Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2501.01309

Constructive impact of Wannier-Stark field on environment-boosted quantum batteries

Ghosh, Animesh, Tanoy Kanti Konar, Leela Ganesh Chandra Lakkaraju, Aditi Sen De

Published Jan 2, 2025• 3 citations
arXivHTMLPDF

Abstract

Using the ground states of the Bose- and Fermi-Hubbard model as the battery's initial state, we demonstrate that using the Wannier-Stark (WS) field for charging in addition to onsite interactions can increase the maximum power of the battery. Although the benefit is not ubiquitous, bosonic batteries are more affected by the WS field than fermionic ones. In particular, there exists a critical WS field strength above which the power gets increased in the battery. Further, we determine a closed form expression of the stored work when the battery is in the ground state of the Bose- and Fermi-Hubbard model with only hopping term and the charging is carried out with onsite interactions and WS field irrespective of lattice-size of the battery. Moreover, we exhibit that it is possible to extract work in the fermionic batteries even without charging when the edge sites are attached to two local thermal baths having high temperatures -- this process we refer to as {\it environment-assisted ergotropy}. Note, however, that the bosonic batteries are able to exhibit such an environmental benefit in the transient regime when the lattice-size is increased and when Wannier-Stark field is present. Nonetheless, if the onsite interaction or WS potential with a critical strength is utilized as a charger, energy can be stored and extracted from both bosonic and fermionic batteries in the presence of the thermal baths.

DOI
10.48550/arxiv.2501.01309

Related papers

Reservoir-assisted quantum battery charging at finite temperatures

Y. Yao, X. Q. Shao

Quantum batteries, as highly efficient energy storage devices, have garnered significant research interest. A key challenge in their development is to maximize the extractable energy (ergotropy) when operating within a finite-temperature reservoir. To address this, we applied quantum feedback control to the charger and investigated the effects of fermionic and bosonic thermal reservoirs on the performance of quantum batteries, including stored energy, ergotropy, and charging efficiency, in an open environment. Our findings reveal that, regardless of the type of thermal reservoir, the system exhibits optimal charging parameters. In particular, in a fermionic thermal reservoir, increasing the environmental temperature enhances battery performance, enabling stable and efficient charging. In contrast, within a bosonic thermal reservoir, higher temperatures hinder energy storage and extraction, significantly reducing charging efficiency. Additionally, we explored the impact of battery size and found that, under a fermionic reservoir, increasing the battery size appropriately can further improve performance.

arXiv:2502.12839•Physical Review A•May 28, 2025•19 citations

Quantum battery with ultracold atoms: Bosons versus fermions

Tanoy Kanti Konar, Leela Ganesh Chandra Lakkaraju, Srijon Ghosh +1 more

We design a quantum battery made up of bosons or fermions in an ultracold-atom setup, described by Fermi-Hubbard and Bose-Hubbard models, respectively. We compare the performance of bosons and fermions to determine which can function as a quantum battery more effectively given a particular on-site interaction and initial state temperature. The performance of a quantum battery is quantified by the maximum energy stored per unit time over the evolution under an on-site charging Hamiltonian. We report that when the initial battery state is in the ground state, fermions outperform bosons in a certain configuration over a large range of on-site interactions which are shown analytically for a smaller number of lattice sites and numerically for a considerable number of sites. Bosons take the lead when the temperature is comparatively high in the initial state for a longer range of on-site interaction. We study a number of up and down fermions as well as the number of bosons per site to find the optimal filling factor for maximizing the average power of the battery. We also introduce disorder in both on-site and hopping parameters and demonstrate that the maximum average power is robust against impurities. Moreover, we identify a range of tuning parameters in the fermionic and bosonic systems where the disorder-enhanced power is observed.

arXiv:2109.06816•Physical Review A•Aug 29, 2022•49 citations

Fast charging of a quantum battery assisted by noise

Srijon Ghosh, Titas Chanda, Shiladitya Mal +1 more

We investigate the performance of a quantum battery exposed to local Markovian and non-Markovian dephasing noises. The battery is initially prepared as the ground state of a one-dimensional transverse $XY$ model with open boundary condition and is charged (discharged) via interactions with local bosonic reservoirs. We show that in the transient regime, the quantum battery (QB) can store energy faster and has a higher maximum extractable work, quantified via ergotropy, when it is affected by local phase-flip or bit-flip Markovian noise compared to the case when there is no noise in the system. In both the charging and discharging processes, we report the enhancement in work output as well as in ergotropy when all the spins are affected by a non-Markovian Ohmic bath in both the transient and the steady-state regimes, thereby showing a counterintuitive advantage of decoherence in the QB. In both Markovian and non-Markovian cases, we identify the system parameters and the corresponding noise models which lead to maximum enhancement of work output and ergotropy. Moreover, we show that the benefit due to noise persists even with the initial state being prepared at a moderate temperature.

