Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.20572 · Nature Electronics

Single-shot in situ readout of a spin qubit unit cell

Pierre Hamonic, Mathieu Toubeix, G. Haas, Jayshankar Nath, Matthieu Dartiailh, Biel Martínez, Benoît Bertrand, Heimanu Niebojewski, M. Vinet, Christopher Bäuerle, Franck Balestro, Tristan Meunier, Matias Urdampilleta

Published Jun 17, 2026• 6 citations
arXivHTMLPDF

Abstract

Abstract Spin qubits based on semiconductor quantum dots can offer high coherence times and gate fidelities, and are a potential platform for quantum computation. However, scaling up the number of qubits to the level required for fault-tolerant quantum computing is challenging and will require single-shot, low-footprint qubit readout. Here we report single-shot readout of a spin qubit unit cell using in situ dispersive readout. Our compact, foundry-fabricated unit cell is composed of two electron spins with a controllable exchange interaction, and with it we demonstrate initialization, single-shot readout and a two-electron entangling gate. From exchange oscillations, we extract a spin visibility of 80.7(8)% in the coherent control of a qubit, despite a relatively small lever arm to the resonator gate (less than 0.15(5) eV V −1 ). We show that the unit cell can be operated at up to 1 K with low charge noise levels, extracted using free induction decay.

DOI
10.1038/s41928-026-01654-9

Related papers

Industry-compatible silicon spin-qubit unit cells exceeding 99% fidelity

Paul Steinacker, Nard Dumoulin Stuyck, Wee Han Lim +26 more

Abstract Among the many types of qubit presently being investigated for a future quantum computer, silicon spin qubits with millions of qubits on a single chip are uniquely positioned to enable quantum computing. However, it has not been clear whether the outstanding high-fidelity operations and long coherence times shown by silicon spin qubits fabricated in academic settings 1–8 can be reliably reproduced when the qubits are manufactured in a semiconductor foundry 9–11 . Here we show precise qubit operation of silicon two-qubit devices made with standard semiconductor tooling in a 300-mm foundry environment. Of the key metrics, single- and two-qubit control fidelities exceed 99% for all four devices, and the state preparation and measurement fidelities reach up to 99.9%, as evidenced by gate set tomography. We report spin lifetime and coherence up to T 1 = 9.5 s, $${T}_{2}^{* }=40.6\,{\rm{\mu }}{\rm{s}}$$ T 2 * = 40.6 μ s and $${T}_{2}^{{\rm{Hahn}}}=1.9\,{\rm{ms}}$$ T 2 Hahn = 1.9 ms . We determine that residual nuclear spin-carrying isotopes contribute substantially to operational errors, identifying further isotopic purification as a clear pathway to even higher performance.

arXiv:2410.15590•Nature•Sep 24, 2025•115 citations

Resonator-based Hole Spin Qubit Readout

Eoin G. Kelly

Spin qubits in gate-defined semiconductor quantum dots are a promising platform for realising a scalable quantum computer. This platform encodes quantum information into the intrinsic angular momentum (spin) of individual electrons or holes. In particular, hole spins in quantum dots enable the possibility of all-electrical spin control due to their intrinsic spin-orbit coupling. One important criterion of a quantum computer is the ability to reliably read out the state of the qubit. This is done by mapping spin information to the charge degree of freedom, combined with a method for charge detection. Charge detection can be facilitated by coupling a resonator directly to the quantum dot gate or to a charge sensor and measuring the resonator's phase or amplitude response. In this thesis, we describe a set of experiments relating to the implementation of hole spin qubit readout with superconducting resonators. First, we study gate-based charge sensing in a Si fin field-effect transistor (finFET) device using a superconducting NbN nanowire resonator. We find that the resonator amplifies capacitive crosstalk when electrical control pulses are applied to gate electrodes in this device. This occurs whenever a spectral component of qubit control pulses overlaps with the resonance frequency, which we show may occur for both baseband and radio-frequency (RF) drive signals. We quantify this crosstalk in a transport-based method, and attribute its source to the capacitance between the bondpads of neighbouring gate electrodes. In a second experiment, we use an RF charge sensor with the same nanowire technology to read out hole spin qubits formed in the quantum well of a Ge/SiGe heterostructure. A screening layer approach is used to facilitate RF matching due to large RF dissipation found in the heterostructure. We implement a double-latched readout scheme in this system to reduce errors arising from both spin and charge decay during readout. The spin-to-charge conversion process and its dependence on magnetic field orientation is studied. Spin and charge decay processes arising after spin-to-charge conversion are mitigated by choosing an optimal working point for the field orientation, field amplitude and readout pulse times. By doing so, we achieve an average single-shot state-preparation-and-measurement fidelity of 97%, primarily bounded by imperfect state preparation and limited signal-to-noise ratio. Finally, we study coplanar waveguide resonators fabricated from NbN. We investigate the feasibility of integrating this type of resonator onto the same chip as the Si finFET quantum dots. We then develop a novel resonator readout technique by the interference of two microwave sidebands. We demonstrate the insensitivity of this technique to common-mode phase and amplitude noise both theoretically and experimentally. This technique is then used to study resonator noise arising from two-level system defects. These results highlight both the practical constraints and the potential for achieving high readout fidelities using resonator-based hole spin qubit readout. This work establishes a blueprint for mitigating resonator-induced crosstalk and enabling high-fidelity readout in lossy materials by incorporating a screening layer.

