Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2410.18397 · Physical Review Applied

Ultrafast single-photon detector based on a nanophotonic parametric amplifier

Elina Sendonaris, James Williams, Rajveer Nehra, Robert M. Gray, Ryoto Sekine, Luis M. Ledezma, Alireza Marandi

Published Mar 11, 2026• 8 citations
arXivHTMLPDF

Abstract

Integrated photonic quantum information processing (QIP) has advanced rapidly due to progress in various nanophotonic platforms. Single photon detectors have been the subject of intense study due to their ubiquity in QIP systems, yet many state-of-the art detectors operate at cryogenic temperatures under vacuum and suffer from long dead times. We propose and demonstrate a single photon detection scheme based on optical parametric amplification in nanophotonic lithium niobate (LN) combined with a classical photodetector. We use quantum detector tomography and experimentally demonstrate an efficiency of 26.5% with a 2.2% dark count rate. We show that by improving the nonlinearity-to-loss ratio in nanophotonics and using homodyne detection on a squeezed pump, the detector can achieve 69% efficiency with 0.9% dark count rate. The detector operates at room temperature, has no intrinsic dead time, and is readily integrated in LN nanophotonics, in which many other components of photonic QIP are available. Our results represent a step towards all-optical ultrafast photon detection for scalable nanophotonic QIP.

DOI
10.1103/c58l-h1gh

Related papers

Ultrafast all-optical measurement of squeezed vacuum in a lithium niobate nanophotonic circuit

James Williams, Elina Sendonaris, Rajveer Nehra +4 more

Squeezed vacuum, a fundamental resource for continuous-variable quantum information processing, has been used to demonstrate quantum advantages in sensing, communication, and computation. While most experiments use homodyne detection to characterize squeezing and are therefore limited to electronic bandwidths, recent experiments have shown optical parametric amplification (OPA) to be a viable measurement strategy. Here, we realize OPA-based quantum state tomography in integrated photonics and demonstrate the generation and all-optical Wigner tomography of squeezed vacuum in a nanophotonic circuit. We employ dispersion engineering to enable the distortion-free propagation of femtosecond pulses and achieve ultrabroad operation bandwidths, effectively lifting the speed restrictions imposed by traditional electronics on quantum measurements with a theoretical maximum clock speed of 6.5 THz. We implement our circuit on thin-film lithium niobate, a platform compatible with a wide variety of active and passive photonic components. Our results chart a course for realizing all-optical ultrafast quantum information processing in an integrated room-temperature platform.

arXiv:2502.00518•Physical Review Research•Aug 27, 2025•7 citations

Measuring and Characterizing Ultrafast Quantum States Using Nanophotonic Optical Parametric Amplifiers

Elina Sendonaris

Photonics offers the potential for large-scale, room-temperature, and ultrafast quantum operations. Multiplexing pulses of light allows for high throughput speeds and dense encoding, with tens of thousands of optical modes being present in a time as short as a microsecond. However, the measurement speed of electronic devices such as photodetectors is currently one bottleneck in such time-multiplexed scalability, because many quantum optical protocols rely on measurement, including state preparation, feed-forward, and feedback. Furthermore, characterization of quantum states and modes is essential for their effective use. Using nanophotonic optical parametric amplifiers (OPAs) presents one way to circumvent the measurement limitations of current quantum photonic schemes. Their large amplification bandwidth, enabled by dispersion engineering on nanophotonic integrated platforms, allows information encoded in femtosecond-scale, THz-bandwidth, multimode quantum optical states to be accessed with nonlinear optical interactions. In this work, we show how ultra-broadband integrated nanophotonic OPAs can be used to measure ultrafast and multimode quantum states of light. First, we explore the single-photon detection capabilities of OPAs, showing that current OPAs operating in the Gaussian regime are capable of 250 MHz photon count rates with 26% efficiency and a 2% dark count probability. We also show how non-Gaussian operation through pump depletion, with performance that approaches state-of-the-art photon detectors in terms of efficiency and dark count rate while retaining ultrafast operation, can become experimentally possible with a higher nonlinear coupling rate and lower loss. Next, we use nanophotonic OPAs to both generate and characterize multimode ultrafast squeezed vacuum. We use the photocurrent distribution of amplified squeezed vacuum to recover 2.41 dB of squeezing in one mode of a 154-fs multimode squeezed pulse and reconstruct its Wigner distribution. Finally, we investigate the capabilities of broadband nanophotonic OPAs to determine the temporal mode structure and quadrature variances of ultra-broadband temporally multimode quantum states by adapting frequency-resolved optical gating to the quantum regime. We numerically show the successful full characterization of a multimode squeezed state, even in the presence of noise. Together, these results establish OPAs as a valuable measurement device for measuring ultrafast quantum pulses and learning the structure of multimode quantum states, and they provide one building block towards a framework for scalable continuous-variable quantum photonics in which state generation, manipulation, and characterization occur within the same nanophotonic platform.

