Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2412.07363 · Journal of Applied Physics

Development of a bipolar 50 V output digital-to-analog converter system for ion-shuttling operations

T. Oshio, R. Nishimoto, Takashi Higuchi, K. Hayasaka, Keisuke Koike, Shinichi Morisaka, T. Miyoshi, Ryutaro Ohira, U. Tanaka

Published Apr 9, 2025• 4 citations
arXivHTMLPDF

Abstract

The quantum charge-coupled device (QCCD) is one of the notable architectures to achieve large-scale trapped-ion quantum computers. To realize QCCD architecture, ions must be transported quickly while minimizing motional excitation. High-voltage sources are necessary to achieve such high-quality ion transport through a high secular frequency. In this study, we report the development of a field programmable gate array-based digital-to-analog converter (DAC) system with an output voltage range of ±50 V and demonstrate its effectiveness in ion transport operations. The device provides a 16-channel analog output, a maximum update rate of 16 mega updates per second, a slew rate of 20 V/μs, and a bandwidth of >200 kHz. By optimizing the voltage sets with quadratic programming, we experimentally confirmed that this DAC system can achieve more than twice the secular frequency attainable when its output range is restricted to ±10 V, which is consistent with the fact that scaling all electrode voltages by a factor of 5 will scale the secular frequency by 5. Since the output range of many commercially available DACs is commonly limited to ±10 V, this increase is effective for ion-shuttling operations, such as transport, split, and merge. The developed DAC system has the potential to increase the speed of ion transport thereby reducing processing times in QCCD-based quantum computers.

DOI
10.1063/5.0252358

Related papers

Multiplexed Control at Scale for Electrode Arrays in Trapped-Ion Quantum Processors

Ryutaro Ohira, Shinichi Morisaka, Ippei Nakamura +2 more

The scaling up of trapped-ion quantum processors based on the quantum charge-coupled device (QCCD) architecture is difficult owing to the extensive electronics and high-density wiring required to control numerous trap electrodes. In conventional QCCD architectures, each trap electrode is controlled via a dedicated digital-to-analog converter (DAC). The conventional approach places an overwhelming demand on electronic resources and wiring complexity. This is because the number of trap electrodes typically exceeds the number of trapped-ion qubits. This study proposes a method that leverages a high-speed DAC to generate time-division multiplexed signals to control a large-scale QCCD trapped-ion quantum processor. The proposed method replaces conventional DACs with a single high-speed DAC that generates the complete voltage waveforms required to control the trap electrodes, thereby significantly reducing the wiring complexity and overall resource requirements. Based on realistic parameters and commercially available electronics, our analysis demonstrates that a QCCD trapped-ion quantum computer with$\mathbf{1 0, 0 0 0}$trap electrodes can be controlled using only 13 field-programmable gate arrays and 104 high-speed DACs. This is in stark contrast to the$\mathbf{1 0, 0 0 0}$dedicated DACs required by conventional control methods. Consequently, employing this approach, we developed a proof-of-concept electronic system and evaluated its analog output performance.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•2 citations

Trapping an atomic ion using time-division multiplexed digital-to-analog converters

Ryutaro Ohira, Masanari Miyamoto, Shinichi Morisaka +4 more

Independent control of numerous electrodes in quantum charge-coupled device architectures presents a significant challenge for wiring and hardware scalability. To address this issue, we demonstrate a voltage control method based on time-division multiplexing (TDM). This approach utilizes a single high-update-rate digital-to-analog converter (DAC) to sequentially generate control signals for multiple electrodes, thereby reducing both the number of required DACs and associated wiring. We experimentally validate this concept by developing a 10-channel system that operates with only two DACs. The developed TDM-based voltage control system is applied to a surface electrode trap, where we successfully trap a single 40Ca+ ion and demonstrate a simple ion transport primitive. This approach offers a resource-efficient and scalable solution for advanced quantum computing systems based on trapped ions.

arXiv:2508.04093•Applied Physics Letters•Dec 8, 2025•2 citations

Closed-loop optimization of fast trapped-ion shuttling with sub-quanta excitation

Jonathan David Sterk, Henry Coakley, Joshua Goldberg +7 more

Abstract Shuttling ions at high speed and with low motional excitation is essential for realizing fast and high-fidelity algorithms in many trapped-ion-based quantum computing architectures. Achieving such performance is challenging due to the sensitivity of an ion to electric fields and the unknown and imperfect environmental and control variables that create them. Here we implement a closed-loop optimization of the voltage waveforms that control the trajectory and axial frequency of an ion during transport in order to minimize the final motional excitation. The resulting waveforms realize fast round-trip transport of a trapped ion across multiple electrodes at speeds of 0.5 electrodes per microsecond (35 m·s −1 for a one-way transport of 210 μm in 6 μs) with a maximum of 0.36 ± 0.08 mean quanta gain. This sub-quanta gain is independent of the phase of the secular motion at the distal location, obviating the need for an electric field impulse or time delay to eliminate the coherent motion.

