Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2501.03158 · Review of Scientific Instruments

Phase-contrast imaging of a dense atomic cloud

Marcia Frómeta Fernández, Pablo Gabriel Santos Dias, P. H. N. Magnani, M. do Amaral Martins, Mathilde Hugbart, A. Cipris, Ph. W. Courteille, R Teixeira

Published Aug 1, 2025• 3 citations
arXivHTMLPDF

Abstract

We demonstrate that phase-contrast imaging (PCI) can reliably reconstruct the in situ density profile even for highly spatially and optically dense samples. In our experiment, we achieve high spatial densities of up to 7.9 × 1013 atoms/cm3 and optical depths up to 64 in a dense cold atomic cloud of 88Sr atoms. The use of a spatial light modulator instead of a fixed phase plate in the PCI setup provides enhanced flexibility and control of imaging parameters, making this imaging technique robust against imaging artifacts and adaptable to varying experimental conditions. Moreover, we quantify the conditions under which the standard single-atom polarizability model remains accurate for PCI in a density regime where collective effects should modify the atomic response of the system. We experimentally validate our statements by showing excellent agreement with time-of-flight measurements even at the highest densities. Our results establish PCI as a reliable and versatile method for characterizing spatially dense atomic clouds.

DOI
10.1063/5.0256884

Related papers

Strong saturation absorption imaging of dense clouds of ultracold atoms

Gael Reinaudi, Thierry Lahaye, Z. Wang +1 more

We report on a far above saturation absorption imaging technique to investigate the characteristics of dense packets of ultracold atoms. The transparency of the cloud is controlled by the incident light intensity as a result of the nonlinear response of the atoms to the probe beam. We detail our experimental procedure to calibrate the imaging system for reliable quantitative measurements and demonstrate the use of this technique to extract the profile and its spatial extent of an optically thick atomic cloud.

arXiv:0707.2930•Optics Letters•Oct 23, 2007•246 citations

Coherent light-matter interaction in dense atomic clouds

Marcia Frómeta Fernández

The main objective of this research is to study a particular case of light-matter interaction: the scattering of light in dense atomic samples.The regime of high atomic densities is represented by samples where the distance between neighboring atoms is on the order of the wavelength associated with the atomic transition.In this regime, short-range atomic interactions cannot be neglected, and in these systems, we expect to observe significant modifications in collective effects such as subradiance or superradiance.Overall, the propagation of light through this type of system is not well-known to the scientific community, and the existing models work to describe very specific situations.To pave the way for achieving our overall goal, this work proposes an experimental setup to obtain a dense cloud of 88 Sr, which is the chemical species we work with in our laboratory.For this purpose, atoms previously trapped using a Magneto-Optical Trap are transferred to a Crossed Optical Dipole Trap.During the optimization and characterization of the optical trap, problems were encountered in producing an image with quantitative information of the atomic ensemble and in transferring a large number of atoms in a very small trapping volume.These problems were resolved with the implementation of a Phase Contrast Imaging system and the implementation of an Optical Molasses as an additional cooling step.Under these conditions, we obtained a cloud that can be suitable for conducting studies on collective effects, transitioning from the dilute to the dense regime.The initial experiments, once our atomic ensemble was prepared, involve measuring the coherent transmission of a low-intensity beam through the cloud.For this purpose, incident light near the resonance of a dipolar transition of the type J = 0 ↔ J = 1 of 88 Sr is used, interacting with a homogeneous region of the sample.Simulations of this type of process can be performed using the Coupled Dipole Model, which describes the overall response of light scattering by the sample considering dipole-dipole interactions mediated by light.With this work, we aim to advance the understanding of density effects by comparing the coherent optical response of the dense cloud with the theory based on the Coupled Dipole Model.

•Dec 14, 2023•0 citations

Thermodynamics of Bose-Einstein-condensed clouds using phase-contrast imaging

R. Meppelink, R. Rozendaal, S. B. Koller +2 more

Phase contrast imaging is used to observe Bose-Einstein condensates at finite temperature in situ. The imaging technique is used to accurately derive the absolute phase shift of a probe laser beam due to both the condensate and the thermal cloud. The accuracy of the method is enhanced by using the periodicity of the intensity signal as a function of the accumulated phase. The measured density profiles can be described using a two-relevant-parameter fit, in which only the chemical potential and the temperature are to be determined. This allows us to directly compare the measured density profiles to different mean-field models in which the interaction between the condensed and the thermal atoms is taken into account to various degrees.

