Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.12989

The impact of parameter spread of high-temperature superconducting Josephson junctions on the performance of quantum-based voltage standards

Wen, Guanghong, Zhu, Yi, Zheng, Yingxiang, Cui, Shuhe, Wang, Ji, Yanyun Ren, Hao Li, Zhang, Guofeng, Lixing You

Published Jun 15, 2025• 0 citations
arXivHTMLPDF

Abstract

Quantum metrology based on Josephson junction array reproduces the most accurate desired voltage by far, therefore being introduced to provide voltage standards worldwide. In this work, we quantitatively analyzed the dependence of the first Shapiro step height of the junction array at 50 GHz on the parameter spread of 10,000 Josephson junctions by numerical simulation with resistively shunted junction model. The results indicate an upper limit spread of the critical current and resistance of the Josephson junctions. Specifically, to keep the maximum first Shapiro step above 0.88 mA, the critical current standard deviation, $σ$, should not exceed 25%, and for it to stay above 0.6 mA, the resistance standard deviation should not exceed 1.5%.

DOI
10.48550/arxiv.2506.12989

Related papers

The impact of parameter spreads of Josephson junctions on the performance of quantum-based voltage standards

Guanghong Wen, Yi Zhu, Y. Zheng +4 more

Quantum metrology based on a Josephson junction array reproduces the most accurate desired voltage by far, therefore being introduced to provide voltage standards worldwide. In this work, we quantitatively analyzed the dependence of the first Shapiro step height of the junction array at 70 GHz on the parameter spread of 8000 Josephson junctions with an average critical current ( I c ) of 3.5 mA and an average normal state resistance ( R n ) of 40 m Ω , using numerical simulations based on the resistively shunted junction (RSJ) model. The results indicate an upper limit spread of the I c and R n of the Josephson junctions. Specifically, to keep the maximum first Shapiro step above 0.9 mA, the I c standard deviation, σ , should not exceed 25%, and for it to stay above 0.5 mA, the R n deviation should not exceed 9%. This analysis specifically clarifies the required level of manufacturing process sophistication for superconducting devices to realize high-temperature superconducting (HTS) quantum-based voltage standards.

Physica C Superconductivity•Aug 19, 2026•0 citations

Numerical analysis of Josephson junction arrays for multi-order quantum voltage steps

Paolo Durandetto

Abstract The dynamics of overdamped Josephson junctions under varying microwave-driving conditions have been studied through numerical simulations using the resistively-shunted junction model, with a focus on primary voltage metrology applications, where a significantly high number of series-connected junctions and stringent uniformity of their electrical parameters are required. The aim is to determine the optimal junction characteristics and external microwave (rf) parameters that maximize the width of quantum voltage levels (Shapiro steps) from order n = 0 to n > 1. Both the rf and dc power requirements, along with the junction parameter spread and power attenuation, are analyzed as key factors that need to be optimized for improved performance of the quantum device. This work aims to advance the development of next-generation programmable Josephson voltage standards with logic architectures that surpass the conventional binary and ternary codifications used in present quantum voltage arrays, while significantly reducing the overall number of junctions as well as the number of sub-arrays and bias lines. Existing technologies exploiting n = 0 and n = ± 1 voltage steps are first discussed and analyzed to verify the validity of the simulation model. They are then further investigated to extend their usability with multi-order quantum steps for n up to 3. From the simulation results, it follows that present junction technologies may be employed with no modifications for the simultaneous operation of quantum steps up to n = 2, although optimal power efficiency would require a retrimming of the junction’s electrical parameters. On the contrary, extending the highest step order to n = 3 strictly requires the junction’s characteristic parameters to be properly adjusted to maintain sustainable power levels as well as acceptable quantum-locking ranges.

arXiv:2410.07835•Superconductor Science and Technology•May 20, 2025•1 citation

Large constant voltage generated with a single array including 65 536 Nb/TiN/Nb Josephson junctions

Hirotake Yamamori, Chiharu Urano, Michitaka Maruyama +2 more

A 2 V Shapiro step with a current height of about 0.3 mA was successfully generated at 4.2 K with a single array including 65 536 Nb/TiN/Nb Josephson junctions under microwave irradiation at 16 GHz. The critical current density was 89 kA cm − 2 , and the junction size was 3 µm. The n = 1 step height decreased exponentially as the number of junctions N increased when the number of junctions was less than 30 000, a result that agreed well with the dissipated junction model. On the other hand, the step height was nearly constant when the number of junctions was more than about 30 000, a figure much larger than that theoretically calculated from the model. Using an array including such a large number of Josephson junctions represents a promising way for ac waveform synthesis to increase output voltage to about 1 V rms .

