Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2411.09637 · Physical Review A

Noise-adapted quantum error correction for non-Markovian noise

Debjyoti Biswas, Shrikant Utagi, Prabha Mandayam

Published May 8, 2025• 9 citations
arXivHTMLPDF

Abstract

We consider the problem of quantum error correction (QEC) for non-Markovian noise. Using the well-known Petz recovery map, we first show that conditions for approximate QEC can be easily generalized for the case of non-Markovian noise in the strong-coupling regime where the noise map becomes non-completely-positive at intermediate times. While certain approximate QEC schemes are ineffective against quantum non-Markovian noise, in the sense that the fidelity vanishes in finite time, the Petz map adapted to non-Markovian noise uniquely safeguards the code space even at the maximum noise limit. Focusing on the case of non-Markovian amplitude damping noise, we further show that the non-Markovian Petz map also outperforms the standard, stabilizer-based QEC code. Since implementing such a non-Markovian map poses practical challenges, we also construct a Markovian Petz map that achieves a similar performance, with only a slight compromise on the fidelity. Finally, we also study an example of non-Markovian Pauli noise, namely the non-Markovian dephasing channel. In this case, we show that the non-Markovian Petz recovery preserves the code space even at the high-noise limit for certain noise-adapted codes, whereas the Markovian Petz and stabilizer recoveries are ineffective.

DOI
10.1103/physreva.111.052413

Related papers

Noise-adapted qudit codes for amplitude-damping noise

Sourav Dutta, Debjyoti Biswas, Prabha Mandayam

Quantum error correction (QEC) plays a critical role in preventing information loss in quantum systems and provides a framework for reliable quantum computation. Identifying quantum codes with nice code parameters for physically motivated noise models remains an interesting challenge. While past work has primarily focused on qubit codes, here we identify a [4,1] qudit error correcting code tailored to protect against amplitude-damping noise. We show that this four-qudit code satisfies the error correction conditions for all single-qudit and a few two-qudit damping errors up to the leading order in the damping parameter $\ensuremath{\gamma}$. We devise a protocol to extract syndromes that unambiguously identify this set of errors, leading to a noise-adapted recovery scheme that achieves a fidelity loss of $O({\ensuremath{\gamma}}^{2})$. For the $d=2$ case, our QEC scheme is identical to the known example of the four-qubit code and the associated syndrome-based recovery. We also assess the performance of this code using the Petz recovery map and note some interesting deviations from the qubit case. Finally, we generalize this construction to a family of $[2M+2,M]$ qudit codes that can approximately correct all the single-qudit and a few two-qudit amplitude-damping errors.

arXiv:2406.02444•Physical Review A•Mar 31, 2025•13 citations

Quantum Codes for Generalized Amplitude-damping Noise

Sourav Dutta, Anubhab Rudra, Manav Seksaria +2 more

Quantum error correcting (QEC) plays a crucial role in protecting quantum information against decoherence and enabling scalable, reliable quantum computing. One of the most realistic and ubiquitous sources of noise affecting quantum hardware today is generalized amplitude-damping (GAD) noise. Conventional, deterministic QEC codes struggle to correct for GAD noise because of their inherent structure, leading to fidelity losses that scale linearly with the damping strength. In this work, we introduce the framework of probabilistic approximate quantum error correction (PAQEC), that combines the flexibility of approximate QEC with the potential of post-selected recovery, enabling high-fidelity, resource-efficient error correction. We construct a five-qubit permutation-invariant code that, under probabilistic recovery, achieves a fidelity loss quadratic in the damping strength, thus outperforming existing QEC codes. Formulating PAQEC as an optimization problem, we present a numerical technique based on Charnes-Cooper and semidefinite programming to identify the optimal recovery map for any PAQEC code. Our results establish PAQEC as a powerful tool for developing resource-efficient, high-fidelity quantum codes tailored to realistic noise, with promising implications for near-term quantum devices and future fault-tolerant architectures.

