Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.19341 · Quantum Science and Technology

Leveraging quantum statistics to enhance heat engines

Keerthy Menon, Thomas Busch, Thomás Fogarty

Published Sep 2, 2025• 5 citations
arXivHTMLPDF

Abstract

Abstract A key focus of designing quantum thermal devices is the potential advantage that can be gleaned from genuine quantum effects when compared to classical devices. The recent experimental realization of the Pauli engine (Koch et al 2023 Nature 621 723)—where energy is extracted via changes in particle statistics as an alternative to conventional heat sources—has opened new avenues of research where quantum statistics can be considered as a thermodynamic resource. In this work we propose hybrid quantum heat engines which can utilize additional strokes that change the single particle statistics between bosonic and fermionic descriptions during the cycle. To accomplish this we consider the 1D Lieb–Liniger gas, in which the s-wave interactions can be tuned between the non-interacting and the hard-core limit, which are described by bosonic and fermionic statistics respectively. We show that by suitably choosing where to implement these statistical strokes during an Otto-like cycle in the quasi-static limit, the efficiency and work output can be significantly enhanced when compared to fully bosonic or fully fermionic engines. Furthermore, in the degenerate regime our engine can operate at the Carnot efficiency, due to the interplay between the different contributions of heat and work induced by the statistical strokes. Finally, we highlight how our thermodynamic cycles can realize other thermal operations, such as refrigerators, promising similar statistical enhancements for a wide range of temperatures.

DOI
10.1088/2058-9565/ae01d3

Related papers

A quantum engine in the BEC–BCS crossover

Jennifer Koch, Keerthy Menon, Eloisa Cuestas +5 more

Abstract Heat engines convert thermal energy into mechanical work both in the classical and quantum regimes1. However, quantum theory offers genuine non-classical forms of energy, different from heat, which so far have not been exploited in cyclic engines. Here we experimentally realize a quantum many-body engine fuelled by the energy difference between fermionic and bosonic ensembles of ultracold particles that follows from the Pauli exclusion principle2. We employ a harmonically trapped superfluid gas of6Li atoms close to a magnetic Feshbach resonance3that allows us to effectively change the quantum statistics from Bose–Einstein to Fermi–Dirac, by tuning the gas between a Bose–Einstein condensate of bosonic molecules and a unitary Fermi gas (and back) through a magnetic field4–10. The quantum nature of such a Pauli engine is revealed by contrasting it with an engine in the classical thermal regime and with a purely interaction-driven device. We obtain a work output of several 106vibrational quanta per cycle with an efficiency of up to 25%. Our findings establish quantum statistics as a useful thermodynamic resource for work production.

arXiv:2209.14202•Nature•Sep 27, 2023•70 citations

Quantum Statistical Thermal Engine at the BCS-BEC crossover

Santiago Henríquez Lira, Felipe Isaule, Martín HvE Groves +3 more

We propose a quantum heat engine based on a two-component Fermi gas with s-wave contact interaction, operating across the BCS-BEC crossover. The work is extracted from the statistical properties of the gas, which are controlled by the interaction, rather than relying solely on compression and expansion stages. Using the functional renormalization group formalism, we obtain the equation of state in a non-perturbative form along the crossover, encompassing the superfluid-normal phase transition. The cycle combines isentropic density strokes, isochoric thermalization, and isothermal interaction sweeps. This construction makes it possible to integrate features of both Otto and Carnot cycles, in which the system simultaneously saturates both efficiency limits without the net work vanishing. In the absence of density variations, the cycle reduces to a statistical Stirling-like engine, in which the work generated arises exclusively from the interaction, achieving efficiencies up to $38\%$. A pronounced asymmetry emerges through the crossover, giving rise to distinct operating regimes depending on the trajectory followed in the phase diagram. Consequently, the same architecture can be tuned to function as an engine, refrigerator, accelerator, or heater. These findings highlight pairing correlations as a versatile thermodynamic resource for quantum heat machines.

