Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.17247 · Applied Physics Letters

High-quality superconducting tantalum resonators with beta phase defects

Ritika Dhundhwal, Haoran Duan, Lucas Brauch, Soroush Arabi, D. Fuchs, Amir A. Haghighirad, Alexander Welle, Florentine Scharwaechter, Sudip Pal, Marc Scheffler, José M. Palomo, Zaki Leghtas, Anil Murani, Horst Hahn, Jasmin Aghassi‐Hagmann, Christian Kuebel, Wulf Wulfhekel, Ioan M. Pop, Thomas J.G. Reisinger

Published Nov 24, 2025• 13 citations
arXivHTMLPDF

Abstract

For practical superconducting quantum processors, orders of magnitude improvement in coherence is required, motivating efforts to optimize hardware design and explore new materials. Among the latter, the coherence of superconducting transmon qubits has been shown to improve by forming the qubit capacitor pads from α-tantalum, avoiding the metastable β-phase that forms when depositing tantalum at room temperature, and has been previously identified to be a source of microwave losses. In this work, we show lumped element resonators containing β-phase tantalum in the form of inclusions near the metal–substrate interface with internal quality factors (Qi) up to 5.0 ± 2.5×106 in the single photon regime. They perform at least as good as resonators with no sign of the β-phase in x-ray diffraction and thermal quasi-particle loss. Our results indicate that small concentrations of β-phase can be beneficial, enhancing critical magnetic fields and potentially, for improving coherence in tantalum-based superconducting circuits.

DOI
10.1063/5.0302324

Related papers

Beta Tantalum Transmon Qubits with Quality Factors Approaching 10 Million

Atharv Joshi, Apoorv Jindal, Paal H. Prestegaard +9 more

Tantalum-based transmon qubits are a promising platform for building large-scale quantum processors. So far, these qubits have been made from tantalum films grown exclusively in the alpha phase (α-Ta). The beta phase of tantalum (\{beta}-Ta) readily nucleates at room temperature, making it attractive for scalable qubit fabrication. However, \{beta}-Ta is widely believed to be detrimental to qubit performance because it has a lower superconducting critical temperature than α-Ta. We challenge this prevailing belief by fabricating low-loss transmon qubits from \{beta}-Ta films on sapphire. Across 11 qubits, the mean time-averaged quality factor is (5.6 +/- 2.3) x 10^6, with the best qubit recording a time-averaged quality factor of (10.1 +/- 1.3) x 10^6. Resonator studies demonstrate that the dominant microwave loss channel is surface two-level systems, with the surface loss contribution for \{beta}-Ta being about twice that of α-Ta. \{beta}-Ta films exhibit significant kinetic inductance, consistent with an estimated magnetic penetration depth of (1.78 +/- 0.02) μm. This work establishes \{beta}-Ta on sapphire as a material platform for realizing low-loss transmon qubits and other superconducting devices such as compact resonators, kinetic inductance detectors, and quasiparticle traps.

quant-pharXiv:2603.13174•Mar 16, 2026•6 citations

Tantalum-Encapsulated Niobium Superconducting Resonators: High Internal Quality Factor and Improved Temporal Stability via Surface Passivation

Anas Alkhazaleh, Juan Villegas, Florent Ravaux +1 more

Superconducting coplanar waveguide resonators are essential components in quantum processors, where their internal quality factor (Qi) constrains qubit coherence and readout fidelity. In niobium devices, microwave losses at millikelvin temperatures are strongly influenced by two-level systems (TLS) associated with the complex NbOx surface oxide. To mitigate these losses, we investigate a surface-engineering approach in which Nb films are capped in situ with a thin tantalum layer to suppress Nb2O5 formation and replace the native NbOx interface with a Ta-based oxide. We fabricate Nb/Ta bilayer and reference Nb resonators on high-resistivity silicon using identical DC sputtering and wet etching conditions, and characterize their performance at millikelvin temperatures. Fresh Ta-encapsulated devices exhibit internal quality factors up to 2.4 x 10^6 in the near-single-photon regime, with power dependence consistent with reduced TLS-related loss at the metal-air interface. A control Nb device fabricated under the same process shows comparatively lower Q_TLS, consistent with the beneficial effect of the Ta capping layer. Furthermore, ageing tests performed on Nb/Ta resonators after six months reveal a moderate reduction in Q_TLS relative to their initial values, yet the performance remains superior to newly fabricated Nb-only devices. These results suggest that thin Ta encapsulation enhances interface quality and contributes to improved temporal stability while remaining compatible with Nb-based fabrication workflows.

