Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.07258 · Nature Communications

Characterising the failure mechanisms of error-corrected quantum logic gates

Robin Harper, C. Lainé, Evan T. Hockings, Campbell McLauchlan, Georgia M. Nixon, Benjamin J. Brown, Stephen D. Bartlett

Published Apr 10, 2026• 20 citations
arXivHTMLPDF

Abstract

Mid-circuit measurements used in quantum error correction are essential in the architecture of a fault-tolerant quantum computer, as they read out syndrome data and drive logic gates. Here, we use a heavy-hex code prepared on a superconducting qubit array to investigate how different noise sources impact error-corrected logic. First, we identify that idling errors occurring during readout periods are highly detrimental to a quantum memory. We demonstrate significant improvements to the memory by designing and implementing a low-depth syndrome extraction circuit. Second, we perform a stability experiment to investigate the type of failures that can occur during logic gates due to readout assignment errors. We find that the error rate of the stability experiment improves with additional stabilizer readout cycles, revealing a trade-off as additional stability comes at the expense of time over which the memory can decay. We corroborate our results using holistic device benchmarking and by comparison to numerical simulations. Finally, by varying different parameters in our simulations we identify the key noise sources that impact the fidelity of fault-tolerant logic gates, with measurement noise playing a dominant role in logical gate performance. With rapid progress in quantum error correction, clear performance benchmarks are needed to assess readiness for fault tolerant operation. Here the authors report benchmarking and noise characterization in a superconducting quantum processor, identifying key factors that impact error-corrected logic.

DOI
10.1038/s41467-026-71773-6

Related papers

Error-Corrected Memory and Logic on a Heavy-Hex Superconducting-Qubit Processor

Campbell K. McLauchlan, Georgia M. Nixon, Julien M. Drouet +7 more

Large quantum computations require high-fidelity error-corrected memory and fault-tolerant logical operations. To achieve these with superconducting circuits, quantum processors will need many components operating with low error rates. In practice, fabrication of monolithic superconducting devices produces unavoidable heterogeneity in component performance, which the quantum computer must accommodate. We implement strategies to operate a large dynamic compass code on an array of 156 superconducting qubits arranged on a heavy-hexagonal lattice, making use of the entire monolithic quantum processor and redesigning our measurement schedule to exclude underperforming components. We demonstrate improvements of up to $35\%$ in logical error probabilities for a memory experiment by using a noise-informed decoder combined with strategies to exclude the worst-performing qubits and couplers, along with post-selecting on shots with a low probability of leakage errors. In addition to these memory results, we also observe performance gains of up to $56\%$ when these strategies are applied to measurement-based logic, demonstrated by stability experiments. We furthermore demonstrate high-fidelity fault-tolerant logic through lattice surgery. Through pre-selection filtering techniques, we can obtain Bell fidelities above $77\%$, and further logical gap post-selection using exclusive decoding increases these fidelities to above $97\%$. Our experiments demonstrate that high performance can be maintained in key elements of fault-tolerant quantum memory and logic when working on monolithic superconducting quantum processors with underperforming components, by using a suite of noise-informed quantum error correction strategies.

quant-pharXiv:2610.11658•Oct 9, 2026•1 citation

Quantum computer error structure probed by quantum error correction syndrome measurements

Spiro Gicev, Lloyd C. L. Hollenberg, Muhammad Usman

With quantum devices rapidly approaching qualities and scales needed for fault tolerance, the validity of simplified error models underpinning the study of quantum error correction needs to be experimentally evaluated. In this work, we have assessed the performance of IBM superconducting quantum computer devices implementing heavy-hexagon code syndrome measurements with circuit sizes up to 23 qubits, against the error assumptions underpinning code threshold calculations. Circuit operator change rate statistics in the presence of depolarizing and biased noise were modeled using analytic functions of error model parameters. Data from 16 repeated syndrome measurement cycles were found to be inconsistent with a uniform depolarizing noise model, with slightly improved fits found with biased and inhomogeneous noise models. Spatial-temporal correlations investigated via Z stabilizer measurements revealed significant temporal correlation in detection events. These results highlight the nontrivial structure that may be present in the noise of quantum error correction circuits, revealed by operator measurement statistics, and support the development of noise-tailored codes and decoders to adapt. Published by the American Physical Society 2024