cond-mat.stat-mechCross-listedarXiv:2609.37592•Sep 30, 2026•0 citations

A quantum hybrid heat engine fueled jointly by non-selective weak measurements and thermal baths: An analysis of three cycle modes

Chao-Quan Wang

Quantum heat engines, compared to their classical counterparts, offer many advantages due to quantum effects. The study of different cycle modes contributes to the improvement of heat engine efficiency. In this paper, based on a quantum hybrid heat engine, we compare three cycle modes involving Bell-type quantum weak measurement (without observing the results) and two heat baths at different temperatures, where quantum weak measurements play the role of heat source. Thus, there are two types of heat sources and three processes involving heat absorption or release in our model. In other words, we study a multi-stroke quantum hybrid heat engine. Moreover, we further investigate three types of cycle modes using a working substance composed of a three-particle XXZ spin chain. In the adiabatic stroke, we select three Hamiltonian parameters and vary them adiabatically from their initial to final values, comparing their effects on engine efficiency. In particular, we examine how the ordering of the weak-measurement stroke and the adiabatic stroke influences heat absorption, heat release, and engine efficiency. Additionally, we analyze the impact of the high-temperature bath’s temperature and the weak-measurement strength on the engine efficiency.

Modern Physics Letters A•Feb 27, 2026•0 citations

Quantum many-body thermal machines enabled by atom-atom correlations

Raymon S. Watson, Karen V. Kheruntsyan

Particle-particle correlations, characterized by Glauber’s second-order correlation function, play an important role in the understanding of various phenomena in radio and optical astronomy, quantum and atom optics, particle physics, condensed matter physics, and quantum many-body theory. However, the relevance of such correlations to quantum thermodynamics has so far remained illusive. Here, we propose and investigate a class of quantum many-body thermal machines whose operation is directly enabled by second-order atom-atom correlations in an ultracold atomic gas. More specifically, we study quantum thermal machines that operate in a sudden interaction-quench Otto cycle and utilize a one-dimensional Lieb-Liniger gas of repulsively interacting bosons as the working fluid. The atom-atom correlations in such a gas are different to those of a classical ideal gas, and are a result of the interplay between interparticle interactions, quantum statistics, and thermal fluctuations. We show that operating these thermal machines in the intended regimes, such as a heat engine, refrigerator, thermal accelerator, or heater, would be impossible without such atom-atom correlations. Our results constitute a step forward in the design of conceptually new quantum thermodynamic devices which take advantage of uniquely quantum resources such as quantum coherence, correlations, and entanglement.

arXiv:2308.05266•SciPost Physics•Jun 16, 2025•17 citations

Efficiency fluctuations in quantum heat engines with non-quasi-static adiabatic strokes

Bikram Keshari Behera, Shyamal Biswas

We have presented an analytical and numerical study of efficiency fluctuations in quantum Carnot and Otto engines with pistons operating under non-quasi-static adiabatic expansion and compression processes at constant speed, along with quasi-static isothermal (for the Carnot engine) or isochoric processes (for the Otto engine). We have considered the two-point measurement scheme during the adiabatic strokes in this regard. By considering each of the pistons as a single quantum particle in a 1-D box with a non-quasi-statically movable boundary, we capture the stochastic nature of the work output resulting from the unitary evolution of the quantum mechanical state of the system during non-equilibrium processes. Furthermore, we have explicitly shown how the piston speed during quantum non-equilibrium strokes introduces additional quantum fluctuations that modify the average efficiency of both the engines.

arXiv:2610.10647•Oct 7, 2026•0 citations

Classical field simulations of a one-dimensional Bose gas as a working fluid for many-body heat engines