Superconductor Science and Technology•Jun 16, 2010•5 citations

Feasibility of the Josephson voltage and current standards on a single chip

Rais S. Shaikhaidarov, Ilya Antonov, Kyung Ho Kim +5 more

The quantum Josephson voltage standard is well established across the metrology community for many years. It relies on the synchronization of the flux tunneling in the S/I/S Josephson junctions (JJ) with the microwave radiation (MW) of frequency f such that V=Φ0fm, where m = 0, 1, 2, …. The phenomenon is called the Shapiro steps. Together with the quantum Hall resistance standard, the voltage standard forms the foundation of electrostatic metrology. The current is then defined as the ratio of the voltage and resistance. Realization of the quantum current standard would close the electrostatic metrological triangle of voltage–resistance–current. The current quantization I=2efm, the inverse Shapiro steps, was recently shown using the superconducting nanowires and small JJ. The effect is a synchronization of the MW with the Cooper pair tunneling. This paves the way to combine the JJ voltage and current standards on the same chip and demonstrate feasibility of the multi-standard operation. We show the voltage and current quantization on the same chip up to frequency of 10 GHz, corresponding to the amplitudes ∼ 20.67 μV and ∼ 3.2 nA, respectively. The accuracy of the voltage and current quantization, however, is relatively low, 35 and 100 ppk, respectively. We discuss measures to optimize the JJs, circuit, and environment to boost the amplitude and accuracy of the standards.

arXiv:2410.11018•Applied Physics Letters•Sep 16, 2024•7 citations

Terahertz Shapiro steps in high temperature SNS Josephson junctions

Peter A. Rosenthal, Erich N. Grossman

We have studied the far infrared behavior of high -T/sub c/ superconductor-normal metal-superconductor (SNS) microbridges with T/sub c/>85 K and critical current-resistance products (I/sub c/R/sub N/) as high as 10 mV at 4 K. These are the highest I/sub c/R/sub N/ products reported to date for microfabricated Josephson junctions of any material. The junctions were integrated at the feeds of planar log-periodic antennas made from Au thin films. The junctions had dc normal state resistances R/sub N/ between 6 and 38 /spl Omega/, reasonably well matched to the antenna's estimated RF impedance of 53 /spl Omega/. Far infrared laser radiation at 404, 760, and 992 GHz induced distinct Shapiro steps (i.e. constant voltage steps at voltages n(hf/2e), n=1,2,...) in the current voltage characteristics as well as modulation of the critical current. Steps were observed at voltages up to 17 mV and 6 mV, at temperatures of 9 K and 57 K respectively. This corresponds to maximum Josephson oscillation frequencies of 8 and 3 THz at these temperatures. These are the first far infrared measurements performed on high T/sub c/ junctions. Measurements of the power, frequency, and temperature dependence of the Shapiro steps are presented and discussed in the context of a resistively and capacitively shunted junction (RCSJ) model. A value of 4.5 fF for the junction capacitance is inferred from the hysteresis of the slightly underdamped current-voltage characteristics.>

