Researchers and industries are increasingly drawn to quantum computing for its computational potential. However, validating new quantum algorithms is challenging due to the limitations of current quantum devices. Software simulators are time and memory-consuming, making hardware emulators an attractive alternative. This article introduces AMARETTO (quAntuM ARchitecture EmulaTion TechnOlogy), designed for quantum computing emulation on low-tier Field-Programmable gate arrays (FPGAs), supporting Clifford+T and rotational gate sets. It simplifies and accelerates the verification of quantum algorithms using a Reduced-Instruction-Set-Computer (RISC)-like structure and efficient handling of sparse quantum gates. A dedicated compiler translates OpenQASM 2.0 into RISC-like instructions. AMARETTO is validated against the Qiskit simulators. Our results show successful emulation of sixteen qubits on a AMD Kria KV260 SoM. This approach rivals other works in emulated qubit capacity on a smaller, more affordable FPGA.
Researchers and industries are increasingly drawn to quantum computing for its computational potential. However, validating new quantum algorithms is challenging due to the limitations of current quantum devices. Software simulators are time and memory-consuming, making hardware emulators an attractive alternative. This article introduces AMARETTO (quAntuM ARchitecture EmulaTion TechnOlogy), designed for quantum computing emulation on low-tier Field-Programmable gate arrays (FPGAs), supporting Clifford+T and rotational gate sets. It simplifies and accelerates the verification of quantum algorithms using a Reduced-Instruction-Set-Computer (RISC)-like structure and efficient handling of sparse quantum gates. A dedicated compiler translates OpenQASM 2.0 into RISC-like instructions. AMARETTO is validated against the Qiskit simulators. Our results show successful emulation of sixteen qubits on a AMD Kria KV260 SoM. This approach rivals other works in emulated qubit capacity on a smaller, more affordable FPGA.
In recent decades, Quantum Computing (QC) has gained widespread attention among researchers and industries, driven by its potential to outperform classical systems in several key areas. However, validating novel quantum algorithms poses substantial challenges due to limited qubit availability and noise in current quantum devices. Although software simulators are frequently employed to validate quantum circuits, they are time-consuming and require high memory availability since as the number of qubits increases, the memory occupation grows exponentially. Hardware emulators have recently emerged as a faster, more efficient, cost-effective alternative. This article introduces AMARETTO (quAntuM ARchitecture EmulaTion TechnOlogy), a new architecture designed to improve quantum computing emulation on resource-constrained Field-Programmable Gate Arrays (FPGAs). To provide a flexible and complete tool for quantum algorithm development, the emulator supports two universal gate sets, Clifford+T and rotational. AMARETTO mimics quantum computing’s inherent parallelism through multiple concurrent processing elements, achieving high throughput by harnessing the sparse nature of the gate matrices, coupled with pipelining in a Reduced Instruction Set Computer (RISC)-like architecture. A dedicated compiler translates OpenQASM 2.0 into AMARETTO’s instructions, enabling support for custom gates leveraging the equivalences known in the literature. Experimental results on an AMD Zynq UltraScale+ MPSoC ZCU106 demonstrate successful emulation of quantum circuits up to eighteen qubits with a throughput of12.207skgates, validated against Qiskit simulators. Our evaluation confirms competitive performance with existing FPGA-based emulators in terms of throughput and scalability, while targeting an affordable FPGA platform.
Researchers and industries are increasingly drawn to quantum computing for its computational potential. However, validating new quantum algorithms is challenging due to current quantum device limitations. Software simulators are time and memory-intensive, making hardware emulators an attractive alternative. This article introduces a digital architecture, designed to emulate quantum computing on low-tier Field-Programmable Gate Arrays (FPGAs), supporting Clifford+T and rotational gate sets. It simplifies and accelerates quantum algorithm verification using a RISC-like structure and efficiently handling sparse quantum gates. A dedicated compiler translates OpenQASM 2.0 into RISC-like instructions. The architecture is validated against the Qiskit state vector simulator, successfully emulating sixteen qubits on a Xilinx Kria KV260 SoM.
