Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2412.20734 · Physical Review Applied

Ferromagnetic traps for quasicontinuous operation of optical nanofiber interfaces

Ruijuan Liu, Jun Bo Wu, Yuan Heng Jiang, Yanting Zhao, Saijun Wu

Published Jul 31, 2025• 3 citations
arXivHTMLPDF

Abstract

A soft ferromagnetic plate uniformizes tesla-level fields generated by attached permanent magnets, producing a smooth and electronically tunable surface field on the opposite side. By arranging $n$ precisely fabricated rectangular plates, a nearly ideal magnetic quadrupole field with a substantial gradient can be created at the center. This robust and rapidly tunable field configuration is well suited for two-dimensional magneto-optical trapping (2D MOT) and magnetic guiding of cold atoms. By aligning an optical nanofiber (ONF) along the zero-field line of a planar 2D MOT in a two-plate assembly, we demonstrate quasicontinuous, field-free operation of the quantum optical interface without switching off the magnetic field. Transient transmission spectroscopy with nanosecond laser pulses is performed on the ${}^{87}\mathrm{Rb}\phantom{\rule{0.2em}{0ex}}D2$ line at a measurement repetition rate as high as 250 kHz. The observed line broadening, while not yet fully understood, is partially attributed to residual magnetic fields in the $n=2$ assembly. Through additional measurements and simulations, we verify that these residual fields can be fully eliminated in an $n=4$ assembly, resulting in an ultrastraight 2D trap that supports uniform light-atom interaction over exceptionally long, field-free distances. We extend our discussion to $n=6$, $n=8$ designs with similar uniformity but multiple zero-field lines. With its strong gradient for magnetic trapping, the ferromagnetic devices also enable quantum optical scenarios featuring interactions between coguided atoms and photons at ONF interfaces.

DOI
10.1103/413r-dn5p

Related papers

A dark-line two-dimensional magneto-optical trap of 85Rb atoms with high optical depth

Shanchao Zhang, J. F. Chen, Chang Liu +4 more

We describe the apparatus of a dark-line two-dimensional (2D) magneto-optical trap (MOT) of (85)Rb cold atoms with high optical depth (OD). Different from the conventional configuration, two (of three) pairs of trapping laser beams in our 2D MOT setup do not follow the symmetry axes of the quadrupole magnetic field: they are aligned with 45° angles to the longitudinal axis. Two orthogonal repumping laser beams have a dark-line volume in the longitudinal axis at their cross over. With a total trapping laser power of 40 mW and repumping laser power of 18 mW, we obtain an atomic OD up to 160 in an electromagnetically induced transparency (EIT) scheme, which corresponds to an atomic-density-length product NL = 2.05 × 10(15) m(-2). In a closed two-state system, the OD can become as large as more than 600. Our 2D MOT configuration allows full optical access of the atoms in its longitudinal direction without interfering with the trapping and repumping laser beams spatially. Moreover, the zero magnetic field along the longitudinal axis allows the cold atoms maintain a long ground-state coherence time without switching off the MOT magnetic field, which makes it possible to operate the MOT at a high repetition rate and a high duty cycle. Our 2D MOT is ideal for atomic-ensemble-based quantum optics applications, such as EIT, entangled photon pair generation, optical quantum memory, and quantum information processing.

Review of Scientific Instruments•Jul 1, 2012•83 citations

Light-induced, fictitious magnetic trapping of cold alkali-metal atoms using an optical-tweezer–nanofiber hybrid platform

Alexey Vylegzhanin, Dylan Brown, Sergei Abdrakhmanov +1 more

We present a magnetic trapping scheme for cold Rb 87 atoms based on light-induced fictitious magnetic fields generated by the evanescent field of an optical nanofiber (ONF) integrated with optical tweezers. We calculate and compare the trapping potentials for both Gaussian and Laguerre-Gaussian modes of the tweezer beam, combined with a quasilinearly polarized ONF-guided field. Based on the optical powers in the tweezer and ONF modes, we analyze the trap depths and the positions of the potential minima from the nanofiber surface. We show that, by varying the optical powers in the two fields, the trap position can be tuned over several hundred nanometers while simultaneously influencing the trap depth and trap frequencies. Such control over the atom-surface position is essential for studying distance-dependent effects on atoms trapped near a dielectric surface and optimizing atom-photon interfaces for quantum technology applications.

