Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2409.00833 · The European Physical Journal Plus

Near infrared quantum ghost spectroscopy for threats detection

Andrea Chiuri, F. Angelini, Ilaria Gianani, Simone Santoro, Linda Sansoni, Eleonora Stefanutti, Marco Barbieri

Published Mar 3, 2025• 4 citations
arXivHTMLPDF

Abstract

Abstract Quantum sensing is a rapidly growing branch of research within the area of quantum science and technology offering key resources, beyond classical ones, with potential for commercialization of novel (quantum) sensors. The exploitation of quantum resources offered by photons can boost the performance of quantum sensors for innovative and challenging applications. In this paper, we build on the idea that quantum ghost spectroscopy (QGS), i.e. the counterpart in the frequency domain of quantum ghost imaging (QGI), can target specific applications in the detection of possible threats. This is implemented by exploiting the opportunities offered by quantum optics, i.e. the generation of photon pairs characterized by spectral correlations. We will discuss our main results obtained with pure QGS experiments showing that it is possible to assess the presence of a target dealing with a low resources measurement. The time-frequency domain reveals a huge potential for several applications, and frequency correlations represent a versatile tool that can be exploited to enable the spectral analysis of objects where a direct measurement would not be feasible (e.g. due to security). The use of non-degenerate sources of correlated photons allowed to reveal spectral features in the near-infrared wavelengths employing the usual detectors for the visible region, showing the effectiveness of this technique.

DOI
10.1140/epjp/s13360-025-06041-5

Related papers

Quantum Ghost Imaging of Remote Targets With Novel SPAD Technology

Alessia Suprano, Massimiliano Proietti, Francesco Poggiali +9 more

Low-light-level imaging in the infrared regime could find applications in areas ranging from technological to biological. Still, its development is limited by the inefficiency of silicon-based detectors in this regime. Quantum Ghost Imaging (QGI) can address this limitation by allowing the separation of illumination and imaging [1]. This is accomplished by generating non-degenerate correlated photon pairs, whose infrared photon probes the object and is detected by an InGaAs bucket detector, while the spatial distribution of the visible one is collected by a single-photon sensitive silicon camera. Traditional QGI setups evaluate photon correlations through “heralding”, by triggering the camera upon idler detection and thus require an image-preserving delay-line, which limits their use for remote sensing [1]. In asynchronous QGI (aQGI) cameras are replaced with SPAD arrays [2] able to record photon timestamp with picoseconds precision. By identifying pairs through timestamps comparison, the mentioned limitations are resolved [3], enabling applications with reflective or diffusive objects where the timestamp delay depends on the object's position. In this work, we propose and demonstrate an experimental QGI setup for remote sensing in reflection configuration (Fig. 1). Collinear non-degenerate pairs of single-photons at 550 nm and 1550 nm are generated by pumping a 2 mm-long type-0 ppKTP crystal with a 405 nm laser. To enable imaging of objects at varying distances, we implemented a momentum-correlation-based setup. Infrared photons interacting with the object were collected by commercially available InGaAs SPAD detectors, while the visible photons were directly captured using a prototype silicon SPAD array developed by Politecnico di Milano [4]. It is based on a 32×32 SPAD, with in-pixel TDCs, and on-chip microlenses are employed to reach a fill factor of 78%. The time resolution is adjustable down to 250 ps, with 1 μs Full Scale Range (FSR). The measurement duty cycle (i.e. the ration of the TDC FSR and the frame time) can be increased with a multi-gate acquisition scheme. To validate the efficiency of our setup, we tested it using a proof-of-principle object, as shown in Fig. 1b. The reconstructed images, captured with the object placed at 30 cm intervals in an acquisition time of only 30 s, are shown in Fig. 1c. In summary, the shown results confirm the potential of the proposed setup for remote sensing applications, particularly for reflective or diffusive objects. Moreover, the proposed approach could offers the possibility of significantly reduce acquisition times compared to standard QGI setups.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 23, 2025•0 citations

An experimental investigation of quantum frequency correlations resilience against white and colored noise