arXiv:2201.07358•npj Quantum Information•Jun 20, 2022•29 citations

Cryogenic Time-Division-Multiplexed Voltage Control for Scalable Trapped-Ion Quantum Processors

Ryutaro Ohira, Shinichi Morisaka, Yoshinori Kurimoto +4 more

Trapped-ion quantum computers based on the quantum charge-coupled device architecture require on the order of ten trap electrodes per qubit, making the number of vacuum feedthroughs a bottleneck at the system scale. Time-division multiplexed (TDM)-based voltage control for trap electrodes provides a natural route to alleviate this constraint. However, previous studies have been limited to architectural proposals for static trap-potential compensation and room-temperature demonstrations of dynamic-electrode control, leaving cryogenic operation of TDM-based voltage control for static and dynamic electrodes experimentally unexplored. In this study, we develop and cryogenically validate TDM-based voltage control schemes for two distinct electrode classes. For static electrodes used in trap-potential compensation, we implement a 32-channel demultiplexed system operating at approximately 27~K, achieving an effective voltage update rate of 37.5~kHz with an output range of $\pm10~\mathrm{V}$ per channel. For dynamic electrodes used in ion operations, such as shuttling, we implement a four-channel demultiplexed system operating at approximately 14~K, achieving an effective voltage update rate of 1~MHz with a comparable output range. These results establish TDM-based voltage control as a practical approach for both electrode classes, providing a path for mitigating the vacuum feedthrough bottleneck in scalable trapped-ion quantum processors.

quant-pharXiv:2605.17824•Applied Physics Letters•May 19, 2026•1 citation

Shuttling for Scalable Trapped-Ion Quantum Computers

Daniel Schoenberger, Stefan Hillmich, Matthias Brandl +1 more

Trapped-ion quantum computers exhibit promising potential to provide platforms for high-quality qubits and reliable quantum computation. The quantum charge coupled device (QCCD) architecture is a leading example that offers a modular solution to enable the realization of scalable quantum computers, paving the way for practical quantum algorithms with large qubit numbers. Within these devices, ions can be shuttled (moved) throughout the trap and through different dedicated zones, e.g., a memory zone for storage and a processing zone for the actual computation. However, due to decoherence of the ions’ quantum states, the qubits lose their quantum information over time. Thus, the required time steps of shuttling operations should be minimized. In this work,1 we propose a heuristic approach to determining an efficient shuttling schedule, which orchestrates the movement operations within the device. Given a quantum algorithm and a device architecture, the proposed approach produces shuttling schedules with a close-to-minimal amount of time steps for small-size QCCD architectures. For large-scale QCCD devices, empirical evaluations show promising results with respect to quality of the solution as well as performance. An implementation of the proposed approach is publicly available as part of the open-source Munich Quantum Toolkit (MQT) athttps://github.com/cda-tum/mqt-ion-shuttler.

arXiv:2402.14065•IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems•Dec 9, 2024•40 citations

Fast continuous ion transport through X-junctions with low motional excitation for QCCD architectures

Jie Xiao, Zhao Wang, Chenghong Zhu +4 more

Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single $^{171}Yb^+$ ion through a 90° turn in $5μs$ at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about $30\%$ across various circuit types. The fraction of execution time spent on transport decreases from approximately $70\%$ to $55\%$. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.