arXiv:2412.04809•Physical Review A•Jan 21, 2026•5 citations

冷たいルビジウム原子と光ナノファイバーモードとのエバネッセント場媒介相互作用

Ratnesh Kumar Gupta

Optical nanofibers (ONFs) have shown promising potential for quantum technology developments. The tight transverse confinement of guided light over an extended length (> 1000!) offers strong atom-light interactions with potential long-range atom-atom interactions mediated by the guided light, allowing for better scalability in many quantum information applications than their corresponding free-space implementations. We demonstrated, experimentally, an electric quadrupole transition and a single-frequency two-photon transition in cold 87Rb atoms driven by nanofiber-guided light, establishing ONFs as excellent platforms for potential applications in compact fiber-based clocks and correlated photon pair sources. ONFs are well-suited for nonlinear collective interactions, such as four-wave mixing and superradiance, that require an ensemble of phase-matched quantum emitters coupled to a common radiation field. An effective system is a 1D array of few hundred atoms trapped near an ONF surface and coupled with the guided mode. A crucial requirement is maximizing the number of trapped atoms which remains challenging in the absence of a quantitative description of atom dynamics during the trap-loading process involving many-body interactions and complex scattering process. We experimentally optimized, leveraging the ability of machine learning algorithms, the number of 87Rb atoms loaded in a shallow fiber-based dipole trap by parametrizing the control of magneto-optical trap parameters. This sets the first step toward planned studies on optical nanofiber mediated collective atom-light interactions and nearest-neighbor interactions in a 1D lattice of Rydberg atoms.

•Jun 1, 2022•0 citations

Towards a fictitious magnetic field trap for both ground and Rydberg state 87Rb atoms via the evanescent field of an optical nanofiber

Alexey Vylegzhanin, Dylan Brown, Danil Kornovan +2 more

Abstract Cold Rydberg atoms, known for their long lifetimes and strong dipole-dipole interactions that lead to the Rydberg blockade phenomenon, are among the most promising platforms for quantum simulations, quantum computation and quantum networks. However, a major limitation to the performance of Rydberg atom-based platforms is dephasing, which can be caused by atomic motion within the trap. Here, we propose a trap for 87Rb cold atoms that confines both the electronic ground state and a Rydberg state, engineered to minimize the differential light shifts between the two states. This is achieved by combining a fictitious magnetic field induced by optical nanofiber (ONF) guided light and an external bias magnetic field. We calculate trap potentials for the cases of one- and two-guided modes with quasi-linear and quasi-circular polarizations, and calculate trap depths and trap frequencies for different values of laser power and bias fields. Moreover, we discuss the impact of the quadrupole polarisability of the Rydberg atoms on the trap potential and demonstrate how the size of a Rydberg atom influences the ponderomotive potential generated by the nanofiber-guided light field. This work expands on the idea of light-induced fictitious magnetic field traps and presents a practical approach for creating quantum networks using Rydberg atoms integrated with ONFs to generate 1D atom arrays.

arXiv:2507.12827•New Journal of Physics•Jul 1, 2025•5 citations

Tapered optical nanofiber for light-atom interfacing

Aveek Chandra

This project aims to develop scientific as well as technical foundations towards realization of a novel platform for light-matter interaction based on tapered optical nanofibers that enable to interface neutral atoms in their vicinity. A setup for magneto-optical trap (MOT) has been built. Tapered nanofibers (TNFs) of sub-wavelength diameter, with transmission of 95 percent have been fabricated and characterized. Next, a nanofiber is transferred into the MOT setup and installed inside the vacuum chamber. The MOT cloud and nanofiber are made to spatially overlap inside ultra-high vacuum (UHV). Coupling of fluorescence of MOT into the guided mode of TNF has been observed. This clearly shows the coupling of atoms with the fiber-guided mode and that our interface works. In addition, 65-70 percent absorption of a free space beam by the atomic cloud has been observed and the relevant MOT parameters are obtained from it. Our efforts are directed towards observing interaction of atoms with the fiber-guided light via evanescent field. Attempts have been made to observe absorption of a probe beam through the nanofiber by the MOT cloud and techniques for switching on-off the MOT beams, the probe beam and the magnetic field are developed for that purpose. Ultimately, the goal will be to trap atoms in the vicinity of a nanofiber enabling to reach a large optical depth accompanied by the ability to reach high intensities for low optical power. I will present my work on the development of this MOT-nanofiber interface - a new promising platform for research in nonlinear quantum optics, quantum information science and technology, quantum communication and hybrid quantum system.

