Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.08089 · Physical Review Applied

Improving the performance of transmon qubits with fluorine-based surface treatments

Michael Gingras, Bethany M. Niedzielski, Kevin A. Grossklaus, Duncan Miller, Felipe Contipelli, Kate Azar, Luke Burkhart, Greg Calusine, Daniel Davis, Renee DePencier Pinero, Jeffrey Gertler, Thomas Hazard, Cyrus F. Hirjibehedin, David K. Kim, J.M. Knecht, Alexander J. Melville, Christopher O’Connell, Robert A. Rood, Ali Sabbah, Hannah Stickler, Jonilyn Yoder, William D. Oliver, Mollie E. Schwartz, Kyle Serniak

Published May 26, 2026• 9 citations
arXivHTMLPDF

Abstract

Reducing materials and processing-induced decoherence is critical to the development of utility-scale quantum processors based on superconducting qubits. Here we report on the impact of two fluorine-based wet etches, which we use to treat the silicon surface underneath the Josephson junctions (JJs) of fixed-frequency transmon qubits made with aluminum base metallization. Using several materials analysis techniques, we demonstrate that these surface treatments can remove germanium residue introduced by our JJ fabrication with no other changes to the overall process flow. These surface treatments result in significantly improved energy relaxation times for the highest performing process, with median $T_1=334~μ$s, corresponding to quality factor $Q=6.6\times10^6$. This result suggests that the metal-substrate interface directly underneath the JJs was a major contributor to microwave loss in these transmon qubit circuits prior to integration of these surface treatments. Furthermore, this work illustrates how materials analysis can be used in conjunction with quantum device performance metrics to improve performance in superconducting qubits.

DOI
10.1103/x1gl-mx6f

Related papers

Enhanced superconducting qubit performance through ammonium fluoride etch

Cameron Kopas, Dominic P. Goronzy, Thang Pham +19 more

Abstract The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median T 1 by ∼ 22 % (p = 0.002), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch after niobium deposition and etching also show ∼ 33 % lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS losses.

arXiv:2408.02863•Materials for Quantum Technology•Oct 18, 2024•10 citations

Characterization and Comparison of Energy Relaxation in Fluxonium Qubits

Kate Azar, Lamia Ateshian, Mallika T. Randeria +19 more

Fluxonium superconducting qubits have demonstrated long coherence times and high single- and two-qubit gate fidelities, making them a favorable building block for superconducting quantum processors. We investigate the dominant limitations to fluxonium qubit energy relaxation time $T_1$ using a set of eight planar, aluminum-on-silicon qubits. We find that a circuit-based model for capacitive dielectric loss best captures the frequency dependence of $T_1$, which we analyze within both a two-level and a six-level energy relaxation model. We convert the measured $T_1$ into an effective capacitive quality factor $Q_\mathrm{C}^{\mathrm{eff}}$ to compare qubits on equal footing, accounting for independently estimated contributions from $1/f$ flux noise and radiative loss to the control and readout circuitry. We apply this methodology to compare qubits from two fabrication processes: a baseline process and one that applies a fluorine-based wet treatment prior to Josephson junction deposition. We resolve a small improvement of (13.8 $\pm$ 8.4$)\%$ in the process mean $Q_\mathrm{C}^{\mathrm{eff}}$, indicating that the fluorine treatment may have reduced loss from the metal-substrate interface, but did not address the primary source of loss in these fluxonium qubits.

quant-pharXiv:2603.23636•Physical Review Research•Mar 26, 2026•8 citations

Surface Optimization of Superconducting Aluminum Resonators for Robust Quantum Device Fabrication

Simon J. K. Lang, Ignaz Eisele, Alwin Maiwald +8 more

Aluminum (Al) remains the central material for superconducting qubits, and considerable effort has been devoted to optimizing its deposition and patterning for quantum devices. However, post-processing strategies focused on oxide removal of niobium (Nb) and tantalum (Ta) -based resonators using buffered oxide etch (BOE), which can not be used for Al. This challenge becomes particularly relevant for industry-scale fabrication with multi-chip bonding, where delays between sample preparation and cooldown require surface treatments that preserve low dielectric loss during extended exposure to ambient conditions. In this work, we investigate surface modification approaches for Al resonators subjected to a 24-hour delay prior to cryogenic measurement. Passivation using self-limiting oxygen and fluorine chemistries was evaluated utilizing different plasma processes. Remote oxygen plasma treatment reduced dielectric losses, in contrast to direct oxygen plasma. A fluorine-based plasma process was developed that passivated the Al surface for subsequent BOE treatment. However, the fluorine content in the surface resulted in higher loss, identifying fluorine as an unsuitable passivation material for Al resonators. Above all, selective oxide removal using HF (hydrogen fluoride) vapor and phosphoric acid yielded median dielectric losses as low as $\tildeδ_\mathrm{LP} = 5.7 \times 10^{-7}$ ($Q_\mathrm{LP} \approx 1.7\,\mathrm{M}$) with $\tildeδ_\mathrm{TLS} = 3.6 \times 10^{-7}$ ($Q_\mathrm{TLS} \approx 2.8\,\mathrm{M}$) in the single photon regime. Selective oxide removal provides a promising pathway for robust Al-based qubit fabrication, as it preserves low dielectric losses for a 24-hour delay before cooldown.

