Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2501.13050 · Physical Review Letters

Efficient Simulation of Parametrized Quantum Circuits under Nonunital Noise through Pauli Backpropagation

Victor Martinez, Armando Angrisani, Ekaterina Pankovets, Omar Fawzi, Daniel Stilck França

Published May 28, 2025• 19 citations
arXivHTMLPDF

Abstract

As quantum devices continue to grow in size but remain affected by noise, it is crucial to determine when and how they can outperform classical computers on practical tasks. A central piece in this effort is to develop the most efficient classical simulation algorithms possible. Among the most promising approaches are Pauli backpropagation algorithms, which have already demonstrated their ability to efficiently simulate certain classes of parameterized quantum circuits-a leading contender for near-term quantum advantage-under random circuit assumptions and depolarizing noise. However, their efficiency was not previously established for more realistic nonunital noise models, such as amplitude damping, that better capture noise on existing hardware. Here, we close this gap by adapting Pauli backpropagation to nonunital noise, proving that it remains efficient even under these more challenging conditions. Our proof leverages a refined combinatorial analysis to handle the complexities introduced by nonunital channels, thus strengthening Pauli backpropagation as a powerful tool for simulating near-term quantum devices.

DOI
10.1103/j1gg-s6zb

Related papers

Simulating Quantum Circuits with Arbitrary Local Noise Using Pauli Propagation

Armando Angrisani, Antonio Anna Mele, Manuel S. Rudolph +2 more

We present a polynomial-time classical algorithm for estimating expectation values of arbitrary observables on typical quantum circuits under any incoherent local noise, including non-unital or dephasing. Although previous research demonstrated that some carefully designed quantum circuits affected by non-unital noise cannot be efficiently simulated, we show that this does not apply to average-case circuits, as these can be efficiently simulated using Pauli-path methods. Specifically, we prove that, with high probability over the circuit gates’ choice, Pauli propagation algorithms with tailored truncation strategies achieve an inversely polynomially small simulation error. This result holds for arbitrary circuit topologies and for any local noise, under the assumption that the distribution of each circuit layer is invariant under single-qubit random gates. Under the same minimal assumptions, we also prove that most noisy circuits can be truncated to an effective logarithmic depth for the task of estimating expectation values of observables, thus generalizing prior results to a significantly broader class of circuit ensembles. We further numerically validate our algorithm with simulations on a 6 × 6 lattice of qubits under the effects of amplitude damping and dephasing noise, as well as real-time dynamics on an 11 × 11 lattice of qubits affected by amplitude damping.

arXiv:2501.13101•PRX Quantum•Mar 17, 2026•70 citations

Pauli path simulations of noisy quantum circuits beyond average case

Guillermo González-García, J. I. Cirac, Rahul Trivedi

For random quantum circuits on n qubits of depth Θ ( log ⁡ n ) with depolarizing noise, the task of sampling from the output state can be efficiently performed classically using a Pauli path method \cite{Aharonov2023_paulipaths} . This paper aims to study the performance of this method beyond random circuits. We first consider the classical simulation of local observables in circuits composed of Clifford and T gates – going beyond the average case analysis, we derive sufficient conditions for simulatability in terms of the noise rate and the fraction of gates that are T gates, and show that if noise is introduced at a faster rate than T gates, the simulation becomes classically easy. As an application of this result, we study 2D QAOA circuits that attempt to find low-energy states of classical Ising models on general graphs. There, our results shows that for hard instances of the problem, which correspond to Ising model's graph being geometrically non-local, a QAOA algorithm mapped to a geometrically local circuit architecture using SWAP gates does not have any asymptotic advantage over classical algorithms if depolarized at a constant rate. Finally, we illustrate instances where the Pauli path method fails to give the correct result, and also initiate a study of the trade-off between fragility to noise and classical complexity of simulating a given quantum circuit.

arXiv:2407.16068•Quantum•May 5, 2025•35 citations

Can Chaotic Quantum Circuits Maintain Quantum Supremacy under Noise?