Physical Review A•May 27, 2010•72 citations

Phase contrast imaging of Bose condensed clouds

R. Meppelink, R. Rozendaal, Koller, S. B. +2 more

Phase contrast imaging is used to observe Bose-Einstein condensates (BECs) at finite temperature in situ. The imaging technique is used to accurately derive the absolute phase shift of a probe laser beam due to both the condensate and the thermal cloud. The accuracy of the method is enhanced by using the periodicity of the intensity signal as a function of the accumulated phase. The measured density profiles can be described using a two relevant parameter fit, in which only the chemical potential and the temperature are to be determined. This allows us to directly compare the measured density profiles to different mean-field models in which the interaction between the condensed and thermal atoms is taken into account to various degrees.

arXiv:0909.4429•Sep 24, 2009•3 citations

Spatial calibration of high-density absorption imaging

Toke Vibel, M B Christensen, M A Kristensen +4 more

Abstract The accurate determination of atom numbers is an ubiquitous problem in the field of ultracold atoms. For modest atom numbers, absolute calibration techniques are available, however, for large numbers and high densities, the available techniques neglect many-body scattering processes. Here, a spatial calibration technique for time-of-flight absorption images of ultracold atomic clouds is presented. The calibration is obtained from radially averaged absorption images and we provide a practical guide to the calibration process. It is shown that the calibration coefficient scales linearly with optical density and depends on the absorbed photon number for the experimental conditions explored here. This allows for the direct inclusion of a spatially dependent calibration in the image analysis. For typical ultracold atom clouds the spatial calibration technique leads to corrections in the detected atom number up to ≈ 12 % and temperature up to ≈ 14 % in comparison to previous calibration techniques. The technique presented here addresses a major difficulty in absorption imaging of ultracold atomic clouds and prompts further theoretical work to understand the scattering processes in ultracold dense clouds of atoms for accurate atom number calibration.

arXiv:2402.06514•Journal of Physics B Atomic Molecular and Optical Physics•Jun 3, 2024•7 citations

Information and backaction due to phase-contrast-imaging measurements of cold atomic gases: Beyond Gaussian states

Ebubechukwu O. Ilo-Okeke, Tim Byrnes

We further examine a theory of phase contrast imaging (PCI) of cold atomic gases, first introduced by us in Phys. Rev. Lett. 112, 233602 (2014). We model the PCI measurement by directly calculating the entangled state between the light and the atoms due to the ac Stark shift, which induces a conditional phase shift on the light depending upon the atomic state. By interfering the light that passes through the BEC with the original light, one can obtain information of the atomic state at a single-shot level. We derive an exact expression for a measurement operator that embodies the information obtained from PCI, as well as the backaction on the atomic state. By the use of exact expressions for the measurement process, we go beyond the continuous variables approximation such that the non-Gaussian regime can be accessed for both the measured state and the postmeasurement state. Features such as the photon probability density, signal, signal variance, Fisher information, error of the measurement, and the backaction are calculated by applying the measurement operator to an atomic two-spin-state system. For an atomic state that is initially in a spin-coherent state, we obtain analytical expression for these quantities. There is an optimal atom-light interaction time that scales inversely proportional to the number of atoms, which maximizes the information readout.

