Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2411.04122 · Reports on Progress in Physics

Quantum metrology with a continuous-variable system

Matteo Fadel, Noah Roux, Manuel Gessner

Published Aug 29, 2025• 32 citations
arXivHTMLPDF

Abstract

As one of the main pillars of quantum technologies, quantum metrology aims to improve measurement precision using techniques from quantum information. The two main strategies to achieve this are the preparation of nonclassical states and the design of optimized measurement observables. We discuss precision limits and optimal strategies in quantum metrology and sensing with a single mode of quantum continuous variables. We focus on the practically most relevant cases of estimating displacements and rotations and provide the sensitivities of the most important classes of states that includes Gaussian states and superpositions of Fock states or coherent states. Fundamental precision limits that are obtained from the quantum Fisher information are compared to the precision of a simple moment-based estimation strategy based on the data obtained from possibly sub-optimal measurement observables, including homodyne, photon number, parity and higher moments. Finally, we summarize some of the main experimental achievements and present emerging platforms for continuous-variable sensing. These results are of particular interest for experiments with quantum light, trapped ions, mechanical oscillators, and microwave resonators.

DOI
10.1088/1361-6633/ae00d8

Related papers

Metrological Sensitivity beyond Gaussian Limits with Cubic Phase States

Jiajie Guo, Shuheng Liu, Boxuan Jing +2 more

Cubic phase states provide the essential non-Gaussian resource for continuous-variable quantum computing. We show that they also offer significant potential for quantum metrology, surpassing the phase-sensing sensitivity of all Gaussian states at equal average photon number. Optimal sensitivity requires only moderate initial squeezing, and the non-Gaussian advantage remains robust against loss and detection noise. We identify optimal measurement strategies and show that several experimentally relevant preparation schemes surpass Gaussian limits, in some cases reaching the sensitivity of cubic phase states. Our results establish cubic phase states as a promising resource for quantum-enhanced precision measurements beyond Gaussian limits.

quant-pharXiv:2512.03769•Dec 4, 2025•7 citations

Advances in multiparameter quantum sensing and metrology

Luca Pezzè, Augusto Smerzi

Recent years have witnessed a growing interest in understating the limitations imposed by quantum noise in precision measurements and devising techniques to reduce it. The attention is currently turning to the simultaneously estimation of several parameters of interest, driven by its promising potential across a wide range of sensing applications as well as fueled by experimental progress in various optical and atomic platforms. Here, we provide a comprehensive overview of key research directions in multiparameter quantum sensing and metrology, highlighting both opportunities and challenges. We introduce the basic framework, discuss ultimate sensitivity bounds, optimal measurement strategies, and the role of quantum incompatibility, showing important differences with respect to single-parameter estimation. Additionally, we discuss emerging experimental implementations in distributed quantum sensing, including cutting-edge optimization techniques. This review aims to bridge the gap between theory and experiments, paving the way for the next-generation of quantum sensors and their integration with other quantum technologies.

arXiv:2502.17396•Feb 24, 2025•31 citations

Quantum accuracy limits and benchmarks in continuous variable systems

Mariona Aspachs

In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.

•Jan 1, 2011•0 citations

Towards practical quantum metrology

Rosanna Nichols

This thesis aims to help in bridging the gap between the ideals of theoretical quantum metrology and its practical application. We take three major approaches to achieving this aim: to investigate the effect of noise on metrological schemes, to study the role of resources and to devise ways to engineer effective probe states from experimentally feasible elements. We find that noise is detrimental to measurement precision but that this may be overcome by thinking outside of the asymptotic regime. Considering resources, whilst entanglement may provide an advantage, it is only useful in limited circumstances and even in this case a very small entangled state may perform as well as a large one. This is also true in multiparameter metrology, where we find that it is possible for the simultaneous estimation of phase and noise to be advantageous, even when the parameters are not fully compatible. We discuss strategies for multiparameter estimation in both discrete and continuous variable formalisms. In the continuous variable formalism, we go beyond the consideration of entanglement as a resource and construct a generalised resource theory for Gaussian states and operations which has particular cases in entanglement, steerability and squeezing. We provide a measure for this resource as well as a no-go theorem for its distillation. Finally, we use a genetic algorithm to devise state engineering schemes to produce highly sensitive states for quantum metrology.