Man‐Hong Yung, Xun Gao

Although the emergence of a fully-functional quantum computer may still be far away from today, in the near future, it is possible to have medium-size, special-purpose, quantum devices that can perform computational tasks not efficiently simulable with any classical computer. This status is known as quantum supremacy (or quantum advantage), where one of the promising approaches is through the sampling of chaotic quantum circuits. Sampling of ideal chaotic quantum circuits has been argued to require an exponential time for classical devices. A major question is whether quantum supremacy can be maintained under noise without error correction, as the implementation of fault-tolerance would cost lots of extra qubits and quantum gates. Here we show that, for a family of chaotic quantum circuits subject to Pauli errors, there exists an non-exponential classical algorithm capable of simulating the noisy chaotic quantum circuits with bounded errors. This result represents a serious challenge to a previous result in the literature suggesting the failure of classical devices in simulating noisy chaotic circuits with about 48 qubits and depth 25. Moreover, even though our model does not cover all types of experimental errors, from a practical point view, our result describes a well-defined setting where quantum supremacy can be tested against the challenges of classical rivals, in the context of chaotic quantum circuits.

arXiv:1706.08913•Jun 27, 2017•20 citations

A polynomial-time classical sampler for noisy quantum circuits from statistical mechanics

Jon Nelson, Joel Rajakumar, Chao Yin +2 more

Developing classical simulation algorithms for noisy quantum circuits is essential to delineating the limits of quantum advantage. Existing classical sampling approaches for general circuits require circuit depths to grow logarithmically with system size, so that noise drives the global output state close to a trivial state. Here we show that local accumulation of noise at a depth independent of system size is already sufficient. Specifically, we prove that any geometrically local circuit composed of unital operations and interspersed with single-qubit depolarizing noise of strength $p$ after $Θ(p^{-1} \log p^{-1})$ depth can be approximately sampled from a polynomial-time classical computer. This generalizes existing results that impose anticoncentration assumptions or non-universal gate sets in order to obtain a classical sampler at such shallow depths. Our proof maps the output state of the circuit to a polymer model in statistical mechanics, and combines a convergent cluster expansion with hypercontractivity of the depolarizing channel.

quant-pharXiv:2610.00548•Oct 2, 2026•1 citation

Classical simulations of noisy variational quantum circuits

Enrico Fontana, Manuel S. Rudolph, Ross Duncan +2 more

Noise detrimentally affects quantum computations so that they not only become less accurate but also easier to simulate classically as systems scale up. We construct a classical simulation algorithm, lowesa (low weight efficient simulation algorithm), for estimating expectation values of noisy parameterised quantum circuits with a fixed observable. It combines previous results on spectral analysis of parameterised circuits with Pauli back-propagation and recent ideas for simulations of noisy random circuits. We show, under some conditions on the circuits and mild assumptions on noise, that lowesa gives an efficient, polynomial algorithm in the number of qubits (and depth), with approximation error that vanishes exponentially in the physical error rate and a controllable cutoff parameter. This is valid for any expectation value that may be efficiently evaluated on a quantum computer. We discuss the practical limitations of the method for circuit classes with correlated parameters and its scaling with decreasing error rates.

