Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2411.08670 · IEEE Transactions on Quantum Engineering

RSFQ All-Digital Programmable Multitone Generator for Quantum Applications

João Barbosa, Jack C. Brennan, A. Casaburi, Matthew Hutchings, Alex F. Kirichenko, Oleg A. Mukhanov, Martin P. Weides

Published Jan 1, 2025• 8 citations
arXivHTMLPDF

Abstract

One of the most important and topical challenges of quantum circuits is their scalability. Rapid single flux quantum (RSFQ) technology is at the forefront of replacing current standard CMOS-based control architectures for a number of applications, including quantum computing and quantum sensor arrays. By condensing the control and readout to single-flux-quantum-based on-chip devices that are directly connected to the quantum systems, it is possible to minimize the total system overhead, improving scalability and integration. In this article, we present a novel RSFQ device that generates multitone digital signals, based on complex pulse train sequences using a circular shift register (CSR) and a comb filter stage. We show that the frequency spectrum of the pulse trains is dependent on a preloaded pattern on the CSR, as well as on the delay line of the comb filter stage. By carefully selecting both the pattern and delay, the desired tones can be isolated and amplified as required. Finally, we propose architectures where this device can be implemented to control and read out arrays of quantum devices, such as qubits and single-photon detectors.

DOI
10.1109/tqe.2024.3520805

Related papers

New design of single-bit all-digital RSFQ autocorrelator

Alexander V. Rylyakov

We present a new design of a Rapid Single-Flux-Quantum (RSFQ) all-digital one-bit autocorrelator for submillimeter spectrometry applications, featuring 4 GHz input signal bandwidth, double oversampling quantizer, and 16 Mbps-per-channel output rate. The delay line of the autocorrelator is based on a circular shift register with XOR gates performing multiplication of the delayed and undelayed single-bit signals at every stage. The multiplication results are accumulated by room-temperature electronics after being prescaled in on-chip binary counters consisting of 10 T flip-flops per stage. We report results of experimental testing of a 16-stage autocorrelator delay line with multiplication and for a linear array of 8 low-power T flip-flop binary counters, all fabricated in HYPRES' standard 3.5 /spl mu/m 1000 A/cm/sup 2/ Nb-trilayer process. We also discuss physical and technical limits of the minimal power dissipation in RSFQ circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•43 citations

Recent Progress in Rapid-Single-Flux-Quantum Circuits

Akira Fujimaki, Takahiro Yamada, Masamitsu Tanaka +4 more

We describe recent topics of rapid-single-flux-quantum (RSFQ) circuits. Much higher integration and higher-speed operation are required for commercializing the RSFQ circuits in any application. To satisfy this requirement, we measure several kinds of time fluctuations that possibly limit the integration level and operating speed, and introduce the flexible passive transmission line technology including a multicasting transmitter. In addition, we describe our ongoing applications. A multiple-detectors-system is expected to open a new application field of an RSFQ-based analog-to-digital converter and a digital signal processor. As for a microprocessor application, increased number of arithmetic logic units may be effective for enhancing the computing performances.

Advances in science and technology•Oct 1, 2006•1 citation

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

SFQ-Driven Pulse-Phase Sequence Generator for Superconducting Qubit Control

Meriam Gay Bautista, Patricia Gonzalez-Guerrero, Anastasiia Butko

The convergence of quantum computing and high-performance computing (HPC) necessitates innovative approaches to qubit control and coherence for scalable quantum systems. In this work, we explore the integration of superconducting Single-Flux Quantum (SFQ) digital circuits to enhance quantum state manipulation, leveraging their potential for high-speed, energy-efficient classical control. Our approach maps SFQ pulse trains and configurable SFQ-based switches to discrete phase shifts, enabling efficient qubit state transformations with minimal decoherence overhead. We introduce a classically driven SFQ-based quantum gate implementation, where SFQ pulses orchestrate the state evolution of qubits. To support dynamic and flexible qubit control within hybrid quantum-HPC architectures, we design and implement a multi-frequency SFQ pulse generator, capable of generating tailored pulse sequences that seamlessly interface with SQUID-based resonator-qubit cavities. This work demonstrates a promising path toward integrating quantum accelerators with classical HPC infrastructure, opti-mizing quantum-classical workflows, and enabling scalable, high-performance quantum computation.

