Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2411.00260

Scalable quantum circuit design for QFT-based arithmetic

Murat Kurt, Ayda Kaltehei, Azmi Gençten, Selçuk Çakmak

Published Oct 31, 2024• 4 citations
arXivHTMLPDF

Abstract

In this research, we create a scalable version of the quantum Fourier transform-based arithmetic circuit to perform addition and subtraction operations on N n-bit unsigned integers encoded in quantum registers, and it is compatible with d-level quantum sources, called qudits. We present qubit- and ququart-based multi-input QFT adders, and we compare and discuss potential benefits such as circuit simplicity and noise sensitivity. The results show that a ququart-based system significantly reduces gate count and improves computational efficiency compared to qubit-based systems. Overall, the findings presented in this study represent a promising step forward in the development of efficient quantum arithmetic circuits, particularly for multi-input operations, with clear advantages for ququart-based systems in reducing gate count, decoherence, and circuit complexity.

DOI
10.48550/arxiv.2411.00260

Related papers

Performance evaluations of signed and unsigned noisy approximate quantum Fourier arithmetic

Robert Basili, Wenyang Qian, Shiplu Sarker +6 more

Abstract The Quantum Fourier Transform (QFT) grants competitive advantages, especially in resource usage and circuit approximation, for performing arithmetic operations on quantum computers , and offers a potential route towards a numerical quantum-computational paradigm. In this paper, we utilize efficient techniques to implement QFT-based integer addition and multiplications. These operations are fundamental to various quantum applications including Shor’s algorithm, weighted sum optimization problems in data processing and machine learning, and quantum algorithms requiring inner products. We carry out performance evaluations of these implementations based on IBM’s superconducting qubit architecture using different compatible noise models. We isolate the sensitivity of the component quantum circuits on both one-/two-qubit gate error rates, and the number of the arithmetic operands’ superposed integer states. We analyze performance, and identify the most effective approximation depths for unsigned quantum addition and quantum multiplication within the given context. We then perform a similar analysis of signed addition and compare to the unsigned results. We observe significant dependency of the optimal approximation depth on the degree of machine noise and the number of superposed states in certain performance regimes. Finally, we elaborate on the algorithmic challenges - relevant to signed, unsigned, modular and non-modular versions - that could also be applied to current implementations of QFT-based subtraction, division, exponentiation, and their potential tensor extensions. We analyze the performance trends in our results and speculate on possible future developments within this computational paradigm.

arXiv:2112.09349•The Journal of Supercomputing•Oct 15, 2025•2 citations

Performance Evaluations of Noisy Approximate Quantum Fourier Arithmetic

Robert Basili, Wenyang Qian, Shuo Tang +5 more

The Quantum Fourier Transform (QFT) grants competitive advantages, especially in resource usage and circuit approximation, for performing arithmetic operations on quantum computers, and offers a potential route towards a numerical quantum-computational paradigm. In this paper, we utilize efficient techniques to implement QFT-based integer addition and multiplications. These operations are fundamental to various quantum applications including Shor's algorithm, weighted sum optimization problems in data processing and machine learning, and quantum algorithms requiring inner products. We carry out performance evaluations of these implementations based on IBM's superconducting qubit architecture using different compatible noise models. We isolate the sensitivity of the component quantum circuits on both one-/two-qubit gate error rates, and the number of the arithmetic operands' superposed integer states. We analyze performance, and identify the most effective approximation depths for quantum add and quantum multiply within the given context. We observe significant dependency of the optimal approximation depth on the degree of machine noise and the number of superposed states in certain performance regimes. Finally, we elaborate on the algorithmic challenges - relevant to signed, unsigned, modular and non-modular versions - that could also be applied to current implementations of QFT-based subtraction, division, exponentiation, and their potential tensor extensions. We analyze performance trends in our results and speculate on possible future development within this computational paradigm.

IEEE International Symposium on Parallel & Distributed Processing, Workshops and Phd Forum•May 1, 2022•3 citations

Quantum-Fourier-transform-based quantum arithmetic with qudits

Archimedes Pavlidis, Emmanuel G. Floratos

We present some basic integer arithmetic quantum circuits, such as adders and multiplier-accumulators of various forms, which operate on multilevel qudits. The integers to be processed are represented in an alternative basis after they have been Fourier transformed. Several arithmetic circuits operating on Fourier-transformed integers have appeared in the literature for two-level qubits. Here we extend these techniques to multilevel qudits, as they may offer some advantages relative to qubit implementations. The arithmetic circuits presented here can be used as basic building blocks for higher level algorithms such as quantum phase estimation, quantum simulation, quantum optimization, etc. Detailed decomposition is given down to elementary two-level single- and two-qudit gates as such gates are the most appropriate for physical implementation. A complexity analysis is given after this decomposition step and it is shown that the depth of the circuits is linear in the number of qudits employed and quadratic in the dimension of each qudit while their quantum cost is quadratic in the number of the qudits and quadratic in the dimension.