arXiv:2005.12859•Physical Review A•Sep 9, 2021•133 citations

Quantum battery systems: Analyzing two-mode field charging, qubit interactions, and environmental influences

Ahmed A. Zahia, Mahmoud Youssef Abd‐Rabbou, Eied Mahmoud Khalil +1 more

This study investigates the dynamical behaviour of a two-cell (two-atom) quantum battery driven by a two-mode charging field. We explore the influence of varying interaction strengths on the system?s performance. This includes increasing the coupling between cells and charging fields, and cells themselves through a dipole interaction and Ising interaction along the z-axis. Additionally, the impact of environmental effects is examined by incorporating decay terms for both the charging fields and the cells. Our analysis focuses on key performance metrics such as stored energy, average power, ergotropy, energy fluctuations, and quantum speed limit time. The results reveal that the environment negatively impacts stored energy, power, and ergotropy, but leads to higher speed limits. Enhanced coupling between the charging fields and the cells improves the studied correlations, promoting efficient energy transfer and decreasing speed limit time. Increasing the coupling between the cells, either via the dipole or Ising interaction, generally exhibits a similar effect. This involves a decrease in maximum achievable energy storage, accompanied by the emergence of more erratic energy fluctuations.

Thermal Science•Jan 1, 2024•9 citations

Quantum battery of interacting spins with environmental noise

Fang Ping Zhao, Fu-Quan Dou, Qing Zhao

A quantum battery is a temporary energy-storage system. We construct a quantum battery model of an $N$-spin chain with nearest-neighbor hopping interaction and investigate the quantum battery's charging process. We obtain the maximum energy in the quantum battery charged by a coherent cavity driving field or a thermal heat bath. We confirm that for a finite-length spin chain, thermal charging results in a nonzero ergotropy, contradicting a previous result: An incoherent heat source cannot charge a single-spin quantum battery. The nearest-neighbor hopping interaction induces energy-band splitting, enhancing the energy storage and the ergotropy of the quantum battery. We find a critical point in the energy and ergotropy resulting from the ground-state quantum phase transition after which the energy significantly enhances. Finally, we also find that disorder increases the energy of the quantum battery.

arXiv:2012.06187•Physical Review A•Mar 30, 2021•111 citations

Boosting the performance of a Lipkin-Meshkov-Glick quantum battery via symmetry-breaking quenches or a single-mode bosonic charger

Le Bin Ho, Duc Tuan Hoang, Tran Duong Anh-Tai +2 more

We explore the operation of quantum batteries in the Lipkin-Meshkov-Glick (LMG) model, when they are charged either through a sudden quench in the magnetic field strength or by coupling them to a single-mode bosonic charger. Through initializing the battery in either the symmetric or broken symmetry phases of the LMG model we analyze how the different spectral properties can affect the performance of both the charging and discharging of the battery. In particular, we show that by quenching the magnetic field strength from the symmetric phase to the broken phase, we can achieve a significant enhancement in stored energy, as well as stable and efficient ergotropy extraction. Similar observations can be made when introducing weak coupling between the battery with the bosonic charger, while the amount of stored work and ergotropy saturate at strong coupling. These findings emphasize the importance of the magnetic field dynamics or environmental coupling in optimizing charging performance, which could lead to practical applications in quantum energy storage.

