Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.16775 · npj Quantum Information

Robust microwave-optical photon conversion using cavity modes strongly hybridized with a color center ensemble

M. Khalifa, P. S. Kirwin, Jeff F. Young, Joe Salfi

Published Jun 16, 2025• 4 citations
arXivHTMLPDF

Abstract

A microwave-optical converter with high efficiency (>50%) and low added noise ( ≪ 1 photon) could enable the creation of scalable optical quantum networks. However, integrated converters demonstrated to date are too lossy or weakly non-linear to provide this performance. Here we develop a theory of microwave-optical conversion employing an ensemble of spin-bearing color centers strongly coupled to a photonic resonator and/or a superconducting microwave resonator. We find a counterintuitive operating point where microwave and optical photons are tuned to bare center/cavity resonances, which, compared to the weak-coupling limit, has much stronger non-linearity, offering high efficiency with reduced pump- and center-induced losses, and that is robust to inhomogeneous broadening. Taking color center and optical pump-induced losses into account, we predict ~ 95% efficiency and added noise ≪ 1 quanta at low ( μ W) pump powers for both Er- and T-centers in Si. Our results open new pathways to build quantum networks.

DOI
10.1038/s41534-025-01055-4

Related papers

Robust microwave-to-optical single-photon conversion with a Rydberg atom

Wanrang Yu, Thibault Vogt

Abstract We propose an efficient scheme for microwave-to-optical quantum frequency conversion mediated by a single atom simultaneously coupled to a superconducting microwave resonator and an optical cavity. The atom mediates efficient interactions between the two electromagnetic modes via non-linear frequency mixing owing to the presence of huge microwave transition dipole moments between nearby Rydberg states as well as suitable optical transitions between low-lying states. In the regime of four-wave mixing with off-resonant fields, the excited states can be adiabatically eliminated, leading to an effective Hamiltonian that directly describes the two-mode interaction responsible for the frequency conversion. However, in this regime, the converter is slow, hence sensitive to losses due to cavity decays. To enhance the performance of the conversion process, we employ pulse engineering to tailor the atom-field couplings. The resulting protocol exhibits high robustness against decoherence and parameter fluctuations, making it well suited for realistic experimental implementations. Our scheme provides a promising route toward high-fidelity and scalable hybrid quantum interfaces connecting superconducting and optical quantum networks.

Laser Physics Letters•Jul 1, 2026•0 citations

Ultra-Weak-Pump Microwave-to-Optical Quantum Transduction via a Single Color Center

Kyosuke Goto, Hodaka Kurokawa, Hideo Kosaka +1 more

Scaling up superconducting quantum processors remains a central challenge for realizing fault-tolerant quantum computation. Although distributed architectures based on optical photons offer a promising route to scalability, they require an efficient microwave-to-optical quantum transducer that operates at cryogenic temperatures. Existing approaches typically rely on strong optical pumping, which induces undesirable heating and degrades single-photon coherence. Here, we propose a microwave-to-optical quantum transducer based on resonant scattering at a single color center embedded in a diamond optomechanical resonator. We show that strong coupling between the color center and the optical cavity enables coherent conversion at extremely weak pump powers on the order of 10 pW. The proposed scheme enables remote entanglement generation at a kilohertz-scale rate with a fidelity exceeding 0.9, demonstrating a viable pathway toward ultra-weak-pump and high-efficiency quantum transducers based on a solid-state defect.

quant-pharXiv:2605.15988•May 18, 2026•0 citations

Efficient quantum microwave-to-optical conversion using electro-optic nanophotonic coupled resonators

Mohammad Soltani, Mian Zhang, Colm A. Ryan +3 more

We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate ($g/2\ensuremath{\pi}$) in the range of $\ensuremath{\sim}5$--15 kHz. Owing to a large $g$ factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical $\mathit{Q}$ ($\ensuremath{\sim}{10}^{6}$) and microwave $Q$ ($\ensuremath{\sim}{10}^{4}$). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.

arXiv:1711.00346•Physical Review A•Oct 5, 2017•80 citations

Pump-Free Microwave-Optical Bell Pair Generation for Teleportation-Based Quantum Transduction