arXiv:1707.08834•Physical Review A•Mar 16, 2021•51 citations

Quantum Non-Moduler Multiplication with QFT-Based Multi Input Parallelized Adder

Murat Kurtand Selçuk Çakmak, Azmi Gençten

In this study, we propose an efficient quantum multiplication approach based on a QFT-assisted parallelized addition scheme. The multiplication stage is implemented using a structure composed entirely of Toffoli gates, which generate partial products. In the second stage, these partial results are accumulated using a QFT-based adder. Unlike conventional QFT-based arithmetic circuits, the proposed design eliminates the repeated application of QFT and inverse QFT (IQFT) operations during intermediate summation processes. This leads to a significant reduction in the total gate count and circuit complexity, enabling a more resource-efficient implementation. To demonstrate the feasibility of the proposed approach, a quantum circuit that performs the multiplication of two 3-bit numbers is designed. The circuit is tested and validated using IBM quantum simulators. The results indicate that the proposed method provides a more efficient alternative to traditional quantum multiplication techniques in terms of gate cost and circuit depth.

quant-pharXiv:2604.00272•Apr 2, 2026•0 citations

Quantum arithmetic operations based on quantum fourier transform on signed integers

Engin Şahin

The quantum Fourier transform (QFT) brings efficiency in many respects, especially usage of resource, for most operations on quantum computers. In this study, the existing QFT-based and non-QFT-based quantum arithmetic operations are examined. The capabilities of QFT-based addition and multiplication are improved with some modifications. The proposed operations are compared with the nearest quantum arithmetic operations. Furthermore, novel QFT-based subtraction, division and exponentiation operations are presented. The proposed arithmetic operations can perform nonmodular operations on all signed numbers without any limitation by using less resources. In addition, novel quantum circuits of two’s complement, absolute value and comparison operations are also presented by using the proposed QFT-based addition and subtraction operations.

arXiv:2005.00443•International Journal of Quantum Information•Sep 1, 2020•39 citations

Quantum Fourier Transform‐Based Arithmetic Logic Unit on a Quantum Processor

Selçuk Çakmak, Murat Kurt, Azmi Gençten

Abstract This study proposes and construct a primitive quantum arithmetic logic unit (qALU) based on the quantum Fourier transform (QFT). The qALU is capable of performing arithmetic ADD (addition) and logic NAND gate operations. It designs a scalable quantum circuit and presents the circuits for driving ADD and NAND operations on two‐input and four‐input quantum channels, respectively. By comparing the required number of quantum gates for serial and parallel architectures in executing arithmetic addition, it evaluates the performance. It also execute the proposed quantum Fourier transform‐based qALU design on real quantum processor hardware provided by IBM. The results demonstrate that the proposed circuit can perform arithmetic and logic operations with a high success rate. Furthermore, it discusses in detail the potential implementations of the qALU circuit in the field of computer science, highlighting the possibility of constructing a soft‐core processor on a quantum processing unit.

