Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2409.07421 · Nature Communications

Laser activation of single group-IV colour centres in diamond

Xingrui Cheng, Andreas Thurn, Guangzhao Chen, Gareth S. Jones, James E. Bennett, Maddison Coke, Mason Adshead, Cathryn P. Michaels, Osman Balcı, Andrea Carlo Ferrari, Mete Atatüre, Richard J. Curry, Jason M. Smith, Patrick S. Salter, Dorian A. Gangloff

Published Jun 2, 2025• 28 citations
arXivHTMLPDF

Abstract

Abstract Spin-photon interfaces based on group-IV colour centres in diamond offer a promising platform for quantum networks. A key challenge in the field is realising precise single-defect positioning and activation, which is crucial for scalable device fabrication. Here we address this problem by demonstrating a two-step fabrication method for tin vacancy (SnV−) centres that uses site-controlled ion implantation followed by local femtosecond laser annealing with in-situ spectral monitoring. The ion implantation is performed with sub-50 nm resolution and a dosage that is controlled from hundreds of ions down to single ions per site, limited by Poissonian statistics. Using this approach, we successfully demonstrate site-selective creation and modification of single SnV− centres. Our in-situ spectral monitoring opens a window onto materials tuning at the single defect level, and provides new insight into defect structures and dynamics during the annealing process. While demonstrated for SnV− centres, this versatile approach can be readily generalised to other implanted colour centres in diamond and wide-bandgap materials.

DOI
10.1038/s41467-025-60373-5

Related papers

Generation of Tin-Vacancy Centers in Diamond via Shallow Ion Implantation and Subsequent Diamond Overgrowth

Alison E. Rugar, Haiyu Lu, Constantin Dory +5 more

Group IV color centers in diamond have garnered great interest for their potential as optically active solid-state spin qubits. The future utilization of such emitters requires the development of precise site-controlled emitter generation techniques that are compatible with high-quality nanophotonic devices. This task is more challenging for color centers with large group IV impurity atoms, which are otherwise promising because of their predicted long spin coherence times without a dilution refrigerator. For example, when applied to the negatively charged tin-vacancy (SnV – ) center, conventional site-controlled color center generation methods either damage the diamond surface or yield bulk spectra with unexplained features. Here we demonstrate a novel method to generate site-controlled SnV – centers with clean bulk spectra. We shallowly implant Sn ions through a thin implantation mask and subsequently grow a layer of diamond via chemical vapor deposition. This method can be extended to other color centers and integrated with quantum nanophotonic device fabrication.

arXiv:1910.14165•Nano Letters•Feb 7, 2020•71 citations

Photoactivation of Color Centers Induced by CW Laser Irradiation in Ion-Implanted Diamond

Vanna Pugliese, Elena Nieto Hernández, Emilio Corte +4 more

Split-vacancy color centers in diamonds are promising solid-state platforms for the implementation of photonic quantum technologies. These luminescent defects are commonly fabricated upon low-energy ion implantation and subsequent thermal annealing. Their technological uptake will require the availability of reliable methods for the controlled, large-scale production of localized individual photon emitters. This task is partially achieved by controlled ion implantation to introduce selected impurities in the host material and requires the development of challenging beam focusing or collimation procedures coupled with single-ion detection techniques. We report on the protocol for the direct optical activation of split-vacancy color centers in diamond via localized processing with a continuous-wave laser at mW optical powers. We demonstrate the activation of photoluminescent Mg- and Sn-related centers at both the ensemble and single-photon emitter levels in ion-implanted, high-purity diamond crystals without further thermal processing. The proposed lithographic method enables the activation of individual color centers at specific positions of a large-area sample by means of a relatively inexpensive equipment offering real-time, in situ monitoring of the process.