•Jul 18, 2019•0 citations

Precision of Parameter Estimation in Quantum Metrology

Chenglong You

The fundamental precision limit of an interferometer is crucial since it bounds the best possible sensitivity one could achieve using such a device. This thesis will focus on several different interferometers and try to give the ultimate precision bounds by carefully counting all the resources used in the interferometers. The thesis begins with the basics of the quantum state of light. The fundamentals of quantum metrology are also reviewed and discussed. More specifically, the terminology of classical and quantum Cram\'er-Rao bound and classical and quantum Fisher information are introduced. Chapter 3 discusses the conclusive precision bounds in two-mode interferometer such as Mach-Zehnder interferometer (MZI) and SU(1,1) interferometer. I revisit the quantum Fisher information approach of these two interferometers and show the discrepancy of phase sensitivity on the physically same setup. Then I establish fundamental precision estimation bounds for such device, due to the reason that many works of literature fail to accurately count the resources and knowledge of phase-to-be-estimated used in the interferometers. The analysis suggests that for a MZI, one can never do better than SNL in phase sensitivity, when an input to one of the two ports is the vacuum. If one does not allow the detector to use any external phase reference or power resource, then the precision is limited by the SNL. For a SU(1,1) interferometer, firstly, when one of the input states is restricted to be a vacuum state, I showed that by using either the phase-averaging method or the quantum Fisher information matrix method, different phase configurations of the SU(1,1) interferometer result in the same QFI. Secondly, I compared the results of the phase-averaging method and the quantum Fisher information matrix method, and then I argued that for an SU(1,1) interferometer, phase averaging or quantum Fisher information matrix method is generally required, and they are equivalent. Finally, I used the quantum Fisher information matrix method to calculate the precision limit for other common input states, such as two coherent state inputs or coherent state with squeezed vacuum inputs. In chapter 4, I will consider a passive multi-mode interferometer for multiparameter phase estimation. It was suggested that optical networks with relatively inexpensive overhead---single photon Fock states, passive optical elements, and single photon detection---can show significant improvements over classical strategies for single-parameter estimation, when the number of modes in the network is small. In this chapter, I analytically compute the quantum Cramer-Rao bound to show these

Civil War Book Review•Mar 18, 2019•0 citations

Journey in quantum metrology and sensing from foundations to applications: a review

Priya Ghosh, Tanoy Kanti Konar, Debraj Rakshit +2 more

We present a review on quantum metrology and sensing, from its foundations to current applications. Highlights of the review include consideration of both frequentist and Bayesian approaches to parameter estimation; single as well as multiparameter estimation; estimation for different encoding processes comprising unitary as well as noisy channels, quantum thermometry, and channels involving indefinite causal order; different estimation strategies incorporating also recent advances like quantum error correction-aided methods and reservoir engineering; usefulness of quantum Fisher information to detect resources; applications of quantum metrology in diverse arenas covering quantum many-body sensors, sensing protocols in atomic ensembles, atom-photon systems, and continuous-variable systems, quantum imaging, quantum illumination, atomic clocks and atom interferometry, etc; and experimental realizations of quantum sensors in different physical platforms.

