Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.02501

Can TCOs Transform Cavity-QED?

Wance Wang, Dhruv Fomra, Amit Agrawal, Henri J. Lezec, J. Britton

Published Jun 3, 2025• 6 citations
arXivHTMLPDF

Abstract

Transparent conductive oxides (TCO) enable confinement of charge-sensitive ions and Rydberg atoms proximal to dielectric structures including waveguides and photon detectors. However, optical loss precludes the use of TCOs within high-finesse optical micro-resonators. Here we characterize a ZnO-based TCO that markedly reduces optical absorption. At 1650\text{ nm} we observe a 22,000 finesse in a Fabry-Pérot optical cavity coated with a 30\text{ nm} ZnO layer. This is a 5000 times reduction relative to indium tin oxide (ITO) at this wavelength. The same ZnO film exhibits 0.01\text{ \ensuremathΩ\ensuremath{\cdot}cm} surface resistivity at DC. We anticipate a step change in cavity-QED systems incorporating ultra-low loss TCOs like ZnO.

DOI
10.48550/arxiv.2506.02501

Related papers

Low-frequency optical response, superluminal propagation, and optical drag in a transparent conductor oxide

Azmat Iqbal Bashir, Maryam Sakhi

Abstract Superluminal propagation of light in various materials has attracted tremendous research for fundamental and practical interest. This study is aimed at investigating the low-frequency off-resonance optical response, gain-assisted superluminal photon propagation, and optical drag through GaZnO, an innovative TCO (transparent conductor oxide) material. TCO materials are among the novel class of optical materials, simultaneously showing high transparency and conductivity, leading to milestone fundamental and practical device implications. Earlier, no study reported superluminal propagation of light and rotary photon drag in GaZnO in the low-frequency range. In particular, gain-assisted superluminal propagation of light and photon drag is studied employing the Drude-Lorentz model. The phenomenon of gain-assisted superluminal propagation is studied in light of negative/positive refractive index and group index that lead to superluminal phase velocity and group velocity. TCO nature of GaZnO is also justified in light of large absorption coefficient and real conductivity at the highest transmission coefficient. The findings may leads to potential applications in the advanced applications in laser and optics, photonics, optical communication systems, signal processing, and quantum information processing.

Optical and Quantum Electronics•May 20, 2026•1 citation

Fabry-Perot microcavity for diamond-based photonics

Erika Janitz, Maximilian Ruf, Mark Dimock +3 more

Open Fabry-Perot microcavities represent a promising route for achieving a quantum electrodynamics (cavity-QED) platform with diamond-based emitters. In particular, they offer the opportunity to introduce high-purity, minimally fabricated material into a tunable, high quality factor optical resonator. Here, we demonstrate a fiber-based microcavity incorporating a thick ($>10\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\text{m}$) diamond membrane with a finesse of 17 000, corresponding to a quality factor $Q\ensuremath{\sim}{10}^{6}$. Such minimally fabricated thick samples can contain optically stable emitters similar to those found in bulk diamond. We observe modified microcavity spectra in the presence of the membrane, and we develop analytic and numerical models to describe the effect of the membrane on cavity modes, including loss and coupling to higher-order transverse modes. We estimate that a Purcell enhancement of approximately 20 should be possible for emitters within the diamond in this device, and we provide evidence that better diamond surface treatments and mirror coatings could increase this value to 200 in a realistic system.

arXiv:1508.06588•Physical Review A•Oct 30, 2015•86 citations

Characterization of high-finesse mirrors: Loss, phase shifts, and mode structure in an optical cavity

Christina J. Hood, Harry J. Kimble, Jun Ye

An extensive characterization of high-finesse optical cavities used in cavity QED experiments is described. Different techniques in the measurement of the loss and phase shifts associated with the mirror coatings are discussed and their agreement shown. Issues of cavity-field mode structure supported by the dielectric coatings are related to our effort to achieve the strongest possible coupling between an atom and the cavity.

arXiv:quant-ph/0101103•Physical Review A•Aug 13, 2001•245 citations

Stability of a high-finesse optical cavity at 493 nm in vacuum for cavity QED with Barium ions

Diptaranjan Das, Ezra Kassa, Hiroki Takahashi

We explore the stability of a high-finesse optical cavity at 493 nm in vacuum for cavity QED with Barium ions. A high-finesse Fabry-Perot cavity is built using mirrors with high-reflectivity (HR) coatings that are implemented by stacking multiple thin films of low-loss dielectrics on substrates. Applications of such HR mirrors in the near ultraviolet (UV) range have been hampered by degradation of coatings in vacuum. Here, we explore the degradation of mirrors with HR coatings at 493 nm in vacuum. We study both vacuum-induced and laser-induced effects on oxide-coated cavity mirrors by probing changes in cavity loss using cavity lifetime measurements. We investigate the role of circulating power in the rate of increase in cavity loss and demonstrate methods of reversal of cavity degradation. While we observe no degradation without long exposure or with short exposures at lower circulating powers, we find evidence of degradation on long exposure to high circulating powers. We discuss potential causes and conclude that laser-induced deposition is the likely cause while ruling out thermally activated processes due to laser-induced heating.

physics.opticsCross-listedarXiv:2603.17638•Applied Optics•Mar 19, 2026•2 citations

Van derWaals enhancement of optical atom potentials via resonant coupling to surface polaritons