arXiv:1606.08466•Physical Review A•Jul 25, 2016•15 citations
We demonstrate that phase-contrast imaging (PCI) can reliably reconstruct the in situ density profile even for highly spatially and optically dense samples. In our experiment, we achieve high spatial densities of up to 7.9 × 1013 atoms/cm3 and optical depths up to 64 in a dense cold atomic cloud of 88Sr atoms. The use of a spatial light modulator instead of a fixed phase plate in the PCI setup provides enhanced flexibility and control of imaging parameters, making this imaging technique robust against imaging artifacts and adaptable to varying experimental conditions. Moreover, we quantify the conditions under which the standard single-atom polarizability model remains accurate for PCI in a density regime where collective effects should modify the atomic response of the system. We experimentally validate our statements by showing excellent agreement with time-of-flight measurements even at the highest densities. Our results establish PCI as a reliable and versatile method for characterizing spatially dense atomic clouds.
We report on a far above saturation absorption imaging technique to investigate the characteristics of dense packets of ultracold atoms. The transparency of the cloud is controlled by the incident light intensity as a result of the nonlinear response of the atoms to the probe beam. We detail our experimental procedure to calibrate the imaging system for reliable quantitative measurements and demonstrate the use of this technique to extract the profile and its spatial extent of an optically thick atomic cloud.
The main objective of this research is to study a particular case of light-matter interaction: the scattering of light in dense atomic samples.The regime of high atomic densities is represented by samples where the distance between neighboring atoms is on the order of the wavelength associated with the atomic transition.In this regime, short-range atomic interactions cannot be neglected, and in these systems, we expect to observe significant modifications in collective effects such as subradiance or superradiance.Overall, the propagation of light through this type of system is not well-known to the scientific community, and the existing models work to describe very specific situations.To pave the way for achieving our overall goal, this work proposes an experimental setup to obtain a dense cloud of 88 Sr, which is the chemical species we work with in our laboratory.For this purpose, atoms previously trapped using a Magneto-Optical Trap are transferred to a Crossed Optical Dipole Trap.During the optimization and characterization of the optical trap, problems were encountered in producing an image with quantitative information of the atomic ensemble and in transferring a large number of atoms in a very small trapping volume.These problems were resolved with the implementation of a Phase Contrast Imaging system and the implementation of an Optical Molasses as an additional cooling step.Under these conditions, we obtained a cloud that can be suitable for conducting studies on collective effects, transitioning from the dilute to the dense regime.The initial experiments, once our atomic ensemble was prepared, involve measuring the coherent transmission of a low-intensity beam through the cloud.For this purpose, incident light near the resonance of a dipolar transition of the type J = 0 ↔ J = 1 of 88 Sr is used, interacting with a homogeneous region of the sample.Simulations of this type of process can be performed using the Coupled Dipole Model, which describes the overall response of light scattering by the sample considering dipole-dipole interactions mediated by light.With this work, we aim to advance the understanding of density effects by comparing the coherent optical response of the dense cloud with the theory based on the Coupled Dipole Model.
Phase contrast imaging is used to observe Bose-Einstein condensates at finite temperature in situ. The imaging technique is used to accurately derive the absolute phase shift of a probe laser beam due to both the condensate and the thermal cloud. The accuracy of the method is enhanced by using the periodicity of the intensity signal as a function of the accumulated phase. The measured density profiles can be described using a two-relevant-parameter fit, in which only the chemical potential and the temperature are to be determined. This allows us to directly compare the measured density profiles to different mean-field models in which the interaction between the condensed and the thermal atoms is taken into account to various degrees.
Phase contrast imaging is used to observe Bose-Einstein condensates (BECs) at finite temperature in situ. The imaging technique is used to accurately derive the absolute phase shift of a probe laser beam due to both the condensate and the thermal cloud. The accuracy of the method is enhanced by using the periodicity of the intensity signal as a function of the accumulated phase. The measured density profiles can be described using a two relevant parameter fit, in which only the chemical potential and the temperature are to be determined. This allows us to directly compare the measured density profiles to different mean-field models in which the interaction between the condensed and thermal atoms is taken into account to various degrees.
Abstract The accurate determination of atom numbers is an ubiquitous problem in the field of ultracold atoms. For modest atom numbers, absolute calibration techniques are available, however, for large numbers and high densities, the available techniques neglect many-body scattering processes. Here, a spatial calibration technique for time-of-flight absorption images of ultracold atomic clouds is presented. The calibration is obtained from radially averaged absorption images and we provide a practical guide to the calibration process. It is shown that the calibration coefficient scales linearly with optical density and depends on the absorbed photon number for the experimental conditions explored here. This allows for the direct inclusion of a spatially dependent calibration in the image analysis. For typical ultracold atom clouds the spatial calibration technique leads to corrections in the detected atom number up to ≈ 12 % and temperature up to ≈ 14 % in comparison to previous calibration techniques. The technique presented here addresses a major difficulty in absorption imaging of ultracold atomic clouds and prompts further theoretical work to understand the scattering processes in ultracold dense clouds of atoms for accurate atom number calibration.
We further examine a theory of phase contrast imaging (PCI) of cold atomic gases, first introduced by us in Phys. Rev. Lett. 112, 233602 (2014). We model the PCI measurement by directly calculating the entangled state between the light and the atoms due to the ac Stark shift, which induces a conditional phase shift on the light depending upon the atomic state. By interfering the light that passes through the BEC with the original light, one can obtain information of the atomic state at a single-shot level. We derive an exact expression for a measurement operator that embodies the information obtained from PCI, as well as the backaction on the atomic state. By the use of exact expressions for the measurement process, we go beyond the continuous variables approximation such that the non-Gaussian regime can be accessed for both the measured state and the postmeasurement state. Features such as the photon probability density, signal, signal variance, Fisher information, error of the measurement, and the backaction are calculated by applying the measurement operator to an atomic two-spin-state system. For an atomic state that is initially in a spin-coherent state, we obtain analytical expression for these quantities. There is an optimal atom-light interaction time that scales inversely proportional to the number of atoms, which maximizes the information readout.