quant-pharXiv:2609.15924•Sep 15, 2026•0 citations

Noise-adapted recovery circuits for quantum error correction

Debjyoti Biswas, Gaurav M. Vaidya, Prabha Mandayam

Implementing quantum error correction (QEC) protocols is a challenging task in today's era of noisy intermediate-scale quantum devices. We present quantum circuits for a universal, noise-adapted recovery map, often referred to as the Petz map, which is known to achieve close-to-optimal fidelity for arbitrary codes and noise channels. While two of our circuit constructions draw upon algebraic techniques such as isometric extension and block encoding, the third approach breaks down the recovery map into a sequence of two-outcome POVMs. In each of the three cases we improve upon the resource requirements that currently exist in the literature. Apart from Petz recovery circuits, we also present circuits that can directly estimate the fidelity between the encoded state and the recovered state. As a concrete example of our circuit constructions, we implement Petz recovery circuits corresponding to a four-qubit code that is tailor-made to correct for amplitude-damping noise. The efficacy of our noise-adapted recovery circuits is then demonstrated through ideal and noisy simulations on the IBM QasmSimulator. Published by the American Physical Society 2024

arXiv:2305.11093•Physical Review Research•Oct 15, 2024•18 citations

Universal syndrome-based recovery for noise-adapted quantum error correction

Debjyoti Biswas, Prabha Mandayam

Quantum error correction (QEC) is an essential tool for quantum computing that enables reliable information processing in the presence of noise. Syndrome measurements play a central role in QEC, making it possible to unambiguously identify the location and type of errors. While syndrome extraction is natural for conventional QEC protocols, where the errors satisfy certain algebraic constraints \emph{perfectly}, this feature is largely missing in the framework of approximate or noise-adapted QEC. Rather, noise-adapted recovery maps like the Petz map are used in the latter scenario, but implementing such tailored recovery processes on the hardware can be quite challenging. Here, we address this issue by proposing an algorithmic approach to identifying error syndromes for arbitrary codes and noise processes. We then use our algorithm to develop a variant of the Petz recovery map -- a syndrome-based Petz recovery map -- which can then be implemented via syndrome measurements. We demonstrate the efficacy of our approach in the context of amplitude-damping noise, by constructing the syndrome-based Petz map for the $4$-qubit code. We execute our recovery circuits on IBM quantum hardware to successfully demonstrate break-even performance of a noise-adapted QEC protocol with upto a threefold improvement of the qubit $T_{1}$ times.

arXiv:2510.08719•Oct 9, 2025•3 citations

Towards a unified framework for approximate quantum error correction

Prabha Mandayam, Hui Khoon Ng

Recent work on approximate quantum error correction (QEC) has opened up the possibility of constructing subspace codes that protect information with high fidelity in scenarios where perfect error correction is impossible. Motivated by this, we investigate the problem of approximate subsystem codes. Subsystem codes extend the standard formalism of subspace QEC to codes in which only a subsystem within a subspace of states is used to store information in a noise-resilient fashion. Here, we demonstrate easily checkable sufficient conditions for the existence of approximate subsystem codes. Furthermore, for certain classes of subsystem codes and noise processes, we prove the efficacy of the transpose channel as a simple-to-construct recovery map that works nearly as well as the optimal recovery channel. This work generalizes our earlier approach [H. K. Ng and P. Mandayam, Phys. Rev. A 81, 062342 (2010)] of using the transpose channel for the approximate correction of subspace codes to the case of subsystem codes, and brings us closer to a unifying framework for approximate QEC.

