Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2411.10021 · Physical Review A

Measurement and feedforward correction of the fast phase noise of lasers

Tom Denecker, Yuki Torii Chew, Oscar Guillemant, G. Watanabe, Takafumi Tomita, Kenji Ohmori, Sylvain de Léséleuc

Published Apr 14, 2025• 10 citations
arXivHTMLPDF

Abstract

Lasers are the workhorse of quantum engineering in the atomic-molecular-optic community. However, phase noise of the laser, which can be especially large in popular semiconductor-based lasers, can limit gate fidelity. Here we present a fully fiberized instrument detecting and correcting the fast, submicrosecond, phase fluctuations of lasers. We demonstrate a measurement noise floor of less than 0.1 ${\mathrm{Hz}}^{2}$/Hz and a noise suppression of more than 20 dB for Fourier frequencies in the 1--10 MHz region (reaching up to 30 dB at 3 MHz), where noise is critical for Rydberg-based quantum gates. We observe the improvement offered by this fast-phase-noise eater on a Raman transition driven by two such stabilized lasers. These measurement and correction techniques are important tools for high-fidelity manipulation of the excited electronic states of atoms and molecules.

DOI
10.1103/physreva.111.042614

Related papers

Low phase noise cavity transmission self-injection locked diode laser system for atomic physics experiments

Ludwig Krinner, Kai Dietze, Lennart Pelzer +2 more

Lasers with high spectral purity are indispensable for optical clocks and for the coherent manipulation of atomic and molecular qubits in applications such as quantum computing and quantum simulation. While the stabilization of such lasers to a reference can provide a narrow linewidth, the widely used diode lasers exhibit fast phase noise that prevents high-fidelity qubit manipulation. In this paper, we demonstrate a self-injection locked diode laser system that utilizes a high-finesse cavity. This cavity not only provides a stable resonance frequency, it also acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40 Ca + -ion as a spectrum analyzer. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between −110 dBc/Hz and −120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates when using diode lasers in applications involving quantum logic spectroscopy, quantum simulation, and quantum computation.

arXiv:2311.03461•Optics Express•Apr 2, 2024•17 citations

Phase noise suppression in an optical-fiber-based interferometer using ultralow-noise lasers for quantum communication

Tsubasa Kashimura, Yuto Shitaka, Yohei Sugiyama +4 more

The frequency noise of an external-cavity diode laser locked to an ultralow-expansion cavity (cavity-stabilized laser) and a whispering-gallery-mode (WGM) cavity optical-feedback semiconductor laser (WGM laser) was evaluated. The frequency noise of the WGM laser was approximately two orders of magnitude smaller than that of the cavity-stabilized laser at high Fourier frequencies. Using the WGM laser, phase noise reduction of approximately two orders of magnitude was observed in the dual-band stabilization of an optical-fiber-based interferometer at high Fourier frequencies. This noise reduction should improve the measurement fidelity in quantum key and entanglement distributions in long-distance quantum communication.

Applied Physics Express•Aug 1, 2026•0 citations

Optical Spectrum Analyzer with Quantum-Limited Noise Floor

Michael Bishof, Xiaogang Zhang, Michael J. Martin +1 more

Interactions between atoms and lasers provide the potential for unprecedented control of quantum states. Fulfilling this potential requires detailed knowledge of frequency noise in optical oscillators with state-of-the-art stability. We demonstrate a technique that precisely measures the noise spectrum of an ultrastable laser using optical lattice-trapped 87Sr atoms as a quantum projection noise-limited reference. We determine the laser noise spectrum from near dc to 100 Hz via the measured fluctuations in atomic excitation, guided by a simple and robust theory model. The noise spectrum yields a 26(4) mHz linewidth at a central frequency of 429 THz, corresponding to an optical quality factor of 1.6×10(16). This approach improves upon optical heterodyne beats between two similar laser systems by providing information unique to a single laser and complements the traditionally used Allan deviation which evaluates laser performance at relatively long time scales. We use this technique to verify the reduction of resonant noise in our ultrastable laser via feedback from an optical heterodyne beat. Finally, we show that knowledge of our laser's spectrum allows us to accurately predict the laser-limited stability for optical atomic clocks.

