Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2505.08424

CMOS-Compatible, Wafer-Scale Processed Superconducting Qubits Exceeding Energy Relaxation Times of 200us

Mayer, T., Weber, J., Music, E., Carla Morán Guizán, Simon Lang, L. Schwarzenbach, C. Dhieb, B. Kiliclar, Alwin Maiwald, Zhenlin Luo, W. Lerch, Zahn, D., I. Eisele, Rui N. Pereira, Christoph Kutter

Published May 13, 2025• 5 citations
arXivHTMLPDF

Abstract

We present the results of an industry-grade fabrication of superconducting qubits on 200 mm wafers utilizing CMOS-established processing methods. By automated waferprober resistance measurements at room temperature, we demonstrate a Josephson junction fabrication yield of 99.7% (shorts and opens) across more than 10000 junctions and a qubit frequency prediction accuracy of 1.6%. In cryogenic characterization, we provide statistical results regarding energy relaxation times of the qubits with a median T1 of up to 100 us and individual devices consistently approaching 200 us in long-term measurements. This represents the best performance reported so far for superconducting qubits fabricated by industry-grade, wafer-level subtractive processes.

DOI
10.48550/arxiv.2505.08424

Related papers

CMOS-compatible processing and room-temperature characterization at the wafer level for scalable quantum computing

Simon Lang, T. Mayer, Johannes Weber +10 more

We report on an industry-grade complementary metal-oxide semiconductor (CMOS)-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices that reaches 92.8%, with a resistance spread evaluated across the full wafer 200 mm in diameter of 12.4% and relaxation times ${T}_{1}$ approaching $80\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. Furthermore, we conducted a comprehensive analysis of wafer-scale room-temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low-temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1% and oxide barrier variation of 7.2% was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived at the wafer level by applying the Ambegaokar-Baratoff model before making low-temperature measurements. This sets the stage for precooldown wafer-level JJ evaluation and sorting. In particular, such early device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, this enables the fabrication of large multichip quantum systems in the future. Our analysis highlights the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.

arXiv:2504.18173•Physical Review Applied•Nov 18, 2025•5 citations

Path toward manufacturable superconducting qubits with relaxation times exceeding 0.1 ms

Jeroen Verjauw, R. Acharya, Jacques Van Damme +11 more

Abstract As the superconducting qubit platform matures towards ever-larger scales in the race towards a practical quantum computer, limitations due to qubit inhomogeneity through lack of process control become apparent. To benefit from the advanced process control in industry-scale CMOS fabrication facilities, different processing methods will be required. In particular, the double-angle evaporation and lift-off techniques used for current, state-of-the-art superconducting qubits are generally incompatible with modern-day manufacturable processes. Here, we demonstrate a fully CMOS compatible qubit fabrication method, and show results from overlap Josephson junction devices with long coherence and relaxation times, on par with the state-of-the-art. We experimentally verify that Argon milling—the critical step during junction fabrication—and a subtractive-etch process nevertheless result in qubits with average qubit energy relaxation times T 1 reaching 70 µs, with maximum values exceeding 100 µs. Furthermore, we show that our results are still limited by surface losses and not, crucially, by junction losses. The presented fabrication process, therefore, heralds an important milestone towards a manufacturable 300 mm CMOS process for high-coherence superconducting qubits and has the potential to advance the scaling of superconducting device architectures.

arXiv:2202.10303•npj Quantum Information•Aug 9, 2022•53 citations

Advanced CMOS manufacturing of superconducting qubits on 300 mm wafers

Jacques Van Damme, Shana Massar, R. Acharya +13 more

Abstract The development of superconducting qubit technology has shown great potential for the construction of practical quantum computers 1,2 . As the complexity of quantum processors continues to grow, the need for stringent fabrication tolerances becomes increasingly critical 3 . Utilizing advanced industrial fabrication processes could facilitate the necessary level of fabrication control to support the continued scaling of quantum processors. However, at present, these industrial processes are not optimized to produce high-coherence devices, nor are they a priori compatible with the approaches commonly used to make superconducting qubits. Here we demonstrate superconducting transmon qubits manufactured in a 300 mm complementary metal–oxide–semiconductor (CMOS) pilot line using industrial fabrication methods, with resulting relaxation and coherence times exceeding 100 μs. We show across-wafer, large-scale statistics of coherence, yield, variability and ageing that confirm the validity of our approach. The presented industry-scale fabrication process, which uses only optical lithography and reactive-ion etching, has a performance and yield in line with conventional laboratory-style techniques utilizing metal lift-off, angled evaporation and electron-beam writing 4 . Moreover, it offers the potential for further upscaling through three-dimensional integration 5 and more process optimization. This result marks the advent of an alternative and new, large-scale, truly CMOS-compatible fabrication method for superconducting quantum computing processors.