Linda Sansoni, Eleonora Stefanutti, Andrea Chiuri

Abstract Quantum technologies based on photons rely on correlated pairs generated through nonlinear optics. Hence, understanding the impact of disturbances is of paramount importance for the development of this innovative field. Here we focus on the quantum spectroscopy as one of the most promising quantum technique showing a realistic perspective for a future employment. In this field, the most interesting disturbance is represented by the frequency noise. We present an experiment aimed at testing and characterizing the resilience against different levels of white and colored noise and we include simulations to generalize our findings. With this work we demonstrate that the spectroscopical properties of both the target and the noise, as well as the strength of the quantum correlations, play a crucial role and could have e huge impact on the performances, especially in terms of achievable spectral resolution. Remarkably, the presence of a specific region where the technology is always robust against any kind of noise represents an advantage allowing to deal with optimal measurements and fully exploit the capabilities of this technology.

arXiv:2503.16314•Quantum Science and Technology•Aug 5, 2025•0 citations

Theoretic approach to ghost imaging in the frequency domain performed by means of a high brilliance coherent monochromatic source

Marco Chiarini, Alberto Parini, Francesca Braglia +6 more

Ghost imaging is a novel non-conventional technique allowing to generate high resolution images by correlating the intensity of two light beams, neither of which independently contains sufficient information about the spatial distribution and shape of the object. The first demonstration of ghost imaging used light in double photon state, obtained from spontaneous parametric down-conversion. Owing to the entanglement of the source photons, the proposed theory required quantum descriptions for both the optical source and its photo-detection statistics1. However, subsequent experimental and theoretical considerations2,3 demonstrated that ghost imaging can be performed also with thermalized light, utilizing either CCD detector arrays or photon-counting detectors, thus admitting to a semi-classical description, employing classical fields and shot-noise limited detectors. This has generated increasing interest4-6 in establishing a unifying theory that characterizes the fundamental physics of ghost imaging and defines the boundary between classical and quantum domains. In this view, we exploited recent progress obtained through the application of Fourier Transform Techniques to demonstrate ghost imaging in the frequency domain, in order to measure a continuous spectrum by using a highly brilliant and coherent monochromatic source. In particular, we demonstrate the application of this ghost imaging technique to broadband spectroscopic measurements by means of interaction free photon detection. The experimental apparatus and the collected data are described in a dedicated work7. In this paper, we consider the theoretical aspects underlying the proposed Spectroscopic technique. In particular, two alternative theoretical models are presented. In one case, a statistical approach (semi-classical) is applied, where the states of the sampling beam are considered, whereas in the other case a pure quantum treatment is carried on, by describing the interaction of vacuum states generated by photon conversion processes. Both theoretical models, though carried on by means of a complementary formalism, lead to equivalent results and offer a physical interpretation of the collected experimental data. The application of these results offer novel perspectives for remote sensing in low light conditions, or in spectral regions where sensitive detectors are lacking.

Electro-Optical and Infrared Systems: Technology and Applications•Oct 9, 2019•1 citation

3D quantum ghost imaging

Carsten Pitsch, Dominik Walter, Helge Bürsing +1 more

Quantum Ghost Imaging (QGI) is a scheme which uses the temporal correlation of entangled photon pairs (signal and idler) to identify detections belonging to actual entangled pairs and separate them from uncorrelated detections. By also exploiting the spatial correlation of the photon pair, this identification allows to extract image information of the idler photons by imaging the signal photons. This can even be done for non-degenerate photon pairs, allowing imaging at wavelengths without sophisticated cameras in this regime. Recent advances in detector technology, especially single photon avalanche diodes (SPADs), allow the design for new cameras capable of single photon detection with both high spatial and temporal resolution. These new detectors are especially useful for application in QGI, allowing to detect each photon individually and identify the correlated pairs after the measurement. It further allows to analyse the time-of-flight of photons and thus enables 3D imaging, the first realization of which will be presented here.

