Near-term quantum algorithms are a promising route to solving partial differential equations, but gauging their true potential requires separating algorithmic performance from sampling and hardware noise. We benchmark a ground-state variational quantum eigensolver (VQE), cast as a variational quantum linear solver, against the Trotterization, variational quantum imaginary time evolution, and adaptive variational quantum dynamics simulation methods applied to the one-dimensional advection-diffusion equation in the recent quantum-dynamics study by Alipanah et al. [Phys. Rev. Res. 7, 043318 (2025)2643-156410.1103/ndc3-bdwt] at matched grid and problem size. On a noiseless state-vector simulator the N=4 VQE drives the final-time infidelity to a numerical floor (∼10^{-14}) once the depth reaches L≈5, an algorithmic ceiling set by exact expectation values. Evaluating the same solver with a finite number S of measurement shots, still without hardware noise, makes the infidelity sampling limited, following 1-f≈c/S (a best-case readout-sampling estimate, with the solution's signs assumed known), providing a regime-matched comparison with the shot-based emulator of Alipanah et al. and explaining the gap to their noisy hardware runs (>10^{-1}). The benchmark thus decomposes the near-term error budget into algorithmic, sampling, and hardware contributions, with a matched-depth resource comparison. The formulation applies without modification across N=4,5,6 qubits and to a two-dimensional (eight-qubit, 16×16) problem evolved to t=1, where the state-vector VQE holds a ∼10^{-7} algorithmic-ceiling infidelity against the sampling-limited ∼10^{-5} of the corresponding shot-based simulation, a difference of measurement regime rather than algorithmic superiority.
The advection-diffusion equation is simulated via several quantum algorithms. Three formulations are considered: (1) Trotterization, (2) variational quantum time evolution (VarQTE), and (3) adaptive variational quantum dynamics simulation (AVQDS). These schemes were originally developed for the Hamiltonian simulation of many-body quantum systems. The finite-difference discretized operator of the transport equation is formulated as a Hamiltonian and solved without the need for ancillary qubits. Computations are conducted on a quantum simulator (IBM Qiskit Aer) and a superconducting quantum hardware (IBM Fez). The former emulates the latter without the noise. The actual hardware implementation experiences significant noise. The results of the quantum simulator are compared with data from direct numerical simulation (DNS) with infidelities of the order 10 − 5 . In the quantum simulator, Trotterization is observed to have the lowest infidelity and is suitable for fault-tolerant computation. The AVQDS algorithm requires the lowest gate count and circuit depth. The VarQTE algorithm is the next best in terms of gate counts, but the number of its optimization variables is directly proportional to the number of qubits. Due to current hardware limitations, Trotterization cannot be implemented, as it has an overwhelmingly large number of operations. Meanwhile, AVQDS and VarQTE can be executed at the hardware level. These algorithms present a new paradigm for computational transport phenomena on quantum computers.
Quantum PDE solvers are difficult to evaluate in practice because published studies use different discretizations, output models, reconstruction rules, and hardware assumptions. We present a reproducible, application-driven benchmark for the 1-D Dirichlet heat equation that compares eleven kernels under the same problem instances and readout contract. The benchmark covers coherent linear solvers (HHL, QSVT, and QLS-Fourier), VQLS, imaginary-time methods (QITE, var-QITE, and AVQDS), real-time Hamiltonian simulation and unitary dilations (Hamiltonian simulation, Schade-Hamiltonian, and Schr"odingerisation), and the spectral quantum simulation method (QSM). We use three initial conditions, four grid sizes from
n=4 to
7 qubits (
N=16 to
128), a CFL-like ratio
r≈0.4, and final time
T=1. Statevector, ideal-shot (
105 shots per step), and noisy Aer backends separate algorithmic, sampling, and device-noise errors. On statevector, QSM and Schade-Hamiltonian reproduce the semi-discrete reference to floating-point precision, Schr"odingerisation reaches approximately
10−4 error, and QITE is the strongest non-transform method for smooth data. Under the fixed-shot setting, HHL degrades to approximately
0.79 relative
ℓ2 error, while several low-depth or postselected methods become readout-limited. A norm-mismatch ablation attributes 23--29% of the
n=7 smooth-initial-condition error of Hamiltonian simulation, AVQDS, and QLS-Fourier to reconstruction normalization. Compact observables, including total thermal energy and individual Fourier-mode weights, require 1--3 orders of magnitude fewer shots than full-field reconstruction. The resulting public benchmark provides a practical guide for selecting quantum PDE solvers.
