Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.07082 · Nature Communications

Asymmetric two-photon response of an incoherently driven quantum emitter

Lennart Jehle, L. M. Hansen, Patrik Isene Sund, Thomas Wilkens Sandø, Raphael Joos, Michael Jetter, Simone Luca Portalupi, Mathieu Bozzio, Peter Michler, Philip John Walther

Published May 9, 2026• 3 citations
arXivHTMLPDF

Abstract

Quantum emitters promise to emit exactly one photon when pumped by a laser pulse. However, even in ideal systems, re-excitation during the laser pulse duration causes the consecutive emission of two photons, thus limiting the single-photon purity. Although the probability and characteristics of re-excitation are largely determined by the excitation scheme, until now, only resonant driving has been studied. Here, we demonstrate qualitative differences for phonon-assisted excitation and resolve the distinct temporal and spectral profile of each of the photons. These uncover correlations between the emission time and wavelength, resulting in an asymmetric two-photon spectrum. On a fundamental level, we show that this spectrum provides direct access to the Rabi frequency of an incoherently driven quantum dot. On the application side, we leverage the asymmetry to selectively suppress multiphoton noise, ensuring high single-photon purity regardless of the laser pulse length and thus enhancing implementations across quantum cryptography and quantum computing.

DOI
10.1038/s41467-026-72706-z

Related papers

Emission-Frequency Separated High Quality Single-Photon Sources Enabled by Phonons

M. Cosacchi, F. Ungar, Moritz Cygorek +2 more

We demonstrate theoretically that the single-photon purity of photons emitted from a quantum dot exciton prepared by phonon-assisted off-resonant excitation can be significantly higher in a wide range of parameters than that obtained by resonant preparation for otherwise identical conditions. Despite the off-resonant excitation, the brightness stays on a high level. These surprising findings exploit the fact that the phonon-assisted preparation is a two-step process where phonons first lead to a relaxation between laser-dressed states while high exciton occupations are reached only with a delay to the laser pulse maximum by adiabatically undressing the dot states. Due to this delay, possible subsequent processes, in particular multiphoton excitations, appear at a time when the laser pulse is almost gone. The resulting suppression of reexcitation processes increases the single-photon purity. Due to the spectral separation of the signal photons from the laser frequencies this enables the emission of high quality single photons not disturbed by a laser background while taking advantage of the robustness of the phonon assisted scheme.

arXiv:1902.06132•Physical Review Letters•Jul 3, 2019•61 citations

Generation of single-photon and two-photon pulses from a quantum two-level system (Conference Presentation)

Lukas Hanschke, Kevin A. Fischer, Jakob Wierzbowski +10 more

Due to their excellent optical properties, quantum dots are promising for applications in photonic quantum technologies. For on-demand single-photon generation, a two-level system given by an excitonic transition is typically excited with a resonant laser pulse of area π. This prepares the two-level system in its excited state from where it spontaneously emits a single photon. However, emission that occurs already during the presence of the laser pulse allows for re-excitation and, thus, multi-photon emission which limits the single-photon purity [1]. In contrast, when exciting the system with a pulse of area 2π, the system is expected to be returned to the ground state. However, in this case emission during the presence of the pulse is most likely to occur when the system is in its excited state – exactly after an area of π has been absorbed. This restarts the Rabi oscillation with a pulse area of π remaining in the pulse which leads to re-excitation with near-unity probability and the emission of a second photon within the excited state lifetime [2,3]. Finally, we present the generation of single photons with ultra-low multi-photon probability [4]. Using two-photon excitation of the bi-exciton suppresses re-excitation and improves the single photon purity by several orders of magnitude for short pulses. [1] K. A. Fischer, et al., New J. Phys. 18, 113053 (2016) [2] K. A. Fischer, et al., Nature Physics 13, 649-654 (2017) [3] K. A. Fischer, et al., Quantum Sci. Technol. 3, 014006 (2017) [4] L. Hanschke et al., arxiv: 1801.01672 (2018)