Emerging Imaging and Sensing Technologies for Security and Defence•Oct 17, 2023•1 citation

Ghost imaging as loss estimation: Quantum versus classical schemes

Andrea Chiuri, Ilaria Gianani, Valeria Cimini +3 more

Frequency correlations are a versatile and powerful tool which can be exploited to perform spectral analysis of objects whose direct measurement might be unfeasible. This is achieved through a so-called ghost spectrometer that can be implemented with quantum and classical resources alike. While there are some known advantages associated to either choice, an analysis of their metrological capabilities has not yet been performed. Here we report on the metrological comparison between a quantum and a classical ghost spectrometer. We perform the estimation of the transmittivity of a bandpass filter using frequency-entangled photon pairs. Our results show that a quantum advantage is achievable, depending on the values of the transmittivity and on the number of frequency modes analyzed.

arXiv:2105.09728•Physical Review A•Jan 5, 2022•14 citations

Quantum ghost imaging

Morris, Peter A.

The process of image recording is arguably one of the most prevalent technology in modern society and continues to inspire vast swathes of research due to its widespread applications spanning military, medical and consumer spheres. The danger present in a field so broad is that separate niches of research can become isolated with critical advancements struggling to traverse the gulfs between. Unifying the field is the omnipresent drive to acquire an ever increasing quality of images at the lowest possible cost, a goal which warrants continual fundamental research. Quantum entanglement exhibits many intriguing characteristics which make it a suitable tool for such fundamental investigations. The process of spontaneous parametric down- conversion has offered a yet unbeaten strength of photon correlations with the quantum nature of their production providing a reliable and controllable source of single-photons. Arising from these attributes is the technique known as ghost imaging. Though now known to be classically possible, the strength of entanglement generated correlations is yet to be surpassed. This thesis implemented this technique in tandem with the cutting edge detector technology in order to probe the fundamentals of image formation. This form of imaging allowed us to subject an object to a known number of photons whilst acquiring structural information from spatially separate, correlated photons which never interact with the object. The strength of the produced correlations allow us to acquire low background, high resolution images with far less light than traditional techniques and affords many novel benefits. The possibility of incorporating this technique with pre-existent regimes allowed me to draw from advancements made across the landscape of imaging research. Although referred to as “quantum ghost imaging” throughout this work, it should be noted that the intrinsic quantum nature of the correlations was not directly relied upon but provided an ideal source of strongly correlated photons. In order to determine the limits of a traditional imaging system this thesis first sought to answer the question: “can an image of an object be reconstructed from fewer photons than ii pixels in the image?” In chapter 3 I approached this from the perspective of compression, which minimises redundant information within a signal. This lead to the development of an imaging regime capable of imaging with far fewer photons than pixels in the image. By employing assumptions about the sparsity of natural images I was able to reconstruct an image of a biological sample containing an average of less than one photon per image pixel. Having reduced the number of photons necessary to form an image I then considered alternative methods for reducing the optical energy impinging on a sample. I sought to answer the question: “can non-degenerate ghost imaging reduce the optical energy impinged upon an object during imaging”. The photons produced in SPDC need not be of similar wavelengths, however may be chosen far from degeneracy, i.e. non-degenerate. In Chapter 4 I presented a ghost imaging system which illuminated the object with infrared light whilst recording the structural information via entangled visible photons. This allowed for objects opaque to visible light to be imaged in high quality without the need for a spatially resolving infrared detector, the state of the art of which lags behind their silicon based visible counterparts. I presented the systems capabilities by imaging objects which were etched into a gold substrate layered on to silicon, both of which are opaque to visible light. Not only did a reduction in energy deposition arise from the lower energy probe wavelength but applying the reconstruction techniques from the previous chapter brought that down to as low as ≈16 nJcm−2s−1. Seeking to expand the repertoire of applications, the low-light capabilities of my ghost imaging were applied to the technique of phase-contrast microscopy in chapter 5. Typically applied to translucent objects, phase-contrast imaging transfers phase information, i.e. the refractive index changed within the object, into an intensity distribution through the use of a phase-filter. In many of these applications the objects tend to be biological in nature, where high optical exposure can result in bleaching or damage. By applying the phase-filter non- locally, i.e. to the photons correlated to those probing the object, I acquired edge-enhanced images of a phase object whilst illuminating with significantly fewer photons than standard phase-contrast techniques. Having displayed the broad applicability of our low-light ghost imaging system, I then sought to determine the optical resolution in chapter 6. The resolution limits of ghost imaging are not clear at first glance owing to the resolutions dependence upon the strength of spatial correlations. As the length over which the spatial correlations are produced can be brought below the standard diffraction limit, it would seem the resolution of the system could be brought similarly low. To clarify this I artificially restricted the number of spatial modes in each of the correlated beams to uncover the physically realisable resolution. I show that although the resolution of a ghost imaging system to be fundamentally determined by the strength of the correlations, this can never be reached due to the inherent limitations of the intervening imaging system.

