Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2504.06528 · Physical Review Applied

Low-latency control system for feedback experiments with optical-tweezer arrays

Amir H. Dadpour, Timur Khayrullin, Fouad Afiouni, Remy El Sabeh, Amer E. Mouawad, Izzat El Hajj, Alexandre Cooper

Published Jul 15, 2025• 4 citations
arXivHTMLPDF

Abstract

We present and characterize a modular, open-source system to perform feedback control experiments on configurations of atoms and molecules in arrays of optical tweezers. The system features a modular, cost-effective computer architecture with a motherboard and peripheral cards. It supports efficient data transfer to and from graphics processing units (GPUs) using Remote Direct Memory Access (RDMA), leveraging GPU efficiency in matrix multiplication and parallelism, while enabling direct data transfer between devices without involving the CPU. We first describe the architecture and workflow of the system, detailing its hardware components and software modules. We then evaluate the computational runtime for preparing defect-free chains and grids of atoms using efficient implementations of atom reconfiguration algorithms. Finally, we discuss timing bottlenecks and strategies to reduce latency. Beyond solving reconfiguration problems, the system can readily be used to implement adaptive and feedforward protocols, as well as digital quantum algorithms relying on particle displacement. Our results lay the groundwork for developing low-latency feedback control systems, benchmarking their performance, and advancing scalable quantum hardware.

DOI
10.1103/svtr-1rmd

Related papers

Low-latency FPGA-based electronic control system for fast preparation of defect-free atom arrays

Ya-Dong Hu, Dong-Qi Ma, Tian-Yang Zhang +13 more

The scalability of neutral atom quantum computing demands integrated electronic control systems with low latency, modular architecture, and real-time feedback capability. Here, we present an FPGA-based electronic control system that eliminates the PC from the feedback loop, integrating photon counting, real-time decision-making, and waveform generation within a unified PXIe architecture. The system achieves a total feedback latency of $282\,\mathrm{μs}$ and is validated in practical experiments by assembling defect-free atom arrays from 24 stochastically loaded optical tweezers. A single-round rearrangement achieves a filling fraction of $\sim96\%$, while feedback-controlled iterative rearrangement over five rounds boosts the success probability for generating a 10-atom defect-free array from $65.7\%$ to $95.4\%$. This system establishes the electronic infrastructure necessary for mid-circuit measurement and real-time quantum error correction on neutral-atom platforms.

quant-pharXiv:2607.08687•Jul 10, 2026•3 citations

A low-cost modular FPGA-based control system for neutral atom tweezer arrays

Zeyu Ye, Varun Jorapur, F. Granato +6 more

We present the Quantum Atom Control Kit (QuACK), a low-cost FPGA-based control system that provides memory-efficient precise signal timing and low-delay measurement-based decision making for operating neutral atom optical tweezer array experiments. The system consists of an FPGA module connected to a host computer via USB 3.0 and multiple cable-connected modular daughterboards enabling a myriad of configurable I/O formats. In this work, digital input and output as well as analog outputs are demonstrated. Multiple experimental sequence segments can be encoded with 5 ns timing resolution. On-chip condition kernels enable fast branching between segments based on digital inputs, eliminating host intervention for time-critical decisions, while high-speed USB communication allows rapid sequence updates and host-level orchestration. We demonstrate initial system loading and rearranging neutral ytterbium-171 atoms in optical tweezers. The combination of high-resolution timing, on-chip logic, and distributed orchestration architecture makes this system well suited for atomic, molecular, and optical (AMO) experiments pursuing applications in quantum information science.

