Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.21374

Generative Decoding for Quantum Error-correcting Codes

Hanyan Cao, Feng Ping Pan, Dongyang Feng, Yijia Wang, Pan Zhang

Published Mar 27, 2025• 18 citations
arXivHTMLPDF

Abstract

Efficient and accurate decoding of quantum error-correcting codes is essential for fault-tolerant quantum computation, however, it is challenging due to the degeneracy of errors, the complex code topology, and the large space for logical operators in high-rate codes. In this work, we propose a decoding algorithm utilizing generative modeling in machine learning. We employ autoregressive neural networks to learn the joint probability of logical operators and syndromes in an unsupervised manner, eliminating the need for labeled training data. The learned model can approximately perform maximum likelihood decoding by directly generating the most likely logical operators for $k$ logical qubits with $\mathcal O(2k)$ computational complexity. Thus, it is particularly efficient for decoding high-rate codes with many logical qubits. The proposed approach is general and applies to a wide spectrum of quantum error-correcting codes including surface codes and quantum low-density parity-check codes (qLDPC), under noise models ranging from code capacity noise to circuit level noise. We conducted extensive numerical experiments to demonstrate that our approach achieves significantly higher decoding accuracy compared to the minimum weight perfect matching and belief propagation with ordered statistics on the surface codes and high-rate quantum low-density parity-check codes. Our approach highlights generative artificial intelligence as a potential solution for the real-time decoding of realistic and high-rate quantum error correction codes.

DOI
10.48550/arxiv.2503.21374

Related papers

Maximum Likelihood Decoding of Quantum Error Correction Codes

Hanyan Cao, Ge Yan, Yuxuan Du +1 more

Quantum error correction (QEC) is indispensable for realizing fault-tolerant quantum computation, yet its effectiveness hinges critically on the classical decoding algorithm that interprets noisy syndrome measurements. Among all possible decoding strategies, maximum likelihood decoding (MLD) is provably optimal, since it identifies the logical group with largest likelihood by summing over all possible errors within logical class consistent with the observed syndrome. Despite its optimality, MLD is computationally intractable in general (#P-hard), motivating a rich landscape of exact and approximate algorithms. In this topical review, we provide a unified perspective on MLD by surveying recent advances through three complementary lenses: statistical mechanics, tensor networks, and artificial intelligence. From the statistical mechanics viewpoint, the MLD problem maps onto evaluating partition functions of disordered spin models, enabling exact solutions for certain codes and noise models as well as threshold estimation via phase-transition analysis. From the tensor network perspective, approximate contraction of tensor networks on the code's factor graph yields decoders that closely approach MLD accuracy with polynomial computational cost. From the artificial intelligence perspective, neural-network-based decoders, including autoregressive generative models and recurrent transformers, learn to approximate the MLD distribution from data, achieving high accuracy with the parallelism afforded by modern hardware accelerators. We discuss the connections among these three approaches, review their application to both simulated and experimental quantum hardware, and outline open challenges including real-time decoding, scalability to large code distances, and generalization to high-rate quantum low-density parity-check codes.

quant-pharXiv:2605.17230•May 19, 2026•5 citations

qecGPT: decoding Quantum Error-correcting Codes with Generative Pre-trained Transformers

Hanyan Cao, Pan, Feng, Yijia Wang +1 more

We propose a general framework for decoding quantum error-correcting codes with generative modeling. The model utilizes autoregressive neural networks, specifically Transformers, to learn the joint probability of logical operators and syndromes. This training is in an unsupervised way, without the need for labeled training data, and is thus referred to as pre-training. After the pre-training, the model can efficiently compute the likelihood of logical operators for any given syndrome, using maximum likelihood decoding. It can directly generate the most-likely logical operators with computational complexity $\mathcal O(2k)$ in the number of logical qubits $k$, which is significantly better than the conventional maximum likelihood decoding algorithms that require $\mathcal O(4^k)$ computation. Based on the pre-trained model, we further propose refinement to achieve more accurately the likelihood of logical operators for a given syndrome by directly sampling the stabilizer operators. We perform numerical experiments on stabilizer codes with small code distances, using both depolarizing error models and error models with correlated noise. The results show that our approach provides significantly better decoding accuracy than the minimum weight perfect matching and belief-propagation-based algorithms. Our framework is general and can be applied to any error model and quantum codes with different topologies such as surface codes and quantum LDPC codes. Furthermore, it leverages the parallelization capabilities of GPUs, enabling simultaneous decoding of a large number of syndromes. Our approach sheds light on the efficient and accurate decoding of quantum error-correcting codes using generative artificial intelligence and modern computational power.