•Jan 1, 2018•0 citations
Abstract Quantum sensing is a rapidly growing branch of research within the area of quantum science and technology offering key resources, beyond classical ones, with potential for commercialization of novel (quantum) sensors. The exploitation of quantum resources offered by photons can boost the performance of quantum sensors for innovative and challenging applications. In this paper, we build on the idea that quantum ghost spectroscopy (QGS), i.e. the counterpart in the frequency domain of quantum ghost imaging (QGI), can target specific applications in the detection of possible threats. This is implemented by exploiting the opportunities offered by quantum optics, i.e. the generation of photon pairs characterized by spectral correlations. We will discuss our main results obtained with pure QGS experiments showing that it is possible to assess the presence of a target dealing with a low resources measurement. The time-frequency domain reveals a huge potential for several applications, and frequency correlations represent a versatile tool that can be exploited to enable the spectral analysis of objects where a direct measurement would not be feasible (e.g. due to security). The use of non-degenerate sources of correlated photons allowed to reveal spectral features in the near-infrared wavelengths employing the usual detectors for the visible region, showing the effectiveness of this technique.
Low-light-level imaging in the infrared regime could find applications in areas ranging from technological to biological. Still, its development is limited by the inefficiency of silicon-based detectors in this regime. Quantum Ghost Imaging (QGI) can address this limitation by allowing the separation of illumination and imaging [1]. This is accomplished by generating non-degenerate correlated photon pairs, whose infrared photon probes the object and is detected by an InGaAs bucket detector, while the spatial distribution of the visible one is collected by a single-photon sensitive silicon camera. Traditional QGI setups evaluate photon correlations through “heralding”, by triggering the camera upon idler detection and thus require an image-preserving delay-line, which limits their use for remote sensing [1]. In asynchronous QGI (aQGI) cameras are replaced with SPAD arrays [2] able to record photon timestamp with picoseconds precision. By identifying pairs through timestamps comparison, the mentioned limitations are resolved [3], enabling applications with reflective or diffusive objects where the timestamp delay depends on the object's position. In this work, we propose and demonstrate an experimental QGI setup for remote sensing in reflection configuration (Fig. 1). Collinear non-degenerate pairs of single-photons at 550 nm and 1550 nm are generated by pumping a 2 mm-long type-0 ppKTP crystal with a 405 nm laser. To enable imaging of objects at varying distances, we implemented a momentum-correlation-based setup. Infrared photons interacting with the object were collected by commercially available InGaAs SPAD detectors, while the visible photons were directly captured using a prototype silicon SPAD array developed by Politecnico di Milano [4]. It is based on a 32×32 SPAD, with in-pixel TDCs, and on-chip microlenses are employed to reach a fill factor of 78%. The time resolution is adjustable down to 250 ps, with 1 μs Full Scale Range (FSR). The measurement duty cycle (i.e. the ration of the TDC FSR and the frame time) can be increased with a multi-gate acquisition scheme. To validate the efficiency of our setup, we tested it using a proof-of-principle object, as shown in Fig. 1b. The reconstructed images, captured with the object placed at 30 cm intervals in an acquisition time of only 30 s, are shown in Fig. 1c. In summary, the shown results confirm the potential of the proposed setup for remote sensing applications, particularly for reflective or diffusive objects. Moreover, the proposed approach could offers the possibility of significantly reduce acquisition times compared to standard QGI setups.
Abstract Quantum technologies based on photons rely on correlated pairs generated through nonlinear optics. Hence, understanding the impact of disturbances is of paramount importance for the development of this innovative field. Here we focus on the quantum spectroscopy as one of the most promising quantum technique showing a realistic perspective for a future employment. In this field, the most interesting disturbance is represented by the frequency noise. We present an experiment aimed at testing and characterizing the resilience against different levels of white and colored noise and we include simulations to generalize our findings. With this work we demonstrate that the spectroscopical properties of both the target and the noise, as well as the strength of the quantum correlations, play a crucial role and could have e huge impact on the performances, especially in terms of achievable spectral resolution. Remarkably, the presence of a specific region where the technology is always robust against any kind of noise represents an advantage allowing to deal with optimal measurements and fully exploit the capabilities of this technology.
