Building on previous research on frequency allocation optimization for superconducting circuit quantum processors, this work incorporates several techniques to improve overall solution quality. We introduce constraints and imposed edgewise differences help to improve the optimization results. We also introduce optimization variables for the orientation of each edge, defined as the direction from the control qubit to the target qubit, to be chosen during optimization. To scale up to larger processors, multimodule designs are employed with various boundary conditions, thereby enhancing the collective yield. These enhancements allow for greater flexibility in processor design by eliminating the need for handpicked orientations. We support the efficient assembly of large processors with dense connectivity by choosing the best boundary conditions. Examples demonstrate that, at low computational cost, this optimization approach finds a frequency configuration for a square chip with over 1000 qubits and over 10% yield at much larger dispersion levels than required by previous approaches.
Building on previous research on frequency allocation optimization for superconducting circuit quantum processors, this work incorporates several techniques to improve overall solution quality. We introduce constraints and imposed edgewise differences help to improve the optimization results. We also introduce optimization variables for the orientation of each edge, defined as the direction from the control qubit to the target qubit, to be chosen during optimization. To scale up to larger processors, multimodule designs are employed with various boundary conditions, thereby enhancing the collective yield. These enhancements allow for greater flexibility in processor design by eliminating the need for handpicked orientations. We support the efficient assembly of large processors with dense connectivity by choosing the best boundary conditions. Examples demonstrate that, at low computational cost, this optimization approach finds a frequency configuration for a square chip with over 1000 qubits and over 10% yield at much larger dispersion levels than required by previous approaches.
Fixed-frequency superconducting quantum processors are one of the most mature quantum computing architectures with high-coherence qubits and simple controls. However, high-fidelity multiqubit gates pose tight requirements on individual qubit frequencies in these processors, and these constraints are difficult to satisfy when constructing larger processors due to the large dispersion in the fabrication of Josephson junctions. In this paper, we propose a mixed-integer-programming-based optimization approach that determines qubit frequencies to maximize the fabrication yield of quantum processors. We study traditional qubit and qutrit (three-level) architectures with cross-resonance interaction processors. We compare these architectures to a differential ac-Stark shift based on entanglement gates and show that our approach greatly improves the fabrication yield and also increases the scalability of these devices. Our approach is general and can be adapted to problems where one must avoid specific frequency collisions.
More computational resources (i.e., more physical qubits and qubit connections) on a superconducting quantum processor not only improve the performance but also result in more complex chip architecture with lower yield rate. Optimizing both of them simultaneously is a difficult problem due to their intrinsic trade-off. Inspired by the application-specific design principle, this paper proposes an automatic design flow to generate simplified superconducting quantum processor architecture with negligible performance loss for different quantum programs. Our architecture-design-oriented profiling method identifies program components and patterns critical to both the performance and the yield rate. A follow-up hardware design flow decomposes the complicated design procedure into three subroutines, each of which focuses on different hardware components and cooperates with corresponding profiling results and physical constraints. Experimental results show that our design methodology could outperform IBM's general-purpose design schemes with better Pareto-optimal results.,0
More physical qubits and qubit connections integrated on a superconducting quantum processor can improve the ability to execute quantum programs, but on the other hand, they might increase the probability of frequency collisions. Considering a performance and frequency collisions trade-off, it is a feasible method to optimize processor architecture aiming at running specific quantum programs. To this end, we propose a method for designing superconducting quantum processor architectures for the purpose of running specific quantum programs. Different from existing methods, our method is mainly based on graph theory to optimize processor architecture design. First, we convert the trade-off problem into the optimization of the distance between two points as well as the maximum degree in the processor architecture graph. Second, we consider the actual physical routing constraints and build a mathematical model for the optimization problem. Finally, we propose an automatic processor architecture design flow based on the mathematical model, which is implemented with an improved genetic algorithm. To show the effectiveness of our method, we selected sixteen quantum programs with different qubit numbers and different functions for comparison. Simulation results show that the architecture schemes of our method outperform IBM’s general-purpose square lattice architecture schemes. Compared to the general-purpose architecture schemes, the architecture schemes of our method have an average performance improvement of 15.61% and a minimum reduction of 21.33% in the probability of frequency collisions. Furthermore, in most of the selected quantum programs, our architecture schemes perform better than the eff-5-freq’s architecture schemes, with an average 6.58% improvement in performance and a minimum 6.45% reduction in the probability of frequency collisions. Therefore, our method can provide superconducting quantum processor architecture design with better performance and lower probability of frequency collisions for quantum programs.
Frequency crowding, the close spacing of qubit transitions, limits superconducting quantum processors through crosstalk, leakage, and spectator dependent errors. We introduce a Hamiltonian based framework that maps two- and three-body collision mechanisms onto a Max-k-Cut problem on qubit frequency allocation. In order to make larger lattices tractable, we introduce a cluster-stitching protocol that decomposes larger lattices into overlapping subgraphs and reconciles their local frequency assignments into globally consistent configurations. We tested our proposed framework across multiple qubit architectures to suppress dominant collision penalties by revealing a hardware residual crosstalk. We benchmark digitized counterdiabatic QAOA (DC-QAOA), standard QAOA, and simulated annealing. Counterdiabatic terms improve QAOA optimization near steep collision penalties, while simulated annealing achieves the lowest costs on the tested instances. These results indicate that our hardware-aware optimization connects microscopic interaction physics to processor-level frequency planning. These results enable a systematic solver for benchmarking of scalable software hardware co design.
Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.
Fixed-frequency transmon quantum computers (QCs) have advanced in coherence times, addressability, and gate fidelities. Unfortunately, these devices are restricted by the number of on-chip qubits, capping processing power and slowing progress toward fault-tolerance. Although emerging transmon devices feature over 100 qubits, building QCs large enough for meaningful demonstrations of quantum advantage requires overcoming many design challenges. For example, today’s transmon qubits suffer from significant variation due to limited precision in fabrication. As a result, barring significant improvements in current fabrication techniques, scaling QCs by building ever larger individual chips with more qubits is hampered by device variation. Severe device variation that degrades QC performance is referred to as a defect. Here, we focus on a specific defect known as a frequency collision. When transmon frequencies collide, their difference falls within a range that limits two-qubit gate fidelity. Frequency collisions occur with greater probability on larger QCs, causing collision-free yields to decline as the number of on-chip qubits increases. As a solution, we propose exploiting the higher yields associated with smaller QCs by integrating quantum chiplets within quantum multi-chip modules (MCMs). Yield, gate performance, and application-based analysis show the feasibility of QC scaling through modularity. Our results demonstrate that chiplet architectures, relative to monolithic designs, benefit from average yield improvements ranging from 9.6 – 92.6 × for ≲5 qubit machines. In addition, our simulations explore the design space of chiplet systems and discover configurations that demonstrate average two-qubit gate infidelity reductions that are at best 0.815 × their monolithic counterpart. Finally, we observe that carefully-selected modular systems achieve fidelity improvements on a range of benchmark circuits.