Joseph Kerckhoff, Hideo Mabuchi

Contemporary experiments in cavity quantum electrodynamics (cavity QED) with gas-phase neutral atoms rely increasingly on laser cooling and optical, magneto-optical or magnetostatic trapping methods to provide atomic localization with sub-micron uncertainty. Difficult to achieve in free space, this goal is further frustrated by atom-surface interactions if the desired atomic placement approaches within several hundred nanometers of a solid surface, as can be the case in setups incorporating monolithic dielectric optical resonators such as microspheres, microtoroids, microdisks or photonic crystal defect cavities. Typically in such scenarios, the smallest atom-surface separation at which the van der Waals interaction can be neglected is taken to be the optimal localization point for associated trapping schemes, but this sort of conservative strategy generally compromises the achievable cavity QED coupling strength. Here we suggest a new approach to the design of optical dipole traps for atom confinement near surfaces that exploits strong surface interactions, rather than avoiding them, and present the results of a numerical study based on (39)K atoms and indium tin oxide (ITO). Our theoretical framework points to the possibility of utilizing nanopatterning methods to engineer novel modifications of atom-surface interactions.

arXiv:0905.4261•Optics Express•Aug 5, 2009•0 citations

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

Mihir Khanna, Yang Hu, Thomas P. Purdy

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-pharXiv:2601.13199•Optica•Jan 20, 2026•1 citation
Transparent conductive oxides (TCO) enable confinement of charge-sensitive ions and Rydberg atoms proximal to dielectric structures including waveguides and photon detectors. However, optical loss precludes the use of TCOs within high-finesse optical micro-resonators. Here we characterize a ZnO-based TCO that markedly reduces optical absorption. At 1650\text{ nm} we observe a 22,000 finesse in a Fabry-Pérot optical cavity coated with a 30\text{ nm} ZnO layer. This is a 5000 times reduction relative to indium tin oxide (ITO) at this wavelength. The same ZnO film exhibits 0.01\text{ \ensuremathΩ\ensuremath{\cdot}cm} surface resistivity at DC. We anticipate a step change in cavity-QED systems incorporating ultra-low loss TCOs like ZnO.
Abstract Superluminal propagation of light in various materials has attracted tremendous research for fundamental and practical interest. This study is aimed at investigating the low-frequency off-resonance optical response, gain-assisted superluminal photon propagation, and optical drag through GaZnO, an innovative TCO (transparent conductor oxide) material. TCO materials are among the novel class of optical materials, simultaneously showing high transparency and conductivity, leading to milestone fundamental and practical device implications. Earlier, no study reported superluminal propagation of light and rotary photon drag in GaZnO in the low-frequency range. In particular, gain-assisted superluminal propagation of light and photon drag is studied employing the Drude-Lorentz model. The phenomenon of gain-assisted superluminal propagation is studied in light of negative/positive refractive index and group index that lead to superluminal phase velocity and group velocity. TCO nature of GaZnO is also justified in light of large absorption coefficient and real conductivity at the highest transmission coefficient. The findings may leads to potential applications in the advanced applications in laser and optics, photonics, optical communication systems, signal processing, and quantum information processing.
Open Fabry-Perot microcavities represent a promising route for achieving a quantum electrodynamics (cavity-QED) platform with diamond-based emitters. In particular, they offer the opportunity to introduce high-purity, minimally fabricated material into a tunable, high quality factor optical resonator. Here, we demonstrate a fiber-based microcavity incorporating a thick ($>10\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\text{m}$) diamond membrane with a finesse of 17 000, corresponding to a quality factor $Q\ensuremath{\sim}{10}^{6}$. Such minimally fabricated thick samples can contain optically stable emitters similar to those found in bulk diamond. We observe modified microcavity spectra in the presence of the membrane, and we develop analytic and numerical models to describe the effect of the membrane on cavity modes, including loss and coupling to higher-order transverse modes. We estimate that a Purcell enhancement of approximately 20 should be possible for emitters within the diamond in this device, and we provide evidence that better diamond surface treatments and mirror coatings could increase this value to 200 in a realistic system.
We explore the stability of a high-finesse optical cavity at 493 nm in vacuum for cavity QED with Barium ions. A high-finesse Fabry-Perot cavity is built using mirrors with high-reflectivity (HR) coatings that are implemented by stacking multiple thin films of low-loss dielectrics on substrates. Applications of such HR mirrors in the near ultraviolet (UV) range have been hampered by degradation of coatings in vacuum. Here, we explore the degradation of mirrors with HR coatings at 493 nm in vacuum. We study both vacuum-induced and laser-induced effects on oxide-coated cavity mirrors by probing changes in cavity loss using cavity lifetime measurements. We investigate the role of circulating power in the rate of increase in cavity loss and demonstrate methods of reversal of cavity degradation. While we observe no degradation without long exposure or with short exposures at lower circulating powers, we find evidence of degradation on long exposure to high circulating powers. We discuss potential causes and conclude that laser-induced deposition is the likely cause while ruling out thermally activated processes due to laser-induced heating.
Contemporary experiments in cavity quantum electrodynamics (cavity QED) with gas-phase neutral atoms rely increasingly on laser cooling and optical, magneto-optical or magnetostatic trapping methods to provide atomic localization with sub-micron uncertainty. Difficult to achieve in free space, this goal is further frustrated by atom-surface interactions if the desired atomic placement approaches within several hundred nanometers of a solid surface, as can be the case in setups incorporating monolithic dielectric optical resonators such as microspheres, microtoroids, microdisks or photonic crystal defect cavities. Typically in such scenarios, the smallest atom-surface separation at which the van der Waals interaction can be neglected is taken to be the optimal localization point for associated trapping schemes, but this sort of conservative strategy generally compromises the achievable cavity QED coupling strength. Here we suggest a new approach to the design of optical dipole traps for atom confinement near surfaces that exploits strong surface interactions, rather than avoiding them, and present the results of a numerical study based on (39)K atoms and indium tin oxide (ITO). Our theoretical framework points to the possibility of utilizing nanopatterning methods to engineer novel modifications of atom-surface interactions.
We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.