IEEE Transactions on Microwave Theory and Techniques•Apr 1, 1994•46 citations

Terahertz Shapiro Steps in High Temperature SNS Josephson Junctions

Peter A. Rosenthal, Erich N. Grossman

We have studied the far infrared behavior of high -T/sub c/ superconductor-normal metal-superconductor (SNS) microbridges with T/sub c/>85 K and critical current-resistance products (I/sub c/R/sub N/) as high as 10 mV at 4 K. These are the highest I/sub c/R/sub N/ products reported to date for microfabricated Josephson junctions of any material. The junctions were integrated at the feeds of planar log-periodic antennas made from Au thin films. The junctions had dc normal state resistances R/sub N/ between 6 and 38 /spl Omega/, reasonably well matched to the antenna's estimated RF impedance of 53 /spl Omega/. Far infrared laser radiation at 404, 760, and 992 GHz induced distinct Shapiro steps (i.e. constant voltage steps at voltages n(hf/2e), n=1,2,...) in the current voltage characteristics as well as modulation of the critical current. Steps were observed at voltages up to 17 mV and 6 mV, at temperatures of 9 K and 57 K respectively. This corresponds to maximum Josephson oscillation frequencies of 8 and 3 THz at these temperatures. These are the first far infrared measurements performed on high T/sub c/ junctions. Measurements of the power, frequency, and temperature dependence of the Shapiro steps are presented and discussed in the context of a resistively and capacitively shunted junction (RCSJ) model. A value of 4.5 fF for the junction capacitance is inferred from the hysteresis of the slightly underdamped current-voltage characteristics. >