IEEE International Symposium on Parallel & Distributed Processing, Workshops and Phd Forum•Jun 3, 2025•1 citation

Single flux quantum digital devices

V. P. Koshelets

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

Superconductor Science and Technology•Nov 1, 1991•5 citations

Superconductor Digital Signal Processor

Irina Kataeva

Superconductor digital technology based on Rapid Single Flux Quantum logic (RSFQ) offers more than 50 times gain in speed and more than 100 reduction in power consumption over mainstream CMOS devices. However, the necessity of cooling down to 4 K and modest degree of integration density currently available mean that employing RSFQ is reasonable only for the tasks that are impossible or ineffective to implement in CMOS technology. One of the promising applications of the RSFQ technology is Digital Signal Processing (DSP) for telecommunications. Interference cancellation is a bottleneck for all existing systems in terms of the performance gain that is theoretically possible and technically realizable using conventional technology. The crucial factor is computational complexity required to handle multiple access interference. The general approach is to compute the interference using available data about propagation channels and then either remove it from received signal or use to predistort the transmitted signal. Computation of the interference matrix can easily fall into 100 Gops range, furthermore, the most e±cient algorithms are based on successive iterations. This requires not only high overall performance of the DSP but also high actual clock rate.This thesis reports a proposed architecture of an RSFQ Successive Interference Canceller and a design of an RSFQ Digital Signal Processor based on hybrid RSFQ-CMOS memory suitable for a general matrix on matrix multiplication algorithm. The processor consists of an RSFQ Multiply-Accumulate Unit, memory caches and a synchronization block, partitioned into multiple chips, and a large CMOS memory.The complexity of the RSFQ DSP is 10x10 multiplication, rounding to 14 bits, 18 bits accumulator length and 3.7 Kb memory cache. In order to implement the RSFQ DSP, we have developed approach to simulate and describe the RSFQ circuits using VHDL. The maximum simulated clock frequency is equal to 24 GHz for Hypres 4.5 kA/cm2 process and optimum communication bandwidth with CMOS memory is 2 Gbps.Components of the processor such as 4x4 two's complement and 5x5 parallel multipliers, 4x5, 20x5 and 4x15 parallel shift registers, a 5-bit serial adder have been designed and experimentally tested. The simplified version of the RSFQ DSP consisting of a 4x4 MAC with rounding to 5 bits and 17x6 memory caches has been designed for Hypres 4.5 kA/cm2 process and fabricated.