arXiv:2310.12448•Physical Review Research•Dec 9, 2024•15 citations

Minimizing readout-induced noise for early fault-tolerant quantum computers

Yunzhe Zheng, Keita Kanno

Quantum error correcting code can diagnose potential errors and correct them based on measured outcomes by leveraging syndrome measurement. However, mid-circuit measurement has been technically challenging for early fault-tolerant quantum computers and the readout-induced noise acts as a main contributor to the logical infidelity. We present a different method for syndrome extraction, namely , that requires only a single-shot measurement on a single ancilla, while the canonical syndrome measurement requires multiple measurements to extract the eigenvalue for each stabilizer generator. As such, we can detect the error in the logical state with minimized readout-induced noise. By adopting our method as a precheck routine for quantum error correcting cycles, we can significantly reduce the readout overhead, the idling time, and the logical error rate during syndrome measurement. We numerically analyze the performance of our protocol using Iceberg code and Steane code under realistic noise parameters based on superconducting hardware and demonstrate the advantage of our protocol in the near-term scenario. As mid-circuit measurements are still error-prone for near-term quantum hardware, our method could boost the applications of early fault-tolerant quantum computing. Published by the American Physical Society 2024

arXiv:2304.11532•Physical Review Research•May 6, 2024•4 citations

Demonstration of Logical Error Suppression in a Surface Code Memory on a Cloud-Accessible IBM Superconducting Processor

Shuwen Kan, Aaron Hoyt, Sean Garner +8 more

Quantum error correction can suppress logical errors exponentially with code distance when physical noise is below threshold. Realizing this on hardware requires tight coordination among quantum gates, mid-circuit measurements, and qubit coherence. Device variation, noise asymmetry, and correlations across space and time complicate the translation of these capabilities into logical error suppression. Here, we study rotated surface-code memory on an IBM Nighthawk r2 processor. Performance varies across tested processor placements, which we attribute to differences in qubit quality. We optimize the code by combining short readout, fused measurement and reset, and an XX echo on data qubits during ancilla readout. Compared with standard readout without reset or echo, the optimized syndrome extraction circuit reduces the median per-round logical error rate by factors of 3.8 in the X basis and 1.4 in the Z basis. In memory experiments of up to 150 rounds, the distance advantage weakens, alongside long-lived correlations that may reflect a persistent error component. Under our optimization recipe, increasing the protected distance from 3 to 6 while holding the other distance fixed reduces the per-round logical error rate from 0.53% to 0.24% in Z memory and from 0.52% to 0.22% in X memory. The corresponding error-suppression factors under maximum-likelihood decoding are 1.68 and 1.85. These results connect circuit compilation and optimization to surface-code memory performance and limitations, and motivate QPU and QEC circuit codesign for fault-tolerant quantum computing primitives on current cloud hardware.