•Jun 2, 2026•0 citations

Single-photon detection and cryogenic reconfigurability in lithium niobate nanophotonic circuits

Emma Lomonte, Martin A. Wolff, Fabian Beutel +4 more

Lithium-Niobate-On-Insulator (LNOI) is emerging as a promising platform for integrated quantum photonic technologies because of its high second-order nonlinearity and compact waveguide footprint. Importantly, LNOI allows for creating electro-optically reconfigurable circuits, which can be efficiently operated at cryogenic temperature. Their integration with superconducting nanowire single-photon detectors (SNSPDs) paves the way for realizing scalable photonic devices for active manipulation and detection of quantum states of light. Here we demonstrate integration of these two key components in a low loss (0.2 dB/cm) LNOI waveguide network. As an experimental showcase of our technology, we demonstrate the combined operation of an electrically tunable Mach-Zehnder interferometer and two waveguide-integrated SNSPDs at its outputs. We show static reconfigurability of our system with a bias-drift-free operation over a time of 12 hours, as well as high-speed modulation at a frequency up to 1 GHz. Our results provide blueprints for implementing complex quantum photonic devices on the LNOI platform.

arXiv:2103.10973•Nature Communications•Nov 25, 2021•149 citations

Ultrashort pulse biphoton source in lithium niobate nanophotonics at 2 μm

James Williams, Rajveer Nehra, Elina Sendonaris +4 more

Photonics offers unique capabilities for quantum information processing (QIP) such as room-temperature operation, the scalability of nanophotonics, and access to ultrabroad bandwidths and consequently ultrafast operation. Ultrashort pulse sources of quantum states in nanophotonics are an important building block for achieving scalable ultrafast QIP; however, their demonstrations so far have been sparse. Here, we demonstrate a femtosecond biphoton source in dispersion-engineered periodically poled lithium niobate nanophotonics. We measure 17 THz of bandwidth for the source centered at 2.09 µm, corresponding to a few optical cycles, with a brightness of 8.8 GHz/mW. Our results open new paths toward realization of ultrafast nanophotonic QIP.

arXiv:2402.05163•Nanophotonics•Jun 12, 2024•15 citations

Quantum frequency conversion and single-photon detection with lithium niobate nanophotonic chips

Xina Wang, Xufeng Jiao, Bin Wang +5 more

Abstract The lithium niobate on insulator (LNOI) platform has revolutionized lithium niobate materials, and a series of quantum photonic chips have exhibited unprecedented performances. Quantum frequency conversion (QFC) that enables quantum state preservation during frequency conversion is crucial in quantum technology. This work demonstrates a low-noise QFC process on the LNOI nanophotonic platform, connecting telecom and near-visible bands. An internal conversion efficiency of 73% and an on-chip noise count of 900 counts per second (cps) are achieved. Furthermore, the preservation of quantum statistical properties is verified, indicating the QFC chip’s promise for extensive applications of LNOI integrated circuits in quantum information. Based on this chip, we constructed an upconversion single-photon detector with a detection efficiency of 8.7% and a noise of 300 cps, paving the way to integrated on-chip single-photon detection. The realization of a low-noise QFC device also provide a pathway for practical chip-scale QFC-based quantum systems in heterogeneous configurations.

