Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.16314 · Physical Review Applied

Photolithography-compatible three-terminal superconducting switch for driving CMOS loads

Dip Joti Paul, Tony X. Zhou, Karl K. Berggren

Published Jul 28, 2025• 2 citations
arXivHTMLPDF

Abstract

Superconducting devices have enabled breakthrough performance in quantum sensing and ultralow-power computing. Nevertheless, the need for a cryoelectronics platform that can interface superconductor electronics with complementary metal-oxide-semiconductor (CMOS) devices has become increasingly evident in many cutting-edge applications. In this work, we present a three-terminal micrometer-wide superconducting-wire-based cryotron switch (wTron), fabricated using photolithography, that can directly interface with CMOS electronics. The wTron features an output impedance exceeding $1\phantom{\rule{0.2em}{0ex}}\mathrm{k}\mathrm{\ensuremath{\Omega}}$ and exhibits reduced sensitivity to ambient magnetic noise, similar to its nanoscale predecessor, the nanocryotron. In addition, its micrometer-wide wires support switching currents in the milliamp range, making it well suited to driving current-hungry resistive loads and highly capacitive CMOS loads. We demonstrate this capability by using the wTron to drive room-temperature CMOS electronics, including a light-emitting diode and a metal-oxide-semiconductor field-effect transistor (MOSFET) with a gate capacitance of 500 pF. We then examine the optimal design parameters required for wTrons to drive CMOS loads, such as MOSFETs, high-electron mobility transistors, and electro-optic modulators. Furthermore, to demonstrate the foundry readiness of the wTron, we fabricate wTrons using MIT Lincoln Laboratory's SFQ5ee superconducting process and characterize their switching behavior. Our work shows that the wTron will facilitate the interface between superconductor electronics and CMOS devices, thereby paving the way for the development of foundry-compatible cryoelectronic ecosystems to advance next-generation computing and quantum applications.

DOI
10.1103/261b-37xx

Related papers

Advanced CMOS manufacturing of superconducting qubits on 300 mm wafers

Jacques Van Damme, Shana Massar, R. Acharya +13 more

Abstract The development of superconducting qubit technology has shown great potential for the construction of practical quantum computers 1,2 . As the complexity of quantum processors continues to grow, the need for stringent fabrication tolerances becomes increasingly critical 3 . Utilizing advanced industrial fabrication processes could facilitate the necessary level of fabrication control to support the continued scaling of quantum processors. However, at present, these industrial processes are not optimized to produce high-coherence devices, nor are they a priori compatible with the approaches commonly used to make superconducting qubits. Here we demonstrate superconducting transmon qubits manufactured in a 300 mm complementary metal–oxide–semiconductor (CMOS) pilot line using industrial fabrication methods, with resulting relaxation and coherence times exceeding 100 μs. We show across-wafer, large-scale statistics of coherence, yield, variability and ageing that confirm the validity of our approach. The presented industry-scale fabrication process, which uses only optical lithography and reactive-ion etching, has a performance and yield in line with conventional laboratory-style techniques utilizing metal lift-off, angled evaporation and electron-beam writing 4 . Moreover, it offers the potential for further upscaling through three-dimensional integration 5 and more process optimization. This result marks the advent of an alternative and new, large-scale, truly CMOS-compatible fabrication method for superconducting quantum computing processors.

arXiv:2403.01312•Nature•Sep 18, 2024•89 citations

A nanocryotron comparator can connect single-flux-quantum circuits to conventional electronics

Qingyuan Zhao, Adam N. McCaughan, Andrew E. Dane +2 more

Abstract Integration with conventional electronics offers a straightforward and economical approach to upgrading existing superconducting technologies, such as scaling up superconducting detectors into large arrays and combining single flux quantum (SFQ) digital circuits with semiconductor logic gates and memories. However, direct output signals from superconducting devices (e.g., Josephson junctions) are usually not compatible with the input requirements of conventional devices (e.g., transistors). Here, we demonstrate the use of a single three-terminal superconducting-nanowire device, called the nanocryotron (nTron), as a digital comparator to combine SFQ circuits with mature semiconductor circuits such as complementary metal oxide semiconductor (CMOS) circuits. Since SFQ circuits can digitize output signals from general superconducting devices and CMOS circuits can interface existing CMOS-compatible electronics, our results demonstrate the feasibility of a general architecture that uses an nTron as an interface to realize a ‘super-hybrid’ system consisting of superconducting detectors, superconducting quantum electronics, CMOS logic gates and memories, and other conventional electronics.

arXiv:1610.09349•Superconductor Science and Technology•Feb 8, 2017•61 citations

Multiplexed superconducting qubit control at millikelvin temperatures with a low-power cryo-CMOS multiplexer