Fangxin Li, Jaesung Heo, Zhaoyou Wang +9 more

The coherent conversion between microwave and optical photons, known as quantum transduction, is critical for connecting superconducting processors to optical networks. Existing methods are limited by complications associated with optical pumping. We propose a pump-free microwave-optical Bell-pair source for teleportation-based transduction. Using a spin or atomic system resonantly coupled to optical and microwave cavities, the scheme generates loss-robust heralded Bell pairs. Across color centers, atomic ensembles, and phonon-mediated systems, this assembly achieves kilohertz-range heralding rates with high fidelity.

quant-pharXiv:2609.16364•Sep 16, 2026•0 citations

On-chip microwave-to-optical quantum coherent converter based on a superconducting resonator coupled to an electro-optic microresonator

Clément Javerzac‐Galy, Kirill Plekhanov, Nathan Bernier +3 more

We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths ${g}_{0}$ as large as $\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)$ kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as $O(1)$ mW.

arXiv:1512.06442•Physical Review A•Nov 9, 2016•105 citations

Hybrid Device Design for a Pump-Free Microwave-Optical Bell-Pair Source

Jaesung Heo, Fangxin Li, Zhaoyou Wang +3 more

Hybrid quantum devices offer a route to combine complementary functionalities of disparate physical systems within a single architecture. Extending this concept to a three-way interface among optical, microwave, and single-spin degrees of freedom is particularly challenging because of the weak magnetic interaction between an individual spin and a microwave photon. Here, we propose a hybrid device architecture that integrates a single diamond color center with a superconducting parallel-plate microwave resonator and a photonic-crystal cavity. The parallel-plate geometry drastically reduces the resonator impedance and enhances the single-spin microwave coupling rate by an order of magnitude. The enhanced interaction allows the optical cavity to be spatially separated from the superconducting structure while retaining appreciable microwave coupling and optical cooperativity above 1. For both NV$^-$ and ${}^{117}$SnV$^-$ centers, numerical simulations predict microwave coupling rates in the kilohertz range together with optical cooperativity exceeding 1. This architecture provides a promising route toward single-spin microwave-optical hybrid quantum devices enabling functionalities such as pump-free microwave-optical Bell-pair generation.