•Jan 1, 2014•0 citations

A robust and modular cesium magneto-optical trap using divergent laser beams

Paola Luna, Kenneth Nakasone, Andrei Zhukov +4 more

Magneto-optical traps (MOTs) are a workhorse technology for neutral-atom quantum sensing, simulation, and computing. Here, we demonstrate a MOT optimized for inertial quantum sensing and precision metrology applications. Our MOT traps $4\times10^8$ cesium (Cs) atoms in a robust, modular system that achieves stable operation through two design features: (1) we use divergent cooling laser beams to reduce unwanted reflections and (2) optical elements are mounted in a fiber-coupled, compact, and modular cage rigidly attached to the vacuum chamber. Following polarization-gradient cooling (PGC), the system produces atom samples with temperatures below 10 $μ$K, similar to those achieved in conventional MOTs that use collimated laser beams. In addition, we observe trapping of $2\times10^7$ Cs atoms in a non-conventional MOT geometry, where the cooling laser beams are diagonal to the principal axis of the quadrupole magnetic field.

physics.atom-phCross-listedarXiv:2607.13145•AVS Quantum Science•Jul 16, 2026•0 citations
A soft ferromagnetic plate uniformizes tesla-level fields generated by attached permanent magnets, producing a smooth and electronically tunable surface field on the opposite side. By arranging nnn precisely fabricated rectangular plates, a nearly ideal magnetic quadrupole field with a substantial gradient can be created at the center. This robust and rapidly tunable field configuration is well suited for two-dimensional magneto-optical trapping (2D MOT) and magnetic guiding of cold atoms. By aligning an optical nanofiber (ONF) along the zero-field line of a planar 2D MOT in a two-plate assembly, we demonstrate quasicontinuous, field-free operation of the quantum optical interface without switching off the magnetic field. Transient transmission spectroscopy with nanosecond laser pulses is performed on the 87RbD2{}^{87}\mathrm{Rb}\phantom{\rule{0.2em}{0ex}}D287RbD2 line at a measurement repetition rate as high as 250 kHz. The observed line broadening, while not yet fully understood, is partially attributed to residual magnetic fields in the n=2n=2n=2 assembly. Through additional measurements and simulations, we verify that these residual fields can be fully eliminated in an n=4n=4n=4 assembly, resulting in an ultrastraight 2D trap that supports uniform light-atom interaction over exceptionally long, field-free distances. We extend our discussion to n=6n=6n=6, n=8n=8n=8 designs with similar uniformity but multiple zero-field lines. With its strong gradient for magnetic trapping, the ferromagnetic devices also enable quantum optical scenarios featuring interactions between coguided atoms and photons at ONF interfaces.
We describe the apparatus of a dark-line two-dimensional (2D) magneto-optical trap (MOT) of (85)Rb cold atoms with high optical depth (OD). Different from the conventional configuration, two (of three) pairs of trapping laser beams in our 2D MOT setup do not follow the symmetry axes of the quadrupole magnetic field: they are aligned with 45° angles to the longitudinal axis. Two orthogonal repumping laser beams have a dark-line volume in the longitudinal axis at their cross over. With a total trapping laser power of 40 mW and repumping laser power of 18 mW, we obtain an atomic OD up to 160 in an electromagnetically induced transparency (EIT) scheme, which corresponds to an atomic-density-length product NL = 2.05 × 10(15) m(-2). In a closed two-state system, the OD can become as large as more than 600. Our 2D MOT configuration allows full optical access of the atoms in its longitudinal direction without interfering with the trapping and repumping laser beams spatially. Moreover, the zero magnetic field along the longitudinal axis allows the cold atoms maintain a long ground-state coherence time without switching off the MOT magnetic field, which makes it possible to operate the MOT at a high repetition rate and a high duty cycle. Our 2D MOT is ideal for atomic-ensemble-based quantum optics applications, such as EIT, entangled photon pair generation, optical quantum memory, and quantum information processing.
We present a magnetic trapping scheme for cold Rb 87 atoms based on light-induced fictitious magnetic fields generated by the evanescent field of an optical nanofiber (ONF) integrated with optical tweezers. We calculate and compare the trapping potentials for both Gaussian and Laguerre-Gaussian modes of the tweezer beam, combined with a quasilinearly polarized ONF-guided field. Based on the optical powers in the tweezer and ONF modes, we analyze the trap depths and the positions of the potential minima from the nanofiber surface. We show that, by varying the optical powers in the two fields, the trap position can be tuned over several hundred nanometers while simultaneously influencing the trap depth and trap frequencies. Such control over the atom-surface position is essential for studying distance-dependent effects on atoms trapped near a dielectric surface and optimizing atom-photon interfaces for quantum technology applications.
