Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2408.16869 · Journal of Applied Physics

Josephson traveling wave parametric amplifiers with plasma oscillation phase matching

Emil Rizvanov, Samuel Kern, P. Neilinger, M. Grajcar

Published Nov 6, 2024• 4 citations
arXivHTMLPDF

Abstract

High gain and large bandwidth of traveling-wave parametric amplifier exploiting the nonlinearity of Josephson Junctions can be achieved by fulfilling the so-called phase-matching condition. This condition is usually addressed by placing resonant structures along the waveguide or by periodic modulations of its parameters, creating gaps in the waveguide’s dispersion. Here, we propose to employ the Josephson junctions, which constitute the centerline of the amplifier, as resonant elements for phase matching. By numerical simulations in JoSIM (and WRspice) software, we show that Josephson plasma oscillations can be utilized to create wave vector mismatch sufficient for phase matching as well as to prevent the conversion of the pump energy to higher harmonics. The proposed traveling wave parametric amplifier design has a gain of 15 dB and a 3 GHz bandwidth, which is comparable to the state-of-the-art TWPAs.

DOI
10.1063/5.0236927

Related papers

Resonant Phase Matching of Josephson Junction Traveling Wave Parametric Amplifiers

Kevin P. O’Brien, Chris Macklin, Irfan A. Siddiqi +1 more

We propose a technique to overcome phase mismatch in Josephson-junction traveling wave parametric amplifiers in order to achieve high gain over a broad bandwidth. Using "resonant phase matching," we design a compact superconducting device consisting of a transmission line with subwavelength resonant inclusions that simultaneously achieves a gain of 20 dB, an instantaneous bandwidth of 3 GHz, and a saturation power of -98 dBm. Such an amplifier is well suited to cryogenic broadband microwave measurements such as the multiplexed readout of quantum coherent circuits based on superconducting, semiconducting, or nanomechanical elements, as well as traditional astronomical detectors.

arXiv:1406.2346•Physical Review Letters•Oct 6, 2014•200 citations

Third harmonic-mediated amplification in TWPA

Emil Rizvanov, Samuel Kern, P. Neilinger +1 more

In Josephson traveling-wave parametric amplifiers, higher-order harmonics of the pump tone and its sidebands are commonly present and typically regarded as parasitic. Consequently, most design efforts have focused on suppressing these harmonics. In spite of that, motivated by transient simulations, we extend the coupled-mode theory and demonstrate that the third harmonic can enhance amplifier performance, improving both gain and bandwidth. We show that the recently developed plasma oscillation-based amplifier is particularly well-suited for exploiting this effect. Its dispersion relation enables us to observe the phenomenon in transient numerical simulations using JoSIM and WRspice. These simulations reveal the improvement of the amplifier’s performance, specifically doubling the bandwidth and increasing the gain.

arXiv:2508.05295•Journal of Applied Physics•Feb 18, 2026•0 citations

A dispersion-engineered Josephson travelling wave parametric amplifier with periodic impedance perturbation

K Ratter, B-K Tan

We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.

•Jan 1, 2021•0 citations

Traveling wave parametric amplifier with Josephson junctions using minimal resonator phase matching

T. White, J. Mutus, I.-C. Hoi +18 more

Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance, while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted λ/4 resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12 dB across a 4 GHz span, along with an average saturation power of −92 dBm with noise approaching the quantum limit.

arXiv:1503.04364•Applied Physics Letters•Jun 15, 2015•189 citations

Resonant Phase Matching of Josephson Junction Traveling Wave Parametric Amplifiers

Kevin P. O’Brien, Chris Macklin, Irfan A. Siddiqi +1 more

We propose a technique to phase-match Josephson-junction traveling wave parametric amplifiers to achieve high gain (over twenty decibels) over a broad bandwidth (multiple GHz) for applications such as the multiplexed readout of quantum coherent circuits.