quant-pharXiv:2610.14472•Oct 13, 2026•0 citations
The quantum charge-coupled device (QCCD) is one of the notable architectures to achieve large-scale trapped-ion quantum computers. To realize QCCD architecture, ions must be transported quickly while minimizing motional excitation. High-voltage sources are necessary to achieve such high-quality ion transport through a high secular frequency. In this study, we report the development of a field programmable gate array-based digital-to-analog converter (DAC) system with an output voltage range of ±50 V and demonstrate its effectiveness in ion transport operations. The device provides a 16-channel analog output, a maximum update rate of 16 mega updates per second, a slew rate of 20 V/μs, and a bandwidth of >200 kHz. By optimizing the voltage sets with quadratic programming, we experimentally confirmed that this DAC system can achieve more than twice the secular frequency attainable when its output range is restricted to ±10 V, which is consistent with the fact that scaling all electrode voltages by a factor of 5 will scale the secular frequency by 5. Since the output range of many commercially available DACs is commonly limited to ±10 V, this increase is effective for ion-shuttling operations, such as transport, split, and merge. The developed DAC system has the potential to increase the speed of ion transport thereby reducing processing times in QCCD-based quantum computers.
The scaling up of trapped-ion quantum processors based on the quantum charge-coupled device (QCCD) architecture is difficult owing to the extensive electronics and high-density wiring required to control numerous trap electrodes. In conventional QCCD architectures, each trap electrode is controlled via a dedicated digital-to-analog converter (DAC). The conventional approach places an overwhelming demand on electronic resources and wiring complexity. This is because the number of trap electrodes typically exceeds the number of trapped-ion qubits. This study proposes a method that leverages a high-speed DAC to generate time-division multiplexed signals to control a large-scale QCCD trapped-ion quantum processor. The proposed method replaces conventional DACs with a single high-speed DAC that generates the complete voltage waveforms required to control the trap electrodes, thereby significantly reducing the wiring complexity and overall resource requirements. Based on realistic parameters and commercially available electronics, our analysis demonstrates that a QCCD trapped-ion quantum computer with10,000\mathbf{1 0, 0 0 0}10,000trap electrodes can be controlled using only 13 field-programmable gate arrays and 104 high-speed DACs. This is in stark contrast to the10,000\mathbf{1 0, 0 0 0}10,000dedicated DACs required by conventional control methods. Consequently, employing this approach, we developed a proof-of-concept electronic system and evaluated its analog output performance.
Independent control of numerous electrodes in quantum charge-coupled device architectures presents a significant challenge for wiring and hardware scalability. To address this issue, we demonstrate a voltage control method based on time-division multiplexing (TDM). This approach utilizes a single high-update-rate digital-to-analog converter (DAC) to sequentially generate control signals for multiple electrodes, thereby reducing both the number of required DACs and associated wiring. We experimentally validate this concept by developing a 10-channel system that operates with only two DACs. The developed TDM-based voltage control system is applied to a surface electrode trap, where we successfully trap a single 40Ca+ ion and demonstrate a simple ion transport primitive. This approach offers a resource-efficient and scalable solution for advanced quantum computing systems based on trapped ions.
Abstract Shuttling ions at high speed and with low motional excitation is essential for realizing fast and high-fidelity algorithms in many trapped-ion-based quantum computing architectures. Achieving such performance is challenging due to the sensitivity of an ion to electric fields and the unknown and imperfect environmental and control variables that create them. Here we implement a closed-loop optimization of the voltage waveforms that control the trajectory and axial frequency of an ion during transport in order to minimize the final motional excitation. The resulting waveforms realize fast round-trip transport of a trapped ion across multiple electrodes at speeds of 0.5 electrodes per microsecond (35 m·s −1 for a one-way transport of 210 μm in 6 μs) with a maximum of 0.36 ± 0.08 mean quanta gain. This sub-quanta gain is independent of the phase of the secular motion at the distal location, obviating the need for an electric field impulse or time delay to eliminate the coherent motion.
Trapped-ion quantum computers based on the quantum charge-coupled device architecture require on the order of ten trap electrodes per qubit, making the number of vacuum feedthroughs a bottleneck at the system scale. Time-division multiplexed (TDM)-based voltage control for trap electrodes provides a natural route to alleviate this constraint. However, previous studies have been limited to architectural proposals for static trap-potential compensation and room-temperature demonstrations of dynamic-electrode control, leaving cryogenic operation of TDM-based voltage control for static and dynamic electrodes experimentally unexplored. In this study, we develop and cryogenically validate TDM-based voltage control schemes for two distinct electrode classes. For static electrodes used in trap-potential compensation, we implement a 32-channel demultiplexed system operating at approximately 27~K, achieving an effective voltage update rate of 37.5~kHz with an output range of ±10 V\pm10~\mathrm{V}±10 V per channel. For dynamic electrodes used in ion operations, such as shuttling, we implement a four-channel demultiplexed system operating at approximately 14~K, achieving an effective voltage update rate of 1~MHz with a comparable output range. These results establish TDM-based voltage control as a practical approach for both electrode classes, providing a path for mitigating the vacuum feedthrough bottleneck in scalable trapped-ion quantum processors.
Trapped-ion quantum computers exhibit promising potential to provide platforms for high-quality qubits and reliable quantum computation. The quantum charge coupled device (QCCD) architecture is a leading example that offers a modular solution to enable the realization of scalable quantum computers, paving the way for practical quantum algorithms with large qubit numbers. Within these devices, ions can be shuttled (moved) throughout the trap and through different dedicated zones, e.g., a memory zone for storage and a processing zone for the actual computation. However, due to decoherence of the ions’ quantum states, the qubits lose their quantum information over time. Thus, the required time steps of shuttling operations should be minimized. In this work,1 we propose a heuristic approach to determining an efficient shuttling schedule, which orchestrates the movement operations within the device. Given a quantum algorithm and a device architecture, the proposed approach produces shuttling schedules with a close-to-minimal amount of time steps for small-size QCCD architectures. For large-scale QCCD devices, empirical evaluations show promising results with respect to quality of the solution as well as performance. An implementation of the proposed approach is publicly available as part of the open-source Munich Quantum Toolkit (MQT) athttps://github.com/cda-tum/mqt-ion-shuttler.
Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single 171Yb+^{171}Yb^+171Yb+ ion through a 90° turn in 5μs5μs5μs at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about 30%30\%30% across various circuit types. The fraction of execution time spent on transport decreases from approximately 70%70\%70% to 55%55\%55%. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.