The n-time correlation function is pivotal for establishing connections between theoretical predictions and experimental observations of a quantum system. Conventional methods for computing n-time correlation functions on quantum computers, such as the Hadamard test, generally require an ancilla qubit that controls the entire system-an approach that poses challenges for digital quantum devices with limited qubit connectivity, as well as for analog quantum platforms lacking controlled operations. Here, we introduce a method to compute n-time correlation functions using only unitary evolutions on the system of interest, thereby eliminating the need for ancillas and the control operations. This approach substantially relaxes hardware connectivity requirements for digital processors and enables more practical measurements of n-time correlation functions on analog platforms. We demonstrate our protocol on IBM quantum hardware up to 12 qubits to measure the single-particle spectrum of the Schwinger model and the out-of-time-order correlator in the transverse-field Ising model. In the demonstration, we further introduce an error mitigation procedure based on signal processing that integrates signal filtering and correlation analysis, and successfully reproduces the noiseless simulation results from the noisy hardware. Our Letter highlights a route to exploring complex quantum many-body correlation functions in practice, even in the presence of realistic hardware limitations and noise.
The n-time correlation function is pivotal for establishing connections between theoretical predictions and experimental observations of a quantum system. Conventional methods for computing n-time correlation functions on quantum computers, such as the Hadamard test, generally require an ancilla qubit that controls the entire system-an approach that poses challenges for digital quantum devices with limited qubit connectivity, as well as for analog quantum platforms lacking controlled operations. Here, we introduce a method to compute n-time correlation functions using only unitary evolutions on the system of interest, thereby eliminating the need for ancillas and the control operations. This approach substantially relaxes hardware connectivity requirements for digital processors and enables more practical measurements of n-time correlation functions on analog platforms. We demonstrate our protocol on IBM quantum hardware up to 12 qubits to measure the single-particle spectrum of the Schwinger model and the out-of-time-order correlator in the transverse-field Ising model. In the demonstration, we further introduce an error mitigation procedure based on signal processing that integrates signal filtering and correlation analysis, and successfully reproduces the noiseless simulation results from the noisy hardware. Our Letter highlights a route to exploring complex quantum many-body correlation functions in practice, even in the presence of realistic hardware limitations and noise.
We propose and demonstrate a unified hierarchical method to measure n-point correlation functions that can be applied to driven, dissipative, or otherwise open or nonequilibrium quantum systems. In this method, the time evolution of the system is repeatedly interrupted by interacting an ancilla qubit with the system through a controlled operation, and measuring the ancilla immediately afterward. We discuss the robustness of this method as compared to other ancilla-based interferometric techniques (such as the Hadamard test), and highlight its advantages for near-term quantum simulations of open quantum systems. We implement the method on a quantum computer in order to measure single-particle Green's functions of a driven-dissipative fermionic system. This Letter shows that dynamical correlation functions for driven-dissipative systems can be robustly measured with near-term quantum computers.
Linear response theory and Green's functions provide a universal framework for understanding dynamical correlations in strongly correlated open quantum systems. While the theoretical foundation for non-Hermitian linear response has been recently established to describe dissipation and fluctuation-dissipation relations (FDR), generalizing these predictions onto practical quantum computers remains a formidable algorithmic challenge due to the intrinsically non-unitary nature of the dynamics. In this work, we present a systematic algorithmic framework that seamlessly transforms non-unitary multi-time correlation functions into a unitary form viable for digital quantum hardware. By mapping the vectorization of the Lindblad master equation into an expanded continuous-variable Liouville space, we employ the Schrödingerization technique to deterministically evaluate the non-Hermitian response. Furthermore, through hardware-aware simulations utilizing a 133-qubit device noise model, we demonstrate that our unitary framework robustly preserves the fundamental spectral information -- specifically the phase and oscillatory frequency -- against realistic depolarizing channels. By bypassing explicit non-unitary mid-circuit measurements, this approach intrinsically supports the integration of standard quantum error mitigation protocols, providing a scalable algorithmic blueprint for probing open-system universality on near-term hardware.