arXiv:2403.01312•Nature•Sep 18, 2024•89 citations

Fabrication and room temperature characterization of trilayer junctions for the development of superconducting qubits on 300 mm wafers

Danny Wan, Sébastien Couet, Xiaoyu Piao +15 more

Abstract We present the development of Nb/Al–AlO x /Nb trilayer stacks and the implementation of a full 300 mm process flow for the fabrication of trilayer-based superconducting qubits. Room temperature electrical characterization of tens of thousands of Josephson junctions showed good agreement between blanket resistance-area (RA) product and RA product of processed wafers. Cross-bridge Kelvin resistor structures with dimensions ranging from 200 nm to 1.2 μ m were tested and exhibited excellent yield and exceptionally low resistance variability down to <1%. This result is expected to translate to reduced qubit device variability and improved predictability of qubit transition frequencies at cryogenic temperatures.

Japanese Journal of Applied Physics•Feb 12, 2021•21 citations

3D-Integrated Superconducting qubits: CMOS-Compatible, Wafer-Scale Processing for Flip-Chip Architectures

Mayer, T., Hugo Bender, Simon Lang +16 more

In this article, we present a technology development of a superconducting qubit device 3D-integrated by flip-chip-bonding and processed following CMOS fabrication standards and contamination rules on 200 mm wafers. We present the utilized proof-of-concept chip designs for qubit- and carrier chip, as well as the respective front-end and back-end fabrication techniques. In characterization of the newly developed microbump technology based on metallized KOH-etched Si-islands, we observe a superconducting transition of the used metal stacks and radio frequency (RF) signal transfer through the bump connection with negligible attenuation. In time-domain spectroscopy of the qubits we find high yield qubit excitation with energy relaxation times of up to 15 us.

arXiv:2505.04337•May 7, 2025•7 citations

Stability studies on subtractively-fabricated CMOS-compatible superconducting transmon qubits

Chawki Dhieb, Johannes Weber, Samuel Taubenberger +12 more

Developing fault-tolerant quantum processors with error correction demands large arrays of physical qubits whose key performance metrics (coherence times, control fidelities) must remain within specifications over both short and long timescales. Here we investigated the temporal stability of subtractively fabricated CMOS-compatible superconducting transmon qubits. During a single cooldown and over a period of 95 hours, we monitored several parameters for 8 qubits, including coherence times $T_1$ and $T_2^*$, which exhibit fluctuations originating primarily from the interaction between two-level system (TLS) defects and the host qubit. We also demonstrate that subtractively-fabricated superconducting quantum devices align with the theoretical predictions that higher mean lifetimes $T_1$ correspond to larger fluctuations. To assess long-term stability, we tracked two representative qubits over 10 cooldown cycles spanning more than one year. We observed an average total downward shift in both qubit transition frequencies of approximately 61 MHz within the thermal cycles considered. In contrast, readout resonator frequencies decreased only marginally. Meanwhile, $T_1$ exhibits fluctuations from cycle to cycle, but maintains a stable baseline value.

