The RYDberg Atomic Receiver (RYDAR) has been demonstrated to surmount the limitation on both the sensitivity and operating bandwidth of the classical electronic counterpart, which can theoretically detect indiscernible electric signals below -174 dBm/Hz with optical measurement through Rydberg-state atoms. Such miracle has established a new quantum-based paradigm for communications and sensing, which motivates a revolution of the transceiver design philosophies to fully unleash the potential of RYDAR towards next-generation networks. Against this background, this article provides an extensive investigation of Rydberg atomic communications and sensing from theory to hardware implementations. Specifically, we highlight the great opportunities from the hybridization between the RYDAR and the cutting- edge integrated sensing and communication (ISAC), followed by essential preliminaries of the quantum-based receiver. Then we propose a theoretical framework for broadband ISAC based on RYDAR, demonstrated by the proof-of-concept experiments. Afterwards, the enabling technologies for the ISAC framework are explored ranging from channel characterization, waveform design to array-based receiver configurations, where the open problems are also summarized. Finally, the future applications of RYDAR-based ISAC are envisioned, indicating its significant potential for both civilian and military purposes.
The RYDberg Atomic Receiver (RYDAR) has been demonstrated to surmount the limitation on both the sensitivity and operating bandwidth of the classical electronic counterpart, which can theoretically detect indiscernible electric signals below -174 dBm/Hz with optical measurement through Rydberg-state atoms. Such miracle has established a new quantum-based paradigm for communications and sensing, which motivates a revolution of the transceiver design philosophies to fully unleash the potential of RYDAR towards next-generation networks. Against this background, this article provides an extensive investigation of Rydberg atomic communications and sensing from theory to hardware implementations. Specifically, we highlight the great opportunities from the hybridization between the RYDAR and the cutting- edge integrated sensing and communication (ISAC), followed by essential preliminaries of the quantum-based receiver. Then we propose a theoretical framework for broadband ISAC based on RYDAR, demonstrated by the proof-of-concept experiments. Afterwards, the enabling technologies for the ISAC framework are explored ranging from channel characterization, waveform design to array-based receiver configurations, where the open problems are also summarized. Finally, the future applications of RYDAR-based ISAC are envisioned, indicating its significant potential for both civilian and military purposes.
As a key enabler for next-generation wireless systems, integrated sensing and communication (ISAC) requires significantly higher receiver sensitivity than conventional architectures to achieve long-range target detection, thereby introducing new challenges in receiver design. Among potential solutions, Rydberg atomic quantum receivers (RAQRs) have attracted growing attention for their unique quantum sensing capabilities. By exploiting the exceptional responsiveness of Rydberg atoms to electromagnetic fields, RAQRs enable direct and highly sensitive measurement of radio-frequency (RF) signals without relying on traditional antenna-based front ends. However, this enhanced sensitivity also renders them more vulnerable to interference, particularly from undesired targets and long-delay multipath components. To address this limitation, this article presents practical strategies for improving the interference robustness and selective reception performance of RAQRs in ISAC scenarios. Specifically, we begin with a comprehensive overview of RAQR principles and identify the interference-related challenges encountered in ISAC applications. Building on this foundation, we introduce the Actively Selective RAQR (AS-RAQR) architecture, which integrates tunable gating mechanisms to actively suppress unwanted signals. The proposed design is validated through representative case studies, followed by a discussion of open challenges and future research directions.
With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
Integrated sensing and communications (ISAC) demands front-ends that natively support coherent data reception and accurate environmental awareness within a single hardware chain. We present a quantum ISAC receiver that replaces the conventional RF antenna–mixer–LNA cascade with a centimeterscale Rydberg-atom vapor cell, enabling quantum-traceable RF-to-optical I/Q downconversion. Using electromagnetically induced transparency (EIT) and Autler–Townes (AT) physics, the receiver provides a phase-accurate baseband suitable for standard coherent communications, while reusing the same front-end for range sensing via pilot-aided stepped tones. A hybrid tuning strategy—coarse laser-controlled state hopping with fine AC-Stark compensation—realizes non-uniform stepped coverage across 2.6–3.6 GHz. A compact prototype demonstrates centimeter-level range sensing (RMSE = 1.06 cm within 1.6–1.9 m) and resolves 15 cm separations in controlled sparse cases, while preserving stable phase tracking required by coherent demodulation. These results indicate a practical pathway to compact, calibration-free ISAC nodes with simplified RF hardware, where communications pilots can be opportunistically reused for accurate sensing.
Rydberg Atomic REceiver (RARE) is driving a paradigm shift in electromagnetic wave measurement by harnessing the electron transition phenomenon of Rydberg atoms. Operating at the quantum scale, such receivers have the potential to breakthrough the performance limit of classic receivers, sparking a revolution in physical-layer wireless communications. The objective of this article is to offer insights into RARE-empowered communication systems. We first provide a comprehensive introduction to the fundamental principles of RAREs. Then, a thorough comparison between RAREs and classic receivers is conducted in terms of the antenna size, sensitivity, and bandwidth. Subsequently, we overview the recent progresses in RARE-aided wireless communications, covering the frequency-division multiplexing, multiple- input-multiple-output, wireless sensing, and quantum many-body techniques. Moreover, the unique application of RARE in multi-band communication and sensing is unveiled, followed by numerical experiments to show its performance superiority over classic receivers by ~2.4 bps/ Hz in spectrum efficiency and ~7.2 dB in sensing accuracy. Finally, we conclude this article by providing promising research directions.
Rydberg atomic quantum receivers (RAQRs) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on the creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on atom-light interactions relying on the so-called electromagnetically induced transparency (EIT) and Autler- Townes splitting (ATS) so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states facilitate an ultra-high sensitivity (~nv⁄cm/√Hz) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple- output (RAQ-MIMO) schemes to facilitate the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.
To address the challenges of ultra-long-distance transmission in space-air-ground integrated networks (SAGIN), the Rydberg atomic receiver (RYDAR) has emerged as a promising alternative to classical electric counterparts for communications and sensing, offering unprecedented sensitivity across the entire electromagnetic spectrum. In this paper, we introduce a novel homodyne RYDAR architecture without frequency scanning for instantaneous bandwidth enhancement, and propose a theoretical model for hybrid noise components that incorporates photon shot noise, quantum projection noise, and environmental background noise. The proposed design preserves bit error rate (BER) performance while substantially reducing computational complexity. Simulation results show that the proposed detector achieves up to 2 dB performance gain at a BER of 10−3compared with conventional methods, while maintaining low computational complexity under hybrid noise conditions. These results establish an architectural foundation with strong potential for quantum-enhanced wireless reception in future 6G systems.