R. Acharya, S. Brebels, Alexander Grill +14 more

Abstract Large-scale superconducting quantum computing systems entail high-fidelity control and readout of large numbers of qubits at millikelvin temperatures, resulting in a massive input-output bottleneck. Cryo-electronics, based on complementary metal-oxide-semiconductor (CMOS) technology, may offer a scalable and versatile solution to overcome this bottleneck. However, detrimental effects due to cross-coupling between the electronic and thermal noise generated during cryo-electronics operation and the qubits need to be avoided. Here we present an ultra-low power radio-frequency (RF) multiplexing cryo-electronics solution operating below 15 mK that allows for control and interfacing of superconducting qubits with minimal cross-coupling. We benchmark its performance by interfacing it with a superconducting qubit and observe that the qubit’s relaxation times (T1) are unaffected, while the coherence times (T2) are only minimally affected in both static and dynamic operation. Using the multiplexer, single qubit gate fidelities above 99.9%, i.e., well above the threshold for surface-code based quantum error-correction, can be achieved with appropriate thermal filtering. In addition, we demonstrate the capability of time-division-multiplexed qubit control by dynamically windowing calibrated qubit control pulses. Our results show that cryo-CMOS multiplexers could be used to significantly reduce the wiring resources for large-scale qubit device characterization, large-scale quantum processor control and quantum error correction protocols.

arXiv:2209.13060•Nature Electronics•Sep 25, 2023•70 citations

CMOS-compatible processing and room-temperature characterization at the wafer level for scalable quantum computing

Simon Lang, T. Mayer, Johannes Weber +10 more

We report on an industry-grade complementary metal-oxide semiconductor (CMOS)-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices that reaches 92.8%, with a resistance spread evaluated across the full wafer 200 mm in diameter of 12.4% and relaxation times ${T}_{1}$ approaching $80\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. Furthermore, we conducted a comprehensive analysis of wafer-scale room-temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low-temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1% and oxide barrier variation of 7.2% was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived at the wafer level by applying the Ambegaokar-Baratoff model before making low-temperature measurements. This sets the stage for precooldown wafer-level JJ evaluation and sorting. In particular, such early device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, this enables the fabrication of large multichip quantum systems in the future. Our analysis highlights the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.

arXiv:2504.18173•Physical Review Applied•Nov 18, 2025•5 citations

Reconfigurable Superconducting Logic for On-Chip Photon Coincidence Detection

Gabriel Le Guay, Matteo Castellani, Reed A. Foster +5 more

Scaling photonic quantum-information platforms requires arrays of superconducting nanowire single-photon detectors (SNSPDs) for feedforward control, in which optical operations are conditioned on Bell-state measurements relying on photon-coincidence detections. On-chip superconducting cryotron electronics, performing logic on detector outputs and driving optical modulators, could reduce latency and room-temperature interconnect complexity for feedforward schemes. To date, no cryotron circuits designed for this purpose have been demonstrated. We demonstrate a bias-programmable logic gate based on three nanocryotrons (nTrons) that implements selectable AND (coincidence), XOR (odd-parity), and OR functions. It operates on two electrical pulses at 4.2 K, with bit-error rates below $10^{-3}$, bias margins up to $\pm21.7\%$, and operation extending to 25 MHz over narrower bias windows. It performs coincidence and odd-parity detection on two SNSPDs' outputs with bit-error rates below $3.2 \times 10^{-2}$. As proof-of-concept, we show that nTrons can drive capacitive loads up to 1.15 V, potentially enabling compatibility with electro-optic modulators in feedforward schemes.

arXiv:2604.22101•Apr 23, 2026•1 citation

Transistors to transmons: large-scale cryogenic CMOS control of superconducting qubits

Devin Underwood

Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.