quant-pharXiv:2512.18037•Dec 23, 2025•1 citation
We present the results of an industry-grade fabrication of superconducting qubits on 200 mm wafers utilizing CMOS-established processing methods. By automated waferprober resistance measurements at room temperature, we demonstrate a Josephson junction fabrication yield of 99.7% (shorts and opens) across more than 10000 junctions and a qubit frequency prediction accuracy of 1.6%. In cryogenic characterization, we provide statistical results regarding energy relaxation times of the qubits with a median T1 of up to 100 us and individual devices consistently approaching 200 us in long-term measurements. This represents the best performance reported so far for superconducting qubits fabricated by industry-grade, wafer-level subtractive processes.
We report on an industry-grade complementary metal-oxide semiconductor (CMOS)-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices that reaches 92.8%, with a resistance spread evaluated across the full wafer 200 mm in diameter of 12.4% and relaxation times T1{T}_{1}T1​ approaching $80\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. Furthermore, we conducted a comprehensive analysis of wafer-scale room-temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low-temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1% and oxide barrier variation of 7.2% was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived at the wafer level by applying the Ambegaokar-Baratoff model before making low-temperature measurements. This sets the stage for precooldown wafer-level JJ evaluation and sorting. In particular, such early device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, this enables the fabrication of large multichip quantum systems in the future. Our analysis highlights the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.
Abstract As the superconducting qubit platform matures towards ever-larger scales in the race towards a practical quantum computer, limitations due to qubit inhomogeneity through lack of process control become apparent. To benefit from the advanced process control in industry-scale CMOS fabrication facilities, different processing methods will be required. In particular, the double-angle evaporation and lift-off techniques used for current, state-of-the-art superconducting qubits are generally incompatible with modern-day manufacturable processes. Here, we demonstrate a fully CMOS compatible qubit fabrication method, and show results from overlap Josephson junction devices with long coherence and relaxation times, on par with the state-of-the-art. We experimentally verify that Argon milling—the critical step during junction fabrication—and a subtractive-etch process nevertheless result in qubits with average qubit energy relaxation times T 1 reaching 70 µs, with maximum values exceeding 100 µs. Furthermore, we show that our results are still limited by surface losses and not, crucially, by junction losses. The presented fabrication process, therefore, heralds an important milestone towards a manufacturable 300 mm CMOS process for high-coherence superconducting qubits and has the potential to advance the scaling of superconducting device architectures.
Abstract The development of superconducting qubit technology has shown great potential for the construction of practical quantum computers 1,2 . As the complexity of quantum processors continues to grow, the need for stringent fabrication tolerances becomes increasingly critical 3 . Utilizing advanced industrial fabrication processes could facilitate the necessary level of fabrication control to support the continued scaling of quantum processors. However, at present, these industrial processes are not optimized to produce high-coherence devices, nor are they a priori compatible with the approaches commonly used to make superconducting qubits. Here we demonstrate superconducting transmon qubits manufactured in a 300 mm complementary metal–oxide–semiconductor (CMOS) pilot line using industrial fabrication methods, with resulting relaxation and coherence times exceeding 100 μs. We show across-wafer, large-scale statistics of coherence, yield, variability and ageing that confirm the validity of our approach. The presented industry-scale fabrication process, which uses only optical lithography and reactive-ion etching, has a performance and yield in line with conventional laboratory-style techniques utilizing metal lift-off, angled evaporation and electron-beam writing 4 . Moreover, it offers the potential for further upscaling through three-dimensional integration 5 and more process optimization. This result marks the advent of an alternative and new, large-scale, truly CMOS-compatible fabrication method for superconducting quantum computing processors.
Abstract We present the development of Nb/Al–AlO x /Nb trilayer stacks and the implementation of a full 300 mm process flow for the fabrication of trilayer-based superconducting qubits. Room temperature electrical characterization of tens of thousands of Josephson junctions showed good agreement between blanket resistance-area (RA) product and RA product of processed wafers. Cross-bridge Kelvin resistor structures with dimensions ranging from 200 nm to 1.2 μ m were tested and exhibited excellent yield and exceptionally low resistance variability down to <1%. This result is expected to translate to reduced qubit device variability and improved predictability of qubit transition frequencies at cryogenic temperatures.
In this article, we present a technology development of a superconducting qubit device 3D-integrated by flip-chip-bonding and processed following CMOS fabrication standards and contamination rules on 200 mm wafers. We present the utilized proof-of-concept chip designs for qubit- and carrier chip, as well as the respective front-end and back-end fabrication techniques. In characterization of the newly developed microbump technology based on metallized KOH-etched Si-islands, we observe a superconducting transition of the used metal stacks and radio frequency (RF) signal transfer through the bump connection with negligible attenuation. In time-domain spectroscopy of the qubits we find high yield qubit excitation with energy relaxation times of up to 15 us.
Developing fault-tolerant quantum processors with error correction demands large arrays of physical qubits whose key performance metrics (coherence times, control fidelities) must remain within specifications over both short and long timescales. Here we investigated the temporal stability of subtractively fabricated CMOS-compatible superconducting transmon qubits. During a single cooldown and over a period of 95 hours, we monitored several parameters for 8 qubits, including coherence times T1T_1T1​ and T2∗T_2^*T2∗​, which exhibit fluctuations originating primarily from the interaction between two-level system (TLS) defects and the host qubit. We also demonstrate that subtractively-fabricated superconducting quantum devices align with the theoretical predictions that higher mean lifetimes T1T_1T1​ correspond to larger fluctuations. To assess long-term stability, we tracked two representative qubits over 10 cooldown cycles spanning more than one year. We observed an average total downward shift in both qubit transition frequencies of approximately 61 MHz within the thermal cycles considered. In contrast, readout resonator frequencies decreased only marginally. Meanwhile, T1T_1T1​ exhibits fluctuations from cycle to cycle, but maintains a stable baseline value.