Nonlinear Optics•Jan 1, 2015•2 citations

Design of a uniplanar resonance phase-matched Josephson traveling-wave parametric amplifier

Boon-Kok Tan, G. Yassin

In this paper, we present the design of a resonance phase-matched Josephson travelling-wave parametric amplifier that have a 12 GHz 3 dB-bandwidth centred near 10 GHz. Our design utilises a unilateral planar circuit structure which requires only a single layer of thin superconductor film deposited on a supporting substrate to reduce the fabrication complexity. The nonlinear medium of the device is provided by a series of Josephson junctions embedded in a coplanar waveguide with integrated shunt capacitor, and the dispersion of the transmission line is controlled by quarter wavelength resonators coupled capacitively to the feedline. Here, we describe in detail the electromagnetic designs of the various components of the amplifier, and the coupled-mode equations model that governs the three-wave mixing process. We extract the required circuit parameters of the amplifier through electromagnetic modelling, and determine the parametric gain-bandwidth product of the amplifier using an analytical model. Finally, we discuss the various design aspects that affect the overall performance of the amplifier.

UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies (UCMMT)•Sep 1, 2017•2 citations
High gain and large bandwidth of traveling-wave parametric amplifier exploiting the nonlinearity of Josephson Junctions can be achieved by fulfilling the so-called phase-matching condition. This condition is usually addressed by placing resonant structures along the waveguide or by periodic modulations of its parameters, creating gaps in the waveguide’s dispersion. Here, we propose to employ the Josephson junctions, which constitute the centerline of the amplifier, as resonant elements for phase matching. By numerical simulations in JoSIM (and WRspice) software, we show that Josephson plasma oscillations can be utilized to create wave vector mismatch sufficient for phase matching as well as to prevent the conversion of the pump energy to higher harmonics. The proposed traveling wave parametric amplifier design has a gain of 15 dB and a 3 GHz bandwidth, which is comparable to the state-of-the-art TWPAs.
We propose a technique to overcome phase mismatch in Josephson-junction traveling wave parametric amplifiers in order to achieve high gain over a broad bandwidth. Using "resonant phase matching," we design a compact superconducting device consisting of a transmission line with subwavelength resonant inclusions that simultaneously achieves a gain of 20 dB, an instantaneous bandwidth of 3 GHz, and a saturation power of -98 dBm. Such an amplifier is well suited to cryogenic broadband microwave measurements such as the multiplexed readout of quantum coherent circuits based on superconducting, semiconducting, or nanomechanical elements, as well as traditional astronomical detectors.
In Josephson traveling-wave parametric amplifiers, higher-order harmonics of the pump tone and its sidebands are commonly present and typically regarded as parasitic. Consequently, most design efforts have focused on suppressing these harmonics. In spite of that, motivated by transient simulations, we extend the coupled-mode theory and demonstrate that the third harmonic can enhance amplifier performance, improving both gain and bandwidth. We show that the recently developed plasma oscillation-based amplifier is particularly well-suited for exploiting this effect. Its dispersion relation enables us to observe the phenomenon in transient numerical simulations using JoSIM and WRspice. These simulations reveal the improvement of the amplifier’s performance, specifically doubling the bandwidth and increasing the gain.
We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.
Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance, while allowing for significant increases in both bandwidth and dynamic range. We present a TWPA device based on an LC-ladder transmission line of Josephson junctions and parallel plate capacitors using low-loss amorphous silicon dielectric. Crucially, we have inserted λ/4 resonators at regular intervals along the transmission line in order to maintain the phase matching condition between pump, signal, and idler and increase gain. We achieve an average gain of 12 dB across a 4 GHz span, along with an average saturation power of −92 dBm with noise approaching the quantum limit.
In this paper, we present the design of a resonance phase-matched Josephson travelling-wave parametric amplifier that have a 12 GHz 3 dB-bandwidth centred near 10 GHz. Our design utilises a unilateral planar circuit structure which requires only a single layer of thin superconductor film deposited on a supporting substrate to reduce the fabrication complexity. The nonlinear medium of the device is provided by a series of Josephson junctions embedded in a coplanar waveguide with integrated shunt capacitor, and the dispersion of the transmission line is controlled by quarter wavelength resonators coupled capacitively to the feedline. Here, we describe in detail the electromagnetic designs of the various components of the amplifier, and the coupled-mode equations model that governs the three-wave mixing process. We extract the required circuit parameters of the amplifier through electromagnetic modelling, and determine the parametric gain-bandwidth product of the amplifier using an analytical model. Finally, we discuss the various design aspects that affect the overall performance of the amplifier.