Abstract In the scale-up of quantum computers, the framework underpinning fault-tolerance generally relies on the strong assumption that environmental noise affecting qubit logic is uncorrelated (Markovian). However, as physical devices progress well into the complex multi-qubit regime, attention is turning to understanding the appearance and mitigation of correlated — or non-Markovian — noise, which poses a serious challenge to the progression of quantum technology. This error type has previously remained elusive to characterisation techniques. Here, we develop a framework for characterising non-Markovian dynamics in quantum systems and experimentally test it on multi-qubit superconducting quantum devices. Where noisy processes cannot be accounted for using standard Markovian techniques, our reconstruction predicts the behaviour of the devices with an infidelity of 10 −3 . Our results show this characterisation technique leads to superior quantum control and extension of coherence time by effective decoupling from the non-Markovian environment. This framework, validated by our results, is applicable to any controlled quantum device and offers a significant step towards optimal device operation and noise reduction.
Spectroscopy underpins modern scientific discovery across diverse disciplines. While experimental spectroscopy probes material properties through scattering or radiation measurements, computational spectroscopy combines theoretical models with experimental data to predict spectral properties, essential for advancements in physics, chemistry, and materials science. However, quantum systems present unique challenges for computational spectroscopy due to their inherent complexity, and current quantum algorithms remain largely limited to static and closed quantum systems. Here, we present and demonstrate a generalised quantum computational spectroscopy that lifts these limitations by reconstructing the quantum autocorrelation function via an ancilla-assisted Hadamard test quantum circuit. Our method is applicable to a broad range of quantum systems, including closed, open, and time-dependent driven quantum systems. We experimentally validate this approach, which leverages arbitrary controlled quantum dynamics and efficient classical noise-mitigation strategy, on a programmable silicon-photonic quantum processing chip, capable of high-fidelity time-evolution simulations. The versatility of our method is demonstrated through spectroscopic computations for diverse quantum systems, revealing novel phenomena such as parity-time symmetry breaking and topological holonomy that are inaccessible to conventional spectroscopy or quantum eigenstate algorithms. This work establishes a noise-robust methodology for quantum spectral analysis.
Quantum mechanical problems are among the hardest to simulate and, in some cases, remain intractable even for the most powerful computers. Quantum computing has emerged as a new technological platform to address such challenges, with rapid advances in recent years. Yet, current quantum devices remain noisy and limited in scale. Hence, it is essential to identify classically hard problems of practical interest and tractable with existing quantum devices. Among potential applications, the real-time simulation of quantum systems is one of the most promising to deliver an early, practical quantum advantage. This doctoral thesis is therefore centered around simulating quantum dynamics on quantum devices. We first present an overview of the most relevant quantum algorithms for quantum dynamics, highlighting respective advantages and limitations. Further, we identify relevant problems within quantum dynamics that could benefit from quantum simulation in the near future. Second, we propose a method for benchmarking hardware and error mitigation algorithms that is based on well-understood theoretical results and suffers from no scaling issues. The resulting quality metric is intuitive and transferable to other applications. We successfully implement the scheme on up to 133 qubits, demonstrating coherent evolution up to a two-qubit gate depth of 28, featuring 1396 two-qubit gates, before noise becomes prevalent. Third, we propose a novel variant of probabilistic error amplification to implement open quantum dynamics, relying on characterizing and altering hardware noise to mimic the system-environment interaction under study. Lastly, we present two studies on state preparation and phase classification: first, a hybrid algorithm to prepare ground states of electron-phonon systems; second, a quantum machine learning-based approach to distinguish phases in previously prepared quantum states.
Quantum error correction has been successfully applied to enhance the precision of parameter estimation in the presence of noise. Nonetheless, existing methods require a number of noiseless, controllable ancillae and lack efficient encoding and decoding procedures. In this Letter, we demonstrate that subsystem error correction provides a new direction that can substantially simplify the metrological protocol. We derive general conditions under which subsystem stabilizer codes achieve the Heisenberg limit and show that, for broad classes of noise, this can be realized by syndrome-free protocols using at most a single ancilla qubit. Furthermore, we extend this framework to dynamical error correction and show that Floquet codes can protect time-dependent metrological signals in reaching the Heisenberg limit.