Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2409.09452 · SciPost Physics Core

Energy exchange and fluctuations between a dissipative qubit and a monitor under continuous measurement and feedback

Tsuyoshi Yamamoto, 康弘 都倉

Published Feb 10, 2025• 1 citation
arXivHTMLPDF

Abstract

Continuous quantum measurement and feedback induce energy exchange between a dissipative qubit and a monitor even in the steady state, as a measurement backaction. Using the Lindblad equation, we identified the maximum and minimum values of the steady-state energy flow as the measurement and feedback states vary, and we demonstrate the qubit cooling induced by these processes. Turning our attention to quantum trajectories under continuous measurement and feedback, we observe that the energy flow fluctuates around the steady-state values. We reveal that the fluctuations are strongly influenced by the measurement backaction, distinguishing them from the standard Poisson noise typically observed in electronic circuits. Our results offer potential application in the development of quantum refrigerators controlled by continuous measurement and feedback, and provide deep insight into quantum thermodynamics from the perspective of fluctuation.

DOI
10.21468/scipostphyscore.8.1.016

Related papers

Continuous measurement boosted adiabatic quantum thermal machines

Bibek Bhandari, Andrew N. Jordan

We present a unified approach to study continuous measurement-based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady-state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement-based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continuous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomenon of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement-based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as nonlinear system-bath couplings. We observe that nonlinear coupling produces cooling effects in certain regimes where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement-based refrigerators can have similar or better coefficient of performance in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement-based quantum thermal machines to refrigeration in quantum processing networks.

arXiv:2112.03971•Physical Review Research•Aug 5, 2022•32 citations

Continuous weak measurement and feedback control of a solid-state charge qubit: A physical unravelling of non-Lindblad master equation

Shi-Kuan Wang, Jinshuang Jin, Xin-Qi Li

Conventional quantum trajectory theory developed in quantum optics is largely based on the physical unravelling of a Lindblad-type master equation, which constitutes the theoretical basis of continuous quantum measurement and feedback control. In this work, in the context of continuous quantum measurement and feedback control of a solid-state charge qubit, we present a physical unravelling scheme of a non-Lindblad-type master equation. Self-consistency and numerical efficiency are well demonstrated. In particular, the control effect is manifested in the detector noise spectrum, and the effect of measurement voltage is discussed.

arXiv:cond-mat/0611513•Physical Review B•Apr 4, 2007•17 citations

Quantum thermodynamics of continuous feedback control

Kacper Prech, Joël Aschwanden, Patrick P. Potts

The laws of thermodynamics are a cornerstone for describing nanoscale and open quantum systems. However, formulating these laws for systems under continuous feedback control and under experimentally relevant conditions is challenging. In this work, we lay out a formalism for the laws of thermodynamics in an open quantum system under continuous measurement and feedback described by a Quantum Fokker Planck Master Equation. We derive expressions for work, heat, and measurement-induced energy changes, and we investigate entropy production and fluctuation theorems. We illustrate our results with a continuous version of a measurement-driven Szilard engine, as well as a work extraction scheme in a two-level system under bang-bang control. Our results provide insights into the energetics as well as the irreversibility of classical and quantum systems under continuous feedback control.

arXiv:2505.16615•Physical Review A•Oct 14, 2026•10 citations

Quantum Jumps and Measurement Backaction in a Superconducting Qubit

D. H. Slichter

Real-time monitoring of a quantum state provides powerful tools for studying the backaction of quantum measurement and performing quantum feedback. Historically, this monitoring capability has been the exclusive province of atomic and optical physics. This thesis describes the implementation of the first such high-fidelity readout scheme in a solid state circuit, a superconducting quantum bit (qubit) coupled to a microwave cavity in the circuit quantum electrodynamics (circuit QED) architecture. The qubit-state-dependent resonance frequency of the cavity is probed with a microwave drive tone, and the resulting signal amplified using a fast, ultralow-noise superconducting parametric amplifier. This arrangement enables the observation of quantum jumps between the qubit states in real time. The ability to monitor the qubit continuously with high fidelity and resolve quantum jumps can be used to investigate the backaction of the measurement process on the qubit. This thesis examines the quantum Zeno effect--where strong measurement inhibits the evolution of a quantum system-- as well as the transition to non-ideal measurement with increasing measurement strength in the circuit QED architecture, a phenomenon shown to be due to the upconversion of low-frequency dephasing noise. These data allow probes of ``universal'' flux noise in previously inaccessible frequency ranges. The work presented here opens the door for quantum feedback and error correction in solid-state quantum systems using continuous weak measurement.

