Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2505.06165 · IEEE Computer Society Annual Symposium on VLSI

Optimization of Quantum Error Correcting Code under Temporal Variation of Qubit Quality

Subrata Das, Swaroop Ghosh

Published Jul 6, 2025• 3 citations
arXivHTMLPDF

Abstract

Error rates in current noisy quantum hardware are not static; they vary over time and across qubits. This temporal and spatial variation challenges the effectiveness of fixed-distance quantum error correction (QEC) codes. In this paper, we analyze 12 days of calibration data from IBM’s 127qubit device (ibm_kyiv), showing the fluctuation of Pauli-X and CNOT gate error rates. We demonstrate that fixed-distance QEC can either underperform or lead to excessive overhead, depending on the selected qubit and the error rate of the day. We then propose a simple adaptive QEC approach that selects an appropriate code distance per qubit, based on daily error rates. Using logical error rate modeling, we identify qubits that cannot be used and qubits that can be recovered with minimal resources. Our method avoids unnecessary resource overhead by excluding outlier qubits and tailoring code distances. Across 12 calibration days on ibm_kyiv, our adaptive strategy reduces physical qubit overhead by over 50% per logical qubit while maintaining access to $\mathbf{8 5 - 1 0 0 \%}$ of usable physical qubits. To further validate the method, we repeat the experiment on two additional 127qubit devices, ibm_brisbane and ibm_sherbrooke, where the overhead savings reach up to 71% while still preserving over 80% physical qubit usability. This approach offers a practical and efficient path forward for Noisy Intermediate-Scale Quantum (NISQ)-era QEC strategies.

DOI
10.1109/isvlsi65124.2025.11130303

Related papers

Limitations of quantum error correction in noisy intermediatescale quantum (nisq) systems

Saif Saad Alnuaimi, B. Bazeer Ahamed, Mustafa Mohammed Rashid Al-Nuaimi

Study of the Issue Quantum error correction (QEC) is crucial yet incurs significant qubit overhead costs. The current QEC codes lack sufficient efficiency for near-term devices. The current generation of NISQ devices, which often rely on delicate nanostructured qubit architectures, is prone to noise, decoherence, and gate faults, which severely limit their computing capability and scalability. While traditional quantum error correction codes, such as the surface code, are theoretically resilient, they often require significant qubit overhead and complex management systems that exceed the hardware capabilities of NISQ-era devices. This raises the question of whether new, resource-efficient QEC strategies or hybrid error mitigation approaches can be tailored to the limits of nanostructured NISQ designs. This document examines the constraints of existing quantum error correction (QEC) codes, which are crucial for preserving the fidelity of quantum computations yet require substantial qubit resources. This study examines the shortcomings of current Quantum Error Correction (QEC) codes in relation to Noisy Intermediate-Scale Quantum (NISQ) devices and explores alternative strategies to create more efficient, low-overhead QEC frameworks appropriate for imminent quantum technologies.

Experimental and Theoretical NANOTECHNOLOGY•Jan 14, 2026•3 citations

Low-Overhead Quantum Error Correction Codes for Noisy Intermediate-Scale Quantum Devices

D. Jagadeesan, A. B. Manju, G. Asha +4 more

Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.

•Mar 23, 2026•0 citations

Low-Overhead Quantum Error Correction Codes for Noisy Intermediate-Scale Quantum Devices

D. Jagadeesan, A. B. Manju, G. Asha +4 more

Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.

EPJ Web of Conferences•Jan 1, 2026•0 citations

The Complexity Bottleneck: Experimental Evaluation of 3-Qubit and 5-Qubit Error Correction Codes in the NISQ Era

Fayza Azmin Ishra, Jayakumari Chitathukattle

Quantum computing uses qubit superposition and entanglement to solve problems that a classical system cannot handle, and transformative applications include cryptography, drug discovery, finance, and artificial intelligence. However, quantum decoherence, a loss of quantum information to the noise in the environment is one of the critical limitations to the trustworthy quantum computation. In this paper, experimental research is carried out to determine the effectiveness of quantum error correction (QEC) codes to alleviate decoherence in noisy intermediate-scale quantum (NISQ) hardware. Through a five-phase experimental structure we initially prepare, and measure entangled Bell pairs as a reference quantum resource, decoherence and its resulting information loss are later measured and finally two different QEC schemes 3 qubits, the bit flip code and the more intricate 5 qubit code which can correct any one qubit error are carried out. By using simulated noise models which represented realistic IBM processor behavior, the results showed that QEC codes amplified instead of reduced logical errors. The unprotected error rate of 0.7% increased to 5.4% with the 3 -qubit code and by a huge margin to 52.0% with the 5-qubit code. These counterintuitive findings suggest a serious bottleneck in the NISQ generation; the extra gates needed to do the error correction add more cumulative noise than the codes can fix. This overhead was disproportionately experienced by the 5-qubit code, even though the code had better theoretical protection, showing that raw coding capacity is inadequate unless hardware aware design is used. This research offers empirical measurement of the QEC constraints, determines the overhead bottleneck issue, and offers a repeatable framework of systematic analysis. The results point to the need to co-develop hardware-efficient encoding and enhanced qubit stability to move towards fault-tolerant quantum computation.