quant-pharXiv:2601.04082•Physical Review Applied•Jan 8, 2026•1 citation

Improving the Lifetime of Aluminum-Based Superconducting Qubits through Atomic Layer Etching and Deposition

Neha Mahuli, Joaquín Minguzzi, Jiansong Gao +9 more

We present a dry surface treatment combining atomic layer etching and deposition (ALE and ALD) to mitigate dielectric loss in fully fabricated superconducting quantum devices formed from aluminum thin films on silicon. The treatment, performed as a final processing step prior to device packaging, starts by conformally removing the native metal oxide and fabrication residues from the exposed surfaces through ALE, before in situ encapsulating the metal surfaces with a thin dielectric layer using ALD. We measure a 2-fold reduction in loss attributed to two-level system (TLS) absorption in treated aluminum-based resonators and planar transmon qubits. Treated transmons with compact capacitor plates and gaps achieve median transmon quality factor ( Q ) and transmon qubit energy relaxation time ( T 1 ) values of 3.69 ± 0.42 × 10 6 and 196 ± 22 μs, respectively. These improvements were found to be sustained over several months. We discuss how the combination of ALE and ALD reverses fabrication-induced surface damage to significantly and durably improve device performance via a reduction of the TLS defect density in the capacitive elements.

arXiv:2506.17474•ACS Nano•Nov 20, 2025•10 citations

Material and Interface Engineering Strategies to Mitigate Decoherence in Superconducting Qubits

Dominic P. Goronzy, Anthony McFadden, David A. Garcia Wetten +16 more

While significant strides have been made to increase the coherence time of superconducting qubits, further advancements are essential for realizing scalable quantum computing. Decoherence is often a result of loss and noise stemming from two-level systems and excess quasiparticles, arising due to material defects, fabrication processes, and ambient exposure, particularly at surfaces and interfaces. Our recent efforts to mitigate these decoherence mechanisms have employed a variety of strategies, including low-loss surface encapsulation materials, advanced substrate preparation techniques, modifications to metal film growth, and the development of novel fabrication processes. The structural and chemical properties of materials, surfaces, and interfaces are studied using scanning probe microscopy, electron microscopy, photoelectron spectroscopy, mass spectrometry, and X-ray diffraction, which is correlated to device performance metrics, including superconducting resonator internal quality factor and qubit T1 time. This information is used to identify and understand material sources of loss and their origins in the device fabrication process. Through multi-institution efforts within SQMS we have identified the loss mechanism of interstitial hydrogen in niobium-based devices and shown how standard fabrication processes introduce these hydrides, developing strategies to mitigate their formation.1 Furthermore, we have characterized the metal-substrate interface, including the loss of niobium-silicides formed at that interface, and developed silicon surface treatments that reduce atomic scale roughness and oxygen content at the metal-substrate and Josephson junction interfaces.2-4 By developing the connection between materials properties and the overall performance of superconducting quantum circuitry, we can develop fabrication strategies to mitigate material losses, thus supporting the ongoing efforts to enhance coherence time in superconducting quantum devices. 1. Torres-Castanedo, C. G.*, Goronzy, D. P.*, et al., Adv. Funct. Mater., 2401365 (2024) 2. Lu, X., et al., Phys. Rev. Materials 6, 064402 (2022) 3. Berti, G., Appl. Phys. Lett. 122, 192605 (2023) 4. Kopas, C. J., Goronzy, D. P., et al., arXiv:2408.02863 (2024)

•Sep 23, 2024•0 citations

Resist-free shadow deposition using silicon trenches for Josephson junctions in superconducting qubits