arXiv:2409.06359•ACS Photonics•Jul 1, 2025•7 citations

Screening and engineering of colour centres in diamond

Tobias Lühmann, Nicole Raatz, Roger John +11 more

Abstract We present a high throughput and systematic method for the screening of colour centres in diamond with the aim of searching for and reproducibly creating new optical centres down to the single defect level, potentially of interest for a wide range of diamond-based quantum applications. The screening method presented here should, moreover, help to identify some already indexed defects among hundreds in diamond (Zaitsev 2001 Optical Properties of Diamond (Berlin: Springer)) but also some promising defects of a still unknown nature, such as the recently discovered ST1 centre (Lee et al 2013 Nat. Nanotechnol . 8 487; John et al 2017 New J. Phys . 19 053008). We use ion implantation in a systematic manner to implant several chemical elements. Ion implantation has the advantage of addressing single atoms inside the bulk with defined depth and high lateral resolution, but the disadvantage of producing intrinsic defects. The implanted samples are annealed in vacuum at different temperatures (between 600 °C and 1600 °C with 200 °C steps) and fully characterised at each step in order to follow the evolution of the defects: formation, dissociation, diffusion, re-formation and charge state, at the ensemble level and, if possible, at the single centre level. We review the unavoidable ion implantation defects (such as the GR1 and 3H centres), discuss ion channeling and thermal annealing and estimate the diffusion of the vacancies, nitrogen and hydrogen. We use different characterisation methods best suited for our study (from widefield fluorescence down to sub-diffraction optical imaging of single centres) and discuss reproducibility issues due to diamond and defect inhomogeneities. Nitrogen is also implanted for reference, taking advantage of the considerable knowledge on NV centres as a versatile sensor in order to retrieve or deduce the conditions and local environment in which the different implanted chemical elements are embedded. We show here the preliminary promising results of a long-term study and focus on the elements O, Mg, Ca, F and P from which fluorescent centres were found.

Journal of Physics D Applied Physics•Sep 7, 2018•96 citations

Fabrication of Tin vacancy centers in nanodiamonds

Hideaki Takashima, Konosuke Shimazaki, Abe Hiroshi +2 more

Nanodiamonds with color centers have recently become a focus of photonic quantum information technologies. Among the various vacancies in diamonds, Tin vacancy (SnV) centers have promising properties[3], such as high brightness, high emission efficiency (60%) from a zero-phonon line (ZPL) at about 620 nm, lifetime-limited linewidths, and a long coherence time of the electronic spin. A reported method for fabricating nanodiamonds, including SnV centers, is the synthesis by microwave plasma chemical vapor deposition[4]. In this method, inorganic compounds were used to introduce a layer of oxides and chlorides that serve Sn ions. However, this method would be difficult to precisely control both the size of the nanodiamonds and the number of defect centers. Here, we report an alternative approach for creating SnV centers in nanodiamonds using ion implantation. We use type-Ib diamond monocrystalline suspension (MSY 0.05, purchased from Microdiamant). Small amounts of the suspension are spin-coated several times on substrates. Sn ions are implanted into the samples with an energy of 800 KeV and ion fluence of 1014 ions/cm2. We then anneal the implanted samples in a high vacuum for about 20 hours at 1200oC. After annealing, the samples are heated at about 500 degrees to remove the sp2 carbon layer on the surface. Finally, the nanodiamonds are transferred to silica substrates. We use a confocal microscope system for the optical measurement. A continuous-wave laser (λ=520 nm) is used to excite the SnV centers in the nanodiamonds. The laser's excitation power is about 10 mW. The laser beam is focused on the nanodiamonds with an objective lens with a numerical aperture of 0.95. The samples are scanned at a step size of 200 nm using a three-axis piezo actuator. The fluorescence is collected with the same objective lens and measured by a single-photon counting module and a spectrometer.

•Nov 19, 2024•0 citations

Single-Photon Emitters in Lead-Implanted Single-Crystal Diamond

Sviatoslav Ditalia Tchernij, Tobias Lühmann, Tobias Herzig +14 more

Abstract We report on the creation and characterization of Pb-related color centers in diamond upon ion implantation and subsequent thermal annealing. Their optical emission in the photoluminescence (PL) regime consists of an articulated spectrum with intense emission peaks at 552.1 and 556.8 nm, accompanied by a set of additional lines in the 535–700 nm range. The attribution of the PL emission to stable Pb-based defects is corroborated by the correlation of its intensity with the implantation fluence of Pb ions. PL measurements performed as a function of sample temperature (in the 143–300 K range) and under different excitation wavelengths (i.e., 532, 514, 405 nm) suggest that the complex spectral features observed in Pb-implanted diamond might be related to a variety of different defects and/or charge states. The emission of the 552.1 and 556.8 nm lines is reported at the single-photon emitter level, demonstrating that they originate from the same individual defect. This work follows from previous reports on optically active centers in diamond based on group-IV impurities, such as Si, Ge, and Sn. In perspective, a comprehensive study of this set of defect complexes could bring significant insight on the common features involved in their formation and opto-physical properties, thus offering a basis for the development of a new generation of quantum-optical devices.