arXiv:2609.25456•Sep 21, 2026•0 citations

Efficient Assembly of a Defect-Free Quantum Register of 1024 Neutral-Atom Qubits

Lukas Sturm, Marcel Mittenbuehler, Tim Gollerthan +2 more

Low-entropy arrays of atomic quantum systems in optical tweezers offer unique prospects for fundamental research on few- and many-body systems as well as for extended applications in quantum technology. The significance of this approach relies on the achievable system size, its uniformity, and the rate of qubit allocation. We propel the neutral-atom quantum-technology platform by the rapid assembly of a regular two-dimensional quantum register of up to 1024 atomic qubits, enabled by a novel implementation of intensity-homogenized tweezer arrays and parallelized atom transport. Our highly efficient microoptical architecture modularizes intensity equalization and tweezer patterning in separate functional units, eliminating restrictions that arise for high-power, high-resolution, and large-scale light-field control within a single device. Arrays of precise grid structure, trap depth, and vibrational frequency with more than 3500 sites are demonstrated. Individual sites are interconnected by up to 50 parallelized transport tweezers with intensity and position control in real-time for swift qubit relocation. Multi-tweezer transport enables the operation of target patterns of up to 32 x 32 sites with sustained near-unity filling fraction. These results boost neutral-atom quantum information science above the kiloqubit level.

quant-pharXiv:2608.12021•Aug 13, 2026•0 citations

A Low-Latency Control Fabric for Distributed Quantum Error Correction using RDMA: A Timed Event Structure Model

Vasileios Klimis

Scalable, fault-tolerant quantum computing will likely rely on distributed architectures of multiple interconnected Quantum Processing Units (QPUs). The performance of such systems is critically limited by the latency of the classical communication required for feedback loops, especially within Quantum Error Correction (QEC) protocols. Traditional network stacks like TCP/IP introduce significant kernel-level overhead, creating latency that can easily exceed qubit coherence times and render QEC ineffective. In this paper, we propose a novel classical control plane architecture that leverages Remote Direct Memory Access (RDMA) to bypass the operating system kernel and enable ultra-low-latency communication between QPU control processors. To formally analyse this system, we introduce a Timed Event Structure model to precisely capture the causality and latency of the entire QEC feedback loop. Our analysis, based on this model, demonstrates that an RDMA-based fabric drastically reduces end-to-end latency compared to a TCP/IP-based approach, establishing it as a critical enabling technology for building robust, distributed, and fault-tolerant quantum computers.

IEEE Conference on Pervasive and Intelligent Computing (PICom)•Oct 21, 2025•0 citations

Dynamically Reconfigurable Quantum Memory using Optical Tweezers

Jincheng Zhang

This work presents a novel approach to dynamically reconfigurable quantum memory utilizing optical tweezers and a photonic crystal cavity. The core concept involves precisely manipulating individual quantum memory qubits within the cavity using optical tweezers, coupled with feedback control based on quantum state detection. This allows for the dynamic rearrangement of the memory layout and optimization of qubit connectivity. The method offers a pathway to enhance the scalability and connectivity of quantum memory architectures, addressing a critical challenge in the development of quantum computing. We demonstrate the feasibility of this approach through theoretical modeling and analysis, focusing on the control mechanisms and potential performance improvements. The proposed system leverages the inherent advantages of photonic crystal cavities for qubit confinement and the precise manipulation capabilities of optical tweezers. The key parameters governing the system's performance, including tweezers force, cavity resonance frequency, and quantum state detection sensitivity, are analyzed to determine optimal operating conditions. This research lays the groundwork for a physically reconfigurable quantum memory, representing a significant step towards building practical and scalable quantum information processing systems.

•Sep 4, 2026•0 citations

FPGA-Based Real-Time Laser Beam Profiling and Stabilization System for Quantum Simulation Applications