arXiv:1202.5139•Physical Review A•Jul 27, 2012•40 citations

Demonstrating Noise-adapted Quantum Error Correction With Break-Even Performance

Vismay Joshi, Anubhab Rudra, Sourav Dutta +2 more

The promise of quantum computing is closer to reality today than ever before, thanks to rapid progress in the development of quantum hardware. Even as qubit lifetimes and gate fidelities continue to improve, realizing robust, fault-tolerant quantum computers is contingent upon the successful implementation of quantum error correction (QEC). Conventional QEC schemes have rather high resource overheads and low threshold requirements, making them challenging to implement on present day hardware. Here, we use a recently developed noise-adapted 3-qubit QEC scheme to demonstrate break-even performance against native amplitude-damping (AD) noise on IBM quantum hardware. We use variational quantum circuits to construct hardware-efficient encoding and decoding circuits. This scheme is probabilistic due to the non-unitary nature of the recovery operators, which are implemented via the block-encoding technique. We demonstrate logical qubit lifetimes exceeding those of the physical qubits by performing multiple rounds of QEC. To further protect the qubits from dephasing due to crosstalk, we incorporate dynamical decoupling into our noise-adapted QEC scheme in a seamless fashion. To account for the post-selection overhead, we define a measure of gain, that allows for faithful performance benchmarking of the protocol. Our analysis suggests that the performance of our protocol is limited primarily by the measurement readout fidelity, and is bound to improve with successive generations of quantum processors.