arXiv:2306.05400•npj Quantum Information•May 22, 2025•93 citations

Enhancing classical simulation with noisy quantum devices

Ruiqi Zhang, Fuchuan Wei, Zhaohui Wei

As quantum devices continue to improve in scale and precision, a central challenge is how to effectively utilize noisy hardware for meaningful computation. Most existing approaches aim to recover noiseless circuit outputs from noisy ones through error mitigation or correction. Here, we show that noisy quantum devices can be directly leveraged as computational resources to enhance the classical simulation of quantum circuits. We introduce the Noisy-device-enhanced Classical Simulation (NDE-CS) protocol, which improves stabilizer-based classical Monte Carlo simulation methods by incorporating data obtained from noisy quantum hardware. Specifically, NDE-CS uses noisy executions of a target circuit together with noisy Clifford circuits to learn how the target circuit can be expressed in terms of Clifford circuits under realistic noise. The same learned relation can then be reused in the noiseless Clifford limit, enabling accurate estimation of ideal expectation values with substantially reduced sampling cost. Numerical simulations on Trotterized Ising circuits demonstrate that NDE-CS achieves orders-of-magnitude reductions in sampling cost compared to the underlying purely classical Monte Carlo approaches from which it is derived, while maintaining the same accuracy. We also compare NDE-CS with Sparse Pauli Dynamics (SPD), a powerful classical framework capable of simulating quantum circuits at previously inaccessible scales, and provide an example where the cost of SPD scales exponentially with system size, while NDE-CS scales much more favorably. These results establish NDE-CS as a scalable hybrid simulation approach for quantum circuits, where noise can be harnessed as a computational asset.

