Abstract Recent theoretical and experimental advances have shown that squeezed states of light can be engineered to enhance the resolution of optical measurements. Extending such quantum-enhanced techniques to nonlinear optical processes has therefore attracted considerable interest. In particular, two-photon absorption (TPA), which has wide-ranging applications in physics, chemistry, and biology, has emerged as a promising platform for exploiting these quantum advantages. In this work, we investigate whether and how correlations between light modes can be used to improve optical resolution in TPA. We analyze non-degenerate TPA transmission measurements using two-mode squeezed light and compare different measurement strategies. We find that intensity correlation measurements offer better performance in terms of the achievable estimation error compared to normalized intensity correlations or measurements of the noise reduction factor (NRF). The achievable enhancement from intensity and NRF measurements are degraded by competing photon losses. In contrast, the normalized intensity correlation approach remains robust to loss, albeit at the cost of forfeiting the scaling enhancement at large photon numbers achievable with nonclassical light fields. Thus, we establish a trade-off between robustness to loss and the achievable quantum advantage. We further compute the corresponding Cramér–Rao bound, which sets the ultimate lower limit on the achievable estimation error for the photon-counting-based measurement strategies investigated in this work.
Abstract Recent theoretical and experimental advances have shown that squeezed states of light can be engineered to enhance the resolution of optical measurements. Extending such quantum-enhanced techniques to nonlinear optical processes has therefore attracted considerable interest. In particular, two-photon absorption (TPA), which has wide-ranging applications in physics, chemistry, and biology, has emerged as a promising platform for exploiting these quantum advantages. In this work, we investigate whether and how correlations between light modes can be used to improve optical resolution in TPA. We analyze non-degenerate TPA transmission measurements using two-mode squeezed light and compare different measurement strategies. We find that intensity correlation measurements offer better performance in terms of the achievable estimation error compared to normalized intensity correlations or measurements of the noise reduction factor (NRF). The achievable enhancement from intensity and NRF measurements are degraded by competing photon losses. In contrast, the normalized intensity correlation approach remains robust to loss, albeit at the cost of forfeiting the scaling enhancement at large photon numbers achievable with nonclassical light fields. Thus, we establish a trade-off between robustness to loss and the achievable quantum advantage. We further compute the corresponding Cramér–Rao bound, which sets the ultimate lower limit on the achievable estimation error for the photon-counting-based measurement strategies investigated in this work.
Two-photon absorption (TPA) is of fundamental importance in super-resolution imaging and spectroscopy. Its nonlinear character allows for the prospect of using quantum resources, such as entanglement, to improve measurement precision or to gain new information on, e.g., ultrafast molecular dynamics. Here, we establish the metrological properties of nonclassical squeezed light sources for precision measurements of TPA cross sections. We find that the Cram\'er-Rao bound does not provide a fundamental limit for the precision achievable with squeezed states in the limit of very small cross sections. Considering the most relevant measurement strategies---namely, photon-counting and quadrature measurements---we determine the quantum advantage provided by squeezed states as compared to coherent states. We find that squeezed states outperform the precision achievable by coherent states when performing quadrature measurements, which provide improved scaling of the Fisher information with respect to the mean photon number $\ensuremath{\sim}{n}^{4}$. Due to the interplay of the incoherent nature and the nonlinearity of the TPA process, unusual scaling can also be obtained with coherent states, which feature an $\ensuremath{\sim}{n}^{3}$ scaling in both quadrature and photon-counting measurements.
Abstract Two-photon absorption (TPA) is a nonlinear optical process with wide-ranging applications from spectroscopy to super-resolution imaging. Despite this, the precise measurement and characterisation of TPA parameters are challenging due to their inherently weak nature. We study the potential of single-mode quantum light to enhance TPA parameter estimation through the quantum Fisher information (QFI). Discrete variable quantum states (defined to be a finite superposition of Fock states) are optimised to maximise the QFI for given absorption, revealing a quantum advantage compared to both the coherent state (classical) benchmark and the single-mode squeezed vacuum state. For fixed average energy n ¯ ∈ 2 N , the Fock state is shown to be optimal for large TPA parameters, while a superposition of vacuum and a particular Fock state is optimal for small absorption for all n ¯ . This differs from single-photon absorption where the Fock state is always optimal. Notably, photon counting is demonstrated to offer optimal or nearly optimal performance compared to the QFI bound for all levels of TPA parameters for the optimised quantum probes, and their quantum advantage is shown to be robust to single-photon loss. Our findings provide insight into known limiting behaviours of Gaussian probes and their different FI scalings under photon counting ( ∝ n ¯ 2 for squeezed vacuum states versus n ¯ 3 for coherent states). The squeezed state outperforms coherent states for small TPA parameters but underperforms in the intermediate regime, becoming comparable in the large absorption limit. This can be explained through fundamental differences between behaviours of even and odd number Fock states: the former’s QFI diverges in both large and small absorption limits, while the latter diverges only in the small absorption limit, dominating at intermediate scales.