quant-pharXiv:2610.23840•Oct 19, 2026•2 citations

Noise characterisation of fault-tolerant quantum computers

Evan T. Hockings

Noise is the fundamental challenge to quantum computation. Large-scale quantum computers will overcome this challenge with fault-tolerant architectures that leverage quantum error correction. This thesis introduces and investigates a scalable noise characterisation protocol suited to this key context. First, we introduce this protocol by building upon averaged circuit eigenvalue sampling (ACES), a framework for noise characterisation experiments that simultaneously estimates the Pauli error probabilities of all gates in a Clifford circuit and captures averaged spatial correlations between gates implemented simultaneously in the layers of the circuit. We demonstrate the scalability and performance of our protocol through circuit-level numerical simulations of the entire noise characterisation procedure. Then we demonstrate in circuit-level numerical simulation that this protocol is practically capable of calibrating a fast correlated matching decoder, enabling noise-aware decoding. We find that noise-aware decoding increases the error suppression factor of the code, leading to reductions in the logical error rate that increase exponentially with the code distance. Finally, we present several results obtained from experimentally implementing this protocol. We use the noise characterisation results to design an improved syndrome extraction circuit for a heavy hexagon memory that is adapted to the noise characteristics of the quantum device. The model error of our noise characterisation results suggests that the circuit-level Pauli noise model estimated by ACES can describe the essential features of quantum noise. We also operate a heavy hexagon memory and use noise estimates to predict performance and inform decoding. These results demonstrate that Pauli noise estimates can calibrate decoders to enable noise-aware decoding and inform the co-design of quantum error correcting codes, decoders, fault-tolerant circuits, and quantum devices.

•Jan 1, 2025•0 citations

Measurement-Free Fault-Tolerant Quantum Error Correction in Near-Term Devices

Sascha Heußen, David F. Locher, Markus Müller

Logical qubits can be protected from decoherence by performing quantum error-correction (QEC) cycles repeatedly. Algorithms for fault-tolerant QEC must be compiled to the specific hardware platform under consideration in order to practically realize a quantum memory that operates for in principle arbitrary long times. All circuit components must be assumed as noisy unless specific assumptions about the form of the noise are made. Modern QEC schemes are challenging to implement experimentally in physical architectures where in-sequence measurements and feed forward of classical information cannot be reliably executed fast enough or even at all. Here we provide a novel scheme to perform QEC cycles without the need of measuring qubits that is fully fault-tolerant with respect to all components used in the circuit. Our scheme can be used for any low-distance CSS code since its only requirement towards the underlying code is a transversal gate. Similarly to Steane-type EC, we coherently copy errors to a logical auxiliary qubit but then apply a coherent feedback operation from the auxiliary system to the logical data qubit. The logical auxiliary qubit is prepared fault tolerantly without measurements, too. We benchmark logical failure rates of the scheme in comparison to a flag-qubit-based EC cycle. We map out a parameter region where our scheme is feasible and estimate physical error rates necessary to achieve the break-even point of beneficial QEC with our scheme. We outline how our scheme could be implemented in ion traps and with neutral atoms in a tweezer array. For recently demonstrated capabilities of atom shuttling and native multiatom Rydberg gates, we achieve moderate circuit depths and beneficial performance of our scheme while not breaking fault tolerance. These results thereby enable practical fault-tolerant QEC in hardware architectures that do not support midcircuit measurements. Published by the American Physical Society 2024