This work presents AEQUAM (Area Efficient QUAntum eMulation), a toolchain that enables faster and more accessible quantum circuit verification. It consists of a compiler that translates OpenQASM 2.0 into RISC-like instructions, Cython software models for selecting number representations and simulating circuits, and a VHDL generator that produces RTL descriptions for FPGA-based hardware emulators. The architecture leverages a SIMD approach to parallelize computation and reduces complexity by exploiting the sparsity of quantum gate matrices. The VHDL generator allows customization of the number of emulated qubits and parallelization levels to meet user requirements. Synthesized on an Altera Cyclone 10LP FPGA with a 20-bit fixed-point representation and nearest-type approximation, the architecture demonstrates better scalability than other state-of-the-art emulators. Specifically, the emulator has been validated by exploiting the well consolidated benchmark of mqt bench framework.
Quantum computing leverages quantum mechanics to perform complex computations efficiently, yet its practical implementation is hindered by hardware-software interdependence and quantum state instability. This paper advances lightweight FPGA-based quantum emulation by incorporating a universal quantum gate set, including parameterized Phase gates and the CNOT gate, to support comprehensive quantum protocol emulation on FPGA hardware. The FPGA platform used for synthesis is Atrix 7. The proposed emulator is validated through simulations of quantum circuits, including Bell States, the Deutsch algorithm, Superdense coding, Grover’s search, and BB84 QKD, with results benchmarked against IBM’s noiseless quantum simulator. Utilizing FPGA’s customizable parallelism and energy efficiency, this framework offers a resource-efficient, reliable platform for developing and testing quantum algorithms.
Quantum computing (QC) emulation is critical for exploring and advancing near-term quantum algorithms, given the ongoing scalability and reliability challenges of quantum hardware. While FPGA-based QC emulators have emerged as efficient alternatives to bridge the gap toward practical quantum computers, most existing solutions depend on high-performance systems, limiting their applicability in embedded and edge environments. In this work, we present a scalable, standalone FPGA-based emulator specialized for resource-constrained systems. Our design targets the Quantum Approximate Optimization Algorithm (QAOA), particularly for the Weighted-MaxCut problem. By leveraging diagonal decomposition and a pipeline-centric hardware architecture, we reduce the computational complexity of QAOA fromO(N2)toO(N), whereN=2nis the state dimension fornqubits. This reformulation and its architectural co-design significantly reduces hardware overhead, enabling larger qubit configurations on edge-level FPGAs. We encapsulate these optimizations into a hardware accelerator called theQuantum MaxCut Accelerator(QMA), which integrates seamlessly into a RISC-V platform, forming a self-contained emulator. Additionally, we introduceQC Emulator eXpress(QEX), a full-stack automation framework that streamlines QMA integration into configurable RISC-V platforms, significantly facilitating rapid and scalable emulator development and deployment. Through extensive prototyping of various QAOA emulators, our experiments confirm that the proposed QMA achieves energy reductions of up to907×compared to the CPU-only software baseline under the same standalone FPGA/RISC-V setting and reliably supports up to 9 qubits on a mid-tier FPGA. These results demonstrate the energy efficiency and scalability of the proposed system as a self-contained FPGA/RISC-V platform for edge-local QAOA emulation, prototyping, and HW/SW co-design exploration under resource-constrained conditions.
Quantum computing leverages quantum mechanics to perform complex computations efficiently, yet its practical implementation is hindered by hardware-software interdependence and quantum state instability. This paper advances lightweight FPGA-based quantum emulation by incorporating a universal quantum gate set, including parameterized Phase gates and the CNOT gate, to support comprehensive quantum protocol emulation on FPGA hardware. The FPGA platform used for synthesis is Atrix 7. The proposed emulator is validated through simulations of quantum circuits, including Bell States, the Deutsch algorithm, Superdense coding, Grover’s search, and BB84 QKD, with results benchmarked against IBM’s noiseless quantum simulator. Utilizing FPGA’s customizable parallelism and energy efficiency, this framework offers a resource-efficient, reliable platform for developing and testing quantum algorithms.