•Jul 3, 2026•0 citations
Superconducting devices have enabled breakthrough performance in quantum sensing and ultralow-power computing. Nevertheless, the need for a cryoelectronics platform that can interface superconductor electronics with complementary metal-oxide-semiconductor (CMOS) devices has become increasingly evident in many cutting-edge applications. In this work, we present a three-terminal micrometer-wide superconducting-wire-based cryotron switch (wTron), fabricated using photolithography, that can directly interface with CMOS electronics. The wTron features an output impedance exceeding 1k\ensuremathΩ1\phantom{\rule{0.2em}{0ex}}\mathrm{k}\mathrm{\ensuremath{\Omega}}1k\ensuremathΩ and exhibits reduced sensitivity to ambient magnetic noise, similar to its nanoscale predecessor, the nanocryotron. In addition, its micrometer-wide wires support switching currents in the milliamp range, making it well suited to driving current-hungry resistive loads and highly capacitive CMOS loads. We demonstrate this capability by using the wTron to drive room-temperature CMOS electronics, including a light-emitting diode and a metal-oxide-semiconductor field-effect transistor (MOSFET) with a gate capacitance of 500 pF. We then examine the optimal design parameters required for wTrons to drive CMOS loads, such as MOSFETs, high-electron mobility transistors, and electro-optic modulators. Furthermore, to demonstrate the foundry readiness of the wTron, we fabricate wTrons using MIT Lincoln Laboratory's SFQ5ee superconducting process and characterize their switching behavior. Our work shows that the wTron will facilitate the interface between superconductor electronics and CMOS devices, thereby paving the way for the development of foundry-compatible cryoelectronic ecosystems to advance next-generation computing and quantum applications.
Abstract The development of superconducting qubit technology has shown great potential for the construction of practical quantum computers 1,2 . As the complexity of quantum processors continues to grow, the need for stringent fabrication tolerances becomes increasingly critical 3 . Utilizing advanced industrial fabrication processes could facilitate the necessary level of fabrication control to support the continued scaling of quantum processors. However, at present, these industrial processes are not optimized to produce high-coherence devices, nor are they a priori compatible with the approaches commonly used to make superconducting qubits. Here we demonstrate superconducting transmon qubits manufactured in a 300 mm complementary metal–oxide–semiconductor (CMOS) pilot line using industrial fabrication methods, with resulting relaxation and coherence times exceeding 100 μs. We show across-wafer, large-scale statistics of coherence, yield, variability and ageing that confirm the validity of our approach. The presented industry-scale fabrication process, which uses only optical lithography and reactive-ion etching, has a performance and yield in line with conventional laboratory-style techniques utilizing metal lift-off, angled evaporation and electron-beam writing 4 . Moreover, it offers the potential for further upscaling through three-dimensional integration 5 and more process optimization. This result marks the advent of an alternative and new, large-scale, truly CMOS-compatible fabrication method for superconducting quantum computing processors.
Abstract Integration with conventional electronics offers a straightforward and economical approach to upgrading existing superconducting technologies, such as scaling up superconducting detectors into large arrays and combining single flux quantum (SFQ) digital circuits with semiconductor logic gates and memories. However, direct output signals from superconducting devices (e.g., Josephson junctions) are usually not compatible with the input requirements of conventional devices (e.g., transistors). Here, we demonstrate the use of a single three-terminal superconducting-nanowire device, called the nanocryotron (nTron), as a digital comparator to combine SFQ circuits with mature semiconductor circuits such as complementary metal oxide semiconductor (CMOS) circuits. Since SFQ circuits can digitize output signals from general superconducting devices and CMOS circuits can interface existing CMOS-compatible electronics, our results demonstrate the feasibility of a general architecture that uses an nTron as an interface to realize a ‘super-hybrid’ system consisting of superconducting detectors, superconducting quantum electronics, CMOS logic gates and memories, and other conventional electronics.
Abstract Large-scale superconducting quantum computing systems entail high-fidelity control and readout of large numbers of qubits at millikelvin temperatures, resulting in a massive input-output bottleneck. Cryo-electronics, based on complementary metal-oxide-semiconductor (CMOS) technology, may offer a scalable and versatile solution to overcome this bottleneck. However, detrimental effects due to cross-coupling between the electronic and thermal noise generated during cryo-electronics operation and the qubits need to be avoided. Here we present an ultra-low power radio-frequency (RF) multiplexing cryo-electronics solution operating below 15 mK that allows for control and interfacing of superconducting qubits with minimal cross-coupling. We benchmark its performance by interfacing it with a superconducting qubit and observe that the qubit’s relaxation times (T1) are unaffected, while the coherence times (T2) are only minimally affected in both static and dynamic operation. Using the multiplexer, single qubit gate fidelities above 99.9%, i.e., well above the threshold for surface-code based quantum error-correction, can be achieved with appropriate thermal filtering. In addition, we demonstrate the capability of time-division-multiplexed qubit control by dynamically windowing calibrated qubit control pulses. Our results show that cryo-CMOS multiplexers could be used to significantly reduce the wiring resources for large-scale qubit device characterization, large-scale quantum processor control and quantum error correction protocols.
We report on an industry-grade complementary metal-oxide semiconductor (CMOS)-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices that reaches 92.8%, with a resistance spread evaluated across the full wafer 200 mm in diameter of 12.4% and relaxation times T1{T}_{1}T1​ approaching $80\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. Furthermore, we conducted a comprehensive analysis of wafer-scale room-temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low-temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1% and oxide barrier variation of 7.2% was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived at the wafer level by applying the Ambegaokar-Baratoff model before making low-temperature measurements. This sets the stage for precooldown wafer-level JJ evaluation and sorting. In particular, such early device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, this enables the fabrication of large multichip quantum systems in the future. Our analysis highlights the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.
Scaling photonic quantum-information platforms requires arrays of superconducting nanowire single-photon detectors (SNSPDs) for feedforward control, in which optical operations are conditioned on Bell-state measurements relying on photon-coincidence detections. On-chip superconducting cryotron electronics, performing logic on detector outputs and driving optical modulators, could reduce latency and room-temperature interconnect complexity for feedforward schemes. To date, no cryotron circuits designed for this purpose have been demonstrated. We demonstrate a bias-programmable logic gate based on three nanocryotrons (nTrons) that implements selectable AND (coincidence), XOR (odd-parity), and OR functions. It operates on two electrical pulses at 4.2 K, with bit-error rates below 10−310^{-3}10−3, bias margins up to ±21.7%\pm21.7\%±21.7%, and operation extending to 25 MHz over narrower bias windows. It performs coincidence and odd-parity detection on two SNSPDs' outputs with bit-error rates below 3.2×10−23.2 \times 10^{-2}3.2×10−2. As proof-of-concept, we show that nTrons can drive capacitive loads up to 1.15 V, potentially enabling compatibility with electro-optic modulators in feedforward schemes.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.