quant-pharXiv:2605.21702•May 22, 2026•12 citations
As one of the main pillars of quantum technologies, quantum metrology aims to improve measurement precision using techniques from quantum information. The two main strategies to achieve this are the preparation of nonclassical states and the design of optimized measurement observables. We discuss precision limits and optimal strategies in quantum metrology and sensing with a single mode of quantum continuous variables. We focus on the practically most relevant cases of estimating displacements and rotations and provide the sensitivities of the most important classes of states that includes Gaussian states and superpositions of Fock states or coherent states. Fundamental precision limits that are obtained from the quantum Fisher information are compared to the precision of a simple moment-based estimation strategy based on the data obtained from possibly sub-optimal measurement observables, including homodyne, photon number, parity and higher moments. Finally, we summarize some of the main experimental achievements and present emerging platforms for continuous-variable sensing. These results are of particular interest for experiments with quantum light, trapped ions, mechanical oscillators, and microwave resonators.
Cubic phase states provide the essential non-Gaussian resource for continuous-variable quantum computing. We show that they also offer significant potential for quantum metrology, surpassing the phase-sensing sensitivity of all Gaussian states at equal average photon number. Optimal sensitivity requires only moderate initial squeezing, and the non-Gaussian advantage remains robust against loss and detection noise. We identify optimal measurement strategies and show that several experimentally relevant preparation schemes surpass Gaussian limits, in some cases reaching the sensitivity of cubic phase states. Our results establish cubic phase states as a promising resource for quantum-enhanced precision measurements beyond Gaussian limits.
Recent years have witnessed a growing interest in understating the limitations imposed by quantum noise in precision measurements and devising techniques to reduce it. The attention is currently turning to the simultaneously estimation of several parameters of interest, driven by its promising potential across a wide range of sensing applications as well as fueled by experimental progress in various optical and atomic platforms. Here, we provide a comprehensive overview of key research directions in multiparameter quantum sensing and metrology, highlighting both opportunities and challenges. We introduce the basic framework, discuss ultimate sensitivity bounds, optimal measurement strategies, and the role of quantum incompatibility, showing important differences with respect to single-parameter estimation. Additionally, we discuss emerging experimental implementations in distributed quantum sensing, including cutting-edge optimization techniques. This review aims to bridge the gap between theory and experiments, paving the way for the next-generation of quantum sensors and their integration with other quantum technologies.
In this thesis I study optimal strategies to estimate or characterize quantum states and processes (quantum channels). I consider the problem of estimating a phase encoded on a gaussian state. Phase estimation is at the heart of many quantum metrology applications, such as gravitational wave detectors or clock synchronization. I address the problem to the phase estimation fidelity for pure and mixed gaussian states and study how temperature affects the precision of estimation. Although the case of pure states has been studied before, very little is known about estimation in mixed states. The interest in mixed gaussian states relies on the fact that these are the states one has in real experiments with light due to the unavoidable presence of noise. Displaced and squeezed thermal states are studied. For the case of displaced states, I find that fidelity estimation gets worse when the temperature increases. On the contrary, for squeezed thermal states I find the surprising result that a larger temperature yields better estimation. This apparently paradoxical feature, also appears when I derive the estimation accuracy that can be obtained when an asymptotically large number of copies of the state is available. I also study quantum benchmarks that can be applied to a wide variety of protocols, such us quantum storage or quantum teleportation. A very important question in QIT is to know whether a particular quantum protocol can be realized by classical means with the same efficiency. After all, QIT lives from the promise of this quantum advantage. This question becomes specially relevant in experimental (real) implementations of quantum schemes. In real experiments there are always losses and the ideal quantum protocols become imperfect. It is then necessary to assess whether the same experimental result could be obtained by classical (less costly) means. So, for example, in a particular teleportation experiment -which involves generation of entanglement, complicated Bell measurements, fighting decoherence, etc.- one might ask whether one could achieve the same (i.e. mapping the state of a system to a second system located in a different place or time) by measuring the system, transmitting the collected information to the other location, and finally preparing the system accordingly. It is hence of paramount importance to give bounds on the efficiency of these measure and prepare (or entanglement breaking) channels. For this purpose we propose a threshold based on a phase-covariant family of states. Besides of being a family with a straightforward group-theoretical structure, which gives obvious computational advantages, this family is interesting because it can be tested experimentally also in a straightforward way. A crucial feature for the practical use of our benchmark is that it does not require pure (ideal) input states. I finally consider the problem of estimating the parameter of the amplification channel. The