Optical nanofibers (ONFs) have shown promising potential for quantum technology developments. The tight transverse confinement of guided light over an extended length (> 1000!) offers strong atom-light interactions with potential long-range atom-atom interactions mediated by the guided light, allowing for better scalability in many quantum information applications than their corresponding free-space implementations. We demonstrated, experimentally, an electric quadrupole transition and a single-frequency two-photon transition in cold 87Rb atoms driven by nanofiber-guided light, establishing ONFs as excellent platforms for potential applications in compact fiber-based clocks and correlated photon pair sources. ONFs are well-suited for nonlinear collective interactions, such as four-wave mixing and superradiance, that require an ensemble of phase-matched quantum emitters coupled to a common radiation field. An effective system is a 1D array of few hundred atoms trapped near an ONF surface and coupled with the guided mode. A crucial requirement is maximizing the number of trapped atoms which remains challenging in the absence of a quantitative description of atom dynamics during the trap-loading process involving many-body interactions and complex scattering process. We experimentally optimized, leveraging the ability of machine learning algorithms, the number of 87Rb atoms loaded in a shallow fiber-based dipole trap by parametrizing the control of magneto-optical trap parameters. This sets the first step toward planned studies on optical nanofiber mediated collective atom-light interactions and nearest-neighbor interactions in a 1D lattice of Rydberg atoms.
Abstract Cold Rydberg atoms, known for their long lifetimes and strong dipole-dipole interactions that lead to the Rydberg blockade phenomenon, are among the most promising platforms for quantum simulations, quantum computation and quantum networks. However, a major limitation to the performance of Rydberg atom-based platforms is dephasing, which can be caused by atomic motion within the trap. Here, we propose a trap for 87Rb cold atoms that confines both the electronic ground state and a Rydberg state, engineered to minimize the differential light shifts between the two states. This is achieved by combining a fictitious magnetic field induced by optical nanofiber (ONF) guided light and an external bias magnetic field. We calculate trap potentials for the cases of one- and two-guided modes with quasi-linear and quasi-circular polarizations, and calculate trap depths and trap frequencies for different values of laser power and bias fields. Moreover, we discuss the impact of the quadrupole polarisability of the Rydberg atoms on the trap potential and demonstrate how the size of a Rydberg atom influences the ponderomotive potential generated by the nanofiber-guided light field. This work expands on the idea of light-induced fictitious magnetic field traps and presents a practical approach for creating quantum networks using Rydberg atoms integrated with ONFs to generate 1D atom arrays.
This project aims to develop scientific as well as technical foundations towards realization of a novel platform for light-matter interaction based on tapered optical nanofibers that enable to interface neutral atoms in their vicinity. A setup for magneto-optical trap (MOT) has been built. Tapered nanofibers (TNFs) of sub-wavelength diameter, with transmission of 95 percent have been fabricated and characterized. Next, a nanofiber is transferred into the MOT setup and installed inside the vacuum chamber. The MOT cloud and nanofiber are made to spatially overlap inside ultra-high vacuum (UHV). Coupling of fluorescence of MOT into the guided mode of TNF has been observed. This clearly shows the coupling of atoms with the fiber-guided mode and that our interface works. In addition, 65-70 percent absorption of a free space beam by the atomic cloud has been observed and the relevant MOT parameters are obtained from it. Our efforts are directed towards observing interaction of atoms with the fiber-guided light via evanescent field. Attempts have been made to observe absorption of a probe beam through the nanofiber by the MOT cloud and techniques for switching on-off the MOT beams, the probe beam and the magnetic field are developed for that purpose. Ultimately, the goal will be to trap atoms in the vicinity of a nanofiber enabling to reach a large optical depth accompanied by the ability to reach high intensities for low optical power. I will present my work on the development of this MOT-nanofiber interface - a new promising platform for research in nonlinear quantum optics, quantum information science and technology, quantum communication and hybrid quantum system.
Magneto-optical traps (MOTs) are a workhorse technology for neutral-atom quantum sensing, simulation, and computing. Here, we demonstrate a MOT optimized for inertial quantum sensing and precision metrology applications. Our MOT traps 4×1084\times10^84×108 cesium (Cs) atoms in a robust, modular system that achieves stable operation through two design features: (1) we use divergent cooling laser beams to reduce unwanted reflections and (2) optical elements are mounted in a fiber-coupled, compact, and modular cage rigidly attached to the vacuum chamber. Following polarization-gradient cooling (PGC), the system produces atom samples with temperatures below 10 μμμK, similar to those achieved in conventional MOTs that use collimated laser beams. In addition, we observe trapping of 2×1072\times10^72×107 Cs atoms in a non-conventional MOT geometry, where the cooling laser beams are diagonal to the principal axis of the quadrupole magnetic field.