MEC International Conference on Big Data and Smart City (ICBDSC)•Apr 1, 2026•0 citations

Adaptive Quantum Error Mitigation Using Machine Learning in Noisy Intermediate-Scale Quantum Systems

Jefin Rojar J, R. Haribaskar, Nithya Jayakumar +1 more

Quantum computing offers exponential advantages for problems in cryptography, optimization, and quantum simulation, yet the practicality of current Noisy Intermediate-Scale Quantum (NISQ) devices is severely constrained by decoherence, gate imperfections, and measurement noise. Conventional quantum error correction (QEC) codes such as Steane and surface codes impose large qubit overheads and require high-fidelity logical operations, making them unsuitable for near-term hardware. To address this gap, this work introduces ML-QEM, an adaptive quantum error mitigation framework that employs machine learning to identify and correct dominant Pauli error patterns in real time using only 3–5 ancillary qubits. By integrating Qiskit Aer noise modeling with a lightweight TensorFlow-based classifier, ML-QEM learns device-specific noise characteristics and applies targeted recovery operations with minimal latency. Evaluations across depolarizing, amplitude damping, and thermal relaxation noise models demonstrate a 28.4% average fidelity improvement, 60–84% lower overhead than Steane and surface codes, and a classical processing delay of only 21.7 ms. ML-QEM thus provides an effective and resource-efficient pathway toward enhancing quantum computation fidelity in the NISQ era.

International Conference on Computational Intelligence in Data Science (ICCIDS)•Jan 8, 2026•0 citations

QEC-C 2: Adaptive-Scaling Quantum Error Correction for NISQ Systems

Caspian, Ethan A.

QEC-C 2: Adaptive-Scaling Quantum Error Correction for NISQ Systems QEC-C 2 is a low-power quantum error correction framework tailored to noisy intermediate-scale quantum (NISQ) devices, in which the strength of error protection adapts dynamically to the observed noise environment. Instead of operating at a fixed code distance and fixed-cycle syndrome extraction rate, QEC-C 2 maintains an online estimate of effective noise strength and modulates the frequency and intensity of checks according to an exponential gain law beta_star(n) = A * exp(alpha n). This adaptive scaling allows near-exponential improvements in logical coherence time while keeping ancilla counts, measurement load, and classical processing within NISQ-compatible limits. Using filter-function analysis and Monte Carlo error-tracking with mixed local, correlated, and collective noise, we show that QEC-C 2 can raise effective fault-tolerance thresholds by factors of order five to six relative to unoptimized repetition-code baselines. The scheme interpolates between dynamical decoupling and full fault-tolerant quantum error correction, providing a practical pathway for stepwise protection on current hardware and a natural benchmark for comparing deterministic open-loop protocols such as Q-Loop.