Softwaretechnik-Trends•Apr 1, 1993•0 citations
Quantum metrology based on Josephson junction array reproduces the most accurate desired voltage by far, therefore being introduced to provide voltage standards worldwide. In this work, we quantitatively analyzed the dependence of the first Shapiro step height of the junction array at 50 GHz on the parameter spread of 10,000 Josephson junctions by numerical simulation with resistively shunted junction model. The results indicate an upper limit spread of the critical current and resistance of the Josephson junctions. Specifically, to keep the maximum first Shapiro step above 0.88 mA, the critical current standard deviation, σσσ, should not exceed 25%, and for it to stay above 0.6 mA, the resistance standard deviation should not exceed 1.5%.
Quantum metrology based on a Josephson junction array reproduces the most accurate desired voltage by far, therefore being introduced to provide voltage standards worldwide. In this work, we quantitatively analyzed the dependence of the first Shapiro step height of the junction array at 70 GHz on the parameter spread of 8000 Josephson junctions with an average critical current ( I c ) of 3.5 mA and an average normal state resistance ( R n ) of 40 m Ω , using numerical simulations based on the resistively shunted junction (RSJ) model. The results indicate an upper limit spread of the I c and R n of the Josephson junctions. Specifically, to keep the maximum first Shapiro step above 0.9 mA, the I c standard deviation, σ , should not exceed 25%, and for it to stay above 0.5 mA, the R n deviation should not exceed 9%. This analysis specifically clarifies the required level of manufacturing process sophistication for superconducting devices to realize high-temperature superconducting (HTS) quantum-based voltage standards.
Abstract The dynamics of overdamped Josephson junctions under varying microwave-driving conditions have been studied through numerical simulations using the resistively-shunted junction model, with a focus on primary voltage metrology applications, where a significantly high number of series-connected junctions and stringent uniformity of their electrical parameters are required. The aim is to determine the optimal junction characteristics and external microwave (rf) parameters that maximize the width of quantum voltage levels (Shapiro steps) from order n = 0 to n > 1. Both the rf and dc power requirements, along with the junction parameter spread and power attenuation, are analyzed as key factors that need to be optimized for improved performance of the quantum device. This work aims to advance the development of next-generation programmable Josephson voltage standards with logic architectures that surpass the conventional binary and ternary codifications used in present quantum voltage arrays, while significantly reducing the overall number of junctions as well as the number of sub-arrays and bias lines. Existing technologies exploiting n = 0 and n = ± 1 voltage steps are first discussed and analyzed to verify the validity of the simulation model. They are then further investigated to extend their usability with multi-order quantum steps for n up to 3. From the simulation results, it follows that present junction technologies may be employed with no modifications for the simultaneous operation of quantum steps up to n = 2, although optimal power efficiency would require a retrimming of the junction’s electrical parameters. On the contrary, extending the highest step order to n = 3 strictly requires the junction’s characteristic parameters to be properly adjusted to maintain sustainable power levels as well as acceptable quantum-locking ranges.
A 2 V Shapiro step with a current height of about 0.3 mA was successfully generated at 4.2 K with a single array including 65 536 Nb/TiN/Nb Josephson junctions under microwave irradiation at 16 GHz. The critical current density was 89 kA cm − 2 , and the junction size was 3 µm. The n = 1 step height decreased exponentially as the number of junctions N increased when the number of junctions was less than 30 000, a result that agreed well with the dissipated junction model. On the other hand, the step height was nearly constant when the number of junctions was more than about 30 000, a figure much larger than that theoretically calculated from the model. Using an array including such a large number of Josephson junctions represents a promising way for ac waveform synthesis to increase output voltage to about 1 V rms .
The quantum Josephson voltage standard is well established across the metrology community for many years. It relies on the synchronization of the flux tunneling in the S/I/S Josephson junctions (JJ) with the microwave radiation (MW) of frequency f such that V=Φ0fm, where m = 0, 1, 2, …. The phenomenon is called the Shapiro steps. Together with the quantum Hall resistance standard, the voltage standard forms the foundation of electrostatic metrology. The current is then defined as the ratio of the voltage and resistance. Realization of the quantum current standard would close the electrostatic metrological triangle of voltage–resistance–current. The current quantization I=2efm, the inverse Shapiro steps, was recently shown using the superconducting nanowires and small JJ. The effect is a synchronization of the MW with the Cooper pair tunneling. This paves the way to combine the JJ voltage and current standards on the same chip and demonstrate feasibility of the multi-standard operation. We show the voltage and current quantization on the same chip up to frequency of 10 GHz, corresponding to the amplitudes ∼ 20.67 μV and ∼ 3.2 nA, respectively. The accuracy of the voltage and current quantization, however, is relatively low, 35 and 100 ppk, respectively. We discuss measures to optimize the JJs, circuit, and environment to boost the amplitude and accuracy of the standards.
We have studied the far infrared behavior of high -T/sub c/ superconductor-normal metal-superconductor (SNS) microbridges with T/sub c/>85 K and critical current-resistance products (I/sub c/R/sub N/) as high as 10 mV at 4 K. These are the highest I/sub c/R/sub N/ products reported to date for microfabricated Josephson junctions of any material. The junctions were integrated at the feeds of planar log-periodic antennas made from Au thin films. The junctions had dc normal state resistances R/sub N/ between 6 and 38 /spl Omega/, reasonably well matched to the antenna's estimated RF impedance of 53 /spl Omega/. Far infrared laser radiation at 404, 760, and 992 GHz induced distinct Shapiro steps (i.e. constant voltage steps at voltages n(hf/2e), n=1,2,...) in the current voltage characteristics as well as modulation of the critical current. Steps were observed at voltages up to 17 mV and 6 mV, at temperatures of 9 K and 57 K respectively. This corresponds to maximum Josephson oscillation frequencies of 8 and 3 THz at these temperatures. These are the first far infrared measurements performed on high T/sub c/ junctions. Measurements of the power, frequency, and temperature dependence of the Shapiro steps are presented and discussed in the context of a resistively and capacitively shunted junction (RCSJ) model. A value of 4.5 fF for the junction capacitance is inferred from the hysteresis of the slightly underdamped current-voltage characteristics.>
We have studied the far infrared behavior of high -T/sub c/ superconductor-normal metal-superconductor (SNS) microbridges with T/sub c/>85 K and critical current-resistance products (I/sub c/R/sub N/) as high as 10 mV at 4 K. These are the highest I/sub c/R/sub N/ products reported to date for microfabricated Josephson junctions of any material. The junctions were integrated at the feeds of planar log-periodic antennas made from Au thin films. The junctions had dc normal state resistances R/sub N/ between 6 and 38 /spl Omega/, reasonably well matched to the antenna's estimated RF impedance of 53 /spl Omega/. Far infrared laser radiation at 404, 760, and 992 GHz induced distinct Shapiro steps (i.e. constant voltage steps at voltages n(hf/2e), n=1,2,...) in the current voltage characteristics as well as modulation of the critical current. Steps were observed at voltages up to 17 mV and 6 mV, at temperatures of 9 K and 57 K respectively. This corresponds to maximum Josephson oscillation frequencies of 8 and 3 THz at these temperatures. These are the first far infrared measurements performed on high T/sub c/ junctions. Measurements of the power, frequency, and temperature dependence of the Shapiro steps are presented and discussed in the context of a resistively and capacitively shunted junction (RCSJ) model. A value of 4.5 fF for the junction capacitance is inferred from the hysteresis of the slightly underdamped current-voltage characteristics. >