Stefano Marti, Enis Mustafa, Giacomo Bisson +4 more

Lasers are imperative in quantum simulation experiments to trap and cool atoms. With the growing complexity of experimental setups, precise control and stability of the position and exotic shape of lasers have become essential for high-fidelity operations. However, disturbances such as temperature fluctuations, mechanical vibrations, deformation of materials, and acoustic noise pose challenges to fulfill these requirements. In this paper, we propose and evaluate the first system for stabilizing the laser's beam position using two high-resolution cameras with high frame-rates, and image processing in a field-programmable gate array (FPGA) with low latency and subsequent in-loop feedback to the laser control. The proposed image processing hardware extracts the Gaussian beam distribution from two 5 MP cameras at 47 fps and 435 ns latency. These are fed to four proportional-integral-derivative (PID) controllers implemented on the FPGA. The PID modules provide feedback through parallel digital-to-analog converter (DAC) channels for steering mirrors to stabilize the beam within 5 µm accuracy. Using two cameras at distinct sample distances on the optical axis allows for controlling the incidence angle of the laser beam onto the image planes. The current system is a building block for future extensions allowing real-time phase-feedback on optical lattices, stabilization of independent optical tweezers in an array, and focus position stabilization of transverse electromagnetic (e.g. TEM01) modes enabling large-scale quantum simulations.