Ultrafast Phenomena and Nanophotonics•Mar 5, 2019•0 citations

Resonantly driven coherent oscillations in a solid-state quantum emitter

Edward B. Flagg, Andreas Müller, John W. Robertson +6 more

Two experiments observe the so-called Mollow triplet in the emission spectrum of a quantum dot—originating from resonantly driving a dot transition—and demonstrate the potential of these systems to act as single-photon sources, and as a readout modality for electron-spin states. Single-quantum emitters emit only one photon at a time1,2, but the properties of the photon depend on how the emitter is excited3. Incoherent excitation is simple and broadly used with solid-state emitters such as quantum dots, but does not allow direct manipulation of the quantum state. Coherent, resonant excitation on the other hand is used in pump–probe techniques to examine the quantum state of the emitter4, but does not permit collection of the single-photon emission. Coherent control with simultaneous generation of photons has been an elusive goal in solid-state approaches, where, because of strong laser scattering at the detection wavelength, measurement of resonant emission has been limited to cross-polarized detection5 or Stokes-shift techniques6,7. Here we demonstrate that a semiconductor quantum dot in a microcavity can be resonantly driven and its single-photon emission extracted background free. Under strong continuous-wave excitation, the dot undergoes several Rabi oscillations before emitting, which are visible as oscillations in the second-order correlation function. The quantum-dot states are therefore ‘dressed’, resulting in a Mollow-triplet emission spectrum. Such coherent control will be necessary for future high-efficiency sources of indistinguishable single photons3,8, which can be used for quantum key distribution9 or through post-selection10 to generate entangled photon pairs11,12.

Bulletin of the American Physical Society•Mar 19, 2010•0 citations

Selective filtering of multi-photon events from a single-photon emitter

Friedrich Sbresny, Carolin Calcagno, Sang Kyu Kim +7 more

Single-photon purity is one of the most important key metrics of many quantum states of light. For applications in photonic quantum technologies, e.g. quantum communication and linear optical quantum computing, a minimization of the multi-photon error rate is required because of its error-introducing nature. Ultimately, the purity of state-of-the-art single-photon sources was found to be limited by spontaneous emission and subsequent reexcitation during the interaction with the driving field. Here, we demonstrate that even this fundamental limit to the single-photon purity can be overcome due to the distinct spectro-temporal properties of the individual photons forming multi-photon errors. For driving pulses shorter than the emitter lifetime, we find that photons emitted during the pulse exhibit a significantly broader spectral shape than the emitter's natural linewidth. Thus, we can selectively filter out the majority of this instantaneously emitted photon by employing narrowband spectral filters, which reduces the measured degree of second-order coherence at zero time delay by almost one order of magnitude. This enables a significant suppression of the multi-photon error rate without detrimental effects on the desired single-photon emission.

arXiv:2506.22378•Nature Communications•Aug 14, 2026•2 citations

High-quality single photons from cavity-enhanced biexciton-to-exciton transition

Nils Heinisch, Francesco Salusti, Mark R. Hogg +7 more

Resonant laser excitation of a two-level system with subsequent single-photon emission can be used to generate single photons with high indistinguishability or Hong-Ou-Mandel (HOM) visibility. However, spectral overlap between excitation laser and emitted photons generally poses significant challenges. Furthermore, emitter re-excitation intrinsically limits achievable single-photon purity. Established solutions mitigate these issues at significant cost to source efficiency and with increased source complexity. This motivates the use of few-level systems with spectral separation of excitation and emission pathways. One option is a three-level cascade. However, without targeted lifetime engineering of emitting states, the cascade naturally limits achievable photon indistinguishability. Here we study a semiconductor quantum dot with resonant and selective cavity-enhancement of biexciton-to-exciton transition. Following resonant two-photon excitation of the biexciton state, we collect the emitted single photon with the cavity. This approach circumvents emitter re-excitation and naturally introduces spectral separation of excitation laser and emitted single photon. Supported by first experimental results, we demonstrate theoretically that with selective Purcell enhancement, the observed quality quantifiers of single-photon emission (purity, equivalently $g^{(2)}(0)$, and HOM visibility $\mathcal{V}$, equivalently indistinguishability) are competitive with respect to high-quality deterministic quantum-dot single-photon sources. This is already achieved without systematic optimization or targeted system engineering, which firmly places the reported approach as a viable route to the next generation of highest-quality quantum-dot based deterministic single-photon sources.