arXiv:1303.6741•Physical Review Letters•Aug 30, 2013•84 citations

Fast phase stabilization of a low frequency beat note for atom interferometry

E. Oh, R. A. Horne, Charles A. Sackett

Atom interferometry experiments rely on the ability to obtain a stable signal that corresponds to an atomic phase. For interferometers that use laser beams to manipulate the atoms, noise in the lasers can lead to errors in the atomic measurement. In particular, it is often necessary to actively stabilize the optical phase between two frequency components of the beams. Typically this is achieved using a time-domain measurement of a beat note between the two frequencies. This becomes challenging when the frequency difference is small and the phase measurement must be made quickly. The method presented here instead uses a spatial interference detection to rapidly measure the optical phase for arbitrary frequency differences. A feedback system operating at a bandwidth of about 10 MHz could then correct the phase in about 3 μs. This time is short enough that the phase correction could be applied at the start of a laser pulse without appreciably degrading the fidelity of the atom interferometer operation. The phase stabilization system was demonstrated in a simple atom interferometer measurement of the (87)Rb recoil frequency.

Review of Scientific Instruments•Jun 1, 2016•5 citations

Enhanced Quantum State Transfer via Feedforward Cancellation of Optical Phase Noise

Benjamin Maddox, Jonathan M. Mortlock, Tom R. Hepworth +4 more

Many experimental platforms for quantum science depend on state control via laser fields. Frequently, however, the control fidelity is limited by optical phase noise. This is exacerbated in stabilized laser systems where high-frequency phase noise is an unavoidable consequence of feedback. Here we implement an optical feedforward technique to suppress laser phase noise in the stimulated Raman adiabatic passage state transfer of ultracold RbCs molecules, across 114 THz, from a weakly bound Feshbach state to the rovibrational ground state. By performing over 100 state transfers on single molecules, we measure a significantly enhanced transfer efficiency of 98.7(1)% limited only by available laser intensity.

arXiv:2407.09119•Physical Review Letters•Dec 18, 2024•14 citations

Measuring the phase noise of Raman lasers with an atom-based method

Yaning Wang, Shuhua Yan, Dongyang Xu +9 more

Phase noise of Raman lasers is a major source of noise for a Raman-type cold atom interferometer, which is traditionally measured using the signal source analyzer. We report here an atom-based method to measure the phase noise performance between two Raman lasers. By analyzing and calibrating the system noise sources, we can characterize the contribution of phase noise from the total deviation of the relative atom population at the middle of the interference fringe. Knowing the transfer function specified by the operation sequence of the interferometer, we can obtain the transfer function and power spectrum density of the phase noise term. By varying the time sequences of the interferometer, we can measure the white phase noise floor and the phase noise performance over a large range of Fourier frequencies from 1 to 100 000 Hz with a minor difference of 1 dB compared with results from the traditional method using a signal analyzer, which proves the validity of the atom-based method. Compared with the traditional measurement method, the atom-based method can have higher accuracy and have the ability of self-calibrating.