amplification channel is interesting by itself but also by the fact that the Hawking-Unruh effect can be formally modeled by it. The Unruh-Hawking effect is a relativistic effect and as such it is hard to measure and detect in current experiments. I investigate whether quantum strategies can provide an improvement over classical protocols in the estimation of the amplification parameter. If the field is inertially prepared in the vacuum one could measure its temperature as detected by a noninertial observer and extract information about the parameter. But I would like to know if the vacuum state is the optimal probe state in an inertial frame for such a task or a better sensitivity could be achieved if the field were in a state of nonzero energy (mean photon number) from an inertial perspective. The aim is to determine the optimal input states, so that, by optimally measuring the output, one can construct an estimator for amplification channel parameter which is unbiased and has the minimum possible variance.
This thesis aims to help in bridging the gap between the ideals of theoretical quantum metrology and its practical application. We take three major approaches to achieving this aim: to investigate the effect of noise on metrological schemes, to study the role of resources and to devise ways to engineer effective probe states from experimentally feasible elements. We find that noise is detrimental to measurement precision but that this may be overcome by thinking outside of the asymptotic regime. Considering resources, whilst entanglement may provide an advantage, it is only useful in limited circumstances and even in this case a very small entangled state may perform as well as a large one. This is also true in multiparameter metrology, where we find that it is possible for the simultaneous estimation of phase and noise to be advantageous, even when the parameters are not fully compatible. We discuss strategies for multiparameter estimation in both discrete and continuous variable formalisms. In the continuous variable formalism, we go beyond the consideration of entanglement as a resource and construct a generalised resource theory for Gaussian states and operations which has particular cases in entanglement, steerability and squeezing. We provide a measure for this resource as well as a no-go theorem for its distillation. Finally, we use a genetic algorithm to devise state engineering schemes to produce highly sensitive states for quantum metrology.
The fundamental precision limit of an interferometer is crucial since it bounds the best possible sensitivity one could achieve using such a device. This thesis will focus on several different interferometers and try to give the ultimate precision bounds by carefully counting all the resources used in the interferometers. The thesis begins with the basics of the quantum state of light. The fundamentals of quantum metrology are also reviewed and discussed. More specifically, the terminology of classical and quantum Cram\'er-Rao bound and classical and quantum Fisher information are introduced. Chapter 3 discusses the conclusive precision bounds in two-mode interferometer such as Mach-Zehnder interferometer (MZI) and SU(1,1) interferometer. I revisit the quantum Fisher information approach of these two interferometers and show the discrepancy of phase sensitivity on the physically same setup. Then I establish fundamental precision estimation bounds for such device, due to the reason that many works of literature fail to accurately count the resources and knowledge of phase-to-be-estimated used in the interferometers. The analysis suggests that for a MZI, one can never do better than SNL in phase sensitivity, when an input to one of the two ports is the vacuum. If one does not allow the detector to use any external phase reference or power resource, then the precision is limited by the SNL. For a SU(1,1) interferometer, firstly, when one of the input states is restricted to be a vacuum state, I showed that by using either the phase-averaging method or the quantum Fisher information matrix method, different phase configurations of the SU(1,1) interferometer result in the same QFI. Secondly, I compared the results of the phase-averaging method and the quantum Fisher information matrix method, and then I argued that for an SU(1,1) interferometer, phase averaging or quantum Fisher information matrix method is generally required, and they are equivalent. Finally, I used the quantum Fisher information matrix method to calculate the precision limit for other common input states, such as two coherent state inputs or coherent state with squeezed vacuum inputs. In chapter 4, I will consider a passive multi-mode interferometer for multiparameter phase estimation. It was suggested that optical networks with relatively inexpensive overhead---single photon Fock states, passive optical elements, and single photon detection---can show significant improvements over classical strategies for single-parameter estimation, when the number of modes in the network is small. In this chapter, I analytically compute the quantum Cramer-Rao bound to show these
We present a review on quantum metrology and sensing, from its foundations to current applications. Highlights of the review include consideration of both frequentist and Bayesian approaches to parameter estimation; single as well as multiparameter estimation; estimation for different encoding processes comprising unitary as well as noisy channels, quantum thermometry, and channels involving indefinite causal order; different estimation strategies incorporating also recent advances like quantum error correction-aided methods and reservoir engineering; usefulness of quantum Fisher information to detect resources; applications of quantum metrology in diverse arenas covering quantum many-body sensors, sensing protocols in atomic ensembles, atom-photon systems, and continuous-variable systems, quantum imaging, quantum illumination, atomic clocks and atom interferometry, etc; and experimental realizations of quantum sensors in different physical platforms.