quant-pharXiv:2601.08772•npj Quantum Information•Jan 14, 2026•2 citations
As quantum devices continue to grow in size but remain affected by noise, it is crucial to determine when and how they can outperform classical computers on practical tasks. A central piece in this effort is to develop the most efficient classical simulation algorithms possible. Among the most promising approaches are Pauli backpropagation algorithms, which have already demonstrated their ability to efficiently simulate certain classes of parameterized quantum circuits-a leading contender for near-term quantum advantage-under random circuit assumptions and depolarizing noise. However, their efficiency was not previously established for more realistic nonunital noise models, such as amplitude damping, that better capture noise on existing hardware. Here, we close this gap by adapting Pauli backpropagation to nonunital noise, proving that it remains efficient even under these more challenging conditions. Our proof leverages a refined combinatorial analysis to handle the complexities introduced by nonunital channels, thus strengthening Pauli backpropagation as a powerful tool for simulating near-term quantum devices.
We present a polynomial-time classical algorithm for estimating expectation values of arbitrary observables on typical quantum circuits under any incoherent local noise, including non-unital or dephasing. Although previous research demonstrated that some carefully designed quantum circuits affected by non-unital noise cannot be efficiently simulated, we show that this does not apply to average-case circuits, as these can be efficiently simulated using Pauli-path methods. Specifically, we prove that, with high probability over the circuit gates’ choice, Pauli propagation algorithms with tailored truncation strategies achieve an inversely polynomially small simulation error. This result holds for arbitrary circuit topologies and for any local noise, under the assumption that the distribution of each circuit layer is invariant under single-qubit random gates. Under the same minimal assumptions, we also prove that most noisy circuits can be truncated to an effective logarithmic depth for the task of estimating expectation values of observables, thus generalizing prior results to a significantly broader class of circuit ensembles. We further numerically validate our algorithm with simulations on a 6 × 6 lattice of qubits under the effects of amplitude damping and dephasing noise, as well as real-time dynamics on an 11 × 11 lattice of qubits affected by amplitude damping.
For random quantum circuits on n qubits of depth Θ ( log ⁡ n ) with depolarizing noise, the task of sampling from the output state can be efficiently performed classically using a Pauli path method \cite{Aharonov2023_paulipaths} . This paper aims to study the performance of this method beyond random circuits. We first consider the classical simulation of local observables in circuits composed of Clifford and T gates – going beyond the average case analysis, we derive sufficient conditions for simulatability in terms of the noise rate and the fraction of gates that are T gates, and show that if noise is introduced at a faster rate than T gates, the simulation becomes classically easy. As an application of this result, we study 2D QAOA circuits that attempt to find low-energy states of classical Ising models on general graphs. There, our results shows that for hard instances of the problem, which correspond to Ising model's graph being geometrically non-local, a QAOA algorithm mapped to a geometrically local circuit architecture using SWAP gates does not have any asymptotic advantage over classical algorithms if depolarized at a constant rate. Finally, we illustrate instances where the Pauli path method fails to give the correct result, and also initiate a study of the trade-off between fragility to noise and classical complexity of simulating a given quantum circuit.
Although the emergence of a fully-functional quantum computer may still be far away from today, in the near future, it is possible to have medium-size, special-purpose, quantum devices that can perform computational tasks not efficiently simulable with any classical computer. This status is known as quantum supremacy (or quantum advantage), where one of the promising approaches is through the sampling of chaotic quantum circuits. Sampling of ideal chaotic quantum circuits has been argued to require an exponential time for classical devices. A major question is whether quantum supremacy can be maintained under noise without error correction, as the implementation of fault-tolerance would cost lots of extra qubits and quantum gates. Here we show that, for a family of chaotic quantum circuits subject to Pauli errors, there exists an non-exponential classical algorithm capable of simulating the noisy chaotic quantum circuits with bounded errors. This result represents a serious challenge to a previous result in the literature suggesting the failure of classical devices in simulating noisy chaotic circuits with about 48 qubits and depth 25. Moreover, even though our model does not cover all types of experimental errors, from a practical point view, our result describes a well-defined setting where quantum supremacy can be tested against the challenges of classical rivals, in the context of chaotic quantum circuits.
Developing classical simulation algorithms for noisy quantum circuits is essential to delineating the limits of quantum advantage. Existing classical sampling approaches for general circuits require circuit depths to grow logarithmically with system size, so that noise drives the global output state close to a trivial state. Here we show that local accumulation of noise at a depth independent of system size is already sufficient. Specifically, we prove that any geometrically local circuit composed of unital operations and interspersed with single-qubit depolarizing noise of strength ppp after Θ(p−1log⁡p−1)Θ(p^{-1} \log p^{-1})Θ(p−1logp−1) depth can be approximately sampled from a polynomial-time classical computer. This generalizes existing results that impose anticoncentration assumptions or non-universal gate sets in order to obtain a classical sampler at such shallow depths. Our proof maps the output state of the circuit to a polymer model in statistical mechanics, and combines a convergent cluster expansion with hypercontractivity of the depolarizing channel.
Noise detrimentally affects quantum computations so that they not only become less accurate but also easier to simulate classically as systems scale up. We construct a classical simulation algorithm, lowesa (low weight efficient simulation algorithm), for estimating expectation values of noisy parameterised quantum circuits with a fixed observable. It combines previous results on spectral analysis of parameterised circuits with Pauli back-propagation and recent ideas for simulations of noisy random circuits. We show, under some conditions on the circuits and mild assumptions on noise, that lowesa gives an efficient, polynomial algorithm in the number of qubits (and depth), with approximation error that vanishes exponentially in the physical error rate and a controllable cutoff parameter. This is valid for any expectation value that may be efficiently evaluated on a quantum computer. We discuss the practical limitations of the method for circuit classes with correlated parameters and its scaling with decreasing error rates.
As quantum devices continue to improve in scale and precision, a central challenge is how to effectively utilize noisy hardware for meaningful computation. Most existing approaches aim to recover noiseless circuit outputs from noisy ones through error mitigation or correction. Here, we show that noisy quantum devices can be directly leveraged as computational resources to enhance the classical simulation of quantum circuits. We introduce the Noisy-device-enhanced Classical Simulation (NDE-CS) protocol, which improves stabilizer-based classical Monte Carlo simulation methods by incorporating data obtained from noisy quantum hardware. Specifically, NDE-CS uses noisy executions of a target circuit together with noisy Clifford circuits to learn how the target circuit can be expressed in terms of Clifford circuits under realistic noise. The same learned relation can then be reused in the noiseless Clifford limit, enabling accurate estimation of ideal expectation values with substantially reduced sampling cost. Numerical simulations on Trotterized Ising circuits demonstrate that NDE-CS achieves orders-of-magnitude reductions in sampling cost compared to the underlying purely classical Monte Carlo approaches from which it is derived, while maintaining the same accuracy. We also compare NDE-CS with Sparse Pauli Dynamics (SPD), a powerful classical framework capable of simulating quantum circuits at previously inaccessible scales, and provide an example where the cost of SPD scales exponentially with system size, while NDE-CS scales much more favorably. These results establish NDE-CS as a scalable hybrid simulation approach for quantum circuits, where noise can be harnessed as a computational asset.