•Nov 15, 2025•0 citations
Error rates in current noisy quantum hardware are not static; they vary over time and across qubits. This temporal and spatial variation challenges the effectiveness of fixed-distance quantum error correction (QEC) codes. In this paper, we analyze 12 days of calibration data from IBM’s 127qubit device (ibm_kyiv), showing the fluctuation of Pauli-X and CNOT gate error rates. We demonstrate that fixed-distance QEC can either underperform or lead to excessive overhead, depending on the selected qubit and the error rate of the day. We then propose a simple adaptive QEC approach that selects an appropriate code distance per qubit, based on daily error rates. Using logical error rate modeling, we identify qubits that cannot be used and qubits that can be recovered with minimal resources. Our method avoids unnecessary resource overhead by excluding outlier qubits and tailoring code distances. Across 12 calibration days on ibm_kyiv, our adaptive strategy reduces physical qubit overhead by over 50% per logical qubit while maintaining access to 85−100%\mathbf{8 5 - 1 0 0 \%}85−100% of usable physical qubits. To further validate the method, we repeat the experiment on two additional 127qubit devices, ibm_brisbane and ibm_sherbrooke, where the overhead savings reach up to 71% while still preserving over 80% physical qubit usability. This approach offers a practical and efficient path forward for Noisy Intermediate-Scale Quantum (NISQ)-era QEC strategies.
Study of the Issue Quantum error correction (QEC) is crucial yet incurs significant qubit overhead costs. The current QEC codes lack sufficient efficiency for near-term devices. The current generation of NISQ devices, which often rely on delicate nanostructured qubit architectures, is prone to noise, decoherence, and gate faults, which severely limit their computing capability and scalability. While traditional quantum error correction codes, such as the surface code, are theoretically resilient, they often require significant qubit overhead and complex management systems that exceed the hardware capabilities of NISQ-era devices. This raises the question of whether new, resource-efficient QEC strategies or hybrid error mitigation approaches can be tailored to the limits of nanostructured NISQ designs. This document examines the constraints of existing quantum error correction (QEC) codes, which are crucial for preserving the fidelity of quantum computations yet require substantial qubit resources. This study examines the shortcomings of current Quantum Error Correction (QEC) codes in relation to Noisy Intermediate-Scale Quantum (NISQ) devices and explores alternative strategies to create more efficient, low-overhead QEC frameworks appropriate for imminent quantum technologies.
Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.
Noisy Intermediate-Scale Quantum (NISQ) devices represent current quantum computing technology with 50-1000 qubits operating without comprehensive fault-tolerant error correction. The fundamental challenge lies in balancing error correction necessity against prohibitive resource overhead. Conventional quantum error correction codes require 10:1 to 1000:1 qubit ratios and syndrome extraction circuits exceeding 50 gates, consuming entire NISQ capacities. This work presents a comprehensive low-overhead quantum error correction framework specifically designed for NISQ constraints. Our approach combines three elements: optimised stabiliser codes which get qubit ratios of 3:1 to 10:1, adaptive syndrome extraction which works with circuits with less than 20 gates and machine learning-enhanced decoding which is specific to the noise profiles of the hardware. Experimental validation on IBM Quantum (127- qubit Eagle), IonQ trapped-ion systems, and Google Sycamore simulation demonstrates successful quantum state protection achieving 2.7× error suppression with 60% overhead reduction versus conventional surface codes. The proposed code achieves logical error rates of 0.0065 using only 10 physical qubits compared to 25 qubits for equivalent surface codes. Machine learning decoder attains 94.3% accuracy with 12-microsecond inference latency, enabling real-time error correction. Break-even performance achieved at 0.8% physical error rates establishes practical pathways for near-term quantum advantage in variational algorithms and quantum simulation applications.
Quantum computing uses qubit superposition and entanglement to solve problems that a classical system cannot handle, and transformative applications include cryptography, drug discovery, finance, and artificial intelligence. However, quantum decoherence, a loss of quantum information to the noise in the environment is one of the critical limitations to the trustworthy quantum computation. In this paper, experimental research is carried out to determine the effectiveness of quantum error correction (QEC) codes to alleviate decoherence in noisy intermediate-scale quantum (NISQ) hardware. Through a five-phase experimental structure we initially prepare, and measure entangled Bell pairs as a reference quantum resource, decoherence and its resulting information loss are later measured and finally two different QEC schemes 3 qubits, the bit flip code and the more intricate 5 qubit code which can correct any one qubit error are carried out. By using simulated noise models which represented realistic IBM processor behavior, the results showed that QEC codes amplified instead of reduced logical errors. The unprotected error rate of 0.7% increased to 5.4% with the 3 -qubit code and by a huge margin to 52.0% with the 5-qubit code. These counterintuitive findings suggest a serious bottleneck in the NISQ generation; the extra gates needed to do the error correction add more cumulative noise than the codes can fix. This overhead was disproportionately experienced by the 5-qubit code, even though the code had better theoretical protection, showing that raw coding capacity is inadequate unless hardware aware design is used. This research offers empirical measurement of the QEC constraints, determines the overhead bottleneck issue, and offers a repeatable framework of systematic analysis. The results point to the need to co-develop hardware-efficient encoding and enhanced qubit stability to move towards fault-tolerant quantum computation.
Quantum computing offers exponential advantages for problems in cryptography, optimization, and quantum simulation, yet the practicality of current Noisy Intermediate-Scale Quantum (NISQ) devices is severely constrained by decoherence, gate imperfections, and measurement noise. Conventional quantum error correction (QEC) codes such as Steane and surface codes impose large qubit overheads and require high-fidelity logical operations, making them unsuitable for near-term hardware. To address this gap, this work introduces ML-QEM, an adaptive quantum error mitigation framework that employs machine learning to identify and correct dominant Pauli error patterns in real time using only 3–5 ancillary qubits. By integrating Qiskit Aer noise modeling with a lightweight TensorFlow-based classifier, ML-QEM learns device-specific noise characteristics and applies targeted recovery operations with minimal latency. Evaluations across depolarizing, amplitude damping, and thermal relaxation noise models demonstrate a 28.4% average fidelity improvement, 60–84% lower overhead than Steane and surface codes, and a classical processing delay of only 21.7 ms. ML-QEM thus provides an effective and resource-efficient pathway toward enhancing quantum computation fidelity in the NISQ era.
QEC-C 2: Adaptive-Scaling Quantum Error Correction for NISQ Systems QEC-C 2 is a low-power quantum error correction framework tailored to noisy intermediate-scale quantum (NISQ) devices, in which the strength of error protection adapts dynamically to the observed noise environment. Instead of operating at a fixed code distance and fixed-cycle syndrome extraction rate, QEC-C 2 maintains an online estimate of effective noise strength and modulates the frequency and intensity of checks according to an exponential gain law beta_star(n) = A * exp(alpha n). This adaptive scaling allows near-exponential improvements in logical coherence time while keeping ancilla counts, measurement load, and classical processing within NISQ-compatible limits. Using filter-function analysis and Monte Carlo error-tracking with mixed local, correlated, and collective noise, we show that QEC-C 2 can raise effective fault-tolerance thresholds by factors of order five to six relative to unoptimized repetition-code baselines. The scheme interpolates between dynamical decoupling and full fault-tolerant quantum error correction, providing a practical pathway for stepwise protection on current hardware and a natural benchmark for comparing deterministic open-loop protocols such as Q-Loop.