Vijit V. Nautiyal

The development of the theory of thermodynamics dates back nearly two centuries, to when the need arose to comprehend and enhance the performance of a novel technology of that era, the heat engine. Extending the classical concepts related to the properties of heat and work into the quantum realm forms the foundation of an emerging field of research known as quantum thermodynamics. To unify the disparate theories of classical thermodynamics and quantum mechanics, a thoroughly developed theoretical framework is necessary. Quantum heat engines provide a fundamental platform for this purpose. Many-body quantum heat engines, in particular, can provide important insights into the potential utilisation of exotic quantum phenomena, such as entanglement and quantum coherence, for building quantum devices that can surpass their classical counterparts in performance. One-dimensional (1D) Bose gases are a paradigmatic example of an interacting quantum many-body system that can be used as a versatile platform for building heat engines to test the thermodynamic theories in the quantum regime. The versatility of this platform comes through the routine experimental realisability of 1D Bose gases, with precise control of their internal and external properties, such as the strength of inter-atomic interactions and external confinement, and the presence of quantum many-body effects. In recent years, there has been an increased focus on exploiting the unique properties of ultracold atomic gases to realize many-body quantum heat engines. Despite this heightened attention and the resulting significant advances at the level of theoretical proposals, experimental feasibility and practical utilization of such engines remains at its infancy. Achieving significant advances at the experimental level requires a deeper understanding of the fundamental components of quantum-gas heat engines. Motivated by this goal, in this thesis we propose a novel and experimentally realistic quantum many-body heat engine that operates in an Otto cycle and uses a weakly interacting harmonically trapped 1D Bose gas as a working fluid. To execute work during the work strokes, we use a quench of the strength of interparticle interactions; when the quench is sudden with respect to the longitudinal dynamics, it maximises the power output. The interaction-induced work strokes are implemented by treating the working fluid as an isolated quantum many-body system undergoing a dynamical evolution starting from a finite temperature thermal equilibrium state. Furthermore, to optimize the performance of this interaction-driven quantum Otto cycle in an experimental scenario, we undertake a comprehensive numerical investigation of the dynamics of the system-reservoir coupling during the heat transfer strokes. We model the heat transfer strokes by treating the working substance as an open quantum many-body system that is coupled to a reservoir.After providing an overview of recent advances in the field of quantum thermodynamics and the background theory of 1D Bose gases in Chapters 1 and 2 we present the main results of this thesis in Chapters 3, 4 and 5. In Chapter 3, we study the individual interaction-induced work strokes of the Otto cycle with a weakly interacting 1D Bose gas as the working fluid. We evaluate the instantaneity of the sudden quench, specifically, identifying the minimum timescales required to perform the sudden quench of the interaction strength without invoking the transverse dynamics. Knowledge of these timescales enables us to perform the sudden quench in an experimental setting while ensuring that the system retains its 1D characteristics and the theory of 1D Bose gas is applicable. Additionally, we determine the time scales governing the opposite scenario of near-adiabatic quench which corresponds to minimum irreversible work in the engine cycle and hence maximum efficiency. This will help us benchmark the sudden quench engine's performance compared to a nearly ideal (near-adiabatic) scenario corresponding to maximum efficiency.Next, in Chapter 4, we analyze the heat transfer strokes of the Otto cycle, where the system is coupled to a reservoir. Using the c-field approach, we simulate the coupling dynamics of the system with both finite and infinite-size reservoirs. During the heat transfer stroke of the quantum Otto cycle, we treat the working fluid as an open quantum many-body system that is in thermal and diffusive contact with another quantum many-body system serving as the reservoir. In our real-time dynamical simulations of the engine strokes, we use a c-field approach based on the stochastic projected Gross-Pitaevskii equation. This approach enables us to treat both the working fluid and the hot and cold reservoirs as independent quantum many-body systems with chemical potential and temperature imbalances. To model the heat transfer strokes of such an engine with a finite-size reservoir, we use a tunnel-coupled model of two quasicondensates that treats both the system and the reservoir microscopically. Our analysis incorporates the impact of both finite-time operation and finite-size reservoirs in the engine cycle to gain a deeper understanding of the operational feasibility of such engines. Our results indicate that, in contrast to the common assumption of near-instantaneous heat transfer between the system and the reservoir, the thermalisation time of the system during these heat transfer strokes is non-negligible when compared to the duration of work strokes even in the near-adiabatic quench. This observation holds true even in the case of coupling the system with an infinite reservoir during the heat transfer strokes. Moreover, we demonstrate that for a finite-size reservoir, the initial dynamics (namely fast initial energy transfer) in the tunnel-coupled model of two quasicondensates can be leveraged to reduce the total driving time and hence increase the power output of the engine. Finally, in Chapter 5, we explore an alternate protocol that involves performing chemical work on the system during the heat transfer strokes to boost the efficiency and power output of the quantum Otto engines with a 1D Bose gas as a working fluid. We compare the performance of the sudden quench engine with an engine driven by a near-adiabatic and a finite-time quench of the interaction strength with respect to the longitudinal dynamics. We then conclude the thesis by summarising our main findings and presenting open questions for future work in the final chapter, Chapter 6.