quant-pharXiv:2604.09050•Apr 13, 2026•2 citations

Low-loss superconducting resonators fabricated from tantalum films grown at room temperature

Guillaume Marcaud, David Perello, Cliff Chen +16 more

Abstract The use of α -tantalum in superconducting circuits has enabled a considerable improvement in the coherence time of transmon qubits. The standard approach to grow α -tantalum thin films on silicon involves heating the substrate, which takes several hours per deposition and prevents the integration of this material with wafers containing temperature-sensitive components. We report a detailed experimental study of an alternative growth method of α -tantalum on silicon, which is achieved at room temperature through the use of a niobium seed layer. Despite a substantially higher density of oxygen-rich grain boundaries in the films sputtered at room temperature, resonators made from these films are found to have state-of-the-art quality factors, comparable to resonators fabricated from tantalum grown at high temperature. This finding challenges previous assumptions about correlations between material properties and microwave loss of superconducting thin films, and opens a new avenue for the integration of tantalum into fabrication flows with limited thermal budget.

arXiv:2501.09885•Communications Materials•Aug 16, 2025•26 citations

Investigation of tantalum films growth for coplanar resonators with internal quality factors above ten million

E. V. Zikiy, N. S. Smirnov, Elizaveta A. Krivko +13 more

Alpha-tantalum on silicon is a promising platform for high-coherence superconducting quantum circuits. However, the growth mechanism of alpha-tantalum on silicon remains poorly understood. We present a comprehensive study on alpha-tantalum film growth on various substrates. The decisive role of a substrate material Debye temperature on the phase selection mechanism in tantalum film growth is experimentally confirmed, contradicting the prior assumptions on substrate temperature influence. Crucially, we confirm that alpha-tantalum starts growing only after a 7–10- nm-thick beta-tantalum sublayer. It results in ranging the critical temperature of α-Ta films from 3.77 to 4.39 K for the total thickness from 20 to 150 nm, respectively. Finally, we compared high-quality Al and Ta coplanar resonators on silicon, demonstrating compact tantalum resonators (4/10.5/4 μm) with an internal quality factor exceeding 10 × 106 at single-photon excitation powers.

arXiv:2509.04917•Applied Physics Reviews•Jun 1, 2026•5 citations

Substrate-metal interface engineering enhances TaN/Ta thin film superconducting resonator performance

Moritz Singer, Harsh Gupta, Benedikt Schoof +6 more

Tantalum has been demonstrated as a promising material for superconducting qubits. However, comparatively little attention has been given to its nitrides. Tantalum nitride exhibits a range of stoichiometries, resulting in a variety of material properties, including both superconducting and non-superconducting phases. Owing to this versatility, tantalum nitrides can serve multiple purposes in superconducting qubits: as seed layers for alpha-Ta growth, as a superconducting base material and as a non-superconducting barrier in the Josephson junction. In this study, we explore the performance of superconducting TaN and Ta thin film combinations on silicon substrates in terms of internal quality factor Qi. We find that standalone TaN films exhibit Qi values of about 1.5x10^5 at 100mK in the single-photon regime. Surprisingly, a resonator made from Ta grown on a few-nanometers-thick TaN seed layer yields largely the same performance. However, adding an additional, few-nanometers-thick Ta buffer layer between the Si substrate and this TaN seed layer enhances Qi significantly up to 5.9x10^5. Supporting transmission electron microscopy measurements reveal nitrogen accumulation and structural disorder at the TaN-Si interface, while this interfacial modification is suppressed when the Ta buffer layer is introduced. The observed improvement in resonator performance is consistent with a reduction of interface-related two-level system losses and strongly supports the hypothesis that controlling the substrate-metal interface is pivotal for the performance of superconducting qubit circuitry.

cond-mat.mtrl-sciCross-listedarXiv:2607.22294•Jul 27, 2026•0 citations

Microwave characterization of tantalum superconducting resonators on silicon substrate with niobium buffer layer