arXiv:1806.01608•ACS Photonics•Nov 12, 2018•107 citations

Creation of Single Tin-Vacancy Color Centers in Small Nanodiamonds

Hideaki Takashima, Konosuke Shimazaki, Hiroshi Abe +2 more

Nanodiamonds containing single tin-vacancy (SnV) centers have the potential for integration into nanophotonic devices employed in quantum technologies such as quantum sensing, quantum information processing and quantum communication. The present study assessed single SnV centers in nanodiamonds less than 10 nm in size. Such centers were generated by implanting Sn ions into size-selected small nanodiamonds followed by high-temperature annealing. A sharp emission peak with a line width of 2.6 nm was observed at 618.7 nm, corresponding to the zero phonon line of SnV centers in bulk diamond. The Debye–Waller factor for this peak at room temperature was estimated to be 0.38 and so was slightly greater than the value for bulk diamond. A second-order correlation function yielded a g 2 (0) value of 0.04 ± 0.11, indicating single-photon emission. The successful creation of single SnV centers in nanodiamonds is a critical step toward integrating nanophotonic devices for photonic quantum technologies.

ACS Photonics•Aug 13, 2025•5 citations
Abstract Spin-photon interfaces based on group-IV colour centres in diamond offer a promising platform for quantum networks. A key challenge in the field is realising precise single-defect positioning and activation, which is crucial for scalable device fabrication. Here we address this problem by demonstrating a two-step fabrication method for tin vacancy (SnV−) centres that uses site-controlled ion implantation followed by local femtosecond laser annealing with in-situ spectral monitoring. The ion implantation is performed with sub-50 nm resolution and a dosage that is controlled from hundreds of ions down to single ions per site, limited by Poissonian statistics. Using this approach, we successfully demonstrate site-selective creation and modification of single SnV− centres. Our in-situ spectral monitoring opens a window onto materials tuning at the single defect level, and provides new insight into defect structures and dynamics during the annealing process. While demonstrated for SnV− centres, this versatile approach can be readily generalised to other implanted colour centres in diamond and wide-bandgap materials.
Group IV color centers in diamond have garnered great interest for their potential as optically active solid-state spin qubits. The future utilization of such emitters requires the development of precise site-controlled emitter generation techniques that are compatible with high-quality nanophotonic devices. This task is more challenging for color centers with large group IV impurity atoms, which are otherwise promising because of their predicted long spin coherence times without a dilution refrigerator. For example, when applied to the negatively charged tin-vacancy (SnV – ) center, conventional site-controlled color center generation methods either damage the diamond surface or yield bulk spectra with unexplained features. Here we demonstrate a novel method to generate site-controlled SnV – centers with clean bulk spectra. We shallowly implant Sn ions through a thin implantation mask and subsequently grow a layer of diamond via chemical vapor deposition. This method can be extended to other color centers and integrated with quantum nanophotonic device fabrication.
Split-vacancy color centers in diamonds are promising solid-state platforms for the implementation of photonic quantum technologies. These luminescent defects are commonly fabricated upon low-energy ion implantation and subsequent thermal annealing. Their technological uptake will require the availability of reliable methods for the controlled, large-scale production of localized individual photon emitters. This task is partially achieved by controlled ion implantation to introduce selected impurities in the host material and requires the development of challenging beam focusing or collimation procedures coupled with single-ion detection techniques. We report on the protocol for the direct optical activation of split-vacancy color centers in diamond via localized processing with a continuous-wave laser at mW optical powers. We demonstrate the activation of photoluminescent Mg- and Sn-related centers at both the ensemble and single-photon emitter levels in ion-implanted, high-purity diamond crystals without further thermal processing. The proposed lithographic method enables the activation of individual color centers at specific positions of a large-area sample by means of a relatively inexpensive equipment offering real-time, in situ monitoring of the process.
Abstract We present a high throughput and systematic method for the screening of colour centres in diamond with the aim of searching for and reproducibly creating new optical centres down to the single defect level, potentially of interest for a wide range of diamond-based quantum applications. The screening method presented here should, moreover, help to identify some already indexed defects among hundreds in diamond (Zaitsev 2001 Optical Properties of Diamond (Berlin: Springer)) but also some promising defects of a still unknown nature, such as the recently discovered ST1 centre (Lee et al 2013 Nat. Nanotechnol . 8 487; John et al 2017 New J. Phys . 