•Jan 1, 2011•14 citations

Measurement-based quantum feedback controls for quantum computation

Song Zhang

The advance of experimental techniques in circuit quantum electrodynamics over last decadehas made it possible to monitor the evolution of qubits under continuous measurements in\nreal time . This kind of measurements, as compared to the discrete ones, provides a stream\nof information for feedback to alter the system's quantum dynamics continuously in a desired\nmanner, thus allowing broader possibilities. We obtain the information at a cost, the backaction on the states. However, the back-action turns out not to be just something disturbing \nand harmful to the control but instead can be harnessed, together with the control, to steer the system to our targets. \nThis thesis discusses one such application, namely to use measurements to create entanglement from remote qubits under locally optimal control. It is illustrated that by carefully designing symmetric measurement and feedback operators, we can construct efficient Markovian or non-Markovian protocols which generate N-qubit W,\ngeneral Dicke and Greenberger-Horne-Zeilinger states with high fidelity above 94% up to\nN = 100. In some cases, the fidelity even approaches unity. Following that, we describe how\nto take advantages of the continuous stream of information to protect the unitary dynamics of\na quantum system subject to noises. We develop a practical protocol for continuous operation\nof a quantum error correcting code for protection of coherent evolution due to an encoded\nHamiltonian against environmental errors, using the three qubit bit-flip code and bit-flip\nerrors as a canonical example. We demonstrate, for both quantum memory and adiabatic\nHamiltonians, that the protocol, once optimized, can significantly reduce logical errors with\na performance which is close to the theoretical limit of the bit-flip code's capability. In the\nadiabatic Hamiltonian case, we also propose some novel correction operators instead of the\nconventional ones to further reduce the logical errors.

•Jan 1, 2020•1 citation

Measurement-based feedback control of a quantum system in a harmonic potential

Amy Rouillard, Humairah Bassa, Shamik Maharaj +3 more

Abstract We present a formulation of measurement-based feedback control of a single quantum particle in one spatial dimension to consider arbitrary linear combinations of the position and momentum of the particle used as observables for monitoring and as generators of unitary feedback with strength proportional to the measured signal. We derive a feedback master equation and discuss a general approach to computing the steady-state solutions for arbitrary potentials. For a quantum harmonic oscillator or a free particle, we show that it is possible to cool and confine the system using feedback that simultaneously damps the measured observable and its conjugate momentum. Our general approach allows to identify a combination of measurement and feedback variables that, under certain circumstances, completely mitigates the noise induced by the measurement. The resulting deterministic evolution of expectation values in each realisation of the measurement resembles the dynamics of a damped classical oscillator, leading to a stationary state centred at the minimum of the potential, which becomes the ground state in the weak measurement limit. Remarkably, this stabilisation can be achieved using a fixed generator of feedback that is determined by the asymptotic values of the second-order moments of the steady state. In addition, we demonstrate that appropriate feedback adds a quadratic term in the measured observable to the Hamiltonian of the system. Moreover, we provide an argument for the possibility to cool systems with arbitrary potentials, provided that the measurement is strong enough to localise the particle on an interval smaller than the characteristic length scale of the potential.