Multiphoton absorption is of vital importance in many spectroscopic, microscopic, or lithographic applications. However, given that it is an inherently weak process, the detection of multiphoton absorption signals typically requires large field intensities, hindering its applicability in many practical situations. In this Letter, we show that placing a multiphoton absorbent inside an imbalanced nonlinear interferometer can enhance the precision of multiphoton cross section estimation with respect to strategies based on photon-number measurements using coherent or even squeezed light directly transmitted through the medium. In particular, the power scaling of the sensitivity with photon flux can be increased by 1 order compared with transmission measurements of the sample with coherent light, such that the measurement precision at any given intensity can be greatly enhanced. Furthermore, we show that this enhanced measurement precision is robust against experimental imperfections leading to photon losses, which usually tend to degrade the detection sensitivity. We trace the origin of this enhancement to an optimal degree of squeezing which has to be generated in a nonlinear SU(1,1) interferometer.
Absorption and gain processes are fundamental to any light-matter interaction and a precise measurement of these parameters is important for various scientific and technological applications. Quantum probes, specifically the squeezed states, have proved very successful, particularly in the applications that deal with phase shift and force measurements. In this paper, we focus on improving the sensitivity of the estimation of the photon-loss coefficient of a weakly absorbing medium as well as the estimation of the gain parameter using a two-mode bright squeezed state. The generation of this state combines the advantage of a coherent beam for its large photon number with the quantum properties of the two-mode squeezing operation in an optical parametric amplifier. We present two measurement schemes: balanced photodetection and time-reversed metrology, both utilizing two-mode bright squeezed light. The maximum quantum advantage we can achieve using two-mode bright squeezed light is 3.7 times for the absorption parameter $\ensuremath{\alpha}=0.05$ and 8.4 times for $\ensuremath{\alpha}=0.01$ as compared to using only the coherent state. Similarly, the maximum quantum advantage for the estimation of optical gain is found around 2.95 times for the gain coefficient G=1.05 and around 6.35 times for G=1.01. We discuss the significance of using one measurement scheme over the other under different squeezing conditions. We compare our results with the Cram\'er-Rao bound for a two-mode bright squeezed state to assess the quality of the proposed methodologies.
Enhancing the precision of a measurement requires maximizing the information that can be gained about the quantity of interest from probing a system. For optical-based measurements, such an enhancement can be achieved through two approaches, increasing the number of photons used to interrogate the system and using quantum states of light to increase the amount of quantum Fisher information gained per photon. Here we consider the use of quantum states of light with a large number of photons, namely the bright single-mode squeezed state and the bright two-mode squeezed state, which take advantage of both of these approaches for the problem of transmission estimation. We show that, in the limit of large squeezing, these states approach the maximum possible quantum Fisher information per photon for transmission estimation that is achieved with the Fock state and the vacuum two-mode squeezed state. Since the bright states we consider can be generated at powers much higher than those of the quantum states that achieve the maximum quantum Fisher information per photon, they can achieve a much higher absolute precision as quantified by the quantum Cram\'er-Rao bound. We discuss the effects of losses external to the system on the precision of transmission estimation and identify simple measurement techniques that can saturate the quantum Cram\'er-Rao bound for the bright squeezed states even in the presence of such external losses.
Abstract In this review we present the potentialities and the achievements of the use of non-classical photon-number correlations in twin-beam states for many applications, ranging from imaging to metrology. Photon-number correlations in the quantum regime are easily produced and are rather robust against unavoidable experimental losses, and noise in some cases, if compared to the entanglement, where losing one photon can completely compromise the state and its exploitable advantages. Here, we will focus on quantum enhanced protocols in which only phase-insensitive intensity measurements (photon-number counting) are performed, which allow probing the transmission/absorption properties of a system, leading, for example, to innovative target detection schemes in a strong background. In this framework, one of the advantages is that the sources experimentally available emit a wide number of pair-wise correlated modes, which can be intercepted and exploited separately, for example by many pixels of a camera, providing a parallelism, essential in several applications, such as wide-field sub-shot-noise imaging and quantum enhanced ghost imaging. Finally, non-classical correlation enables new possibilities in quantum radiometry, e.g. the possibility of absolute calibration of a spatial resolving detector from the on-off single-photon regime to the linear regime in the same setup.