Yoshiro Urade, Kay Yakushiji, Manabu Tsujimoto +4 more

Tantalum thin films sputtered on unheated silicon substrates are characterized with microwaves at around 10 GHz in a 10 mK environment. We show that the phase of tantalum with a body-centered cubic lattice (α-Ta) can be grown selectively by depositing a niobium buffer layer prior to a tantalum film. The physical properties of the films, such as superconducting transition temperature and crystallinity, change markedly with the addition of the buffer layer. Coplanar waveguide resonators based on the composite film exhibit significantly enhanced internal quality factors compared with a film without the buffer layer. The internal quality factor approaches 2 × 107 at a large-photon-number limit. While the quality factor decreases at the single-photon level owing to two-level system (TLS) loss, we have deduced that one of the causes of TLS loss is the amorphous silicon layer at the film–substrate interface, which originates from the substrate cleaning before the film deposition rather than the film itself. The temperature dependence of the internal quality factors shows a marked rise below 200 mK, suggesting the presence of TLS–TLS interactions. The present low-loss tantalum films can be deposited without substrate heating and thus have various potential applications in superconducting quantum electronics.

arXiv:2306.15258•APL Materials•Feb 1, 2024•27 citations
For practical superconducting quantum processors, orders of magnitude improvement in coherence is required, motivating efforts to optimize hardware design and explore new materials. Among the latter, the coherence of superconducting transmon qubits has been shown to improve by forming the qubit capacitor pads from α-tantalum, avoiding the metastable β-phase that forms when depositing tantalum at room temperature, and has been previously identified to be a source of microwave losses. In this work, we show lumped element resonators containing β-phase tantalum in the form of inclusions near the metal–substrate interface with internal quality factors (Qi) up to 5.0 ± 2.5×106 in the single photon regime. They perform at least as good as resonators with no sign of the β-phase in x-ray diffraction and thermal quasi-particle loss. Our results indicate that small concentrations of β-phase can be beneficial, enhancing critical magnetic fields and potentially, for improving coherence in tantalum-based superconducting circuits.
Tantalum-based transmon qubits are a promising platform for building large-scale quantum processors. So far, these qubits have been made from tantalum films grown exclusively in the alpha phase (α-Ta). The beta phase of tantalum (\{beta}-Ta) readily nucleates at room temperature, making it attractive for scalable qubit fabrication. However, \{beta}-Ta is widely believed to be detrimental to qubit performance because it has a lower superconducting critical temperature than α-Ta. We challenge this prevailing belief by fabricating low-loss transmon qubits from \{beta}-Ta films on sapphire. Across 11 qubits, the mean time-averaged quality factor is (5.6 +/- 2.3) x 10^6, with the best qubit recording a time-averaged quality factor of (10.1 +/- 1.3) x 10^6. Resonator studies demonstrate that the dominant microwave loss channel is surface two-level systems, with the surface loss contribution for \{beta}-Ta being about twice that of α-Ta. \{beta}-Ta films exhibit significant kinetic inductance, consistent with an estimated magnetic penetration depth of (1.78 +/- 0.02) μm. This work establishes \{beta}-Ta on sapphire as a material platform for realizing low-loss transmon qubits and other superconducting devices such as compact resonators, kinetic inductance detectors, and quasiparticle traps.
Superconducting coplanar waveguide resonators are essential components in quantum processors, where their internal quality factor (Qi) constrains qubit coherence and readout fidelity. In niobium devices, microwave losses at millikelvin temperatures are strongly influenced by two-level systems (TLS) associated with the complex NbOx surface oxide. To mitigate these losses, we investigate a surface-engineering approach in which Nb films are capped in situ with a thin tantalum layer to suppress Nb2O5 formation and replace the native NbOx interface with a Ta-based oxide. We fabricate Nb/Ta bilayer and reference Nb resonators on high-resistivity silicon using identical DC sputtering and wet etching conditions, and characterize their performance at millikelvin temperatures. Fresh Ta-encapsulated devices exhibit internal quality factors up to 2.4 x 10^6 in the near-single-photon regime, with power dependence consistent with reduced TLS-related loss at the metal-air interface. A control Nb device fabricated under the same process shows comparatively lower Q_TLS, consistent with the beneficial effect of the Ta capping layer. Furthermore, ageing tests performed on Nb/Ta resonators after six months reveal a moderate reduction in Q_TLS relative to their initial values, yet the performance remains superior to newly fabricated Nb-only devices. These results suggest that thin Ta encapsulation enhances interface quality and contributes to improved temporal stability while remaining compatible with Nb-based fabrication workflows.