arXiv:2307.09025•Jul 18, 2023•35 citations

Learning high-accuracy error decoding for quantum processors

Johannes Bausch, Andrew Senior, Francisco J. H. Heras +15 more

Abstract Building a large-scale quantum computer requires effective strategies to correct errors that inevitably arise in physical quantum systems 1 . Quantum error-correction codes 2 present a way to reach this goal by encoding logical information redundantly into many physical qubits. A key challenge in implementing such codes is accurately decoding noisy syndrome information extracted from redundancy checks to obtain the correct encoded logical information. Here we develop a recurrent, transformer-based neural network that learns to decode the surface code, the leading quantum error-correction code 3 . Our decoder outperforms other state-of-the-art decoders on real-world data from Google’s Sycamore quantum processor for distance-3 and distance-5 surface codes 4 . On distances up to 11, the decoder maintains its advantage on simulated data with realistic noise including cross-talk and leakage, utilizing soft readouts and leakage information. After training on approximate synthetic data, the decoder adapts to the more complex, but unknown, underlying error distribution by training on a limited budget of experimental samples. Our work illustrates the ability of machine learning to go beyond human-designed algorithms by learning from data directly, highlighting machine learning as a strong contender for decoding in quantum computers.

arXiv:2310.05900•Nature•Nov 20, 2024•195 citations

Decoding the surface code using graph neural networks

Moritz Lange

Quantum error correction is essential to achieve fault-tolerant quantum computation in the presence of noisy qubits. Among the most promising approaches to quantum error correction is the surface code, thanks to a scalable two-dimensional architecture, only nearest-neighbor interactions, and a high error threshold. Decoding the surface code, i.e. finding the most likely error chain given a syndrome measurement outcome is a computationally complex task. Traditional decoders rely on classical algorithms, which, especially for larger systems, can be slow and may not always converge to the optimal solution. This thesis presents a novel approach to decoding the surface code using graph neural networks. By mapping the syndrome measurements to a graph and performing graph classification, we find that the graph neural networks can predict the most likely error configuration with high accuracy. Our results show that the GNN-based decoder outperforms the classic minimum weight perfect matching (MWPM) decoder in terms of accuracy. With a phenomenological noise model with depolarizing noise and perfect syndrome measurements, our networks beat MWPM up to code-size 15 across all relevant error rates. Furthermore, the GNN is capable of surpassing MWPM under circuit-level noise up to code size 7. We also show that training the network on repetition code data from a recent experiment [Google Quantum AI, Nature 614, 676 (2023)] produces per-step error rates comparable to those achieved with a matching decoder specifically adapted to the error rates of the physical qubits. This indicates that graph neural network decoders are capable of learning the underlying error distribution on the qubits. Our findings advance the field of quantum error correction and provide a promising new direction for the development of efficient decoding algorithms.

•Oct 17, 2023•0 citations

Efficient Decoding of Surface Code Syndromes for Error Correction in Quantum Computing

Debasmita Bhoumik, Pinaki Sen, Ritajit Majumdar +3 more

Errors in surface code have typically been decoded by Minimum Weight Perfect Matching (MWPM) based method. Recently, neural-network-based Machine Learning (ML) techniques have been employed for this purpose. Here we propose a two-level (low and high) ML-based decoding scheme, where the first level corrects errors on physical qubits and the second one corrects any existing logical errors, for different noise models. Our results show that our proposed decoding method achieves $\sim10 \times$ and $\sim2 \times$ higher values of pseudo-threshold and threshold respectively, than for MWPM. We show that usage of more sophisticated ML models with higher training/testing time, do not provide significant improvement in the decoder performance. Finally, data generation for training the ML decoder requires significant overhead hence lower volume of training data is desirable. We have shown that our decoder maintains a good performance with the train-test-ratio as low as $40:60$.

arXiv:2110.10896•Oct 21, 2021•12 citations

Optimal Decoding of Small Codes by Density Matrix Propagation

Anthony Benois, Pierre Cussenot, Grégoire Misguich +2 more

Accurate and efficient decoding is a crucial component for achieving fault-tolerant quantum computing. Realistic circuit-level noise introduces temporal correlations and degeneracy, making optimal (maximum-likelihood) decoding computationally intractable in general. As a result, practical decoders rely on heuristic approximations, and it is generally difficult to quantify how suboptimal they are, as this strongly depends on the code and noise model considered. In this work, we study the accuracy of practical decoding algorithms under circuit-level noise by comparing them against a maximum likelihood decoding benchmark. Our approach propagates the density matrix through the full memory experiment and computes the optimal decoding decision for each syndrome history. We introduce pruning techniques with rigorous bounds, allowing us to access larger numbers of syndrome-extraction rounds. We apply this framework to small instances of the repetition code and a cellular automaton code, and benchmark minimum-weight perfect matching (MWPM), belief propagation with ordered statistics decoding (BP+OSD), Tesseract, and Planar decoders against optimal decoding. While standard decoders remain close to optimal for the repetition code, we find significant deviations for the cellular automaton code, with BP+OSD deteriorating already in experimentally relevant noise regimes. Moreover, the pruning method developed here highlights that, at low physical error rates, only a narrow fraction of syndrome histories contributes significantly to the logical error rate.