quant-pharXiv:2603.04564•Mar 6, 2026•3 citations
We consider the problem of quantum error correction (QEC) for non-Markovian noise. Using the well-known Petz recovery map, we first show that conditions for approximate QEC can be easily generalized for the case of non-Markovian noise in the strong-coupling regime where the noise map becomes non-completely-positive at intermediate times. While certain approximate QEC schemes are ineffective against quantum non-Markovian noise, in the sense that the fidelity vanishes in finite time, the Petz map adapted to non-Markovian noise uniquely safeguards the code space even at the maximum noise limit. Focusing on the case of non-Markovian amplitude damping noise, we further show that the non-Markovian Petz map also outperforms the standard, stabilizer-based QEC code. Since implementing such a non-Markovian map poses practical challenges, we also construct a Markovian Petz map that achieves a similar performance, with only a slight compromise on the fidelity. Finally, we also study an example of non-Markovian Pauli noise, namely the non-Markovian dephasing channel. In this case, we show that the non-Markovian Petz recovery preserves the code space even at the high-noise limit for certain noise-adapted codes, whereas the Markovian Petz and stabilizer recoveries are ineffective.
Quantum error correction (QEC) plays a critical role in preventing information loss in quantum systems and provides a framework for reliable quantum computation. Identifying quantum codes with nice code parameters for physically motivated noise models remains an interesting challenge. While past work has primarily focused on qubit codes, here we identify a [4,1] qudit error correcting code tailored to protect against amplitude-damping noise. We show that this four-qudit code satisfies the error correction conditions for all single-qudit and a few two-qudit damping errors up to the leading order in the damping parameter $\ensuremath{\gamma}$. We devise a protocol to extract syndromes that unambiguously identify this set of errors, leading to a noise-adapted recovery scheme that achieves a fidelity loss of $O({\ensuremath{\gamma}}^{2})$. For the d=2d=2d=2 case, our QEC scheme is identical to the known example of the four-qubit code and the associated syndrome-based recovery. We also assess the performance of this code using the Petz recovery map and note some interesting deviations from the qubit case. Finally, we generalize this construction to a family of [2M+2,M][2M+2,M][2M+2,M] qudit codes that can approximately correct all the single-qudit and a few two-qudit amplitude-damping errors.
Quantum error correcting (QEC) plays a crucial role in protecting quantum information against decoherence and enabling scalable, reliable quantum computing. One of the most realistic and ubiquitous sources of noise affecting quantum hardware today is generalized amplitude-damping (GAD) noise. Conventional, deterministic QEC codes struggle to correct for GAD noise because of their inherent structure, leading to fidelity losses that scale linearly with the damping strength. In this work, we introduce the framework of probabilistic approximate quantum error correction (PAQEC), that combines the flexibility of approximate QEC with the potential of post-selected recovery, enabling high-fidelity, resource-efficient error correction. We construct a five-qubit permutation-invariant code that, under probabilistic recovery, achieves a fidelity loss quadratic in the damping strength, thus outperforming existing QEC codes. Formulating PAQEC as an optimization problem, we present a numerical technique based on Charnes-Cooper and semidefinite programming to identify the optimal recovery map for any PAQEC code. Our results establish PAQEC as a powerful tool for developing resource-efficient, high-fidelity quantum codes tailored to realistic noise, with promising implications for near-term quantum devices and future fault-tolerant architectures.
Implementing quantum error correction (QEC) protocols is a challenging task in today's era of noisy intermediate-scale quantum devices. We present quantum circuits for a universal, noise-adapted recovery map, often referred to as the Petz map, which is known to achieve close-to-optimal fidelity for arbitrary codes and noise channels. While two of our circuit constructions draw upon algebraic techniques such as isometric extension and block encoding, the third approach breaks down the recovery map into a sequence of two-outcome POVMs. In each of the three cases we improve upon the resource requirements that currently exist in the literature. Apart from Petz recovery circuits, we also present circuits that can directly estimate the fidelity between the encoded state and the recovered state. As a concrete example of our circuit constructions, we implement Petz recovery circuits corresponding to a four-qubit code that is tailor-made to correct for amplitude-damping noise. The efficacy of our noise-adapted recovery circuits is then demonstrated through ideal and noisy simulations on the IBM QasmSimulator. Published by the American Physical Society 2024
Quantum error correction (QEC) is an essential tool for quantum computing that enables reliable information processing in the presence of noise. Syndrome measurements play a central role in QEC, making it possible to unambiguously identify the location and type of errors. While syndrome extraction is natural for conventional QEC protocols, where the errors satisfy certain algebraic constraints \emph{perfectly}, this feature is largely missing in the framework of approximate or noise-adapted QEC. Rather, noise-adapted recovery maps like the Petz map are used in the latter scenario, but implementing such tailored recovery processes on the hardware can be quite challenging. Here, we address this issue by proposing an algorithmic approach to identifying error syndromes for arbitrary codes and noise processes. We then use our algorithm to develop a variant of the Petz recovery map -- a syndrome-based Petz recovery map -- which can then be implemented via syndrome measurements. We demonstrate the efficacy of our approach in the context of amplitude-damping noise, by constructing the syndrome-based Petz map for the 444-qubit code. We execute our recovery circuits on IBM quantum hardware to successfully demonstrate break-even performance of a noise-adapted QEC protocol with upto a threefold improvement of the qubit T1T_{1}T1​ times.
Recent work on approximate quantum error correction (QEC) has opened up the possibility of constructing subspace codes that protect information with high fidelity in scenarios where perfect error correction is impossible. Motivated by this, we investigate the problem of approximate subsystem codes. Subsystem codes extend the standard formalism of subspace QEC to codes in which only a subsystem within a subspace of states is used to store information in a noise-resilient fashion. Here, we demonstrate easily checkable sufficient conditions for the existence of approximate subsystem codes. Furthermore, for certain classes of subsystem codes and noise processes, we prove the efficacy of the transpose channel as a simple-to-construct recovery map that works nearly as well as the optimal recovery channel. This work generalizes our earlier approach [H. K. Ng and P. Mandayam, Phys. Rev. A 81, 062342 (2010)] of using the transpose channel for the approximate correction of subspace codes to the case of subsystem codes, and brings us closer to a unifying framework for approximate QEC.
The promise of quantum computing is closer to reality today than ever before, thanks to rapid progress in the development of quantum hardware. Even as qubit lifetimes and gate fidelities continue to improve, realizing robust, fault-tolerant quantum computers is contingent upon the successful implementation of quantum error correction (QEC). Conventional QEC schemes have rather high resource overheads and low threshold requirements, making them challenging to implement on present day hardware. Here, we use a recently developed noise-adapted 3-qubit QEC scheme to demonstrate break-even performance against native amplitude-damping (AD) noise on IBM quantum hardware. We use variational quantum circuits to construct hardware-efficient encoding and decoding circuits. This scheme is probabilistic due to the non-unitary nature of the recovery operators, which are implemented via the block-encoding technique. We demonstrate logical qubit lifetimes exceeding those of the physical qubits by performing multiple rounds of QEC. To further protect the qubits from dephasing due to crosstalk, we incorporate dynamical decoupling into our noise-adapted QEC scheme in a seamless fashion. To account for the post-selection overhead, we define a measure of gain, that allows for faithful performance benchmarking of the protocol. Our analysis suggests that the performance of our protocol is limited primarily by the measurement readout fidelity, and is bound to improve with successive generations of quantum processors.