Abstract The use of α -tantalum in superconducting circuits has enabled a considerable improvement in the coherence time of transmon qubits. The standard approach to grow α -tantalum thin films on silicon involves heating the substrate, which takes several hours per deposition and prevents the integration of this material with wafers containing temperature-sensitive components. We report a detailed experimental study of an alternative growth method of α -tantalum on silicon, which is achieved at room temperature through the use of a niobium seed layer. Despite a substantially higher density of oxygen-rich grain boundaries in the films sputtered at room temperature, resonators made from these films are found to have state-of-the-art quality factors, comparable to resonators fabricated from tantalum grown at high temperature. This finding challenges previous assumptions about correlations between material properties and microwave loss of superconducting thin films, and opens a new avenue for the integration of tantalum into fabrication flows with limited thermal budget.
Alpha-tantalum on silicon is a promising platform for high-coherence superconducting quantum circuits. However, the growth mechanism of alpha-tantalum on silicon remains poorly understood. We present a comprehensive study on alpha-tantalum film growth on various substrates. The decisive role of a substrate material Debye temperature on the phase selection mechanism in tantalum film growth is experimentally confirmed, contradicting the prior assumptions on substrate temperature influence. Crucially, we confirm that alpha-tantalum starts growing only after a 7–10- nm-thick beta-tantalum sublayer. It results in ranging the critical temperature of α-Ta films from 3.77 to 4.39 K for the total thickness from 20 to 150 nm, respectively. Finally, we compared high-quality Al and Ta coplanar resonators on silicon, demonstrating compact tantalum resonators (4/10.5/4 μm) with an internal quality factor exceeding 10 × 106 at single-photon excitation powers.
Tantalum has been demonstrated as a promising material for superconducting qubits. However, comparatively little attention has been given to its nitrides. Tantalum nitride exhibits a range of stoichiometries, resulting in a variety of material properties, including both superconducting and non-superconducting phases. Owing to this versatility, tantalum nitrides can serve multiple purposes in superconducting qubits: as seed layers for alpha-Ta growth, as a superconducting base material and as a non-superconducting barrier in the Josephson junction. In this study, we explore the performance of superconducting TaN and Ta thin film combinations on silicon substrates in terms of internal quality factor Qi. We find that standalone TaN films exhibit Qi values of about 1.5x10^5 at 100mK in the single-photon regime. Surprisingly, a resonator made from Ta grown on a few-nanometers-thick TaN seed layer yields largely the same performance. However, adding an additional, few-nanometers-thick Ta buffer layer between the Si substrate and this TaN seed layer enhances Qi significantly up to 5.9x10^5. Supporting transmission electron microscopy measurements reveal nitrogen accumulation and structural disorder at the TaN-Si interface, while this interfacial modification is suppressed when the Ta buffer layer is introduced. The observed improvement in resonator performance is consistent with a reduction of interface-related two-level system losses and strongly supports the hypothesis that controlling the substrate-metal interface is pivotal for the performance of superconducting qubit circuitry.
Tantalum thin films sputtered on unheated silicon substrates are characterized with microwaves at around 10 GHz in a 10 mK environment. We show that the phase of tantalum with a body-centered cubic lattice (α-Ta) can be grown selectively by depositing a niobium buffer layer prior to a tantalum film. The physical properties of the films, such as superconducting transition temperature and crystallinity, change markedly with the addition of the buffer layer. Coplanar waveguide resonators based on the composite film exhibit significantly enhanced internal quality factors compared with a film without the buffer layer. The internal quality factor approaches 2 × 107 at a large-photon-number limit. While the quality factor decreases at the single-photon level owing to two-level system (TLS) loss, we have deduced that one of the causes of TLS loss is the amorphous silicon layer at the film–substrate interface, which originates from the substrate cleaning before the film deposition rather than the film itself. The temperature dependence of the internal quality factors shows a marked rise below 200 mK, suggesting the presence of TLS–TLS interactions. The present low-loss tantalum films can be deposited without substrate heating and thus have various potential applications in superconducting quantum electronics.