arXiv:2307.13296•PRX Quantum•Feb 27, 2024•53 citations
Mid-circuit measurements used in quantum error correction are essential in the architecture of a fault-tolerant quantum computer, as they read out syndrome data and drive logic gates. Here, we use a heavy-hex code prepared on a superconducting qubit array to investigate how different noise sources impact error-corrected logic. First, we identify that idling errors occurring during readout periods are highly detrimental to a quantum memory. We demonstrate significant improvements to the memory by designing and implementing a low-depth syndrome extraction circuit. Second, we perform a stability experiment to investigate the type of failures that can occur during logic gates due to readout assignment errors. We find that the error rate of the stability experiment improves with additional stabilizer readout cycles, revealing a trade-off as additional stability comes at the expense of time over which the memory can decay. We corroborate our results using holistic device benchmarking and by comparison to numerical simulations. Finally, by varying different parameters in our simulations we identify the key noise sources that impact the fidelity of fault-tolerant logic gates, with measurement noise playing a dominant role in logical gate performance. With rapid progress in quantum error correction, clear performance benchmarks are needed to assess readiness for fault tolerant operation. Here the authors report benchmarking and noise characterization in a superconducting quantum processor, identifying key factors that impact error-corrected logic.
Large quantum computations require high-fidelity error-corrected memory and fault-tolerant logical operations. To achieve these with superconducting circuits, quantum processors will need many components operating with low error rates. In practice, fabrication of monolithic superconducting devices produces unavoidable heterogeneity in component performance, which the quantum computer must accommodate. We implement strategies to operate a large dynamic compass code on an array of 156 superconducting qubits arranged on a heavy-hexagonal lattice, making use of the entire monolithic quantum processor and redesigning our measurement schedule to exclude underperforming components. We demonstrate improvements of up to 35%35\%35% in logical error probabilities for a memory experiment by using a noise-informed decoder combined with strategies to exclude the worst-performing qubits and couplers, along with post-selecting on shots with a low probability of leakage errors. In addition to these memory results, we also observe performance gains of up to 56%56\%56% when these strategies are applied to measurement-based logic, demonstrated by stability experiments. We furthermore demonstrate high-fidelity fault-tolerant logic through lattice surgery. Through pre-selection filtering techniques, we can obtain Bell fidelities above 77%77\%77%, and further logical gap post-selection using exclusive decoding increases these fidelities to above 97%97\%97%. Our experiments demonstrate that high performance can be maintained in key elements of fault-tolerant quantum memory and logic when working on monolithic superconducting quantum processors with underperforming components, by using a suite of noise-informed quantum error correction strategies.
With quantum devices rapidly approaching qualities and scales needed for fault tolerance, the validity of simplified error models underpinning the study of quantum error correction needs to be experimentally evaluated. In this work, we have assessed the performance of IBM superconducting quantum computer devices implementing heavy-hexagon code syndrome measurements with circuit sizes up to 23 qubits, against the error assumptions underpinning code threshold calculations. Circuit operator change rate statistics in the presence of depolarizing and biased noise were modeled using analytic functions of error model parameters. Data from 16 repeated syndrome measurement cycles were found to be inconsistent with a uniform depolarizing noise model, with slightly improved fits found with biased and inhomogeneous noise models. Spatial-temporal correlations investigated via Z stabilizer measurements revealed significant temporal correlation in detection events. These results highlight the nontrivial structure that may be present in the noise of quantum error correction circuits, revealed by operator measurement statistics, and support the development of noise-tailored codes and decoders to adapt. Published by the American Physical Society 2024
Quantum error correcting code can diagnose potential errors and correct them based on measured outcomes by leveraging syndrome measurement. However, mid-circuit measurement has been technically challenging for early fault-tolerant quantum computers and the readout-induced noise acts as a main contributor to the logical infidelity. We present a different method for syndrome extraction, namely , that requires only a single-shot measurement on a single ancilla, while the canonical syndrome measurement requires multiple measurements to extract the eigenvalue for each stabilizer generator. As such, we can detect the error in the logical state with minimized readout-induced noise. By adopting our method as a precheck routine for quantum error correcting cycles, we can significantly reduce the readout overhead, the idling time, and the logical error rate during syndrome measurement. We numerically analyze the performance of our protocol using Iceberg code and Steane code under realistic noise parameters based on superconducting hardware and demonstrate the advantage of our protocol in the near-term scenario. As mid-circuit measurements are still error-prone for near-term quantum hardware, our method could boost the applications of early fault-tolerant quantum computing. Published by the American Physical Society 2024
