We solve the Lindblad master equation for the quantum state of a pumped optomechanical system coupled to a thermal bath. We show that the solution to the state in the linear pumping regime is a beam-split thermal state when pumped on the red sideband of cavity resonance and a two-mode squeezed thermal state when pumped on the blue sideband. The time dependence of each state is fully described by four coupled differential equations. Using this formalism, we describe a process of first cooling the mechanical mode via the red-sideband pump, then entangling that mode using the blue-sideband pump. We find that there is an optimal strength of blue-sideband pumping to drive the correlation variance between the two modes below a desired threshold for a maximum amount of time. This optimal value depends both on the loss rates and equilibrium temperatures of the two modes, and we provide an approximate analytic expression for this relationship. We show that a long entanglement time is achievable, even at relatively high temperatures, as long as the optical loss rate is much higher than the mechanical one.
We solve the Lindblad master equation for the quantum state of a pumped optomechanical system coupled to a thermal bath. We show that the solution to the state in the linear pumping regime is a beam-split thermal state when pumped on the red sideband of cavity resonance and a two-mode squeezed thermal state when pumped on the blue sideband. The time dependence of each state is fully described by four coupled differential equations. Using this formalism, we describe a process of first cooling the mechanical mode via the red-sideband pump, then entangling that mode using the blue-sideband pump. We find that there is an optimal strength of blue-sideband pumping to drive the correlation variance between the two modes below a desired threshold for a maximum amount of time. This optimal value depends both on the loss rates and equilibrium temperatures of the two modes, and we provide an approximate analytic expression for this relationship. We show that a long entanglement time is achievable, even at relatively high temperatures, as long as the optical loss rate is much higher than the mechanical one.
We find the optimal initial states of a linearized cavity-optomechanical system for estimating the single-photon coupling by quantum Fisher information. In the red-detuned (beam-splitter) regime the interaction exchanges excitations between the two modes, and for pure inputs the Fisher information is four times the variance of the excitation-exchange operator, reducing the optimization to variance maximization with a closed-form solution. With the mechanical mode in a Fock state the probe is degenerate: any state saturating the photon-number constraint is optimal, and a Fock reference with many phonons enhances the per-photon sensitivity linearly. For an arbitrary fixed mechanical reference it becomes a phase-matched squeezed vacuum, from an exact bound on that coherence obtained by a Lagrange-dual argument. Jointly optimizing both modes at fixed total excitation number, the quantum Fisher information obeys a Heisenberg bound quadratic in the energy, saturated by equal superpositions of the two extremal eigenstates of the generator, equivalently a two-mode NOON state after a balanced beam splitter; balanced product Fock states reach only a linear enhancement. Exact diagonalization in truncated Fock spaces confirms all the results, the familiar single-photon input being the simplest saturating case. Three extensions are worked out: the blue sideband has an unbounded two-mode-squeezing spectrum, so the entangled optimum becomes impossible and the balanced product Fock state is exactly optimal at definite energy; under cavity loss the information accumulation turns linear on the cavity-lifetime timescale, at a renewal-optimal duration of about two and a half lifetimes; and for a state-of-the-art quantum-coherent coupling experiment the per-hour relative precision lies between one part in a million and ten parts in a million, number and thermal references being the most robust.
We consider a wide family of optical coherent feedback loops acting on an optomechanical system operating in the linearized regime. We assess the efficacy of such loops in improving key operations, such as cooling, steady-state squeezing and entanglement, as well as optical-to-mechanical state transfer. We find that mechanical sideband cooling can be enhanced through passive, interferometric coherent feedback, achieving lower steady-state occupancies and considerably speeding up the cooling process; we also quantify the detrimental effect of nonzero delay times on the cooling performance. Steady-state entanglement generation in the blue sideband can also be assisted by passive interferometric feedback, which allows one to stabilize otherwise unstable systems, though active feedback (including squeezing elements) does not help to this aim. We show that active feedback loops only allow for the generation of optical, but not mechanical, squeezing. Finally, we prove that passive feedback can assist state transfer at transient times for red-sideband-driven systems in the strong-coupling regime.
Abstract We investigate the effect of a degenerate optical parametric amplifier (OPA) placed inside an optomechanical cavity on the steady-state entanglement of two cavity modes, which jointly interact with a mechanical resonator. Two cavity modes are, respectively, driven at the red and blue sideband associated with the mechanical resonator, which generates entanglement between them in the limit of resolved sideband. The OPA gives rise to single-mode squeezing of the cavity fields, which results in significant improvement of the two-mode entanglement. It is found that an optimal nonlinear gain of the OPA exists, depending on the system temperatures, which yields the maximum entanglement. The improvement is particularly remarkable for the system at cryogenic temperatures.
We propose a scheme of an optomechanical system that optimizes entanglement in nanomechanical resonators through quantum state transfer of intracavity squeezing and squeezed reservoir field sources assisted by radiation pressure. The system is driven by red-detuned laser fields, which enable simultaneous cooling of the mechanical resonators and facilitate the quantum state transfer in a weak coupling and good cavity limit. Specifically, the mechanical entanglement is quantified using logarithmic negativity within the bipartite Gaussian states of the two mechanical modes. The results show that several key parameters, including the parametric phase and nonlinear gain of the non-degenerate optical parametric amplifier, the strength of the squeezing reservoir, optomechanical cooperativity, thermal excitation of phonons, and the temperature of mechanical baths, strongly influence the degree of mechanical entanglement. Hence, the findings indicate that careful tuning of the parameters can enable control over the enhancement of entanglement robustness, suggesting that this optomechanical scheme provides a viable pathway for applications in quantum sensing and information processing
Optomechanical generation of entangled optical beams is usually hindered by thermal noise. We present a theoretical study of low frequency entanglement generation between two optical harmonics emitted from a cavity optomechanical system operating in the resolved-sideband regime. The system comprises three nearly equidistant optical modes in a high-finesse cavity, with the central mode coherently driven. This configuration enables radiation-pressure interactions that generate strong quantum correlations between the two sideband modes. Remarkably, these correlations persist even at large numbers of thermal quanta if one properly engineers the optical cooling rate of the mechanical mode. Our findings demonstrate the feasibility of robust entanglement under ambient conditions, opening new avenues for hybrid quantum technologies based on mechanical interfaces and continuous-variable quantum information processing.
We study reservoir-engineered entanglement for a cascaded bosonic system consisting of three modes, where the adjacent pairs couple to each other via both the beam-splitter interaction and the coherent parametric interaction with the interaction strengths being tunable. We focus on an optomechanical realization of the model by combining a nondegenerate parametric amplifier and an auxiliary cavity. A great steady-state cavity-mechanical entanglement can be achieved by optimizing the ratio of the interaction strengths, where the optomechanical cavity enacts the cold reservoir, simultaneously laser cooling the pair of hybrid modes delocalized over the auxiliary cavity and the mechanical oscillator. In comparison with the case of cooling a single delocalized mode, the dual-mode cooling approach allows one to obtain a greater amount of entanglement with higher cooling efficiencies and to explore strong entanglement in much broader parameter regions, where the rotating-wave approximation fails for the single-mode cooling case. Moreover, we show that the steady-state cavity-mechanical entanglement is robust to the mechanical thermal noise of the high temperature. The improved reservoir engineering approach can potentially be generalized to other bosonic systems with asymmetric beam-splitter and parametric interactions.