arXiv:2209.08484•npj Quantum Information•Apr 14, 2023•112 citations

A superconducting nanowire single photon detector on lithium niobate

Michael G. Tanner, L. San Emeterio Alvarez, Weitao Jiang +3 more

Superconducting nanowire single photon detectors (SNSPDs) are a key enabling technology for optical quantum information science. In this paper we demonstrate a SNSPD fabricated on lithium niobate, an important material for high speed integrated photonic circuits. We report a system detection efficiency of 0.15% at a 1 kHz dark count rate with a maximum of ~1% close to the critical current at 1550 nm wavelength for a parallel wire SNSPD with front side illumination. There is clear scope for improving on this performance with further materials optimization. Detector integration with a lithium niobate optical waveguide is simulated, demonstrating the potential for high single photon detection efficiency in an integrated quantum optic circuit.

Nanotechnology•Nov 26, 2012•49 citations
Integrated photonic quantum information processing (QIP) has advanced rapidly due to progress in various nanophotonic platforms. Single photon detectors have been the subject of intense study due to their ubiquity in QIP systems, yet many state-of-the art detectors operate at cryogenic temperatures under vacuum and suffer from long dead times. We propose and demonstrate a single photon detection scheme based on optical parametric amplification in nanophotonic lithium niobate (LN) combined with a classical photodetector. We use quantum detector tomography and experimentally demonstrate an efficiency of 26.5% with a 2.2% dark count rate. We show that by improving the nonlinearity-to-loss ratio in nanophotonics and using homodyne detection on a squeezed pump, the detector can achieve 69% efficiency with 0.9% dark count rate. The detector operates at room temperature, has no intrinsic dead time, and is readily integrated in LN nanophotonics, in which many other components of photonic QIP are available. Our results represent a step towards all-optical ultrafast photon detection for scalable nanophotonic QIP.
Squeezed vacuum, a fundamental resource for continuous-variable quantum information processing, has been used to demonstrate quantum advantages in sensing, communication, and computation. While most experiments use homodyne detection to characterize squeezing and are therefore limited to electronic bandwidths, recent experiments have shown optical parametric amplification (OPA) to be a viable measurement strategy. Here, we realize OPA-based quantum state tomography in integrated photonics and demonstrate the generation and all-optical Wigner tomography of squeezed vacuum in a nanophotonic circuit. We employ dispersion engineering to enable the distortion-free propagation of femtosecond pulses and achieve ultrabroad operation bandwidths, effectively lifting the speed restrictions imposed by traditional electronics on quantum measurements with a theoretical maximum clock speed of 6.5 THz. We implement our circuit on thin-film lithium niobate, a platform compatible with a wide variety of active and passive photonic components. Our results chart a course for realizing all-optical ultrafast quantum information processing in an integrated room-temperature platform.
Photonics offers the potential for large-scale, room-temperature, and ultrafast quantum operations. Multiplexing pulses of light allows for high throughput speeds and dense encoding, with tens of thousands of optical modes being present in a time as short as a microsecond. However, the measurement speed of electronic devices such as photodetectors is currently one bottleneck in such time-multiplexed scalability, because many quantum optical protocols rely on measurement, including state preparation, feed-forward, and feedback. Furthermore, characterization of quantum states and modes is essential for their effective use. Using nanophotonic optical parametric amplifiers (OPAs) presents one way to circumvent the measurement limitations of current quantum photonic schemes. Their large amplification bandwidth, enabled by dispersion engineering on nanophotonic integrated platforms, allows information encoded in femtosecond-scale, THz-bandwidth, multimode quantum optical states to be accessed with nonlinear optical interactions. In this work, we show how ultra-broadband integrated nanophotonic OPAs can be used to measure ultrafast and multimode quantum states of light. First, we explore the single-photon detection capabilities of OPAs, showing that current OPAs operating in the Gaussian regime are capable of 250 MHz photon count rates with 26% efficiency and a 2% dark count probability. We also show how non-Gaussian operation through pump depletion, with performance that approaches state-of-the-art photon detectors in terms of efficiency and dark count rate while