quant-pharXiv:2602.18153•Physical Review Applied•Feb 23, 2026•2 citations

Generation of "triggered single photons" from a coherently-pumped quantum dot

Pradyumna K. Pathak, Stephen Hughes

A deterministic "on demand" source of single photons is a basic building block for linear quantum computation \cite{linear}, quantum cryptography \cite{crypto}, quantum teleportation \cite{teleport}, and quantum networks \cite{network}. In all these applications, quantum interference between two single-photon pulses on a symmetric beam splitter has been exploited \cite{review}, which imposes stringent requirement for the implemented single photons to be indistinguishable in all degrees of freedom, including their frequencies, spectral widths, pulse shapes, and polarizations. To generate single photons one requires a pumping mechanism to excite a "two-level emitter" and an efficient channeling of the subsequently emitted photons. The efficiency of the source can be enhanced by coupling the emitter to the waveguide \cite{manga} or a microcavity mode \cite{cklaw}. However, hitherto the solid-state single photon sources realized by using a quantum dot coupled with a microcavity rely on incoherent pumping of excitons, which leads to problems with timing jitter \cite{kiraz}, leading to a trade off between efficiency and indistinguishability. Here we introduce a means to realize a highly efficient solid state source of indistinguishable single photons using cavity-assisted adiabatic Raman passage in a single quantum dot - cavity system. We demonstrate pulse-triggered single photons with 100% efficiency and $>90$% indistinguishability using currently available experimental parameters.