19 053008). We use ion implantation in a systematic manner to implant several chemical elements. Ion implantation has the advantage of addressing single atoms inside the bulk with defined depth and high lateral resolution, but the disadvantage of producing intrinsic defects. The implanted samples are annealed in vacuum at different temperatures (between 600 °C and 1600 °C with 200 °C steps) and fully characterised at each step in order to follow the evolution of the defects: formation, dissociation, diffusion, re-formation and charge state, at the ensemble level and, if possible, at the single centre level. We review the unavoidable ion implantation defects (such as the GR1 and 3H centres), discuss ion channeling and thermal annealing and estimate the diffusion of the vacancies, nitrogen and hydrogen. We use different characterisation methods best suited for our study (from widefield fluorescence down to sub-diffraction optical imaging of single centres) and discuss reproducibility issues due to diamond and defect inhomogeneities. Nitrogen is also implanted for reference, taking advantage of the considerable knowledge on NV centres as a versatile sensor in order to retrieve or deduce the conditions and local environment in which the different implanted chemical elements are embedded. We show here the preliminary promising results of a long-term study and focus on the elements O, Mg, Ca, F and P from which fluorescent centres were found.
Nanodiamonds with color centers have recently become a focus of photonic quantum information technologies. Among the various vacancies in diamonds, Tin vacancy (SnV) centers have promising properties[3], such as high brightness, high emission efficiency (60%) from a zero-phonon line (ZPL) at about 620 nm, lifetime-limited linewidths, and a long coherence time of the electronic spin. A reported method for fabricating nanodiamonds, including SnV centers, is the synthesis by microwave plasma chemical vapor deposition[4]. In this method, inorganic compounds were used to introduce a layer of oxides and chlorides that serve Sn ions. However, this method would be difficult to precisely control both the size of the nanodiamonds and the number of defect centers. Here, we report an alternative approach for creating SnV centers in nanodiamonds using ion implantation. We use type-Ib diamond monocrystalline suspension (MSY 0.05, purchased from Microdiamant). Small amounts of the suspension are spin-coated several times on substrates. Sn ions are implanted into the samples with an energy of 800 KeV and ion fluence of 1014 ions/cm2. We then anneal the implanted samples in a high vacuum for about 20 hours at 1200oC. After annealing, the samples are heated at about 500 degrees to remove the sp2 carbon layer on the surface. Finally, the nanodiamonds are transferred to silica substrates. We use a confocal microscope system for the optical measurement. A continuous-wave laser (λ=520 nm) is used to excite the SnV centers in the nanodiamonds. The laser's excitation power is about 10 mW. The laser beam is focused on the nanodiamonds with an objective lens with a numerical aperture of 0.95. The samples are scanned at a step size of 200 nm using a three-axis piezo actuator. The fluorescence is collected with the same objective lens and measured by a single-photon counting module and a spectrometer.
Abstract We report on the creation and characterization of Pb-related color centers in diamond upon ion implantation and subsequent thermal annealing. Their optical emission in the photoluminescence (PL) regime consists of an articulated spectrum with intense emission peaks at 552.1 and 556.8 nm, accompanied by a set of additional lines in the 535–700 nm range. The attribution of the PL emission to stable Pb-based defects is corroborated by the correlation of its intensity with the implantation fluence of Pb ions. PL measurements performed as a function of sample temperature (in the 143–300 K range) and under different excitation wavelengths (i.e., 532, 514, 405 nm) suggest that the complex spectral features observed in Pb-implanted diamond might be related to a variety of different defects and/or charge states. The emission of the 552.1 and 556.8 nm lines is reported at the single-photon emitter level, demonstrating that they originate from the same individual defect. This work follows from previous reports on optically active centers in diamond based on group-IV impurities, such as Si, Ge, and Sn. In perspective, a comprehensive study of this set of defect complexes could bring significant insight on the common features involved in their formation and opto-physical properties, thus offering a basis for the development of a new generation of quantum-optical devices.
Nanodiamonds containing single tin-vacancy (SnV) centers have the potential for integration into nanophotonic devices employed in quantum technologies such as quantum sensing, quantum information processing and quantum communication. The present study assessed single SnV centers in nanodiamonds less than 10 nm in size. Such centers were generated by implanting Sn ions into size-selected small nanodiamonds followed by high-temperature annealing. A sharp emission peak with a line width of 2.6 nm was observed at 618.7 nm, corresponding to the zero phonon line of SnV centers in bulk diamond. The Debye–Waller factor for this peak at room temperature was estimated to be 0.38 and so was slightly greater than the value for bulk diamond. A second-order correlation function yielded a g 2 (0) value of 0.04 ± 0.11, indicating single-photon emission. The successful creation of single SnV centers in nanodiamonds is a critical step toward integrating nanophotonic devices for photonic quantum technologies.