retaining ultrafast operation, can become experimentally possible with a higher nonlinear coupling rate and lower loss. Next, we use nanophotonic OPAs to both generate and characterize multimode ultrafast squeezed vacuum. We use the photocurrent distribution of amplified squeezed vacuum to recover 2.41 dB of squeezing in one mode of a 154-fs multimode squeezed pulse and reconstruct its Wigner distribution. Finally, we investigate the capabilities of broadband nanophotonic OPAs to determine the temporal mode structure and quadrature variances of ultra-broadband temporally multimode quantum states by adapting frequency-resolved optical gating to the quantum regime. We numerically show the successful full characterization of a multimode squeezed state, even in the presence of noise. Together, these results establish OPAs as a valuable measurement device for measuring ultrafast quantum pulses and learning the structure of multimode quantum states, and they provide one building block towards a framework for scalable continuous-variable quantum photonics in which state generation, manipulation, and characterization occur within the same nanophotonic platform.
Lithium-Niobate-On-Insulator (LNOI) is emerging as a promising platform for integrated quantum photonic technologies because of its high second-order nonlinearity and compact waveguide footprint. Importantly, LNOI allows for creating electro-optically reconfigurable circuits, which can be efficiently operated at cryogenic temperature. Their integration with superconducting nanowire single-photon detectors (SNSPDs) paves the way for realizing scalable photonic devices for active manipulation and detection of quantum states of light. Here we demonstrate integration of these two key components in a low loss (0.2 dB/cm) LNOI waveguide network. As an experimental showcase of our technology, we demonstrate the combined operation of an electrically tunable Mach-Zehnder interferometer and two waveguide-integrated SNSPDs at its outputs. We show static reconfigurability of our system with a bias-drift-free operation over a time of 12 hours, as well as high-speed modulation at a frequency up to 1 GHz. Our results provide blueprints for implementing complex quantum photonic devices on the LNOI platform.
Photonics offers unique capabilities for quantum information processing (QIP) such as room-temperature operation, the scalability of nanophotonics, and access to ultrabroad bandwidths and consequently ultrafast operation. Ultrashort pulse sources of quantum states in nanophotonics are an important building block for achieving scalable ultrafast QIP; however, their demonstrations so far have been sparse. Here, we demonstrate a femtosecond biphoton source in dispersion-engineered periodically poled lithium niobate nanophotonics. We measure 17 THz of bandwidth for the source centered at 2.09 µm, corresponding to a few optical cycles, with a brightness of 8.8 GHz/mW. Our results open new paths toward realization of ultrafast nanophotonic QIP.
Abstract The lithium niobate on insulator (LNOI) platform has revolutionized lithium niobate materials, and a series of quantum photonic chips have exhibited unprecedented performances. Quantum frequency conversion (QFC) that enables quantum state preservation during frequency conversion is crucial in quantum technology. This work demonstrates a low-noise QFC process on the LNOI nanophotonic platform, connecting telecom and near-visible bands. An internal conversion efficiency of 73% and an on-chip noise count of 900 counts per second (cps) are achieved. Furthermore, the preservation of quantum statistical properties is verified, indicating the QFC chip’s promise for extensive applications of LNOI integrated circuits in quantum information. Based on this chip, we constructed an upconversion single-photon detector with a detection efficiency of 8.7% and a noise of 300 cps, paving the way to integrated on-chip single-photon detection. The realization of a low-noise QFC device also provide a pathway for practical chip-scale QFC-based quantum systems in heterogeneous configurations.
Superconducting nanowire single photon detectors (SNSPDs) are a key enabling technology for optical quantum information science. In this paper we demonstrate a SNSPD fabricated on lithium niobate, an important material for high speed integrated photonic circuits. We report a system detection efficiency of 0.15% at a 1 kHz dark count rate with a maximum of ~1% close to the critical current at 1550 nm wavelength for a parallel wire SNSPD with front side illumination. There is clear scope for improving on this performance with further materials optimization. Detector integration with a lithium niobate optical waveguide is simulated, demonstrating the potential for high single photon detection efficiency in an integrated quantum optic circuit.