Quantum error correction can suppress logical errors exponentially with code distance when physical noise is below threshold. Realizing this on hardware requires tight coordination among quantum gates, mid-circuit measurements, and qubit coherence. Device variation, noise asymmetry, and correlations across space and time complicate the translation of these capabilities into logical error suppression. Here, we study rotated surface-code memory on an IBM Nighthawk r2 processor. Performance varies across tested processor placements, which we attribute to differences in qubit quality. We optimize the code by combining short readout, fused measurement and reset, and an XX echo on data qubits during ancilla readout. Compared with standard readout without reset or echo, the optimized syndrome extraction circuit reduces the median per-round logical error rate by factors of 3.8 in the X basis and 1.4 in the Z basis. In memory experiments of up to 150 rounds, the distance advantage weakens, alongside long-lived correlations that may reflect a persistent error component. Under our optimization recipe, increasing the protected distance from 3 to 6 while holding the other distance fixed reduces the per-round logical error rate from 0.53% to 0.24% in Z memory and from 0.52% to 0.22% in X memory. The corresponding error-suppression factors under maximum-likelihood decoding are 1.68 and 1.85. These results connect circuit compilation and optimization to surface-code memory performance and limitations, and motivate QPU and QEC circuit codesign for fault-tolerant quantum computing primitives on current cloud hardware.
Noise is the fundamental challenge to quantum computation. Large-scale quantum computers will overcome this challenge with fault-tolerant architectures that leverage quantum error correction. This thesis introduces and investigates a scalable noise characterisation protocol suited to this key context. First, we introduce this protocol by building upon averaged circuit eigenvalue sampling (ACES), a framework for noise characterisation experiments that simultaneously estimates the Pauli error probabilities of all gates in a Clifford circuit and captures averaged spatial correlations between gates implemented simultaneously in the layers of the circuit. We demonstrate the scalability and performance of our protocol through circuit-level numerical simulations of the entire noise characterisation procedure. Then we demonstrate in circuit-level numerical simulation that this protocol is practically capable of calibrating a fast correlated matching decoder, enabling noise-aware decoding. We find that noise-aware decoding increases the error suppression factor of the code, leading to reductions in the logical error rate that increase exponentially with the code distance. Finally, we present several results obtained from experimentally implementing this protocol. We use the noise characterisation results to design an improved syndrome extraction circuit for a heavy hexagon memory that is adapted to the noise characteristics of the quantum device. The model error of our noise characterisation results suggests that the circuit-level Pauli noise model estimated by ACES can describe the essential features of quantum noise. We also operate a heavy hexagon memory and use noise estimates to predict performance and inform decoding. These results demonstrate that Pauli noise estimates can calibrate decoders to enable noise-aware decoding and inform the co-design of quantum error correcting codes, decoders, fault-tolerant circuits, and quantum devices.
Logical qubits can be protected from decoherence by performing quantum error-correction (QEC) cycles repeatedly. Algorithms for fault-tolerant QEC must be compiled to the specific hardware platform under consideration in order to practically realize a quantum memory that operates for in principle arbitrary long times. All circuit components must be assumed as noisy unless specific assumptions about the form of the noise are made. Modern QEC schemes are challenging to implement experimentally in physical architectures where in-sequence measurements and feed forward of classical information cannot be reliably executed fast enough or even at all. Here we provide a novel scheme to perform QEC cycles without the need of measuring qubits that is fully fault-tolerant with respect to all components used in the circuit. Our scheme can be used for any low-distance CSS code since its only requirement towards the underlying code is a transversal gate. Similarly to Steane-type EC, we coherently copy errors to a logical auxiliary qubit but then apply a coherent feedback operation from the auxiliary system to the logical data qubit. The logical auxiliary qubit is prepared fault tolerantly without measurements, too. We benchmark logical failure rates of the scheme in comparison to a flag-qubit-based EC cycle. We map out a parameter region where our scheme is feasible and estimate physical error rates necessary to achieve the break-even point of beneficial QEC with our scheme. We outline how our scheme could be implemented in ion traps and with neutral atoms in a tweezer array. For recently demonstrated capabilities of atom shuttling and native multiatom Rydberg gates, we achieve moderate circuit depths and beneficial performance of our scheme while not breaking fault tolerance. These results thereby enable practical fault-tolerant QEC in hardware architectures that do not support midcircuit measurements. Published by the American Physical Society 2024