Review of Scientific Instruments•Mar 1, 2021•4 citations
Lasers are the workhorse of quantum engineering in the atomic-molecular-optic community. However, phase noise of the laser, which can be especially large in popular semiconductor-based lasers, can limit gate fidelity. Here we present a fully fiberized instrument detecting and correcting the fast, submicrosecond, phase fluctuations of lasers. We demonstrate a measurement noise floor of less than 0.1 Hz2{\mathrm{Hz}}^{2}Hz2/Hz and a noise suppression of more than 20 dB for Fourier frequencies in the 1--10 MHz region (reaching up to 30 dB at 3 MHz), where noise is critical for Rydberg-based quantum gates. We observe the improvement offered by this fast-phase-noise eater on a Raman transition driven by two such stabilized lasers. These measurement and correction techniques are important tools for high-fidelity manipulation of the excited electronic states of atoms and molecules.
Lasers with high spectral purity are indispensable for optical clocks and for the coherent manipulation of atomic and molecular qubits in applications such as quantum computing and quantum simulation. While the stabilization of such lasers to a reference can provide a narrow linewidth, the widely used diode lasers exhibit fast phase noise that prevents high-fidelity qubit manipulation. In this paper, we demonstrate a self-injection locked diode laser system that utilizes a high-finesse cavity. This cavity not only provides a stable resonance frequency, it also acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40 Ca + -ion as a spectrum analyzer. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between −110 dBc/Hz and −120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates when using diode lasers in applications involving quantum logic spectroscopy, quantum simulation, and quantum computation.
The frequency noise of an external-cavity diode laser locked to an ultralow-expansion cavity (cavity-stabilized laser) and a whispering-gallery-mode (WGM) cavity optical-feedback semiconductor laser (WGM laser) was evaluated. The frequency noise of the WGM laser was approximately two orders of magnitude smaller than that of the cavity-stabilized laser at high Fourier frequencies. Using the WGM laser, phase noise reduction of approximately two orders of magnitude was observed in the dual-band stabilization of an optical-fiber-based interferometer at high Fourier frequencies. This noise reduction should improve the measurement fidelity in quantum key and entanglement distributions in long-distance quantum communication.
Interactions between atoms and lasers provide the potential for unprecedented control of quantum states. Fulfilling this potential requires detailed knowledge of frequency noise in optical oscillators with state-of-the-art stability. We demonstrate a technique that precisely measures the noise spectrum of an ultrastable laser using optical lattice-trapped 87Sr atoms as a quantum projection noise-limited reference. We determine the laser noise spectrum from near dc to 100 Hz via the measured fluctuations in atomic excitation, guided by a simple and robust theory model. The noise spectrum yields a 26(4) mHz linewidth at a central frequency of 429 THz, corresponding to an optical quality factor of 1.6×10(16). This approach improves upon optical heterodyne beats between two similar laser systems by providing information unique to a single laser and complements the traditionally used Allan deviation which evaluates laser performance at relatively long time scales. We use this technique to verify the reduction of resonant noise in our ultrastable laser via feedback from an optical heterodyne beat. Finally, we show that knowledge of our laser's spectrum allows us to accurately predict the laser-limited stability for optical atomic clocks.
Atom interferometry experiments rely on the ability to obtain a stable signal that corresponds to an atomic phase. For interferometers that use laser beams to manipulate the atoms, noise in the lasers can lead to errors in the atomic measurement. In particular, it is often necessary to actively stabilize the optical phase between two frequency components of the beams. Typically this is achieved using a time-domain measurement of a beat note between the two frequencies. This becomes challenging when the frequency difference is small and the phase measurement must be made quickly. The method presented here instead uses a spatial interference detection to rapidly measure the optical phase for arbitrary frequency differences. A feedback system operating at a bandwidth of about 10 MHz could then correct the phase in about 3 μs. This time is short enough that the phase correction could be applied at the start of a laser pulse without appreciably degrading the fidelity of the atom interferometer operation. The phase stabilization system was demonstrated in a simple atom interferometer measurement of the (87)Rb recoil frequency.
Many experimental platforms for quantum science depend on state control via laser fields. Frequently, however, the control fidelity is limited by optical phase noise. This is exacerbated in stabilized laser systems where high-frequency phase noise is an unavoidable consequence of feedback. Here we implement an optical feedforward technique to suppress laser phase noise in the stimulated Raman adiabatic passage state transfer of ultracold RbCs molecules, across 114 THz, from a weakly bound Feshbach state to the rovibrational ground state. By performing over 100 state transfers on single molecules, we measure a significantly enhanced transfer efficiency of 98.7(1)% limited only by available laser intensity.
Phase noise of Raman lasers is a major source of noise for a Raman-type cold atom interferometer, which is traditionally measured using the signal source analyzer. We report here an atom-based method to measure the phase noise performance between two Raman lasers. By analyzing and calibrating the system noise sources, we can characterize the contribution of phase noise from the total deviation of the relative atom population at the middle of the interference fringe. Knowing the transfer function specified by the operation sequence of the interferometer, we can obtain the transfer function and power spectrum density of the phase noise term. By varying the time sequences of the interferometer, we can measure the white phase noise floor and the phase noise performance over a large range of Fourier frequencies from 1 to 100 000 Hz with a minor difference of 1 dB compared with results from the traditional method using a signal analyzer, which proves the validity of the atom-based method. Compared with the traditional measurement method, the atom-based method can have higher accuracy and have the ability of self-calibrating.