Euromicro Conference on Digital System Design (DSD)•Sep 6, 2023•2 citations
We present and characterize a modular, open-source system to perform feedback control experiments on configurations of atoms and molecules in arrays of optical tweezers. The system features a modular, cost-effective computer architecture with a motherboard and peripheral cards. It supports efficient data transfer to and from graphics processing units (GPUs) using Remote Direct Memory Access (RDMA), leveraging GPU efficiency in matrix multiplication and parallelism, while enabling direct data transfer between devices without involving the CPU. We first describe the architecture and workflow of the system, detailing its hardware components and software modules. We then evaluate the computational runtime for preparing defect-free chains and grids of atoms using efficient implementations of atom reconfiguration algorithms. Finally, we discuss timing bottlenecks and strategies to reduce latency. Beyond solving reconfiguration problems, the system can readily be used to implement adaptive and feedforward protocols, as well as digital quantum algorithms relying on particle displacement. Our results lay the groundwork for developing low-latency feedback control systems, benchmarking their performance, and advancing scalable quantum hardware.
The scalability of neutral atom quantum computing demands integrated electronic control systems with low latency, modular architecture, and real-time feedback capability. Here, we present an FPGA-based electronic control system that eliminates the PC from the feedback loop, integrating photon counting, real-time decision-making, and waveform generation within a unified PXIe architecture. The system achieves a total feedback latency of 282 μs282\,\mathrm{μs}282μs and is validated in practical experiments by assembling defect-free atom arrays from 24 stochastically loaded optical tweezers. A single-round rearrangement achieves a filling fraction of ∼96%\sim96\%∼96%, while feedback-controlled iterative rearrangement over five rounds boosts the success probability for generating a 10-atom defect-free array from 65.7%65.7\%65.7% to 95.4%95.4\%95.4%. This system establishes the electronic infrastructure necessary for mid-circuit measurement and real-time quantum error correction on neutral-atom platforms.
We present the Quantum Atom Control Kit (QuACK), a low-cost FPGA-based control system that provides memory-efficient precise signal timing and low-delay measurement-based decision making for operating neutral atom optical tweezer array experiments. The system consists of an FPGA module connected to a host computer via USB 3.0 and multiple cable-connected modular daughterboards enabling a myriad of configurable I/O formats. In this work, digital input and output as well as analog outputs are demonstrated. Multiple experimental sequence segments can be encoded with 5 ns timing resolution. On-chip condition kernels enable fast branching between segments based on digital inputs, eliminating host intervention for time-critical decisions, while high-speed USB communication allows rapid sequence updates and host-level orchestration. We demonstrate initial system loading and rearranging neutral ytterbium-171 atoms in optical tweezers. The combination of high-resolution timing, on-chip logic, and distributed orchestration architecture makes this system well suited for atomic, molecular, and optical (AMO) experiments pursuing applications in quantum information science.
Low-entropy arrays of atomic quantum systems in optical tweezers offer unique prospects for fundamental research on few- and many-body systems as well as for extended applications in quantum technology. The significance of this approach relies on the achievable system size, its uniformity, and the rate of qubit allocation. We propel the neutral-atom quantum-technology platform by the rapid assembly of a regular two-dimensional quantum register of up to 1024 atomic qubits, enabled by a novel implementation of intensity-homogenized tweezer arrays and parallelized atom transport. Our highly efficient microoptical architecture modularizes intensity equalization and tweezer patterning in separate functional units, eliminating restrictions that arise for high-power, high-resolution, and large-scale light-field control within a single device. Arrays of precise grid structure, trap depth, and vibrational frequency with more than 3500 sites are demonstrated. Individual sites are interconnected by up to 50 parallelized transport tweezers with intensity and position control in real-time for swift qubit relocation. Multi-tweezer transport enables the operation of target patterns of up to 32 x 32 sites with sustained near-unity filling fraction. These results boost neutral-atom quantum information science above the kiloqubit level.
Scalable, fault-tolerant quantum computing will likely rely on distributed architectures of multiple interconnected Quantum Processing Units (QPUs). The performance of such systems is critically limited by the latency of the classical communication required for feedback loops, especially within Quantum Error Correction (QEC) protocols. Traditional network stacks like TCP/IP introduce significant kernel-level overhead, creating latency that can easily exceed qubit coherence times and render QEC ineffective. In this paper, we propose a novel classical control plane architecture that leverages Remote Direct Memory Access (RDMA) to bypass the operating system kernel and enable ultra-low-latency communication between QPU control processors. To formally analyse this system, we introduce a Timed Event Structure model to precisely capture the causality and latency of the entire QEC feedback loop. Our analysis, based on this model, demonstrates that an RDMA-based fabric drastically reduces end-to-end latency compared to a TCP/IP-based approach, establishing it as a critical enabling technology for building robust, distributed, and fault-tolerant quantum computers.
This work presents a novel approach to dynamically reconfigurable quantum memory utilizing optical tweezers and a photonic crystal cavity. The core concept involves precisely manipulating individual quantum memory qubits within the cavity using optical tweezers, coupled with feedback control based on quantum state detection. This allows for the dynamic rearrangement of the memory layout and optimization of qubit connectivity. The method offers a pathway to enhance the scalability and connectivity of quantum memory architectures, addressing a critical challenge in the development of quantum computing. We demonstrate the feasibility of this approach through theoretical modeling and analysis, focusing on the control mechanisms and potential performance improvements. The proposed system leverages the inherent advantages of photonic crystal cavities for qubit confinement and the precise manipulation capabilities of optical tweezers. The key parameters governing the system's performance, including tweezers force, cavity resonance frequency, and quantum state detection sensitivity, are analyzed to determine optimal operating conditions. This research lays the groundwork for a physically reconfigurable quantum memory, representing a significant step towards building practical and scalable quantum information processing systems.
Lasers are imperative in quantum simulation experiments to trap and cool atoms. With the growing complexity of experimental setups, precise control and stability of the position and exotic shape of lasers have become essential for high-fidelity operations. However, disturbances such as temperature fluctuations, mechanical vibrations, deformation of materials, and acoustic noise pose challenges to fulfill these requirements. In this paper, we propose and evaluate the first system for stabilizing the laser's beam position using two high-resolution cameras with high frame-rates, and image processing in a field-programmable gate array (FPGA) with low latency and subsequent in-loop feedback to the laser control. The proposed image processing hardware extracts the Gaussian beam distribution from two 5 MP cameras at 47 fps and 435 ns latency. These are fed to four proportional-integral-derivative (PID) controllers implemented on the FPGA. The PID modules provide feedback through parallel digital-to-analog converter (DAC) channels for steering mirrors to stabilize the beam within 5 µm accuracy. Using two cameras at distinct sample distances on the optical axis allows for controlling the incidence angle of the laser beam onto the image planes. The current system is a building block for future extensions allowing real-time phase-feedback on optical lattices, stabilization of independent optical tweezers in an array, and focus position stabilization of transverse electromagnetic (e.g. TEM01) modes enabling large-scale quantum simulations.