arXiv:2212.12292•New Journal of Physics•Feb 23, 2026•1 citation
Continuous quantum measurement and feedback induce energy exchange between a dissipative qubit and a monitor even in the steady state, as a measurement backaction. Using the Lindblad equation, we identified the maximum and minimum values of the steady-state energy flow as the measurement and feedback states vary, and we demonstrate the qubit cooling induced by these processes. Turning our attention to quantum trajectories under continuous measurement and feedback, we observe that the energy flow fluctuates around the steady-state values. We reveal that the fluctuations are strongly influenced by the measurement backaction, distinguishing them from the standard Poisson noise typically observed in electronic circuits. Our results offer potential application in the development of quantum refrigerators controlled by continuous measurement and feedback, and provide deep insight into quantum thermodynamics from the perspective of fluctuation.
We present a unified approach to study continuous measurement-based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady-state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement-based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continuous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomenon of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement-based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as nonlinear system-bath couplings. We observe that nonlinear coupling produces cooling effects in certain regimes where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement-based refrigerators can have similar or better coefficient of performance in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement-based quantum thermal machines to refrigeration in quantum processing networks.
Conventional quantum trajectory theory developed in quantum optics is largely based on the physical unravelling of a Lindblad-type master equation, which constitutes the theoretical basis of continuous quantum measurement and feedback control. In this work, in the context of continuous quantum measurement and feedback control of a solid-state charge qubit, we present a physical unravelling scheme of a non-Lindblad-type master equation. Self-consistency and numerical efficiency are well demonstrated. In particular, the control effect is manifested in the detector noise spectrum, and the effect of measurement voltage is discussed.
The laws of thermodynamics are a cornerstone for describing nanoscale and open quantum systems. However, formulating these laws for systems under continuous feedback control and under experimentally relevant conditions is challenging. In this work, we lay out a formalism for the laws of thermodynamics in an open quantum system under continuous measurement and feedback described by a Quantum Fokker Planck Master Equation. We derive expressions for work, heat, and measurement-induced energy changes, and we investigate entropy production and fluctuation theorems. We illustrate our results with a continuous version of a measurement-driven Szilard engine, as well as a work extraction scheme in a two-level system under bang-bang control. Our results provide insights into the energetics as well as the irreversibility of classical and quantum systems under continuous feedback control.
Real-time monitoring of a quantum state provides powerful tools for studying the backaction of quantum measurement and performing quantum feedback. Historically, this monitoring capability has been the exclusive province of atomic and optical physics. This thesis describes the implementation of the first such high-fidelity readout scheme in a solid state circuit, a superconducting quantum bit (qubit) coupled to a microwave cavity in the circuit quantum electrodynamics (circuit QED) architecture. The qubit-state-dependent resonance frequency of the cavity is probed with a microwave drive tone, and the resulting signal amplified using a fast, ultralow-noise superconducting parametric amplifier. This arrangement enables the observation of quantum jumps between the qubit states in real time. The ability to monitor the qubit continuously with high fidelity and resolve quantum jumps can be used to investigate the backaction of the measurement process on the qubit. This thesis examines the quantum Zeno effect--where strong measurement inhibits the evolution of a quantum system-- as well as the transition to non-ideal measurement with increasing measurement strength in the circuit QED architecture, a phenomenon shown to be due to the upconversion of low-frequency dephasing noise. These data allow probes of ``universal'' flux noise in previously inaccessible frequency ranges. The work presented here opens the door for quantum feedback and error correction in solid-state quantum systems using continuous weak measurement.
The advance of experimental techniques in circuit quantum electrodynamics over last decadehas made it possible to monitor the evolution of qubits under continuous measurements in\nreal time . This kind of measurements, as compared to the discrete ones, provides a stream\nof information for feedback to alter the system's quantum dynamics continuously in a desired\nmanner, thus allowing broader possibilities. We obtain the information at a cost, the backaction on the states. However, the back-action turns out not to be just something disturbing \nand harmful to the control but instead can be harnessed, together with the control, to steer the system to our targets. \nThis thesis discusses one such application, namely to use measurements to create entanglement from remote qubits under locally optimal control. It is illustrated that by carefully designing symmetric measurement and feedback operators, we can construct efficient Markovian or non-Markovian protocols which generate N-qubit W,\ngeneral Dicke and Greenberger-Horne-Zeilinger states with high fidelity above 94% up to\nN = 100. In some cases, the fidelity even approaches unity. Following that, we describe how\nto take advantages of the continuous stream of information to protect the unitary dynamics of\na quantum system subject to noises. We develop a practical protocol for continuous operation\nof a quantum error correcting code for protection of coherent evolution due to an encoded\nHamiltonian against environmental errors, using the three qubit bit-flip code and bit-flip\nerrors as a canonical example. We demonstrate, for both quantum memory and adiabatic\nHamiltonians, that the protocol, once optimized, can significantly reduce logical errors with\na performance which is close to the theoretical limit of the bit-flip code's capability. In the\nadiabatic Hamiltonian case, we also propose some novel correction operators instead of the\nconventional ones to further reduce the logical errors.
Abstract We present a formulation of measurement-based feedback control of a single quantum particle in one spatial dimension to consider arbitrary linear combinations of the position and momentum of the particle used as observables for monitoring and as generators of unitary feedback with strength proportional to the measured signal. We derive a feedback master equation and discuss a general approach to computing the steady-state solutions for arbitrary potentials. For a quantum harmonic oscillator or a free particle, we show that it is possible to cool and confine the system using feedback that simultaneously damps the measured observable and its conjugate momentum. Our general approach allows to identify a combination of measurement and feedback variables that, under certain circumstances, completely mitigates the noise induced by the measurement. The resulting deterministic evolution of expectation values in each realisation of the measurement resembles the dynamics of a damped classical oscillator, leading to a stationary state centred at the minimum of the potential, which becomes the ground state in the weak measurement limit. Remarkably, this stabilisation can be achieved using a fixed generator of feedback that is determined by the asymptotic values of the second-order moments of the steady state. In addition, we demonstrate that appropriate feedback adds a quadratic term in the measured observable to the Hamiltonian of the system. Moreover, we provide an argument for the possibility to cool systems with arbitrary potentials, provided that the measurement is strong enough to localise the particle on an interval smaller than the characteristic length scale of the potential.