•Jan 1, 2025•0 citations

Free spin quantum computation with semiconductor nanostructures

Weimin Zhang, Yin‐Zhong Wu, Chopin Soo

Taking the excess electron spin in a unit cell of semiconductor multiple quantum-dot structure as a qubit, we can implement scalable quantum computation without resorting to spin-spin interactions. The technique of single electron tunnelings and the structure of quantum-dot cellular automata (QCA) are used to create a charge entangled state of two electrons which is then converted into spin entanglement states by using single spin rotations. Deterministic two-qubit quantum gates can also be manipulated using only single spin rotations with help of QCA. A single-short read-out of spin states can be realized by coupling the unit cell to a quantum point contact.

arXiv:quant-ph/0502002•Feb 1, 2005•2 citations

Circuit Quantum Electrodynamics with Single Electron Spins in Silicon

Guoji Zheng

This dissertation describes a set of experiments with the goal of creating a super-conductor-semiconductor hybrid circuit quantum electrodynamics architecture with single electron spins. Single spins in silicon quantum dots have emerged as attractive qubits for quantum computation. However, how to scale up spin qubit systems remains an open question. The hybrid architecture considered here could provide a route to realizing large networks of quantum dot–based spin qubit registers. The first experiment in this thesis is aimed at achieving strong coupling between a single electron spin and a single microwave photon. The electron is trapped in a gate-defined double quantum dot in a Si/SiGe heterostructure and the photon is stored in an on-chip superconducting high-impedance NbTiN cavity. The photon is coupled directly to the electron charge, and indirectly to the electron spin, mediated through a synthetic spin-orbit field. We observe a vacuum Rabi splitting that depends on the spin-charge hybridization. The ratio of spin-photon coupling strength to decoherence rates of the spin and cavity combined is larger than unity, confirming the strong coupling regime has been reached. In addition, we find an optimal degree of spin-charge hybridization for which this ratio is maximized. The demonstration of strong spin-photon coupling not only opens a new range of physics experiments, but fulfills also a crucial requirement for coupling spin qubits at a distance via a cavity. The second experiment is focused on spin readout with the on-chip cavity. Instead of the direct dispersive readout of a single spin, we use the cavity to detect whether the electron is allowed to tunnel between the two dots or not. We benchmark the charge sensitivity and bandwidth of the detector and find that rapid detection of the electron charge with high SNR is possible. In the two-electron regime, electron tunneling is contingent on the total spin state (Pauli spin blockade). This spin-to-charge conversion scheme enables single-shot detection of singlet states with high-fidelity. The demonstration of single-shot spin readout with a cavity is an essential step towards readout in dense spin qubit arrays, such as the crossbar network, where it is not possible to integrate electrometers and accompanying reservoirs adjacent to the qubit dots. In the third experiment, we develop on-chip microwave filters to suppress microwave photon leakage from the cavity through the gate electrodes that are necessary to form quantum dots. We introduce a new cavity design that is compatible with long-distance connectivity between spins, but is also more susceptible to microwave leakage. We test and compare two low-pass filter variations in terms of performance, footprint and integrability. They use the same nanowire inductor, but different implementations of the capacitor: one with a planar interdigitated capacitor and one novel design with an overlapping thin-film capacitor. We find that both approaches are effective against microwave leakage. However, the large footprint of the interdigitated capacitor makes this solution inconvenient as the number of gate lines increases. The thin-film capacitor, with its much smaller footprint, is better suited for our devices. The final part of this dissertation contains concluding remarks and possible future directions are proposed.

