We demonstrate the fabrication of an optical nanofiber cavity designed for efficient interface with ytterbium (Yb) atoms at telecom-wavelength transitions. Replacing the conventional hydrogen-oxygen flame with a deuterium-oxygen flame in the heat-and-pull method suppresses hydroxyl-induced absorption losses and enables low-loss nanofiber production with minimal modifications to the existing fabrication system. Using this technique, we fabricate a nanofiber cavity at 1389 nm that exhibits an intrinsic round-trip loss of 0.31(2)% and a finesse of 2.0(1)×103. This performance corresponds to a projected cooperativity of 90 when interfaced with Yb atoms, indicating that the cavity is well suited for efficient atom–photon coupling at telecom-wavelength transitions. Our results establish a practical route for developing fiber-integrated atom–photon interfaces in the telecom band, a critical step toward scalable quantum communication and distributed quantum computing.
We demonstrate the fabrication of an optical nanofiber cavity designed for efficient interface with ytterbium (Yb) atoms at telecom-wavelength transitions. Replacing the conventional hydrogen-oxygen flame with a deuterium-oxygen flame in the heat-and-pull method suppresses hydroxyl-induced absorption losses and enables low-loss nanofiber production with minimal modifications to the existing fabrication system. Using this technique, we fabricate a nanofiber cavity at 1389 nm that exhibits an intrinsic round-trip loss of 0.31(2)% and a finesse of 2.0(1)×103. This performance corresponds to a projected cooperativity of 90 when interfaced with Yb atoms, indicating that the cavity is well suited for efficient atom–photon coupling at telecom-wavelength transitions. Our results establish a practical route for developing fiber-integrated atom–photon interfaces in the telecom band, a critical step toward scalable quantum communication and distributed quantum computing.
Strong coupling of a reconfigurable 171Yb atom array to a tunable telecom-band nanofiber cavity
Nanophotonic cavities provide strong atom-photon coupling in a compact, directly fiber-coupled geometry, while a reconfigurable array of 171Yb atoms combines high-fidelity gates with a metastable qubit state coupled directly to a telecom-band transition, making the two a natural interface between neutral-atom quantum processors and telecom quantum networks. Here, we realize strong atom-cavity coupling on the 3P0↔3D1 transition of 171Yb, establishing, to our knowledge, the first neutral-atom cavity-QED system to reach the single-atom strong-coupling regime on a telecom-band atomic transition. Reflection spectroscopy of a single-sided cavity yields a single-atom internal cooperativity of Cin=5.6(1.0) and collective coupling following N scaling up to N=5 atoms, with homogeneous coupling at antinodes over $\sim$200 μm along the nanofiber. Thermal tuning of a fiber Bragg grating provides in situ control of the cavity outcoupling rate over two orders of magnitude from the undercoupled to the overcoupled regime, relevant for various atom-cavity protocols. We confirm compatibility with reconfigurable atom arrays by demonstrating 99.95(6)\% imaging fidelity and trap lifetimes comparable to free-space array, at 1 μm from the nanofiber axis. Moreover, the diameter-engineered antireflection design of the nanofiber enables tweezer-based atom transport across the nanofiber with no measurable loss or heating at 4.5 μm above the nanofiber, supporting a two-layer architecture for the nanofiber-integrated atom array. From the demonstrated atom-cavity coupling, atom capacity, and cavity mode profile, we project time-multiplexed remote atom-atom entanglement generation at 40 kHz, with prospects for further scaling through technical enhancements and channel multiplexing.
Wavelengths in the telecommunication window (ca.1.25--1.65 $\ensuremath{\mu}$m) are ideal for quantum communication, due to the low transmission loss in optical-fiber networks. To realize quantum networks operating at these wavelengths, we need long-lived quantum memories that couple efficiently to telecom-band photons. This study proposes using optical tweezers to couple neutral ytterbium atoms, which have a strong telecom-wavelength transition, to a silicon photonic-crystal cavity. The combination of high system efficiency, telecom-band operation, and long coherence times makes this platform well suited for quantum optics on a silicon chip and long-distance quantum communication.
We demonstrate the fabrication of ultra-low-loss, all-fiber Fabry-Perot cavities that contain a nanofiber section, optimized for cavity quantum electrodynamics. By continuously monitoring the finesse and fiber radius during the fabrication of a nanofiber between two fiber Bragg gratings, we were able to precisely evaluate taper transmission as a function of radius. The resulting cavities have an internal round-trip loss of only 0.31% at a nanofiber waist radius of 207 nm, with a total finesse of 1380, and a maximum expected internal cooperativity of ∼1050 for a cesium atom on the nanofiber surface. Our ability to fabricate such high-finesse nanofiber cavities may open the door for the realization of high-fidelity scalable quantum networks.
Neutral atoms are among the leading platforms toward realizing fault-tolerant quantum computation (FTQC). However, scaling up a single neutral-atom device beyond 10 4 atoms to meet the demands of FTQC for practical applications remains a challenge. To overcome this challenge, we clarify the criteria and technological requirements for further scaling based on multiple neutral atom quantum processing units (QPUs) connected through photonic networking links. Our quantitative analysis shows that nanofiber optical cavities have the potential as an efficient atom-photon interface to enable fast entanglement generation between atoms in distinct neutral-atom modules, allowing multiple neutral-atom QPUs to operate cooperatively without sacrificing computational speed. Using state-of-the-art millimeter-scale nanofiber cavities with the finesse of thousands, over a hundred atoms can be coupled to the cavity mode with an optical tweezer array, with expected single-atom cooperativity exceeding 100 for telecom-band transition of ytterbium atoms. This enables efficient time-multiplexed entanglement generation with a predicted Bell-pair generation rate of 10 5 s − 1 while maintaining a small footprint for channel multiplexing. These proposals and results indicate a promising pathway for building large-scale multiprocessor fault-tolerant quantum computers using neutral atoms, nanofiber optical cavities, and fiber-optic networks.