Tathagata Banerjee, Stephen Daniel Funni, Saswata Roy +2 more

Superconducting qubit fabrication innovations continue to be explored to achieve higher performance. Despite improvements to base layer fabrication and processing, resist-based Josephson junction (JJ) schemes have largely remained unchanged. The polymer mask during deposition causes chemical contamination and limits in situ and ex situ surface preparation, junction materials, and scalability. Here, we demonstrate a resist-free approach to junction fabrication based on etched silicon trenches that is CMOS compatible and easily integrated into existing innovations in qubit base layer fabrication and chemical processing. We fabricate Al-AlOx-Al JJs and qubits using this method, measuring median energy relaxation times up to 184 microseconds. We find minimal contamination at the substrate-metal interface and fluctuations of energy relaxation on a 35 hour timescale that are narrow and normally distributed. The method widens the process window for substrate preparation and new materials platforms.

quant-pharXiv:2604.09796•Nano Letters•Apr 14, 2026•1 citation
Reducing materials and processing-induced decoherence is critical to the development of utility-scale quantum processors based on superconducting qubits. Here we report on the impact of two fluorine-based wet etches, which we use to treat the silicon surface underneath the Josephson junctions (JJs) of fixed-frequency transmon qubits made with aluminum base metallization. Using several materials analysis techniques, we demonstrate that these surface treatments can remove germanium residue introduced by our JJ fabrication with no other changes to the overall process flow. These surface treatments result in significantly improved energy relaxation times for the highest performing process, with median T1=334 μT_1=334~μT1​=334 μs, corresponding to quality factor Q=6.6×106Q=6.6\times10^6Q=6.6×106. This result suggests that the metal-substrate interface directly underneath the JJs was a major contributor to microwave loss in these transmon qubit circuits prior to integration of these surface treatments. Furthermore, this work illustrates how materials analysis can be used in conjunction with quantum device performance metrics to improve performance in superconducting qubits.
Abstract The performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. The dominant sources of these losses are believed to originate from amorphous materials and defects at interfaces and surfaces, likely as a result of fabrication processes or ambient exposure. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interfaces by replacing a buffered oxide etch (BOE) cleaning process with one that uses hydrofluoric acid followed by aqueous ammonium fluoride. We show that the ammonium fluoride etch process results in a statistically significant improvement in median T 1 by ∼ 22 % (p = 0.002), and a reduction in the number of strongly-coupled TLS in the tunable frequency range. Microwave resonator measurements on samples treated with the ammonium fluoride etch after niobium deposition and etching also show ∼ 33 % lower TLS-induced loss tangent compared to the BOE treated samples. As the chemical treatment primarily modifies the Josephson junction-substrate interface and substrate-air interface, we perform targeted chemical and structural characterizations to examine materials differences at these interfaces and identify multiple microscopic changes that could contribute to decreased TLS losses.
Fluxonium superconducting qubits have demonstrated long coherence times and high single- and two-qubit gate fidelities, making them a favorable building block for superconducting quantum processors. We investigate the dominant limitations to fluxonium qubit energy relaxation time T1T_1T1​ using a set of eight planar, aluminum-on-silicon qubits. We find that a circuit-based model for capacitive dielectric loss best captures the frequency dependence of T1T_1T1​, which we analyze within both a two-level and a six-level energy relaxation model. We convert the measured T1T_1T1​ into an effective capacitive quality factor QCeffQ_\mathrm{C}^{\mathrm{eff}}QCeff​ to compare qubits on equal footing, accounting for independently estimated contributions from 1/f1/f1/f flux noise and radiative loss to the control and readout circuitry. We apply this methodology to compare qubits from two fabrication processes: a baseline process and one that applies a fluorine-based wet treatment prior to Josephson junction deposition. We resolve a small improvement of (13.8 ±\pm± 8.4)%)\%)% in the process mean QCeffQ_\mathrm{C}^{\mathrm{eff}}QCeff​, indicating that the fluorine treatment may have reduced loss from the metal-substrate interface, but did not address the primary source of loss in these fluxonium qubits.