•Feb 9, 2024•0 citations
Abstract A key focus of designing quantum thermal devices is the potential advantage that can be gleaned from genuine quantum effects when compared to classical devices. The recent experimental realization of the Pauli engine (Koch et al 2023 Nature 621 723)—where energy is extracted via changes in particle statistics as an alternative to conventional heat sources—has opened new avenues of research where quantum statistics can be considered as a thermodynamic resource. In this work we propose hybrid quantum heat engines which can utilize additional strokes that change the single particle statistics between bosonic and fermionic descriptions during the cycle. To accomplish this we consider the 1D Lieb–Liniger gas, in which the s-wave interactions can be tuned between the non-interacting and the hard-core limit, which are described by bosonic and fermionic statistics respectively. We show that by suitably choosing where to implement these statistical strokes during an Otto-like cycle in the quasi-static limit, the efficiency and work output can be significantly enhanced when compared to fully bosonic or fully fermionic engines. Furthermore, in the degenerate regime our engine can operate at the Carnot efficiency, due to the interplay between the different contributions of heat and work induced by the statistical strokes. Finally, we highlight how our thermodynamic cycles can realize other thermal operations, such as refrigerators, promising similar statistical enhancements for a wide range of temperatures.
Abstract Heat engines convert thermal energy into mechanical work both in the classical and quantum regimes1. However, quantum theory offers genuine non-classical forms of energy, different from heat, which so far have not been exploited in cyclic engines. Here we experimentally realize a quantum many-body engine fuelled by the energy difference between fermionic and bosonic ensembles of ultracold particles that follows from the Pauli exclusion principle2. We employ a harmonically trapped superfluid gas of6Li atoms close to a magnetic Feshbach resonance3that allows us to effectively change the quantum statistics from Bose–Einstein to Fermi–Dirac, by tuning the gas between a Bose–Einstein condensate of bosonic molecules and a unitary Fermi gas (and back) through a magnetic field4–10. The quantum nature of such a Pauli engine is revealed by contrasting it with an engine in the classical thermal regime and with a purely interaction-driven device. We obtain a work output of several 106vibrational quanta per cycle with an efficiency of up to 25%. Our findings establish quantum statistics as a useful thermodynamic resource for work production.
We propose a quantum heat engine based on a two-component Fermi gas with s-wave contact interaction, operating across the BCS-BEC crossover. The work is extracted from the statistical properties of the gas, which are controlled by the interaction, rather than relying solely on compression and expansion stages. Using the functional renormalization group formalism, we obtain the equation of state in a non-perturbative form along the crossover, encompassing the superfluid-normal phase transition. The cycle combines isentropic density strokes, isochoric thermalization, and isothermal interaction sweeps. This construction makes it possible to integrate features of both Otto and Carnot cycles, in which the system simultaneously saturates both efficiency limits without the net work vanishing. In the absence of density variations, the cycle reduces to a statistical Stirling-like engine, in which the work generated arises exclusively from the interaction, achieving efficiencies up to 38%38\%38%. A pronounced asymmetry emerges through the crossover, giving rise to distinct operating regimes depending on the trajectory followed in the phase diagram. Consequently, the same architecture can be tuned to function as an engine, refrigerator, accelerator, or heater. These findings highlight pairing correlations as a versatile thermodynamic resource for quantum heat machines.
Quantum heat engines, compared to their classical counterparts, offer many advantages due to quantum effects. The study of different cycle modes contributes to the improvement of heat engine efficiency. In this paper, based on a quantum hybrid heat engine, we compare three cycle modes involving Bell-type quantum weak measurement (without observing the results) and two heat baths at different temperatures, where quantum weak measurements play the role of heat source. Thus, there are two types of heat sources and three processes involving heat absorption or release in our model. In other words, we study a multi-stroke quantum hybrid heat engine. Moreover, we further investigate three types of cycle modes using a working substance composed of a three-particle XXZ spin chain. In the adiabatic stroke, we select three Hamiltonian parameters and vary them adiabatically from their initial to final values, comparing their effects on engine efficiency. In particular, we examine how the ordering of the weak-measurement stroke and the adiabatic stroke influences heat absorption, heat release, and engine efficiency. Additionally, we analyze the impact of the high-temperature bath’s temperature and the weak-measurement strength on the engine efficiency.