Ghost imaging is a novel non-conventional technique allowing to generate high resolution images by correlating the intensity of two light beams, neither of which independently contains sufficient information about the spatial distribution and shape of the object. The first demonstration of ghost imaging used light in double photon state, obtained from spontaneous parametric down-conversion. Owing to the entanglement of the source photons, the proposed theory required quantum descriptions for both the optical source and its photo-detection statistics1. However, subsequent experimental and theoretical considerations2,3 demonstrated that ghost imaging can be performed also with thermalized light, utilizing either CCD detector arrays or photon-counting detectors, thus admitting to a semi-classical description, employing classical fields and shot-noise limited detectors. This has generated increasing interest4-6 in establishing a unifying theory that characterizes the fundamental physics of ghost imaging and defines the boundary between classical and quantum domains. In this view, we exploited recent progress obtained through the application of Fourier Transform Techniques to demonstrate ghost imaging in the frequency domain, in order to measure a continuous spectrum by using a highly brilliant and coherent monochromatic source. In particular, we demonstrate the application of this ghost imaging technique to broadband spectroscopic measurements by means of interaction free photon detection. The experimental apparatus and the collected data are described in a dedicated work7. In this paper, we consider the theoretical aspects underlying the proposed Spectroscopic technique. In particular, two alternative theoretical models are presented. In one case, a statistical approach (semi-classical) is applied, where the states of the sampling beam are considered, whereas in the other case a pure quantum treatment is carried on, by describing the interaction of vacuum states generated by photon conversion processes. Both theoretical models, though carried on by means of a complementary formalism, lead to equivalent results and offer a physical interpretation of the collected experimental data. The application of these results offer novel perspectives for remote sensing in low light conditions, or in spectral regions where sensitive detectors are lacking.
Quantum Ghost Imaging (QGI) is a scheme which uses the temporal correlation of entangled photon pairs (signal and idler) to identify detections belonging to actual entangled pairs and separate them from uncorrelated detections. By also exploiting the spatial correlation of the photon pair, this identification allows to extract image information of the idler photons by imaging the signal photons. This can even be done for non-degenerate photon pairs, allowing imaging at wavelengths without sophisticated cameras in this regime. Recent advances in detector technology, especially single photon avalanche diodes (SPADs), allow the design for new cameras capable of single photon detection with both high spatial and temporal resolution. These new detectors are especially useful for application in QGI, allowing to detect each photon individually and identify the correlated pairs after the measurement. It further allows to analyse the time-of-flight of photons and thus enables 3D imaging, the first realization of which will be presented here.
Frequency correlations are a versatile and powerful tool which can be exploited to perform spectral analysis of objects whose direct measurement might be unfeasible. This is achieved through a so-called ghost spectrometer that can be implemented with quantum and classical resources alike. While there are some known advantages associated to either choice, an analysis of their metrological capabilities has not yet been performed. Here we report on the metrological comparison between a quantum and a classical ghost spectrometer. We perform the estimation of the transmittivity of a bandpass filter using frequency-entangled photon pairs. Our results show that a quantum advantage is achievable, depending on the values of the transmittivity and on the number of frequency modes analyzed.