Aluminum (Al) remains the central material for superconducting qubits, and considerable effort has been devoted to optimizing its deposition and patterning for quantum devices. However, post-processing strategies focused on oxide removal of niobium (Nb) and tantalum (Ta) -based resonators using buffered oxide etch (BOE), which can not be used for Al. This challenge becomes particularly relevant for industry-scale fabrication with multi-chip bonding, where delays between sample preparation and cooldown require surface treatments that preserve low dielectric loss during extended exposure to ambient conditions. In this work, we investigate surface modification approaches for Al resonators subjected to a 24-hour delay prior to cryogenic measurement. Passivation using self-limiting oxygen and fluorine chemistries was evaluated utilizing different plasma processes. Remote oxygen plasma treatment reduced dielectric losses, in contrast to direct oxygen plasma. A fluorine-based plasma process was developed that passivated the Al surface for subsequent BOE treatment. However, the fluorine content in the surface resulted in higher loss, identifying fluorine as an unsuitable passivation material for Al resonators. Above all, selective oxide removal using HF (hydrogen fluoride) vapor and phosphoric acid yielded median dielectric losses as low as δ~LP=5.7×10−7\tildeδ_\mathrm{LP} = 5.7 \times 10^{-7}δ~LP​=5.7×10−7 (QLP≈1.7 MQ_\mathrm{LP} \approx 1.7\,\mathrm{M}QLP​≈1.7M) with δ~TLS=3.6×10−7\tildeδ_\mathrm{TLS} = 3.6 \times 10^{-7}δ~TLS​=3.6×10−7 (QTLS≈2.8 MQ_\mathrm{TLS} \approx 2.8\,\mathrm{M}QTLS​≈2.8M) in the single photon regime. Selective oxide removal provides a promising pathway for robust Al-based qubit fabrication, as it preserves low dielectric losses for a 24-hour delay before cooldown.
We present a dry surface treatment combining atomic layer etching and deposition (ALE and ALD) to mitigate dielectric loss in fully fabricated superconducting quantum devices formed from aluminum thin films on silicon. The treatment, performed as a final processing step prior to device packaging, starts by conformally removing the native metal oxide and fabrication residues from the exposed surfaces through ALE, before in situ encapsulating the metal surfaces with a thin dielectric layer using ALD. We measure a 2-fold reduction in loss attributed to two-level system (TLS) absorption in treated aluminum-based resonators and planar transmon qubits. Treated transmons with compact capacitor plates and gaps achieve median transmon quality factor ( Q ) and transmon qubit energy relaxation time ( T 1 ) values of 3.69 ± 0.42 × 10 6 and 196 ± 22 μs, respectively. These improvements were found to be sustained over several months. We discuss how the combination of ALE and ALD reverses fabrication-induced surface damage to significantly and durably improve device performance via a reduction of the TLS defect density in the capacitive elements.
While significant strides have been made to increase the coherence time of superconducting qubits, further advancements are essential for realizing scalable quantum computing. Decoherence is often a result of loss and noise stemming from two-level systems and excess quasiparticles, arising due to material defects, fabrication processes, and ambient exposure, particularly at surfaces and interfaces. Our recent efforts to mitigate these decoherence mechanisms have employed a variety of strategies, including low-loss surface encapsulation materials, advanced substrate preparation techniques, modifications to metal film growth, and the development of novel fabrication processes. The structural and chemical properties of materials, surfaces, and interfaces are studied using scanning probe microscopy, electron microscopy, photoelectron spectroscopy, mass spectrometry, and X-ray diffraction, which is correlated to device performance metrics, including superconducting resonator internal quality factor and qubit T1 time. This information is used to identify and understand material sources of loss and their origins in the device fabrication process. Through multi-institution efforts within SQMS we have identified the loss mechanism of interstitial hydrogen in niobium-based devices and shown how standard fabrication processes introduce these hydrides, developing strategies to mitigate their formation.1 Furthermore, we have characterized the metal-substrate interface, including the loss of niobium-silicides formed at that interface, and developed silicon surface treatments that reduce atomic scale roughness and oxygen content at the metal-substrate and Josephson junction interfaces.2-4 By developing the connection between materials properties and the overall performance of superconducting quantum circuitry, we can develop fabrication strategies to mitigate material losses, thus supporting the ongoing efforts to enhance coherence time in superconducting quantum devices. 1. Torres-Castanedo, C. G.*, Goronzy, D. P.*, et al., Adv. Funct. Mater., 2401365 (2024) 2. Lu, X., et al., Phys. Rev. Materials 6, 064402 (2022) 3. Berti, G., Appl. Phys. Lett. 122, 192605 (2023) 4. Kopas, C. J., Goronzy, D. P., et al., arXiv:2408.02863 (2024)
Superconducting qubit fabrication innovations continue to be explored to achieve higher performance. Despite improvements to base layer fabrication and processing, resist-based Josephson junction (JJ) schemes have largely remained unchanged. The polymer mask during deposition causes chemical contamination and limits in situ and ex situ surface preparation, junction materials, and scalability. Here, we demonstrate a resist-free approach to junction fabrication based on etched silicon trenches that is CMOS compatible and easily integrated into existing innovations in qubit base layer fabrication and chemical processing. We fabricate Al-AlOx-Al JJs and qubits using this method, measuring median energy relaxation times up to 184 microseconds. We find minimal contamination at the substrate-metal interface and fluctuations of energy relaxation on a 35 hour timescale that are narrow and normally distributed. The method widens the process window for substrate preparation and new materials platforms.