quant-pharXiv:2606.14455•Jun 15, 2026•0 citations
Efficient and accurate decoding of quantum error-correcting codes is essential for fault-tolerant quantum computation, however, it is challenging due to the degeneracy of errors, the complex code topology, and the large space for logical operators in high-rate codes. In this work, we propose a decoding algorithm utilizing generative modeling in machine learning. We employ autoregressive neural networks to learn the joint probability of logical operators and syndromes in an unsupervised manner, eliminating the need for labeled training data. The learned model can approximately perform maximum likelihood decoding by directly generating the most likely logical operators for kkk logical qubits with O(2k)\mathcal O(2k)O(2k) computational complexity. Thus, it is particularly efficient for decoding high-rate codes with many logical qubits. The proposed approach is general and applies to a wide spectrum of quantum error-correcting codes including surface codes and quantum low-density parity-check codes (qLDPC), under noise models ranging from code capacity noise to circuit level noise. We conducted extensive numerical experiments to demonstrate that our approach achieves significantly higher decoding accuracy compared to the minimum weight perfect matching and belief propagation with ordered statistics on the surface codes and high-rate quantum low-density parity-check codes. Our approach highlights generative artificial intelligence as a potential solution for the real-time decoding of realistic and high-rate quantum error correction codes.
Quantum error correction (QEC) is indispensable for realizing fault-tolerant quantum computation, yet its effectiveness hinges critically on the classical decoding algorithm that interprets noisy syndrome measurements. Among all possible decoding strategies, maximum likelihood decoding (MLD) is provably optimal, since it identifies the logical group with largest likelihood by summing over all possible errors within logical class consistent with the observed syndrome. Despite its optimality, MLD is computationally intractable in general (#P-hard), motivating a rich landscape of exact and approximate algorithms. In this topical review, we provide a unified perspective on MLD by surveying recent advances through three complementary lenses: statistical mechanics, tensor networks, and artificial intelligence. From the statistical mechanics viewpoint, the MLD problem maps onto evaluating partition functions of disordered spin models, enabling exact solutions for certain codes and noise models as well as threshold estimation via phase-transition analysis. From the tensor network perspective, approximate contraction of tensor networks on the code's factor graph yields decoders that closely approach MLD accuracy with polynomial computational cost. From the artificial intelligence perspective, neural-network-based decoders, including autoregressive generative models and recurrent transformers, learn to approximate the MLD distribution from data, achieving high accuracy with the parallelism afforded by modern hardware accelerators. We discuss the connections among these three approaches, review their application to both simulated and experimental quantum hardware, and outline open challenges including real-time decoding, scalability to large code distances, and generalization to high-rate quantum low-density parity-check codes.
We propose a general framework for decoding quantum error-correcting codes with generative modeling. The model utilizes autoregressive neural networks, specifically Transformers, to learn the joint probability of logical operators and syndromes. This training is in an unsupervised way, without the need for labeled training data, and is thus referred to as pre-training. After the pre-training, the model can efficiently compute the likelihood of logical operators for any given syndrome, using maximum likelihood decoding. It can directly generate the most-likely logical operators with computational complexity O(2k)\mathcal O(2k)O(2k) in the number of logical qubits kkk, which is significantly better than the conventional maximum likelihood decoding algorithms that require O(4k)\mathcal O(4^k)O(4k) computation. Based on the pre-trained model, we further propose refinement to achieve more accurately the likelihood of logical operators for a given syndrome by directly sampling the stabilizer operators. We perform numerical experiments on stabilizer codes with small code distances, using both depolarizing error models and error models with correlated noise. The results show that our approach provides significantly better decoding accuracy than the minimum weight perfect matching and belief-propagation-based algorithms. Our framework is general and can be applied to any error model and quantum codes with different topologies such as surface codes and quantum LDPC codes. Furthermore, it leverages the parallelization capabilities of GPUs, enabling simultaneous decoding of a large number of syndromes. Our approach sheds light on the efficient and accurate decoding of quantum error-correcting codes using generative artificial intelligence and modern computational power.