The process of image recording is arguably one of the most prevalent technology in modern society and continues to inspire vast swathes of research due to its widespread applications spanning military, medical and consumer spheres. The danger present in a field so broad is that separate niches of research can become isolated with critical advancements struggling to traverse the gulfs between. Unifying the field is the omnipresent drive to acquire an ever increasing quality of images at the lowest possible cost, a goal which warrants continual fundamental research. Quantum entanglement exhibits many intriguing characteristics which make it a suitable tool for such fundamental investigations. The process of spontaneous parametric down- conversion has offered a yet unbeaten strength of photon correlations with the quantum nature of their production providing a reliable and controllable source of single-photons. Arising from these attributes is the technique known as ghost imaging. Though now known to be classically possible, the strength of entanglement generated correlations is yet to be surpassed. This thesis implemented this technique in tandem with the cutting edge detector technology in order to probe the fundamentals of image formation. This form of imaging allowed us to subject an object to a known number of photons whilst acquiring structural information from spatially separate, correlated photons which never interact with the object. The strength of the produced correlations allow us to acquire low background, high resolution images with far less light than traditional techniques and affords many novel benefits. The possibility of incorporating this technique with pre-existent regimes allowed me to draw from advancements made across the landscape of imaging research. Although referred to as “quantum ghost imaging” throughout this work, it should be noted that the intrinsic quantum nature of the correlations was not directly relied upon but provided an ideal source of strongly correlated photons. In order to determine the limits of a traditional imaging system this thesis first sought to answer the question: “can an image of an object be reconstructed from fewer photons than ii pixels in the image?” In chapter 3 I approached this from the perspective of compression, which minimises redundant information within a signal. This lead to the development of an imaging regime capable of imaging with far fewer photons than pixels in the image. By employing assumptions about the sparsity of natural images I was able to reconstruct an image of a biological sample containing an average of less than one photon per image pixel. Having reduced the number of photons necessary to form an image I then considered alternative methods for reducing the optical energy impinging on a sample. I sought to answer the question: “can non-degenerate ghost imaging reduce the optical energy impinged upon an object during imaging”. The photons produced in SPDC need not be of similar wavelengths, however may be chosen far from degeneracy, i.e. non-degenerate. In Chapter 4 I presented a ghost imaging system which illuminated the object with infrared light whilst recording the structural information via entangled visible photons. This allowed for objects opaque to visible light to be imaged in high quality without the need for a spatially resolving infrared detector, the state of the art of which lags behind their silicon based visible counterparts. I presented the systems capabilities by imaging objects which were etched into a gold substrate layered on to silicon, both of which are opaque to visible light. Not only did a reduction in energy deposition arise from the lower energy probe wavelength but applying the reconstruction techniques from the previous chapter brought that down to as low as ≈16 nJcm−2s−1. Seeking to expand the repertoire of applications, the low-light capabilities of my ghost imaging were applied to the technique of phase-contrast microscopy in chapter 5. Typically applied to translucent objects, phase-contrast imaging transfers phase information, i.e. the refractive index changed within the object, into an intensity distribution through the use of a phase-filter. In many of these applications the objects tend to be biological in nature, where high optical exposure can result in bleaching or damage. By applying the phase-filter non- locally, i.e. to the photons correlated to those probing the object, I acquired edge-enhanced images of a phase object whilst illuminating with significantly fewer photons than standard phase-contrast techniques. Having displayed the broad applicability of our low-light ghost imaging system, I then sought to determine the optical resolution in chapter 6. The resolution limits of ghost imaging are not clear at first glance owing to the resolutions dependence upon the strength of spatial correlations. As the length over which the spatial correlations are produced can be brought below the standard diffraction limit, it would seem the resolution of the system could be brought similarly low. To clarify this I artificially restricted the number of spatial modes in each of the correlated beams to uncover the physically realisable resolution. I show that although the resolution of a ghost imaging system to be fundamentally determined by the strength of the correlations, this can never be reached due to the inherent limitations of the intervening imaging system.