•Jan 1, 2007•0 citations
One of the most important and topical challenges of quantum circuits is their scalability. Rapid single flux quantum (RSFQ) technology is at the forefront of replacing current standard CMOS-based control architectures for a number of applications, including quantum computing and quantum sensor arrays. By condensing the control and readout to single-flux-quantum-based on-chip devices that are directly connected to the quantum systems, it is possible to minimize the total system overhead, improving scalability and integration. In this article, we present a novel RSFQ device that generates multitone digital signals, based on complex pulse train sequences using a circular shift register (CSR) and a comb filter stage. We show that the frequency spectrum of the pulse trains is dependent on a preloaded pattern on the CSR, as well as on the delay line of the comb filter stage. By carefully selecting both the pattern and delay, the desired tones can be isolated and amplified as required. Finally, we propose architectures where this device can be implemented to control and read out arrays of quantum devices, such as qubits and single-photon detectors.
We present a new design of a Rapid Single-Flux-Quantum (RSFQ) all-digital one-bit autocorrelator for submillimeter spectrometry applications, featuring 4 GHz input signal bandwidth, double oversampling quantizer, and 16 Mbps-per-channel output rate. The delay line of the autocorrelator is based on a circular shift register with XOR gates performing multiplication of the delayed and undelayed single-bit signals at every stage. The multiplication results are accumulated by room-temperature electronics after being prescaled in on-chip binary counters consisting of 10 T flip-flops per stage. We report results of experimental testing of a 16-stage autocorrelator delay line with multiplication and for a linear array of 8 low-power T flip-flop binary counters, all fabricated in HYPRES' standard 3.5 /spl mu/m 1000 A/cm/sup 2/ Nb-trilayer process. We also discuss physical and technical limits of the minimal power dissipation in RSFQ circuits.
We describe recent topics of rapid-single-flux-quantum (RSFQ) circuits. Much higher integration and higher-speed operation are required for commercializing the RSFQ circuits in any application. To satisfy this requirement, we measure several kinds of time fluctuations that possibly limit the integration level and operating speed, and introduce the flexible passive transmission line technology including a multicasting transmitter. In addition, we describe our ongoing applications. A multiple-detectors-system is expected to open a new application field of an RSFQ-based analog-to-digital converter and a digital signal processor. As for a microprocessor application, increased number of arithmetic logic units may be effective for enhancing the computing performances.
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
The convergence of quantum computing and high-performance computing (HPC) necessitates innovative approaches to qubit control and coherence for scalable quantum systems. In this work, we explore the integration of superconducting Single-Flux Quantum (SFQ) digital circuits to enhance quantum state manipulation, leveraging their potential for high-speed, energy-efficient classical control. Our approach maps SFQ pulse trains and configurable SFQ-based switches to discrete phase shifts, enabling efficient qubit state transformations with minimal decoherence overhead. We introduce a classically driven SFQ-based quantum gate implementation, where SFQ pulses orchestrate the state evolution of qubits. To support dynamic and flexible qubit control within hybrid quantum-HPC architectures, we design and implement a multi-frequency SFQ pulse generator, capable of generating tailored pulse sequences that seamlessly interface with SQUID-based resonator-qubit cavities. This work demonstrates a promising path toward integrating quantum accelerators with classical HPC infrastructure, opti-mizing quantum-classical workflows, and enabling scalable, high-performance quantum computation.
A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.
Superconductor digital technology based on Rapid Single Flux Quantum logic (RSFQ) offers more than 50 times gain in speed and more than 100 reduction in power consumption over mainstream CMOS devices. However, the necessity of cooling down to 4 K and modest degree of integration density currently available mean that employing RSFQ is reasonable only for the tasks that are impossible or ineffective to implement in CMOS technology. One of the promising applications of the RSFQ technology is Digital Signal Processing (DSP) for telecommunications. Interference cancellation is a bottleneck for all existing systems in terms of the performance gain that is theoretically possible and technically realizable using conventional technology. The crucial factor is computational complexity required to handle multiple access interference. The general approach is to compute the interference using available data about propagation channels and then either remove it from received signal or use to predistort the transmitted signal. Computation of the interference matrix can easily fall into 100 Gops range, furthermore, the most e±cient algorithms are based on successive iterations. This requires not only high overall performance of the DSP but also high actual clock rate.This thesis reports a proposed architecture of an RSFQ Successive Interference Canceller and a design of an RSFQ Digital Signal Processor based on hybrid RSFQ-CMOS memory suitable for a general matrix on matrix multiplication algorithm. The processor consists of an RSFQ Multiply-Accumulate Unit, memory caches and a synchronization block, partitioned into multiple chips, and a large CMOS memory.The complexity of the RSFQ DSP is 10x10 multiplication, rounding to 14 bits, 18 bits accumulator length and 3.7 Kb memory cache. In order to implement the RSFQ DSP, we have developed approach to simulate and describe the RSFQ circuits using VHDL. The maximum simulated clock frequency is equal to 24 GHz for Hypres 4.5 kA/cm2 process and optimum communication bandwidth with CMOS memory is 2 Gbps.Components of the processor such as 4x4 two's complement and 5x5 parallel multipliers, 4x5, 20x5 and 4x15 parallel shift registers, a 5-bit serial adder have been designed and experimentally tested. The simplified version of the RSFQ DSP consisting of a 4x4 MAC with rounding to 5 bits and 17x6 memory caches has been designed for Hypres 4.5 kA/cm2 process and fabricated.