Particle-particle correlations, characterized by Glauber’s second-order correlation function, play an important role in the understanding of various phenomena in radio and optical astronomy, quantum and atom optics, particle physics, condensed matter physics, and quantum many-body theory. However, the relevance of such correlations to quantum thermodynamics has so far remained illusive. Here, we propose and investigate a class of quantum many-body thermal machines whose operation is directly enabled by second-order atom-atom correlations in an ultracold atomic gas. More specifically, we study quantum thermal machines that operate in a sudden interaction-quench Otto cycle and utilize a one-dimensional Lieb-Liniger gas of repulsively interacting bosons as the working fluid. The atom-atom correlations in such a gas are different to those of a classical ideal gas, and are a result of the interplay between interparticle interactions, quantum statistics, and thermal fluctuations. We show that operating these thermal machines in the intended regimes, such as a heat engine, refrigerator, thermal accelerator, or heater, would be impossible without such atom-atom correlations. Our results constitute a step forward in the design of conceptually new quantum thermodynamic devices which take advantage of uniquely quantum resources such as quantum coherence, correlations, and entanglement.
We have presented an analytical and numerical study of efficiency fluctuations in quantum Carnot and Otto engines with pistons operating under non-quasi-static adiabatic expansion and compression processes at constant speed, along with quasi-static isothermal (for the Carnot engine) or isochoric processes (for the Otto engine). We have considered the two-point measurement scheme during the adiabatic strokes in this regard. By considering each of the pistons as a single quantum particle in a 1-D box with a non-quasi-statically movable boundary, we capture the stochastic nature of the work output resulting from the unitary evolution of the quantum mechanical state of the system during non-equilibrium processes. Furthermore, we have explicitly shown how the piston speed during quantum non-equilibrium strokes introduces additional quantum fluctuations that modify the average efficiency of both the engines.
The development of the theory of thermodynamics dates back nearly two centuries, to when the need arose to comprehend and enhance the performance of a novel technology of that era, the heat engine. Extending the classical concepts related to the properties of heat and work into the quantum realm forms the foundation of an emerging field of research known as quantum thermodynamics. To unify the disparate theories of classical thermodynamics and quantum mechanics, a thoroughly developed theoretical framework is necessary. Quantum heat engines provide a fundamental platform for this purpose. Many-body quantum heat engines, in particular, can provide important insights into the potential utilisation of exotic quantum phenomena, such as entanglement and quantum coherence, for building quantum devices that can surpass their classical counterparts in performance. One-dimensional (1D) Bose gases are a paradigmatic example of an interacting quantum many-body system that can be used as a versatile platform for building heat engines to test the thermodynamic theories in the quantum regime. The versatility of this platform comes through the routine experimental realisability of 1D Bose gases, with precise control of their internal and external properties, such as the strength of inter-atomic interactions and external confinement, and the presence of quantum many-body effects. In recent years, there has been an increased focus on exploiting the unique properties of ultracold atomic gases to realize many-body quantum heat engines. Despite this heightened attention and the resulting significant advances at the level of theoretical proposals, experimental feasibility and practical utilization of such engines remains at its infancy. Achieving significant advances at the experimental level requires