arXiv:0911.5673•Nov 30, 2009•0 citations
Quantum emitters promise to emit exactly one photon when pumped by a laser pulse. However, even in ideal systems, re-excitation during the laser pulse duration causes the consecutive emission of two photons, thus limiting the single-photon purity. Although the probability and characteristics of re-excitation are largely determined by the excitation scheme, until now, only resonant driving has been studied. Here, we demonstrate qualitative differences for phonon-assisted excitation and resolve the distinct temporal and spectral profile of each of the photons. These uncover correlations between the emission time and wavelength, resulting in an asymmetric two-photon spectrum. On a fundamental level, we show that this spectrum provides direct access to the Rabi frequency of an incoherently driven quantum dot. On the application side, we leverage the asymmetry to selectively suppress multiphoton noise, ensuring high single-photon purity regardless of the laser pulse length and thus enhancing implementations across quantum cryptography and quantum computing.
We demonstrate theoretically that the single-photon purity of photons emitted from a quantum dot exciton prepared by phonon-assisted off-resonant excitation can be significantly higher in a wide range of parameters than that obtained by resonant preparation for otherwise identical conditions. Despite the off-resonant excitation, the brightness stays on a high level. These surprising findings exploit the fact that the phonon-assisted preparation is a two-step process where phonons first lead to a relaxation between laser-dressed states while high exciton occupations are reached only with a delay to the laser pulse maximum by adiabatically undressing the dot states. Due to this delay, possible subsequent processes, in particular multiphoton excitations, appear at a time when the laser pulse is almost gone. The resulting suppression of reexcitation processes increases the single-photon purity. Due to the spectral separation of the signal photons from the laser frequencies this enables the emission of high quality single photons not disturbed by a laser background while taking advantage of the robustness of the phonon assisted scheme.
Due to their excellent optical properties, quantum dots are promising for applications in photonic quantum technologies. For on-demand single-photon generation, a two-level system given by an excitonic transition is typically excited with a resonant laser pulse of area π. This prepares the two-level system in its excited state from where it spontaneously emits a single photon. However, emission that occurs already during the presence of the laser pulse allows for re-excitation and, thus, multi-photon emission which limits the single-photon purity [1]. In contrast, when exciting the system with a pulse of area 2π, the system is expected to be returned to the ground state. However, in this case emission during the presence of the pulse is most likely to occur when the system is in its excited state – exactly after an area of π has been absorbed. This restarts the Rabi oscillation with a pulse area of π remaining in the pulse which leads to re-excitation with near-unity probability and the emission of a second photon within the excited state lifetime [2,3]. Finally, we present the generation of single photons with ultra-low multi-photon probability [4]. Using two-photon excitation of the bi-exciton suppresses re-excitation and improves the single photon purity by several orders of magnitude for short pulses. [1] K. A. Fischer, et al., New J. Phys. 18, 113053 (2016) [2] K. A. Fischer, et al., Nature Physics 13, 649-654 (2017) [3] K. A. Fischer, et al., Quantum Sci. Technol. 3, 014006 (2017) [4] L. Hanschke et al., arxiv: 1801.01672 (2018)
Two experiments observe the so-called Mollow triplet in the emission spectrum of a quantum dot—originating from resonantly driving a dot transition—and demonstrate the potential of these systems to act as single-photon sources, and as a readout modality for electron-spin states. Single-quantum emitters emit only one photon at a time1,2, but the properties of the photon depend on how the emitter is excited3. Incoherent excitation is simple and broadly used with solid-state emitters such as quantum dots, but does not allow direct manipulation of the quantum state. Coherent, resonant excitation on the other hand is used in pump–probe techniques to examine the quantum state of the emitter4, but does not permit collection of the single-photon emission. Coherent control with simultaneous generation of photons has been an elusive goal in solid-state approaches, where, because of strong laser scattering at the detection wavelength, measurement of resonant emission has been limited to cross-polarized detection5 or Stokes-shift techniques6,7. Here we demonstrate that a semiconductor quantum dot in a microcavity can be resonantly driven and its single-photon emission extracted background free. Under strong continuous-wave excitation, the dot undergoes several Rabi oscillations before emitting, which are visible as oscillations in the second-order correlation function. The quantum-dot states are therefore ‘dressed’, resulting in a Mollow-triplet emission spectrum. Such coherent control will be necessary for future high-efficiency sources of indistinguishable single photons3,8, which can be used for quantum key distribution9 or through post-selection10 to generate entangled photon pairs11,12.
Single-photon purity is one of the most important key metrics of many quantum states of light. For applications in photonic quantum technologies, e.g. quantum communication and linear optical quantum computing, a minimization of the multi-photon error rate is required because of its error-introducing nature. Ultimately, the purity of state-of-the-art single-photon sources was found to be limited by spontaneous emission and subsequent reexcitation during the interaction with the driving field. Here, we demonstrate that even this fundamental limit to the single-photon purity can be overcome due to the distinct spectro-temporal properties of the individual photons forming multi-photon errors. For driving pulses shorter than the emitter lifetime, we find that photons emitted during the pulse exhibit a significantly broader spectral shape than the emitter's natural linewidth. Thus, we can selectively filter out the majority of this instantaneously emitted photon by employing narrowband spectral filters, which reduces the measured degree of second-order coherence at zero time delay by almost one order of magnitude. This enables a significant suppression of the multi-photon error rate without detrimental effects on the desired single-photon emission.
Resonant laser excitation of a two-level system with subsequent single-photon emission can be used to generate single photons with high indistinguishability or Hong-Ou-Mandel (HOM) visibility. However, spectral overlap between excitation laser and emitted photons generally poses significant challenges. Furthermore, emitter re-excitation intrinsically limits achievable single-photon purity. Established solutions mitigate these issues at significant cost to source efficiency and with increased source complexity. This motivates the use of few-level systems with spectral separation of excitation and emission pathways. One option is a three-level cascade. However, without targeted lifetime engineering of emitting states, the cascade naturally limits achievable photon indistinguishability. Here we study a semiconductor quantum dot with resonant and selective cavity-enhancement of biexciton-to-exciton transition. Following resonant two-photon excitation of the biexciton state, we collect the emitted single photon with the cavity. This approach circumvents emitter re-excitation and naturally introduces spectral separation of excitation laser and emitted single photon. Supported by first experimental results, we demonstrate theoretically that with selective Purcell enhancement, the observed quality quantifiers of single-photon emission (purity, equivalently g(2)(0)g^{(2)}(0)g(2)(0), and HOM visibility V\mathcal{V}V, equivalently indistinguishability) are competitive with respect to high-quality deterministic quantum-dot single-photon sources. This is already achieved without systematic optimization or targeted system engineering, which firmly places the reported approach as a viable route to the next generation of highest-quality quantum-dot based deterministic single-photon sources.
A deterministic "on demand" source of single photons is a basic building block for linear quantum computation \cite{linear}, quantum cryptography \cite{crypto}, quantum teleportation \cite{teleport}, and quantum networks \cite{network}. In all these applications, quantum interference between two single-photon pulses on a symmetric beam splitter has been exploited \cite{review}, which imposes stringent requirement for the implemented single photons to be indistinguishable in all degrees of freedom, including their frequencies, spectral widths, pulse shapes, and polarizations. To generate single photons one requires a pumping mechanism to excite a "two-level emitter" and an efficient channeling of the subsequently emitted photons. The efficiency of the source can be enhanced by coupling the emitter to the waveguide \cite{manga} or a microcavity mode \cite{cklaw}. However, hitherto the solid-state single photon sources realized by using a quantum dot coupled with a microcavity rely on incoherent pumping of excitons, which leads to problems with timing jitter \cite{kiraz}, leading to a trade off between efficiency and indistinguishability. Here we introduce a means to realize a highly efficient solid state source of indistinguishable single photons using cavity-assisted adiabatic Raman passage in a single quantum dot - cavity system. We demonstrate pulse-triggered single photons with 100% efficiency and >90>90>90% indistinguishability using currently available experimental parameters.