•Jan 27, 2021•1 citation

High-fidelity entangling gate for double-quantum-dot spin qubits

John M. Nichol, Lucas Orona, Shannon P. Harvey +4 more

Abstract Electron spins in semiconductors are promising qubits because their long coherence times enable nearly 10 9 coherent quantum gate operations. However, developing a scalable high-fidelity two-qubit gate remains challenging. Here, we demonstrate an entangling gate between two double-quantum-dot spin qubits in GaAs by using a magnetic field gradient between the two dots in each qubit to suppress decoherence due to charge noise. When the magnetic gradient dominates the voltage-controlled exchange interaction between electrons, qubit coherence times increase by an order of magnitude. Using randomized benchmarking, we measure single-qubit gate fidelities of ~ 99%, and through self-consistent quantum measurement, state, and process tomography, we measure an entangling gate fidelity of 90%. In the future, operating double quantum dot spin qubits with large gradients in nuclear-spin-free materials, such as Si, should enable a two-qubit gate fidelity surpassing the threshold for fault-tolerant quantum information processing.

arXiv:1608.04258•npj Quantum Information•Jan 19, 2017•218 citations

Achieving quantum computation with quantum dot spin qubits

Sebastian Mehl, David Peter Divincenzo

A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.

•Jan 1, 2014•0 citations
Abstract Spin qubits based on semiconductor quantum dots can offer high coherence times and gate fidelities, and are a potential platform for quantum computation. However, scaling up the number of qubits to the level required for fault-tolerant quantum computing is challenging and will require single-shot, low-footprint qubit readout. Here we report single-shot readout of a spin qubit unit cell using in situ dispersive readout. Our compact, foundry-fabricated unit cell is composed of two electron spins with a controllable exchange interaction, and with it we demonstrate initialization, single-shot readout and a two-electron entangling gate. From exchange oscillations, we extract a spin visibility of 80.7(8)% in the coherent control of a qubit, despite a relatively small lever arm to the resonator gate (less than 0.15(5) eV V −1 ). We show that the unit cell can be operated at up to 1 K with low charge noise levels, extracted using free induction decay.
Abstract Among the many types of qubit presently being investigated for a future quantum computer, silicon spin qubits with millions of qubits on a single chip are uniquely positioned to enable quantum computing. However, it has not been clear whether the outstanding high-fidelity operations and long coherence times shown by silicon spin qubits fabricated in academic settings 1–8 can be reliably reproduced when the qubits are manufactured in a semiconductor foundry 9–11 . Here we show precise qubit operation of silicon two-qubit devices made with standard semiconductor tooling in a 300-mm foundry environment. Of the key metrics, single- and two-qubit control fidelities exceed 99% for all four devices, and the state preparation and measurement fidelities reach up to 99.9%, as evidenced by gate set tomography. We report spin lifetime and coherence up to T 1 = 9.5 s, T2∗=40.6 μs{T}_{2}^{* }=40.6\,{\rm{\mu }}{\rm{s}}T2∗​=40.6μs T 2 * = 40.6 μ s and T2Hahn=1.9 ms{T}_{2}^{{\rm{Hahn}}}=1.9\,{\rm{ms}}T2Hahn​=1.9ms T 2 Hahn = 1.9 ms . We determine that residual nuclear spin-carrying isotopes contribute substantially to operational errors, identifying further isotopic purification as a clear pathway to even higher performance.
Spin qubits in gate-defined semiconductor quantum dots are a promising platform for realising a scalable quantum computer. This platform encodes quantum information into the intrinsic angular momentum (spin) of individual electrons or holes. In particular, hole spins in quantum dots enable the possibility of all-electrical spin control due to their intrinsic spin-orbit coupling. One important criterion of a quantum computer is the ability to reliably read out the state of the qubit. This is done by mapping spin information to the charge degree of freedom, combined with a method for charge detection. Charge detection can be facilitated by coupling a resonator directly to the quantum dot gate or to a charge sensor and measuring the resonator's phase or amplitude response. In this thesis, we describe a set of experiments relating to the implementation of hole spin qubit readout with superconducting resonators. First, we study gate-based charge sensing in a Si fin field-effect transistor (finFET) device using a superconducting NbN nanowire resonator. We find that the resonator amplifies capacitive crosstalk when electrical control pulses are applied to gate electrodes in this device. This occurs whenever a spectral component of qubit control pulses overlaps with the resonance frequency, which we show may occur for both baseband and radio-frequency (RF) drive signals. We quantify this crosstalk in a transport-based method, and attribute its source to the capacitance between the bondpads of neighbouring gate electrodes. In a second experiment, we use an RF charge sensor with the same nanowire technology to read out hole spin qubits formed in the quantum well of a Ge/SiGe heterostructure. A screening layer approach is used to facilitate RF matching due to large RF dissipation found in the heterostructure. We implement a double-latched readout scheme in this system to reduce errors arising from both spin and charge decay during readout. The spin-to-charge conversion process and its dependence on magnetic field orientation is studied. Spin and charge decay processes arising after spin-to-charge conversion are mitigated by choosing an optimal working point for the field orientation, field amplitude and readout pulse times. By doing so, we achieve an average single-shot state-preparation-and-measurement fidelity of 97%, primarily bounded by imperfect state preparation and limited signal-to-noise ratio. Finally, we study coplanar waveguide resonators fabricated from NbN. We investigate the feasibility of integrating this type of resonator onto the same chip as the Si finFET quantum dots. We then develop a novel resonator readout technique by the interference of two microwave sidebands. We demonstrate the insensitivity of this technique to common-mode phase and amplitude noise both theoretically and experimentally. This technique is then used to study resonator noise arising from two-level system defects. These results highlight both the practical constraints and the potential for achieving high readout fidelities using resonator-based hole spin qubit readout. This work establishes a blueprint for mitigating resonator-induced crosstalk and enabling high-fidelity readout in lossy materials by incorporating a screening layer.