quant-pharXiv:2602.17121•Physical Review A•Feb 20, 2026•3 citations
Using the ground states of the Bose- and Fermi-Hubbard model as the battery's initial state, we demonstrate that using the Wannier-Stark (WS) field for charging in addition to onsite interactions can increase the maximum power of the battery. Although the benefit is not ubiquitous, bosonic batteries are more affected by the WS field than fermionic ones. In particular, there exists a critical WS field strength above which the power gets increased in the battery. Further, we determine a closed form expression of the stored work when the battery is in the ground state of the Bose- and Fermi-Hubbard model with only hopping term and the charging is carried out with onsite interactions and WS field irrespective of lattice-size of the battery. Moreover, we exhibit that it is possible to extract work in the fermionic batteries even without charging when the edge sites are attached to two local thermal baths having high temperatures -- this process we refer to as {\it environment-assisted ergotropy}. Note, however, that the bosonic batteries are able to exhibit such an environmental benefit in the transient regime when the lattice-size is increased and when Wannier-Stark field is present. Nonetheless, if the onsite interaction or WS potential with a critical strength is utilized as a charger, energy can be stored and extracted from both bosonic and fermionic batteries in the presence of the thermal baths.
Quantum batteries, as highly efficient energy storage devices, have garnered significant research interest. A key challenge in their development is to maximize the extractable energy (ergotropy) when operating within a finite-temperature reservoir. To address this, we applied quantum feedback control to the charger and investigated the effects of fermionic and bosonic thermal reservoirs on the performance of quantum batteries, including stored energy, ergotropy, and charging efficiency, in an open environment. Our findings reveal that, regardless of the type of thermal reservoir, the system exhibits optimal charging parameters. In particular, in a fermionic thermal reservoir, increasing the environmental temperature enhances battery performance, enabling stable and efficient charging. In contrast, within a bosonic thermal reservoir, higher temperatures hinder energy storage and extraction, significantly reducing charging efficiency. Additionally, we explored the impact of battery size and found that, under a fermionic reservoir, increasing the battery size appropriately can further improve performance.
We design a quantum battery made up of bosons or fermions in an ultracold-atom setup, described by Fermi-Hubbard and Bose-Hubbard models, respectively. We compare the performance of bosons and fermions to determine which can function as a quantum battery more effectively given a particular on-site interaction and initial state temperature. The performance of a quantum battery is quantified by the maximum energy stored per unit time over the evolution under an on-site charging Hamiltonian. We report that when the initial battery state is in the ground state, fermions outperform bosons in a certain configuration over a large range of on-site interactions which are shown analytically for a smaller number of lattice sites and numerically for a considerable number of sites. Bosons take the lead when the temperature is comparatively high in the initial state for a longer range of on-site interaction. We study a number of up and down fermions as well as the number of bosons per site to find the optimal filling factor for maximizing the average power of the battery. We also introduce disorder in both on-site and hopping parameters and demonstrate that the maximum average power is robust against impurities. Moreover, we identify a range of tuning parameters in the fermionic and bosonic systems where the disorder-enhanced power is observed.
We investigate the performance of a quantum battery exposed to local Markovian and non-Markovian dephasing noises. The battery is initially prepared as the ground state of a one-dimensional transverse XYXYXY model with open boundary condition and is charged (discharged) via interactions with local bosonic reservoirs. We show that in the transient regime, the quantum battery (QB) can store energy faster and has a higher maximum extractable work, quantified via ergotropy, when it is affected by local phase-flip or bit-flip Markovian noise compared to the case when there is no noise in the system. In both the charging and discharging processes, we report the enhancement in work output as well as in ergotropy when all the spins are affected by a non-Markovian Ohmic bath in both the transient and the steady-state regimes, thereby showing a counterintuitive advantage of decoherence in the QB. In both Markovian and non-Markovian cases, we identify the system parameters and the corresponding noise models which lead to maximum enhancement of work output and ergotropy. Moreover, we show that the benefit due to noise persists even with the initial state being prepared at a moderate temperature.
This study investigates the dynamical behaviour of a two-cell (two-atom) quantum battery driven by a two-mode charging field. We explore the influence of varying interaction strengths on the system?s performance. This includes increasing the coupling between cells and charging fields, and cells themselves through a dipole interaction and Ising interaction along the z-axis. Additionally, the impact of environmental effects is examined by incorporating decay terms for both the charging fields and the cells. Our analysis focuses on key performance metrics such as stored energy, average power, ergotropy, energy fluctuations, and quantum speed limit time. The results reveal that the environment negatively impacts stored energy, power, and ergotropy, but leads to higher speed limits. Enhanced coupling between the charging fields and the cells improves the studied correlations, promoting efficient energy transfer and decreasing speed limit time. Increasing the coupling between the cells, either via the dipole or Ising interaction, generally exhibits a similar effect. This involves a decrease in maximum achievable energy storage, accompanied by the emergence of more erratic energy fluctuations.
A quantum battery is a temporary energy-storage system. We construct a quantum battery model of an NNN-spin chain with nearest-neighbor hopping interaction and investigate the quantum battery's charging process. We obtain the maximum energy in the quantum battery charged by a coherent cavity driving field or a thermal heat bath. We confirm that for a finite-length spin chain, thermal charging results in a nonzero ergotropy, contradicting a previous result: An incoherent heat source cannot charge a single-spin quantum battery. The nearest-neighbor hopping interaction induces energy-band splitting, enhancing the energy storage and the ergotropy of the quantum battery. We find a critical point in the energy and ergotropy resulting from the ground-state quantum phase transition after which the energy significantly enhances. Finally, we also find that disorder increases the energy of the quantum battery.
We explore the operation of quantum batteries in the Lipkin-Meshkov-Glick (LMG) model, when they are charged either through a sudden quench in the magnetic field strength or by coupling them to a single-mode bosonic charger. Through initializing the battery in either the symmetric or broken symmetry phases of the LMG model we analyze how the different spectral properties can affect the performance of both the charging and discharging of the battery. In particular, we show that by quenching the magnetic field strength from the symmetric phase to the broken phase, we can achieve a significant enhancement in stored energy, as well as stable and efficient ergotropy extraction. Similar observations can be made when introducing weak coupling between the battery with the bosonic charger, while the amount of stored work and ergotropy saturate at strong coupling. These findings emphasize the importance of the magnetic field dynamics or environmental coupling in optimizing charging performance, which could lead to practical applications in quantum energy storage.