Two quantum algorithms are presented for the numerical solution of a linear one-dimensional advection–diffusion equation with periodic boundary conditions. Their accuracy and performance with increasing qubit number are compared point-by-point with each other. Specifically, we solve the linear partial differential equation with a Quantum Linear Systems Algorithm (QLSA) based on the Harrow–Hassidim–Lloyd method and a Variational Quantum Algorithm (VQA), for resolutions that can be encoded using up to 6 qubits, which corresponds to N=64 grid points on the unit interval. Both algorithms are hybrid in nature, i.e., they involve a combination of classical and quantum computing building blocks. The QLSA and VQA are solved as ideal statevector simulations using the in-house solver QFlowS and open-access Qiskit software, respectively. We discuss several aspects of both algorithms which are crucial for a successful performance in both cases. These are the accurate eigenvalue estimation with the quantum phase estimation for the QLSA and the choice of the algorithm of the minimization of the cost function for the VQA. The latter algorithm is also implemented in the noisy Qiskit framework including measurement noise. We reflect on the current limitations and suggest some possible routes of future research for the numerical simulation of classical fluid flows on a quantum computer.
Variational quantum dynamics simulations (VQDS) provide a promising route to simulate real- and imaginary-time quantum dynamics on noisy intermediate-scale quantum devices using fixed-depth circuits. However, their practical performance is strongly limited by sampling noise arising from a finite number of circuit measurements. In this work, we systematically investigate the impact of sampling noise on VQDS, with a focus on ground-state preparation in one-dimensional Ising spin models using imaginary time evolution. We compare different regularization strategies for stabilizing the equations of motion and show that Tikhonov regularization provides robust performance in noisy imaginary-time evolution. We then benchmark measurement-distribution strategies that allocate shots by minimizing a cost function that characterizes the error in solving the equation of motion. Using noisy circuit simulations, we demonstrate that such optimized shot allocation can significantly improve state fidelity and reduce the total measurement cost by more than a factor of two compared to uniform shot distributions. We observe that the best results are found if a sufficiently large number of measurements is guaranteed for all circuits, suggesting that a finite fraction of shots should be distributed evenly. Our results provide practical guidelines for implementing measurement-efficient variational quantum dynamics and ground-state preparation on near-term quantum hardware.
High Resolution Image Download MS PowerPoint Slide We investigate the variational quantum eigensolver (VQE) for estimating the ground-state energy of the BeH 2 molecule, emphasizing practical implementation and performance on current quantum hardware. Our research presents a comparative study of HEA and UCCSD ansätze on noiseless and noisy simulations and implements VQE on recent IBM quantum computer noise models and a real quantum computer, IBM Fez, providing a fully functional code employing Qiskit 1.2 . Our experiments confirm UCCSD’s reliability in ideal conditions, while the HEA demonstrates greater robustness to hardware noise, achieving chemical accuracy on state-vector simulation (SVS). The results reveal that achieving ground-state energy within chemical accuracy is feasible without error mitigation during VQE convergence. We demonstrate that current quantum devices effectively optimize circuit parameters despite misestimating simulated energies. The SVS-evaluated energies provide a more accurate representation of the solution quality compared to QPU-estimated energy values, indicating that VQE converges to the correct ground state despite quantum noise. Our study also applies noise mitigation as a postprocessing technique, using zero-noise extrapolation (ZNE) on a real quantum computer. The detailed methodologies presented in this study, including Hamiltonian construction and Fermionic-to-qubit transformations, facilitate flexible adaptation of the VQE approach for various algorithm variants and across different levels of algorithmic implementation.
Recent practical approaches for the use of current generation noisy quantum devices in the simulation of quantum many-body problems have been dominated by the use of a variational quantum eigensolver (VQE). These coupled quantum-classical algorithms leverage the ability to perform many repeated measurements to avoid the currently prohibitive gate depths often required for exact quantum algorithms, with the restriction of a parametrized circuit to describe the states of interest. In this work, we show how the calculation of zero-temperature dynamic correlation functions defining the linear response characteristics of quantum systems can also be recast into a modified VQE algorithm, which can be incorporated into the current variational quantum infrastructure. This allows for these important physical expectation values describing the dynamics of the system to be directly converged on the frequency axis, and they approach exactness over all frequencies as the flexibility of the parametrization increases. The frequency resolution hence does not explicitly scale with gate depth, which is approximately twice as deep as a ground-state VQE. We apply the method to compute the single-particle Green's function of ab initio dihydrogen and lithium hydride molecules, and demonstrate the use of a practical active space embedding approach to extend to larger systems. While currently limited by the fidelity of two-qubit gates, whose number is increased compared to the ground-state algorithm on current devices, we believe the approach shows potential for the extraction of frequency dynamics of correlated systems on near-term quantum processors.