Taking the excess electron spin in a unit cell of semiconductor multiple quantum-dot structure as a qubit, we can implement scalable quantum computation without resorting to spin-spin interactions. The technique of single electron tunnelings and the structure of quantum-dot cellular automata (QCA) are used to create a charge entangled state of two electrons which is then converted into spin entanglement states by using single spin rotations. Deterministic two-qubit quantum gates can also be manipulated using only single spin rotations with help of QCA. A single-short read-out of spin states can be realized by coupling the unit cell to a quantum point contact.
This dissertation describes a set of experiments with the goal of creating a super-conductor-semiconductor hybrid circuit quantum electrodynamics architecture with single electron spins. Single spins in silicon quantum dots have emerged as attractive qubits for quantum computation. However, how to scale up spin qubit systems remains an open question. The hybrid architecture considered here could provide a route to realizing large networks of quantum dot–based spin qubit registers. The first experiment in this thesis is aimed at achieving strong coupling between a single electron spin and a single microwave photon. The electron is trapped in a gate-defined double quantum dot in a Si/SiGe heterostructure and the photon is stored in an on-chip superconducting high-impedance NbTiN cavity. The photon is coupled directly to the electron charge, and indirectly to the electron spin, mediated through a synthetic spin-orbit field. We observe a vacuum Rabi splitting that depends on the spin-charge hybridization. The ratio of spin-photon coupling strength to decoherence rates of the spin and cavity combined is larger than unity, confirming the strong coupling regime has been reached. In addition, we find an optimal degree of spin-charge hybridization for which this ratio is maximized. The demonstration of strong spin-photon coupling not only opens a new range of physics experiments, but fulfills also a crucial requirement for coupling spin qubits at a distance via a cavity. The second experiment is focused on spin readout with the on-chip cavity. Instead of the direct dispersive readout of a single spin, we use the cavity to detect whether the electron is allowed to tunnel between the two dots or not. We benchmark the charge sensitivity and bandwidth of the detector and find that rapid detection of the electron charge with high SNR is possible. In the two-electron regime, electron tunneling is contingent on the total spin state (Pauli spin blockade). This spin-to-charge conversion scheme enables single-shot detection of singlet states with high-fidelity. The demonstration of single-shot spin readout with a cavity is an essential step towards readout in dense spin qubit arrays, such as the crossbar network, where it is not possible to integrate electrometers and accompanying reservoirs adjacent to the qubit dots. In the third experiment, we develop on-chip microwave filters to suppress microwave photon leakage from the cavity through the gate electrodes that are necessary to form quantum dots. We introduce a new cavity design that is compatible with long-distance connectivity between spins, but is also more susceptible to microwave leakage. We test and compare two low-pass filter variations in terms of performance, footprint and integrability. They use the same nanowire inductor, but different implementations of the capacitor: one with a planar interdigitated capacitor and one novel design with an overlapping thin-film capacitor. We find that both approaches are effective against microwave leakage. However, the large footprint of the interdigitated capacitor makes this solution inconvenient as the number of gate lines increases. The thin-film capacitor, with its much smaller footprint, is better suited for our devices. The final part of this dissertation contains concluding remarks and possible future directions are proposed.
Abstract Electron spins in semiconductors are promising qubits because their long coherence times enable nearly 10 9 coherent quantum gate operations. However, developing a scalable high-fidelity two-qubit gate remains challenging. Here, we demonstrate an entangling gate between two double-quantum-dot spin qubits in GaAs by using a magnetic field gradient between the two dots in each qubit to suppress decoherence due to charge noise. When the magnetic gradient dominates the voltage-controlled exchange interaction between electrons, qubit coherence times increase by an order of magnitude. Using randomized benchmarking, we measure single-qubit gate fidelities of ~ 99%, and through self-consistent quantum measurement, state, and process tomography, we measure an entangling gate fidelity of 90%. In the future, operating double quantum dot spin qubits with large gradients in nuclear-spin-free materials, such as Si, should enable a two-qubit gate fidelity surpassing the threshold for fault-tolerant quantum information processing.
A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.