a deeper understanding of the fundamental components of quantum-gas heat engines. Motivated by this goal, in this thesis we propose a novel and experimentally realistic quantum many-body heat engine that operates in an Otto cycle and uses a weakly interacting harmonically trapped 1D Bose gas as a working fluid. To execute work during the work strokes, we use a quench of the strength of interparticle interactions; when the quench is sudden with respect to the longitudinal dynamics, it maximises the power output. The interaction-induced work strokes are implemented by treating the working fluid as an isolated quantum many-body system undergoing a dynamical evolution starting from a finite temperature thermal equilibrium state. Furthermore, to optimize the performance of this interaction-driven quantum Otto cycle in an experimental scenario, we undertake a comprehensive numerical investigation of the dynamics of the system-reservoir coupling during the heat transfer strokes. We model the heat transfer strokes by treating the working substance as an open quantum many-body system that is coupled to a reservoir.After providing an overview of recent advances in the field of quantum thermodynamics and the background theory of 1D Bose gases in Chapters 1 and 2 we present the main results of this thesis in Chapters 3, 4 and 5. In Chapter 3, we study the individual interaction-induced work strokes of the Otto cycle with a weakly interacting 1D Bose gas as the working fluid. We evaluate the instantaneity of the sudden quench, specifically, identifying the minimum timescales required to perform the sudden quench of the interaction strength without invoking the transverse dynamics. Knowledge of these timescales enables us to perform the sudden quench in an experimental setting while ensuring that the system retains its 1D characteristics and the theory of 1D Bose gas is applicable. Additionally, we determine the time scales governing the opposite scenario of near-adiabatic quench which corresponds to minimum irreversible work in the engine cycle and hence maximum efficiency. This will help us benchmark the sudden quench engine's performance compared to a nearly ideal (near-adiabatic) scenario corresponding to maximum efficiency.Next, in Chapter 4, we analyze the heat transfer strokes of the Otto cycle, where the system is coupled to a reservoir. Using the c-field approach, we simulate the coupling dynamics of the system with both finite and infinite-size reservoirs. During the heat transfer stroke of the quantum Otto cycle, we treat the working fluid as an open quantum many-body system that is in thermal and diffusive contact with another quantum many-body system serving as the reservoir. In our real-time dynamical simulations of the engine strokes, we use a c-field approach based on the stochastic projected Gross-Pitaevskii equation. This approach enables us to treat both the working fluid and the hot and cold reservoirs as independent quantum many-body systems with chemical potential and temperature imbalances. To model the heat transfer strokes of such an engine with a finite-size reservoir, we use a tunnel-coupled model of two quasicondensates that treats both the system and the reservoir microscopically. Our analysis incorporates the impact of both finite-time operation and finite-size reservoirs in the engine cycle to gain a deeper understanding of the operational feasibility of such engines. Our results indicate that, in contrast to the common assumption of near-instantaneous heat transfer between the system and the reservoir, the thermalisation time of the system during these heat transfer strokes is non-negligible when compared to the duration of work strokes even in the near-adiabatic quench. This observation holds true even in the case of coupling the system with an infinite reservoir during the heat transfer strokes. Moreover, we demonstrate that for a finite-size reservoir, the initial dynamics (namely fast initial energy transfer) in the tunnel-coupled model of two quasicondensates can be leveraged to reduce the total driving time and hence increase the power output of the engine. Finally, in Chapter 5, we explore an alternate protocol that involves performing chemical work on the system during the heat transfer strokes to boost the efficiency and power output of the quantum Otto engines with a 1D Bose gas as a working fluid. We compare the performance of the sudden quench engine with an engine driven by a near-adiabatic and a finite-time quench of the interaction strength with respect to the longitudinal dynamics. We then conclude the thesis by summarising our main findings and presenting open questions for future work in the final chapter, Chapter 6.