arXiv:2306.09560•Annalen der Physik•Dec 15, 2023•10 citations
In this research, we create a scalable version of the quantum Fourier transform-based arithmetic circuit to perform addition and subtraction operations on N n-bit unsigned integers encoded in quantum registers, and it is compatible with d-level quantum sources, called qudits. We present qubit- and ququart-based multi-input QFT adders, and we compare and discuss potential benefits such as circuit simplicity and noise sensitivity. The results show that a ququart-based system significantly reduces gate count and improves computational efficiency compared to qubit-based systems. Overall, the findings presented in this study represent a promising step forward in the development of efficient quantum arithmetic circuits, particularly for multi-input operations, with clear advantages for ququart-based systems in reducing gate count, decoherence, and circuit complexity.
Abstract The Quantum Fourier Transform (QFT) grants competitive advantages, especially in resource usage and circuit approximation, for performing arithmetic operations on quantum computers , and offers a potential route towards a numerical quantum-computational paradigm. In this paper, we utilize efficient techniques to implement QFT-based integer addition and multiplications. These operations are fundamental to various quantum applications including Shor’s algorithm, weighted sum optimization problems in data processing and machine learning, and quantum algorithms requiring inner products. We carry out performance evaluations of these implementations based on IBM’s superconducting qubit architecture using different compatible noise models. We isolate the sensitivity of the component quantum circuits on both one-/two-qubit gate error rates, and the number of the arithmetic operands’ superposed integer states. We analyze performance, and identify the most effective approximation depths for unsigned quantum addition and quantum multiplication within the given context. We then perform a similar analysis of signed addition and compare to the unsigned results. We observe significant dependency of the optimal approximation depth on the degree of machine noise and the number of superposed states in certain performance regimes. Finally, we elaborate on the algorithmic challenges - relevant to signed, unsigned, modular and non-modular versions - that could also be applied to current implementations of QFT-based subtraction, division, exponentiation, and their potential tensor extensions. We analyze the performance trends in our results and speculate on possible future developments within this computational paradigm.
The Quantum Fourier Transform (QFT) grants competitive advantages, especially in resource usage and circuit approximation, for performing arithmetic operations on quantum computers, and offers a potential route towards a numerical quantum-computational paradigm. In this paper, we utilize efficient techniques to implement QFT-based integer addition and multiplications. These operations are fundamental to various quantum applications including Shor's algorithm, weighted sum optimization problems in data processing and machine learning, and quantum algorithms requiring inner products. We carry out performance evaluations of these implementations based on IBM's superconducting qubit architecture using different compatible noise models. We isolate the sensitivity of the component quantum circuits on both one-/two-qubit gate error rates, and the number of the arithmetic operands' superposed integer states. We analyze performance, and identify the most effective approximation depths for quantum add and quantum multiply within the given context. We observe significant dependency of the optimal approximation depth on the degree of machine noise and the number of superposed states in certain performance regimes. Finally, we elaborate on the algorithmic challenges - relevant to signed, unsigned, modular and non-modular versions - that could also be applied to current implementations of QFT-based subtraction, division, exponentiation, and their potential tensor extensions. We analyze performance trends in our results and speculate on possible future development within this computational paradigm.
We present some basic integer arithmetic quantum circuits, such as adders and multiplier-accumulators of various forms, which operate on multilevel qudits. The integers to be processed are represented in an alternative basis after they have been Fourier transformed. Several arithmetic circuits operating on Fourier-transformed integers have appeared in the literature for two-level qubits. Here we extend these techniques to multilevel qudits, as they may offer some advantages relative to qubit implementations. The arithmetic circuits presented here can be used as basic building blocks for higher level algorithms such as quantum phase estimation, quantum simulation, quantum optimization, etc. Detailed decomposition is given down to elementary two-level single- and two-qudit gates as such gates are the most appropriate for physical implementation. A complexity analysis is given after this decomposition step and it is shown that the depth of the circuits is linear in the number of qudits employed and quadratic in the dimension of each qudit while their quantum cost is quadratic in the number of the qudits and quadratic in the dimension.
In this study, we propose an efficient quantum multiplication approach based on a QFT-assisted parallelized addition scheme. The multiplication stage is implemented using a structure composed entirely of Toffoli gates, which generate partial products. In the second stage, these partial results are accumulated using a QFT-based adder. Unlike conventional QFT-based arithmetic circuits, the proposed design eliminates the repeated application of QFT and inverse QFT (IQFT) operations during intermediate summation processes. This leads to a significant reduction in the total gate count and circuit complexity, enabling a more resource-efficient implementation. To demonstrate the feasibility of the proposed approach, a quantum circuit that performs the multiplication of two 3-bit numbers is designed. The circuit is tested and validated using IBM quantum simulators. The results indicate that the proposed method provides a more efficient alternative to traditional quantum multiplication techniques in terms of gate cost and circuit depth.
The quantum Fourier transform (QFT) brings efficiency in many respects, especially usage of resource, for most operations on quantum computers. In this study, the existing QFT-based and non-QFT-based quantum arithmetic operations are examined. The capabilities of QFT-based addition and multiplication are improved with some modifications. The proposed operations are compared with the nearest quantum arithmetic operations. Furthermore, novel QFT-based subtraction, division and exponentiation operations are presented. The proposed arithmetic operations can perform nonmodular operations on all signed numbers without any limitation by using less resources. In addition, novel quantum circuits of two’s complement, absolute value and comparison operations are also presented by using the proposed QFT-based addition and subtraction operations.
Abstract This study proposes and construct a primitive quantum arithmetic logic unit (qALU) based on the quantum Fourier transform (QFT). The qALU is capable of performing arithmetic ADD (addition) and logic NAND gate operations. It designs a scalable quantum circuit and presents the circuits for driving ADD and NAND operations on two‐input and four‐input quantum channels, respectively. By comparing the required number of quantum gates for serial and parallel architectures in executing arithmetic addition, it evaluates the performance. It also execute the proposed quantum Fourier transform‐based qALU design on real quantum processor hardware provided by IBM. The results demonstrate that the proposed circuit can perform arithmetic and logic operations with a high success rate. Furthermore, it discusses in detail the potential implementations of the qALU circuit in the field of computer science, highlighting the possibility of constructing a soft‐core processor on a quantum processing unit.