Abstract Building a large-scale quantum computer requires effective strategies to correct errors that inevitably arise in physical quantum systems 1 . Quantum error-correction codes 2 present a way to reach this goal by encoding logical information redundantly into many physical qubits. A key challenge in implementing such codes is accurately decoding noisy syndrome information extracted from redundancy checks to obtain the correct encoded logical information. Here we develop a recurrent, transformer-based neural network that learns to decode the surface code, the leading quantum error-correction code 3 . Our decoder outperforms other state-of-the-art decoders on real-world data from Google’s Sycamore quantum processor for distance-3 and distance-5 surface codes 4 . On distances up to 11, the decoder maintains its advantage on simulated data with realistic noise including cross-talk and leakage, utilizing soft readouts and leakage information. After training on approximate synthetic data, the decoder adapts to the more complex, but unknown, underlying error distribution by training on a limited budget of experimental samples. Our work illustrates the ability of machine learning to go beyond human-designed algorithms by learning from data directly, highlighting machine learning as a strong contender for decoding in quantum computers.
Quantum error correction is essential to achieve fault-tolerant quantum computation in the presence of noisy qubits. Among the most promising approaches to quantum error correction is the surface code, thanks to a scalable two-dimensional architecture, only nearest-neighbor interactions, and a high error threshold. Decoding the surface code, i.e. finding the most likely error chain given a syndrome measurement outcome is a computationally complex task. Traditional decoders rely on classical algorithms, which, especially for larger systems, can be slow and may not always converge to the optimal solution. This thesis presents a novel approach to decoding the surface code using graph neural networks. By mapping the syndrome measurements to a graph and performing graph classification, we find that the graph neural networks can predict the most likely error configuration with high accuracy. Our results show that the GNN-based decoder outperforms the classic minimum weight perfect matching (MWPM) decoder in terms of accuracy. With a phenomenological noise model with depolarizing noise and perfect syndrome measurements, our networks beat MWPM up to code-size 15 across all relevant error rates. Furthermore, the GNN is capable of surpassing MWPM under circuit-level noise up to code size 7. We also show that training the network on repetition code data from a recent experiment [Google Quantum AI, Nature 614, 676 (2023)] produces per-step error rates comparable to those achieved with a matching decoder specifically adapted to the error rates of the physical qubits. This indicates that graph neural network decoders are capable of learning the underlying error distribution on the qubits. Our findings advance the field of quantum error correction and provide a promising new direction for the development of efficient decoding algorithms.
Errors in surface code have typically been decoded by Minimum Weight Perfect Matching (MWPM) based method. Recently, neural-network-based Machine Learning (ML) techniques have been employed for this purpose. Here we propose a two-level (low and high) ML-based decoding scheme, where the first level corrects errors on physical qubits and the second one corrects any existing logical errors, for different noise models. Our results show that our proposed decoding method achieves ∼10×\sim10 \times∼10× and ∼2×\sim2 \times∼2× higher values of pseudo-threshold and threshold respectively, than for MWPM. We show that usage of more sophisticated ML models with higher training/testing time, do not provide significant improvement in the decoder performance. Finally, data generation for training the ML decoder requires significant overhead hence lower volume of training data is desirable. We have shown that our decoder maintains a good performance with the train-test-ratio as low as 40:6040:6040:60.
Accurate and efficient decoding is a crucial component for achieving fault-tolerant quantum computing. Realistic circuit-level noise introduces temporal correlations and degeneracy, making optimal (maximum-likelihood) decoding computationally intractable in general. As a result, practical decoders rely on heuristic approximations, and it is generally difficult to quantify how suboptimal they are, as this strongly depends on the code and noise model considered. In this work, we study the accuracy of practical decoding algorithms under circuit-level noise by comparing them against a maximum likelihood decoding benchmark. Our approach propagates the density matrix through the full memory experiment and computes the optimal decoding decision for each syndrome history. We introduce pruning techniques with rigorous bounds, allowing us to access larger numbers of syndrome-extraction rounds. We apply this framework to small instances of the repetition code and a cellular automaton code, and benchmark minimum-weight perfect matching (MWPM), belief propagation with ordered statistics decoding (BP+OSD), Tesseract, and Planar decoders against optimal decoding. While standard decoders remain close to optimal for the repetition code, we find significant deviations for the cellular automaton code, with BP+OSD deteriorating already in experimentally relevant noise regimes. Moreover, the pruning method developed here highlights that, at low physical error rates, only a narrow fraction of syndrome histories contributes significantly to the logical error rate.