quant-pharXiv:2512.05096•Dec 5, 2025•1 citation
A microwave-optical converter with high efficiency (>50%) and low added noise ( ≪ 1 photon) could enable the creation of scalable optical quantum networks. However, integrated converters demonstrated to date are too lossy or weakly non-linear to provide this performance. Here we develop a theory of microwave-optical conversion employing an ensemble of spin-bearing color centers strongly coupled to a photonic resonator and/or a superconducting microwave resonator. We find a counterintuitive operating point where microwave and optical photons are tuned to bare center/cavity resonances, which, compared to the weak-coupling limit, has much stronger non-linearity, offering high efficiency with reduced pump- and center-induced losses, and that is robust to inhomogeneous broadening. Taking color center and optical pump-induced losses into account, we predict ~ 95% efficiency and added noise ≪ 1 quanta at low ( μ W) pump powers for both Er- and T-centers in Si. Our results open new pathways to build quantum networks.
Abstract We propose an efficient scheme for microwave-to-optical quantum frequency conversion mediated by a single atom simultaneously coupled to a superconducting microwave resonator and an optical cavity. The atom mediates efficient interactions between the two electromagnetic modes via non-linear frequency mixing owing to the presence of huge microwave transition dipole moments between nearby Rydberg states as well as suitable optical transitions between low-lying states. In the regime of four-wave mixing with off-resonant fields, the excited states can be adiabatically eliminated, leading to an effective Hamiltonian that directly describes the two-mode interaction responsible for the frequency conversion. However, in this regime, the converter is slow, hence sensitive to losses due to cavity decays. To enhance the performance of the conversion process, we employ pulse engineering to tailor the atom-field couplings. The resulting protocol exhibits high robustness against decoherence and parameter fluctuations, making it well suited for realistic experimental implementations. Our scheme provides a promising route toward high-fidelity and scalable hybrid quantum interfaces connecting superconducting and optical quantum networks.
Scaling up superconducting quantum processors remains a central challenge for realizing fault-tolerant quantum computation. Although distributed architectures based on optical photons offer a promising route to scalability, they require an efficient microwave-to-optical quantum transducer that operates at cryogenic temperatures. Existing approaches typically rely on strong optical pumping, which induces undesirable heating and degrades single-photon coherence. Here, we propose a microwave-to-optical quantum transducer based on resonant scattering at a single color center embedded in a diamond optomechanical resonator. We show that strong coupling between the color center and the optical cavity enables coherent conversion at extremely weak pump powers on the order of 10 pW. The proposed scheme enables remote entanglement generation at a kilohertz-scale rate with a fidelity exceeding 0.9, demonstrating a viable pathway toward ultra-weak-pump and high-efficiency quantum transducers based on a solid-state defect.
We propose a low-noise, triply resonant, electro-optic (EO) scheme for quantum microwave-to-optical conversion based on coupled nanophotonics resonators integrated with a superconducting qubit. Our optical system features a split resonance---a doublet---with a tunable frequency splitting that matches the microwave resonance frequency of the superconducting qubit. This is in contrast to conventional approaches, where large optical resonators with free-spectral range comparable to the qubit microwave frequency are used. In our system, EO mixing between the optical pump coupled into the low-frequency doublet mode and a resonance microwave photon results in an up-converted optical photon on resonance with high-frequency doublet mode. Importantly, the down-conversion process, which is the source of noise, is suppressed in our scheme as the coupled-resonator system does not support modes at that frequency. Our device has at least an order of magnitude smaller footprint than conventional devices, resulting in large overlap between optical and microwave fields and a large photon conversion rate ($g/2\ensuremath{\pi}$) in the range of $\ensuremath{\sim}5$--15 kHz. Owing to a large ggg factor and doubly resonant nature of our device, microwave-to-optical frequency conversion can be achieved with optical pump powers in the range of tens of microwatts, even with moderate values for optical Q\mathit{Q}Q ($\ensuremath{\sim}{10}^{6}$) and microwave QQQ ($\ensuremath{\sim}{10}^{4}$). The performance metrics of our device, with substantial improvement over the previous EO-based approaches, promise a scalable quantum microwave-to-optical conversion and networking of superconducting processors via optical fiber communication.
The coherent conversion between microwave and optical photons, known as quantum transduction, is critical for connecting superconducting processors to optical networks. Existing methods are limited by complications associated with optical pumping. We propose a pump-free microwave-optical Bell-pair source for teleportation-based transduction. Using a spin or atomic system resonantly coupled to optical and microwave cavities, the scheme generates loss-robust heralded Bell pairs. Across color centers, atomic ensembles, and phonon-mediated systems, this assembly achieves kilohertz-range heralding rates with high fidelity.
We propose a device architecture capable of direct quantum coherent electro-optical conversion of microwave-to-optical photons. The hybrid system consists of a planar superconducting microwave circuit coupled to an integrated whispering-gallery-mode microresonator made from an electro-optical material. We show that by exploiting the large vacuum electric field of the planar microwave resonator, electro-optical (vacuum) coupling strengths g0{g}_{0}g0​ as large as $\ensuremath{\sim}2\ensuremath{\pi}O(10\ensuremath{-}100)$ kHz are achievable with currently available technology---a more than 3 orders of magnitude improvement over prior designs and realizations. Operating at millikelvin temperatures, such a converter would enable high-efficiency conversion of microwave-to-optical photons. We analyze the added noise and show that maximum quantum coherent conversion efficiency is achieved for a multiphoton cooperativity of unity which can be reached with optical power as low as O(1)O(1)O(1) mW.
Hybrid quantum devices offer a route to combine complementary functionalities of disparate physical systems within a single architecture. Extending this concept to a three-way interface among optical, microwave, and single-spin degrees of freedom is particularly challenging because of the weak magnetic interaction between an individual spin and a microwave photon. Here, we propose a hybrid device architecture that integrates a single diamond color center with a superconducting parallel-plate microwave resonator and a photonic-crystal cavity. The parallel-plate geometry drastically reduces the resonator impedance and enhances the single-spin microwave coupling rate by an order of magnitude. The enhanced interaction allows the optical cavity to be spatially separated from the superconducting structure while retaining appreciable microwave coupling and optical cooperativity above 1. For both NV−^-− and 117{}^{117}117SnV−^-− centers, numerical simulations predict microwave coupling rates in the kilohertz range together with optical cooperativity exceeding 1. This architecture provides a promising route toward single-spin microwave-optical hybrid quantum devices enabling functionalities such as pump-free microwave-optical Bell-pair generation.