes splits the electromagnetically induced transparency peak.